! Started logfile: J0547+2721_S_2017_05_27_pus_uvs.log on Fri May 3 10:58:03 2019 obs J0547+2721_S_2017_05_27_pus_uva.fits ! Reading UV FITS file: J0547+2721_S_2017_05_27_pus_uva.fits ! AN table 1: 8 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.572222 visibilities/baseline/integration-bin. ! Found source: J0547+2721 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1211 lines of history. ! ! Reading 824 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0547+2721_S_2017_05_27_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 19 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 19 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 19 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 52 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.635265Jy sigma=0.005628 ! Fit after self-cal, rms=0.628444Jy sigma=0.005567 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=5.108 mas, bmaj=10.32 mas, bpa=5.28 degrees ! Estimated noise=4075.87 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.290387 Jy ! Component: 100 - total flux cleaned = 0.354239 Jy ! Total flux subtracted in 100 components = 0.354239 Jy ! Clean residual min=-0.017536 max=0.020195 Jy/beam ! Clean residual mean=-0.000072 rms=0.005573 Jy/beam ! Combined flux in latest and established models = 0.354239 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.354239 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088920Jy sigma=0.000754 ! Fit after self-cal, rms=0.088883Jy sigma=0.000753 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=6.006 mas, bmaj=10.85 mas, bpa=3.198 degrees ! Estimated noise=3142.58 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0239636 Jy ! Component: 100 - total flux cleaned = 0.0342909 Jy ! Component: 150 - total flux cleaned = 0.0384663 Jy ! Component: 200 - total flux cleaned = 0.0394647 Jy ! Total flux subtracted in 200 components = 0.0394647 Jy ! Clean residual min=-0.011195 max=0.011358 Jy/beam ! Clean residual mean=-0.000011 rms=0.003019 Jy/beam ! Combined flux in latest and established models = 0.393704 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 32 components and 0.393704 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082764Jy sigma=0.000700 ! Fit after self-cal, rms=0.082728Jy sigma=0.000699 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.94 HN 1.00* KP 1.01 ! LA 0.97 MK 0.99 NL 0.94 OV 1.06 ! PT 1.02 SC 1.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.01 HN 1.00* KP 0.96 ! LA 0.91 MK 1.03 NL 1.06 OV 1.05 ! PT 1.02 SC 1.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.01 HN 1.00* KP 1.01 ! LA 0.98 MK 1.03 NL 1.00 OV 0.94 ! PT 0.98 SC 1.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.08 HN 1.00* KP 1.00* ! LA 1.07 MK 0.97 NL 1.00* OV 1.00* ! PT 1.03 SC 1.00* ! ! ! Fit before self-cal, rms=0.082728Jy sigma=0.000699 ! Fit after self-cal, rms=0.079121Jy sigma=0.000670 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=6.046 mas, bmaj=10.83 mas, bpa=3.188 degrees ! Estimated noise=3131.34 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000403362 Jy ! Component: 100 - total flux cleaned = -0.000621269 Jy ! Component: 150 - total flux cleaned = -0.00053005 Jy ! Component: 200 - total flux cleaned = -0.000589363 Jy ! Total flux subtracted in 200 components = -0.000589363 Jy ! Clean residual min=-0.008870 max=0.009792 Jy/beam ! Clean residual mean=0.000022 rms=0.002575 Jy/beam ! Combined flux in latest and established models = 0.393115 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 41 components and 0.393115 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078863Jy sigma=0.000668 ! Fit after self-cal, rms=0.078852Jy sigma=0.000667 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078852Jy sigma=0.000667 ! Fit after self-cal, rms=0.078964Jy sigma=0.000667 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.053 mas, bmaj=10.82 mas, bpa=3.169 degrees ! Estimated noise=3134.46 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000441411 Jy ! Component: 100 - total flux cleaned = 0.000440057 Jy ! Component: 150 - total flux cleaned = 0.000400168 Jy ! Component: 200 - total flux cleaned = 0.000363558 Jy ! Total flux subtracted in 200 components = 0.000363558 Jy ! Clean residual min=-0.008806 max=0.009979 Jy/beam ! Clean residual mean=0.000023 rms=0.002537 Jy/beam ! Combined flux in latest and established models = 0.393478 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 49 components and 0.393478 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078899Jy sigma=0.000667 ! Fit after self-cal, rms=0.078903Jy sigma=0.000666 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000113133 Jy ! Component: 100 - total flux cleaned = 7.81774e-05 Jy ! Component: 150 - total flux cleaned = 4.78246e-05 Jy ! Component: 200 - total flux cleaned = 4.72029e-05 Jy ! Total flux subtracted in 200 components = 4.72029e-05 Jy ! Clean residual min=-0.008818 max=0.010012 Jy/beam ! Clean residual mean=0.000023 rms=0.002524 Jy/beam ! Combined flux in latest and established models = 0.393525 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 55 components and 0.393526 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078877Jy sigma=0.000666 ! Fit after self-cal, rms=0.078878Jy sigma=0.000666 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078878Jy sigma=0.000666 ! Fit after self-cal, rms=0.078942Jy sigma=0.000666 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.057 mas, bmaj=10.81 mas, bpa=3.164 degrees ! Estimated noise=3136.73 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000464158 Jy ! Component: 100 - total flux cleaned = 0.000405126 Jy ! Component: 150 - total flux cleaned = 0.000321919 Jy ! Component: 200 - total flux cleaned = 0.000322666 Jy ! Total flux subtracted in 200 components = 0.000322666 Jy ! Clean residual min=-0.008797 max=0.010050 Jy/beam ! Clean residual mean=0.000024 rms=0.002514 Jy/beam ! Combined flux in latest and established models = 0.393848 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 66 components and 0.393848 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078924Jy sigma=0.000666 ! Fit after self-cal, rms=0.078925Jy sigma=0.000666 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.52462e-05 Jy ! Component: 100 - total flux cleaned = -2.59496e-05 Jy ! Component: 150 - total flux cleaned = -2.68749e-05 Jy ! Component: 200 - total flux cleaned = -5.22335e-05 Jy ! Total flux subtracted in 200 components = -5.22335e-05 Jy ! Clean residual min=-0.008766 max=0.010018 Jy/beam ! Clean residual mean=0.000024 rms=0.002507 Jy/beam ! Combined flux in latest and established models = 0.393796 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 68 components and 0.393796 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078911Jy sigma=0.000666 ! Fit after self-cal, rms=0.078911Jy sigma=0.000666 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078911Jy sigma=0.000666 ! Fit after self-cal, rms=0.078964Jy sigma=0.000666 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.807 mas, bmaj=11.5 mas, bpa=3.291 degrees ! Estimated noise=3274.87 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000711039 Jy ! Component: 100 - total flux cleaned = 0.000753086 Jy ! Component: 150 - total flux cleaned = 0.000752125 Jy ! Component: 200 - total flux cleaned = 0.000752081 Jy ! Total flux subtracted in 200 components = 0.000752081 Jy ! Clean residual min=-0.008163 max=0.010481 Jy/beam ! Clean residual mean=0.000033 rms=0.002601 Jy/beam ! Combined flux in latest and established models = 0.394548 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 71 components and 0.394548 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078978Jy sigma=0.000666 ! Fit after self-cal, rms=0.078975Jy sigma=0.000666 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.33748e-05 Jy ! Component: 100 - total flux cleaned = -7.51661e-06 Jy ! Component: 150 - total flux cleaned = -8.16993e-06 Jy ! Component: 200 - total flux cleaned = 1.94281e-05 Jy ! Total flux subtracted in 200 components = 1.94281e-05 Jy ! Clean residual min=-0.008221 max=0.010485 Jy/beam ! Clean residual mean=0.000032 rms=0.002585 Jy/beam ! Combined flux in latest and established models = 0.394568 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 72 components and 0.394568 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078983Jy sigma=0.000666 ! Fit after self-cal, rms=0.078978Jy sigma=0.000665 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=6.062 mas, bmaj=10.8 mas, bpa=3.166 degrees ! Estimated noise=3138.73 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 6.062 x 10.8 at 3.166 degrees (North through East) ! Clean map min=-0.0088022 max=0.37558 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=5.146 mas, bmaj=10.27 mas, bpa=5.207 degrees ! Estimated noise=4075.08 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.290321 Jy ! Component: 100 - total flux cleaned = 0.353965 Jy ! Component: 150 - total flux cleaned = 0.373337 Jy ! Component: 200 - total flux cleaned = 0.382958 Jy ! Total flux subtracted in 200 components = 0.382958 Jy ! Clean residual min=-0.011867 max=0.013320 Jy/beam ! Clean residual mean=-0.000016 rms=0.003832 Jy/beam ! Combined flux in latest and established models = 0.382958 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.382958 Jy ! Inverting map and beam ! Estimated beam: bmin=6.062 mas, bmaj=10.8 mas, bpa=3.166 degrees ! Estimated noise=3138.73 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0076236 Jy ! Component: 100 - total flux cleaned = 0.0092616 Jy ! Component: 150 - total flux cleaned = 0.00955609 Jy ! Component: 200 - total flux cleaned = 0.00988931 Jy ! Total flux subtracted in 200 components = 0.00988931 Jy ! Clean residual min=-0.009082 max=0.010522 Jy/beam ! Clean residual mean=0.000016 rms=0.002589 Jy/beam ! Combined flux in latest and established models = 0.392847 Jy ! Adding 24 model components to the UV plane model. ! The established model now contains 42 components and 0.392847 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.807 mas, bmaj=11.5 mas, bpa=3.291 degrees ! Estimated noise=3274.87 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00168787 Jy ! Component: 100 - total flux cleaned = 0.00200946 Jy ! Component: 150 - total flux cleaned = 0.0020115 Jy ! Component: 200 - total flux cleaned = 0.00196121 Jy ! Total flux subtracted in 200 components = 0.00196121 Jy ! Clean residual min=-0.008568 max=0.010737 Jy/beam ! Clean residual mean=0.000028 rms=0.002617 Jy/beam ! Combined flux in latest and established models = 0.394808 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.53422e-06 Jy ! Component: 100 - total flux cleaned = -2.48841e-06 Jy ! Component: 150 - total flux cleaned = 3.43671e-05 Jy ! Component: 200 - total flux cleaned = 6.76762e-05 Jy ! Total flux subtracted in 200 components = 6.76762e-05 Jy ! Clean residual min=-0.008491 max=0.010561 Jy/beam ! Clean residual mean=0.000029 rms=0.002597 Jy/beam ! Combined flux in latest and established models = 0.394876 Jy ! Adding 23 model components to the UV plane model. ! The established model now contains 61 components and 0.394876 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=6.062 mas, bmaj=10.8 mas, bpa=3.166 degrees ! Estimated noise=3138.73 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00104242 Jy ! Component: 100 - total flux cleaned = -0.000884984 Jy ! Component: 150 - total flux cleaned = -0.00079664 Jy ! Component: 200 - total flux cleaned = -0.000759346 Jy ! Total flux subtracted in 200 components = -0.000759346 Jy ! Clean residual min=-0.008815 max=0.010112 Jy/beam ! Clean residual mean=0.000024 rms=0.002499 Jy/beam ! Combined flux in latest and established models = 0.394117 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 74 components and 0.394117 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079002Jy sigma=0.000666 ! Fit after self-cal, rms=0.078987Jy sigma=0.000666 wmodel J0547+2721_S_2017_05_27_pus_map.mod ! Writing 74 model components to file: J0547+2721_S_2017_05_27_pus_map.mod wobs J0547+2721_S_2017_05_27_pus_uvs.fits ! Writing UV FITS file: J0547+2721_S_2017_05_27_pus_uvs.fits wwins J0547+2721_S_2017_05_27_pus_map.win ! wwins: Wrote 1 windows to J0547+2721_S_2017_05_27_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00129375 Jy ! Component: 100 - total flux cleaned = 0.00197227 Jy ! Component: 150 - total flux cleaned = 0.00348223 Jy ! Component: 200 - total flux cleaned = 0.00486981 Jy ! Component: 250 - total flux cleaned = 0.00540009 Jy ! Component: 300 - total flux cleaned = 0.00579876 Jy ! Component: 350 - total flux cleaned = 0.00570781 Jy ! Component: 400 - total flux cleaned = 0.0057993 Jy ! Component: 450 - total flux cleaned = 0.00604751 Jy ! Component: 500 - total flux cleaned = 0.00620506 Jy ! Component: 550 - total flux cleaned = 0.00650422 Jy ! Component: 600 - total flux cleaned = 0.00671633 Jy ! Component: 650 - total flux cleaned = 0.00678483 Jy ! Component: 700 - total flux cleaned = 0.00678479 Jy ! Component: 750 - total flux cleaned = 0.00672206 Jy ! Component: 800 - total flux cleaned = 0.00683677 Jy ! Component: 850 - total flux cleaned = 0.00689168 Jy ! Component: 900 - total flux cleaned = 0.00689179 Jy ! Component: 950 - total flux cleaned = 0.00699888 Jy ! Component: 1000 - total flux cleaned = 0.0069984 Jy ! Component: 1050 - total flux cleaned = 0.00699944 Jy ! Component: 1100 - total flux cleaned = 0.00709538 Jy ! Component: 1150 - total flux cleaned = 0.00700287 Jy ! Component: 1200 - total flux cleaned = 0.00704846 Jy ! Component: 1250 - total flux cleaned = 0.00709272 Jy ! Component: 1300 - total flux cleaned = 0.00713579 Jy ! Component: 1350 - total flux cleaned = 0.00722024 Jy ! Component: 1400 - total flux cleaned = 0.00734329 Jy ! Component: 1450 - total flux cleaned = 0.00742339 Jy ! Component: 1500 - total flux cleaned = 0.00757999 Jy ! Component: 1550 - total flux cleaned = 0.00758025 Jy ! Component: 1600 - total flux cleaned = 0.00765585 Jy ! Component: 1650 - total flux cleaned = 0.00776631 Jy ! Component: 1700 - total flux cleaned = 0.00765754 Jy ! Component: 1750 - total flux cleaned = 0.00779985 Jy ! Component: 1800 - total flux cleaned = 0.00765937 Jy ! Component: 1850 - total flux cleaned = 0.00762508 Jy ! Component: 1900 - total flux cleaned = 0.00755743 Jy ! Component: 1950 - total flux cleaned = 0.00755735 Jy ! Component: 2000 - total flux cleaned = 0.00752408 Jy ! Component: 2050 - total flux cleaned = 0.00758902 Jy ! Component: 2100 - total flux cleaned = 0.00762106 Jy ! Component: 2150 - total flux cleaned = 0.00768493 Jy ! Component: 2200 - total flux cleaned = 0.00778011 Jy ! Component: 2250 - total flux cleaned = 0.00781161 Jy ! Component: 2300 - total flux cleaned = 0.00793621 Jy ! Component: 2350 - total flux cleaned = 0.00799776 Jy ! Component: 2400 - total flux cleaned = 0.0080899 Jy ! Component: 2450 - total flux cleaned = 0.00824225 Jy ! Component: 2500 - total flux cleaned = 0.00833325 Jy ! Component: 2550 - total flux cleaned = 0.00854414 Jy ! Component: 2600 - total flux cleaned = 0.00863392 Jy ! Component: 2650 - total flux cleaned = 0.00875331 Jy ! Component: 2700 - total flux cleaned = 0.00878303 Jy ! Component: 2750 - total flux cleaned = 0.00878325 Jy ! Component: 2800 - total flux cleaned = 0.00878306 Jy ! Component: 2850 - total flux cleaned = 0.00875342 Jy ! Component: 2900 - total flux cleaned = 0.00869489 Jy ! Component: 2950 - total flux cleaned = 0.00875339 Jy ! Component: 3000 - total flux cleaned = 0.00878251 Jy ! Component: 3050 - total flux cleaned = 0.00878244 Jy ! Component: 3100 - total flux cleaned = 0.00881147 Jy ! Component: 3150 - total flux cleaned = 0.00886957 Jy ! Component: 3200 - total flux cleaned = 0.00889868 Jy ! Component: 3250 - total flux cleaned = 0.00892768 Jy ! Component: 3300 - total flux cleaned = 0.00886973 Jy ! Component: 3350 - total flux cleaned = 0.00886972 Jy ! Component: 3400 - total flux cleaned = 0.00884077 Jy ! Component: 3450 - total flux cleaned = 0.00886978 Jy ! Component: 3500 - total flux cleaned = 0.00884071 Jy ! Component: 3550 - total flux cleaned = 0.00886977 Jy ! Component: 3600 - total flux cleaned = 0.00889863 Jy ! Component: 3650 - total flux cleaned = 0.00886966 Jy ! Component: 3700 - total flux cleaned = 0.0087823 Jy ! Component: 3750 - total flux cleaned = 0.00884043 Jy ! Component: 3800 - total flux cleaned = 0.00886948 Jy ! Component: 3850 - total flux cleaned = 0.00886936 Jy ! Component: 3900 - total flux cleaned = 0.00889837 Jy ! Component: 3950 - total flux cleaned = 0.00889836 Jy ! Component: 4000 - total flux cleaned = 0.00892756 Jy ! Component: 4050 - total flux cleaned = 0.00895695 Jy ! Total flux subtracted in 4096 components = 0.00898621 Jy ! Clean residual min=-0.001661 max=0.001654 Jy/beam ! Clean residual mean=-0.000006 rms=0.000480 Jy/beam ! Combined flux in latest and established models = 0.403103 Jy keep ! Adding 254 model components to the UV plane model. ! The established model now contains 328 components and 0.403103 Jy ![Exited script file: muppet] wmap "J0547+2721_S_2017_05_27_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 6.062 x 10.8 at 3.166 degrees (North through East) ! Clean map min=-0.0038751 max=0.37645 Jy/beam ! Writing clean map to FITS file: J0547+2721_S_2017_05_27_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.376449 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000443294 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.35327 0.35327 0.706539 1.41308 2.82616 5.65231 11.3046 22.6093 45.2185 90.437 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0013 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.376 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 6.062 x 10.8 at 3.166 degrees (North through East) ! Clean map min=-0.0038751 max=0.37645 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0547+2721_S_2017_05_27_pus_uvs.log closed on Fri May 3 10:58:08 2019