! Started logfile: J0547+1223_S_2017_02_24_pus_uvs.log on Sat May 4 11:19:32 2019 obs J0547+1223_S_2017_02_24_pus_uva.fits ! Reading UV FITS file: J0547+1223_S_2017_02_24_pus_uva.fits ! AN table 1: 75 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.967407 visibilities/baseline/integration-bin. ! Found source: J0547+1223 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 823 lines of history. ! ! Reading 13060 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0547+1223_S_2017_02_24_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 14 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 14 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 14 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 251 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.925065Jy sigma=0.008600 ! Fit after self-cal, rms=0.917485Jy sigma=0.008548 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.286 mas, bmaj=6.582 mas, bpa=-5.394 degrees ! Estimated noise=1068.2 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0633542 Jy ! Component: 100 - total flux cleaned = 0.0800843 Jy ! Total flux subtracted in 100 components = 0.0800843 Jy ! Clean residual min=-0.004701 max=0.007256 Jy/beam ! Clean residual mean=-0.000041 rms=0.001293 Jy/beam ! Combined flux in latest and established models = 0.0800843 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.0800843 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087518Jy sigma=0.000725 ! Fit after self-cal, rms=0.087498Jy sigma=0.000725 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.88 mas, bmaj=7.392 mas, bpa=-4.021 degrees ! Estimated noise=776.285 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0101206 Jy ! Component: 100 - total flux cleaned = 0.0145023 Jy ! Component: 150 - total flux cleaned = 0.0164963 Jy ! Component: 200 - total flux cleaned = 0.0175568 Jy ! Total flux subtracted in 200 components = 0.0175568 Jy ! Clean residual min=-0.003185 max=0.004015 Jy/beam ! Clean residual mean=-0.000025 rms=0.000911 Jy/beam ! Combined flux in latest and established models = 0.097641 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 26 components and 0.097641 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086188Jy sigma=0.000731 ! Fit after self-cal, rms=0.086172Jy sigma=0.000731 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.94 HN 1.07 KP 0.93 ! LA 0.93 MK 0.91 NL 1.03 OV 1.05 ! PT 1.00 SC 0.90 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.91 HN 1.05 KP 0.88 ! LA 0.89 MK 1.32 NL 1.03 OV 1.06 ! PT 0.98 SC 1.04 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 0.90 HN 1.02 KP 0.99 ! LA 1.00 MK 1.04 NL 1.05 OV 0.96 ! PT 0.98 SC 0.98 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 3.16 HN 0.85 KP 1.00* ! LA 0.95 MK 0.89 NL 1.00* OV 1.07 ! PT 1.00 SC 1.00* ! ! ! Fit before self-cal, rms=0.086172Jy sigma=0.000731 ! Fit after self-cal, rms=0.097599Jy sigma=0.000683 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.875 mas, bmaj=7.387 mas, bpa=-3.138 degrees ! Estimated noise=788.484 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00191812 Jy ! Component: 100 - total flux cleaned = 0.00217514 Jy ! Component: 150 - total flux cleaned = 0.00214431 Jy ! Component: 200 - total flux cleaned = 0.00217164 Jy ! Total flux subtracted in 200 components = 0.00217164 Jy ! Clean residual min=-0.002564 max=0.003023 Jy/beam ! Clean residual mean=-0.000016 rms=0.000701 Jy/beam ! Combined flux in latest and established models = 0.0998127 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 34 components and 0.0998127 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097479Jy sigma=0.000683 ! Fit after self-cal, rms=0.097728Jy sigma=0.000681 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097728Jy sigma=0.000681 ! Fit after self-cal, rms=0.102541Jy sigma=0.000673 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.861 mas, bmaj=7.366 mas, bpa=-4.158 degrees ! Estimated noise=788.802 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000701017 Jy ! Component: 100 - total flux cleaned = 0.000782728 Jy ! Component: 150 - total flux cleaned = 0.000784621 Jy ! Component: 200 - total flux cleaned = 0.000763174 Jy ! Total flux subtracted in 200 components = 0.000763174 Jy ! Clean residual min=-0.002176 max=0.002378 Jy/beam ! Clean residual mean=-0.000007 rms=0.000552 Jy/beam ! Combined flux in latest and established models = 0.100576 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 42 components and 0.100576 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102518Jy sigma=0.000673 ! Fit after self-cal, rms=0.102557Jy sigma=0.000673 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-111, 14.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00139608 Jy ! Component: 100 - total flux cleaned = 0.00156077 Jy ! Component: 150 - total flux cleaned = 0.00170099 Jy ! Component: 200 - total flux cleaned = 0.00178261 Jy ! Total flux subtracted in 200 components = 0.00178261 Jy ! Clean residual min=-0.002021 max=0.002216 Jy/beam ! Clean residual mean=-0.000009 rms=0.000520 Jy/beam ! Combined flux in latest and established models = 0.102358 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 67 components and 0.102358 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102470Jy sigma=0.000672 ! Fit after self-cal, rms=0.102466Jy sigma=0.000672 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102466Jy sigma=0.000672 ! Fit after self-cal, rms=0.104030Jy sigma=0.000672 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.851 mas, bmaj=7.363 mas, bpa=-4.46 degrees ! Estimated noise=790.149 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000435803 Jy ! Component: 100 - total flux cleaned = 0.00065524 Jy ! Component: 150 - total flux cleaned = 0.000752717 Jy ! Component: 200 - total flux cleaned = 0.000841682 Jy ! Total flux subtracted in 200 components = 0.000841682 Jy ! Clean residual min=-0.001997 max=0.002094 Jy/beam ! Clean residual mean=-0.000010 rms=0.000517 Jy/beam ! Combined flux in latest and established models = 0.1032 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 75 components and 0.1032 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103985Jy sigma=0.000672 ! Fit after self-cal, rms=0.103990Jy sigma=0.000672 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.36734e-05 Jy ! Component: 100 - total flux cleaned = 0.000149096 Jy ! Component: 150 - total flux cleaned = 0.000224671 Jy ! Component: 200 - total flux cleaned = 0.000248224 Jy ! Total flux subtracted in 200 components = 0.000248224 Jy ! Clean residual min=-0.001981 max=0.002040 Jy/beam ! Clean residual mean=-0.000010 rms=0.000514 Jy/beam ! Combined flux in latest and established models = 0.103448 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 86 components and 0.103448 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103965Jy sigma=0.000672 ! Fit after self-cal, rms=0.103966Jy sigma=0.000672 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103966Jy sigma=0.000672 ! Fit after self-cal, rms=0.104612Jy sigma=0.000672 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.774 mas, bmaj=10.81 mas, bpa=-2.616 degrees ! Estimated noise=940.684 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000784855 Jy ! Component: 100 - total flux cleaned = 0.000979423 Jy ! Component: 150 - total flux cleaned = 0.00117194 Jy ! Component: 200 - total flux cleaned = 0.00125754 Jy ! Total flux subtracted in 200 components = 0.00125754 Jy ! Clean residual min=-0.002257 max=0.002198 Jy/beam ! Clean residual mean=-0.000015 rms=0.000621 Jy/beam ! Combined flux in latest and established models = 0.104706 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 102 components and 0.104706 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104569Jy sigma=0.000672 ! Fit after self-cal, rms=0.104575Jy sigma=0.000672 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.88532e-05 Jy ! Component: 100 - total flux cleaned = -2.47205e-05 Jy ! Component: 150 - total flux cleaned = -6.64658e-05 Jy ! Component: 200 - total flux cleaned = -9.07909e-05 Jy ! Total flux subtracted in 200 components = -9.07909e-05 Jy ! Clean residual min=-0.002235 max=0.002241 Jy/beam ! Clean residual mean=-0.000015 rms=0.000620 Jy/beam ! Combined flux in latest and established models = 0.104615 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 105 components and 0.104615 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104569Jy sigma=0.000672 ! Fit after self-cal, rms=0.104575Jy sigma=0.000672 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.847 mas, bmaj=7.365 mas, bpa=-4.669 degrees ! Estimated noise=792.099 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.847 x 7.365 at -4.669 degrees (North through East) ! Clean map min=-0.0019256 max=0.0853 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.233 mas, bmaj=6.557 mas, bpa=-6.6 degrees ! Estimated noise=1085.67 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0640928 Jy ! Component: 100 - total flux cleaned = 0.0828932 Jy ! Component: 150 - total flux cleaned = 0.0918839 Jy ! Component: 200 - total flux cleaned = 0.0966086 Jy ! Total flux subtracted in 200 components = 0.0966086 Jy ! Clean residual min=-0.002802 max=0.003390 Jy/beam ! Clean residual mean=-0.000012 rms=0.000751 Jy/beam ! Combined flux in latest and established models = 0.0966087 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.0966087 Jy ! Inverting map and beam ! Estimated beam: bmin=3.847 mas, bmaj=7.365 mas, bpa=-4.669 degrees ! Estimated noise=792.099 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (4.5, 0). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00385672 Jy ! Component: 100 - total flux cleaned = 0.00567143 Jy ! Component: 150 - total flux cleaned = 0.00627869 Jy ! Component: 200 - total flux cleaned = 0.00679906 Jy ! Total flux subtracted in 200 components = 0.00679906 Jy ! Clean residual min=-0.002009 max=0.002118 Jy/beam ! Clean residual mean=-0.000010 rms=0.000528 Jy/beam ! Combined flux in latest and established models = 0.103408 Jy ! Adding 26 model components to the UV plane model. ! The established model now contains 40 components and 0.103408 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.774 mas, bmaj=10.81 mas, bpa=-2.616 degrees ! Estimated noise=940.684 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000349202 Jy ! Component: 100 - total flux cleaned = 0.000960048 Jy ! Component: 150 - total flux cleaned = 0.00144103 Jy ! Component: 200 - total flux cleaned = 0.00154017 Jy ! Total flux subtracted in 200 components = 0.00154017 Jy ! Clean residual min=-0.002176 max=0.002093 Jy/beam ! Clean residual mean=-0.000012 rms=0.000604 Jy/beam ! Combined flux in latest and established models = 0.104948 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.48298e-07 Jy ! Component: 100 - total flux cleaned = 2.62471e-05 Jy ! Component: 150 - total flux cleaned = 7.29908e-05 Jy ! Component: 200 - total flux cleaned = 9.3681e-05 Jy ! Total flux subtracted in 200 components = 9.3681e-05 Jy ! Clean residual min=-0.002156 max=0.002104 Jy/beam ! Clean residual mean=-0.000011 rms=0.000599 Jy/beam ! Combined flux in latest and established models = 0.105042 Jy ! Adding 55 model components to the UV plane model. ! The established model now contains 85 components and 0.105042 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.847 mas, bmaj=7.365 mas, bpa=-4.669 degrees ! Estimated noise=792.099 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000148568 Jy ! Component: 100 - total flux cleaned = -0.000186265 Jy ! Component: 150 - total flux cleaned = -0.000185685 Jy ! Component: 200 - total flux cleaned = -0.000186843 Jy ! Total flux subtracted in 200 components = -0.000186843 Jy ! Clean residual min=-0.001822 max=0.001946 Jy/beam ! Clean residual mean=-0.000006 rms=0.000495 Jy/beam ! Combined flux in latest and established models = 0.104855 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 102 components and 0.104855 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104559Jy sigma=0.000672 ! Fit after self-cal, rms=0.104544Jy sigma=0.000672 wmodel J0547+1223_S_2017_02_24_pus_map.mod ! Writing 102 model components to file: J0547+1223_S_2017_02_24_pus_map.mod wobs J0547+1223_S_2017_02_24_pus_uvs.fits ! Writing UV FITS file: J0547+1223_S_2017_02_24_pus_uvs.fits wwins J0547+1223_S_2017_02_24_pus_map.win ! wwins: Wrote 3 windows to J0547+1223_S_2017_02_24_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000593107 Jy ! Component: 100 - total flux cleaned = 0.000763092 Jy ! Component: 150 - total flux cleaned = 0.000892457 Jy ! Component: 200 - total flux cleaned = 0.00110828 Jy ! Component: 250 - total flux cleaned = 0.00125697 Jy ! Component: 300 - total flux cleaned = 0.00128542 Jy ! Component: 350 - total flux cleaned = 0.00131309 Jy ! Component: 400 - total flux cleaned = 0.00128592 Jy ! Component: 450 - total flux cleaned = 0.00131236 Jy ! Component: 500 - total flux cleaned = 0.00131206 Jy ! Component: 550 - total flux cleaned = 0.00128703 Jy ! Component: 600 - total flux cleaned = 0.00126265 Jy ! Component: 650 - total flux cleaned = 0.00128748 Jy ! Component: 700 - total flux cleaned = 0.00123978 Jy ! Component: 750 - total flux cleaned = 0.00121671 Jy ! Component: 800 - total flux cleaned = 0.00117007 Jy ! Component: 850 - total flux cleaned = 0.00116984 Jy ! Component: 900 - total flux cleaned = 0.00114714 Jy ! Component: 950 - total flux cleaned = 0.00114681 Jy ! Component: 1000 - total flux cleaned = 0.00114669 Jy ! Component: 1050 - total flux cleaned = 0.00121099 Jy ! Component: 1100 - total flux cleaned = 0.00114704 Jy ! Component: 1150 - total flux cleaned = 0.00118918 Jy ! Component: 1200 - total flux cleaned = 0.00116826 Jy ! Component: 1250 - total flux cleaned = 0.00112749 Jy ! Component: 1300 - total flux cleaned = 0.0011881 Jy ! Component: 1350 - total flux cleaned = 0.00112805 Jy ! Component: 1400 - total flux cleaned = 0.00112859 Jy ! Component: 1450 - total flux cleaned = 0.00114823 Jy ! Component: 1500 - total flux cleaned = 0.00114816 Jy ! Component: 1550 - total flux cleaned = 0.00128102 Jy ! Component: 1600 - total flux cleaned = 0.00126183 Jy ! Component: 1650 - total flux cleaned = 0.00120604 Jy ! Component: 1700 - total flux cleaned = 0.00124306 Jy ! Component: 1750 - total flux cleaned = 0.00135209 Jy ! Component: 1800 - total flux cleaned = 0.00131592 Jy ! Component: 1850 - total flux cleaned = 0.00133343 Jy ! Component: 1900 - total flux cleaned = 0.00128048 Jy ! Component: 1950 - total flux cleaned = 0.00129798 Jy ! Component: 2000 - total flux cleaned = 0.00126358 Jy ! Component: 2050 - total flux cleaned = 0.00124635 Jy ! Component: 2100 - total flux cleaned = 0.001297 Jy ! Component: 2150 - total flux cleaned = 0.00128027 Jy ! Component: 2200 - total flux cleaned = 0.00128027 Jy ! Component: 2250 - total flux cleaned = 0.0013628 Jy ! Component: 2300 - total flux cleaned = 0.00134651 Jy ! Component: 2350 - total flux cleaned = 0.00142747 Jy ! Component: 2400 - total flux cleaned = 0.00145958 Jy ! Component: 2450 - total flux cleaned = 0.00152331 Jy ! Component: 2500 - total flux cleaned = 0.00160228 Jy ! Component: 2550 - total flux cleaned = 0.00164914 Jy ! Component: 2600 - total flux cleaned = 0.00171131 Jy ! Component: 2650 - total flux cleaned = 0.00174229 Jy ! Component: 2700 - total flux cleaned = 0.00180357 Jy ! Component: 2750 - total flux cleaned = 0.00187948 Jy ! Component: 2800 - total flux cleaned = 0.0019396 Jy ! Component: 2850 - total flux cleaned = 0.00202929 Jy ! Component: 2900 - total flux cleaned = 0.00210345 Jy ! Component: 2950 - total flux cleaned = 0.00222132 Jy ! Component: 3000 - total flux cleaned = 0.00227966 Jy ! Component: 3050 - total flux cleaned = 0.00236685 Jy ! Component: 3100 - total flux cleaned = 0.0024101 Jy ! Component: 3150 - total flux cleaned = 0.00253896 Jy ! Component: 3200 - total flux cleaned = 0.00260991 Jy ! Component: 3250 - total flux cleaned = 0.00266633 Jy ! Component: 3300 - total flux cleaned = 0.00282054 Jy ! Component: 3350 - total flux cleaned = 0.00284823 Jy ! Component: 3400 - total flux cleaned = 0.00301445 Jy ! Component: 3450 - total flux cleaned = 0.00308298 Jy ! Component: 3500 - total flux cleaned = 0.00311019 Jy ! Component: 3550 - total flux cleaned = 0.00320528 Jy ! Component: 3600 - total flux cleaned = 0.00327267 Jy ! Component: 3650 - total flux cleaned = 0.00338 Jy ! Component: 3700 - total flux cleaned = 0.00348655 Jy ! Component: 3750 - total flux cleaned = 0.00351305 Jy ! Component: 3800 - total flux cleaned = 0.00360529 Jy ! Component: 3850 - total flux cleaned = 0.00367067 Jy ! Component: 3900 - total flux cleaned = 0.00370979 Jy ! Component: 3950 - total flux cleaned = 0.00376164 Jy ! Component: 4000 - total flux cleaned = 0.00380019 Jy ! Component: 4050 - total flux cleaned = 0.00382579 Jy ! Total flux subtracted in 4096 components = 0.00391494 Jy ! Clean residual min=-0.000867 max=0.000759 Jy/beam ! Clean residual mean=-0.000003 rms=0.000236 Jy/beam ! Combined flux in latest and established models = 0.10877 Jy keep ! Adding 297 model components to the UV plane model. ! The established model now contains 399 components and 0.10877 Jy ![Exited script file: muppet] wmap "J0547+1223_S_2017_02_24_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.847 x 7.365 at -4.669 degrees (North through East) ! Clean map min=-0.0018331 max=0.085231 Jy/beam ! Writing clean map to FITS file: J0547+1223_S_2017_02_24_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0852312 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000232011 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.816642 0.816642 1.63328 3.26657 6.53313 13.0663 26.1325 52.2651 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.085 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.847 x 7.365 at -4.669 degrees (North through East) ! Clean map min=-0.0018331 max=0.085231 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0547+1223_S_2017_02_24_pus_uvs.log closed on Sat May 4 11:19:37 2019