! Started logfile: J0541+6745_S_2017_07_09_pus_uvs.log on Wed May 8 14:43:08 2019 obs J0541+6745_S_2017_07_09_pus_uva.fits ! Reading UV FITS file: J0541+6745_S_2017_07_09_pus_uva.fits ! AN table 1: 114 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.922417 visibilities/baseline/integration-bin. ! Found source: J0541+6745 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 594 lines of history. ! ! Reading 18928 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0541+6745_S_2017_07_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 49 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 98 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 84 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 685 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.957895Jy sigma=0.008828 ! Fit after self-cal, rms=0.940928Jy sigma=0.008685 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.321 mas, bmaj=3.645 mas, bpa=30.82 degrees ! Estimated noise=1090.42 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0471908 Jy ! Component: 100 - total flux cleaned = 0.057981 Jy ! Total flux subtracted in 100 components = 0.057981 Jy ! Clean residual min=-0.003424 max=0.003817 Jy/beam ! Clean residual mean=-0.000003 rms=0.000837 Jy/beam ! Combined flux in latest and established models = 0.057981 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.057981 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076282Jy sigma=0.000670 ! Fit after self-cal, rms=0.076202Jy sigma=0.000669 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.984 mas, bmaj=4.468 mas, bpa=31.44 degrees ! Estimated noise=647.415 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00487551 Jy ! Component: 100 - total flux cleaned = 0.00732059 Jy ! Component: 150 - total flux cleaned = 0.00867646 Jy ! Component: 200 - total flux cleaned = 0.00946744 Jy ! Total flux subtracted in 200 components = 0.00946744 Jy ! Clean residual min=-0.001916 max=0.001965 Jy/beam ! Clean residual mean=-0.000003 rms=0.000454 Jy/beam ! Combined flux in latest and established models = 0.0674485 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 36 components and 0.0674485 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075899Jy sigma=0.000666 ! Fit after self-cal, rms=0.075899Jy sigma=0.000666 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.96 HN 0.98 KP 0.97 ! LA 0.99 MK 1.02 NL 0.90 OV 0.99 ! PT 1.00 SC 0.94 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.97 HN 1.09 KP 0.98 ! LA 0.99 MK 1.04 NL 1.03 OV 1.09 ! PT 1.01 SC 1.15 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.09 HN 1.01 KP 0.95 ! LA 0.97 MK 1.11 NL 1.03 OV 0.98 ! PT 0.97 SC 0.97 ! ! ! Correcting IF 4. ! A total of 69 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.06 HN 0.88 KP 1.00* ! LA 0.96 MK 0.86 NL 1.00* OV 1.00* ! PT 0.95 SC 1.00* ! ! ! Fit before self-cal, rms=0.075899Jy sigma=0.000666 ! Fit after self-cal, rms=0.075924Jy sigma=0.000665 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.032 mas, bmaj=4.484 mas, bpa=31.96 degrees ! Estimated noise=650.457 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000310842 Jy ! Component: 100 - total flux cleaned = 0.000348185 Jy ! Component: 150 - total flux cleaned = 0.000347706 Jy ! Component: 200 - total flux cleaned = 0.000356764 Jy ! Total flux subtracted in 200 components = 0.000356764 Jy ! Clean residual min=-0.001825 max=0.001701 Jy/beam ! Clean residual mean=-0.000002 rms=0.000426 Jy/beam ! Combined flux in latest and established models = 0.0678052 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 43 components and 0.0678052 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075920Jy sigma=0.000665 ! Fit after self-cal, rms=0.075926Jy sigma=0.000665 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075926Jy sigma=0.000665 ! Fit after self-cal, rms=0.076048Jy sigma=0.000664 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.029 mas, bmaj=4.486 mas, bpa=34.1 degrees ! Estimated noise=650.528 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000218794 Jy ! Component: 100 - total flux cleaned = 0.000253473 Jy ! Component: 150 - total flux cleaned = 0.000291057 Jy ! Component: 200 - total flux cleaned = 0.000307005 Jy ! Total flux subtracted in 200 components = 0.000307005 Jy ! Clean residual min=-0.001712 max=0.001651 Jy/beam ! Clean residual mean=-0.000003 rms=0.000396 Jy/beam ! Combined flux in latest and established models = 0.0681122 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 48 components and 0.0681122 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076044Jy sigma=0.000664 ! Fit after self-cal, rms=0.076073Jy sigma=0.000664 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.00726e-05 Jy ! Component: 100 - total flux cleaned = 9.62957e-06 Jy ! Component: 150 - total flux cleaned = 3.22016e-05 Jy ! Component: 200 - total flux cleaned = 5.21577e-05 Jy ! Total flux subtracted in 200 components = 5.21577e-05 Jy ! Clean residual min=-0.001708 max=0.001622 Jy/beam ! Clean residual mean=-0.000003 rms=0.000395 Jy/beam ! Combined flux in latest and established models = 0.0681644 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 49 components and 0.0681644 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076071Jy sigma=0.000664 ! Fit after self-cal, rms=0.076071Jy sigma=0.000664 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076071Jy sigma=0.000664 ! Fit after self-cal, rms=0.076198Jy sigma=0.000664 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.024 mas, bmaj=4.479 mas, bpa=34.79 degrees ! Estimated noise=650.705 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000173358 Jy ! Component: 100 - total flux cleaned = 0.000199627 Jy ! Component: 150 - total flux cleaned = 0.000222205 Jy ! Component: 200 - total flux cleaned = 0.000235925 Jy ! Total flux subtracted in 200 components = 0.000235925 Jy ! Clean residual min=-0.001697 max=0.001603 Jy/beam ! Clean residual mean=-0.000003 rms=0.000393 Jy/beam ! Combined flux in latest and established models = 0.0684003 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 50 components and 0.0684003 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076196Jy sigma=0.000664 ! Fit after self-cal, rms=0.076200Jy sigma=0.000664 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.01522e-07 Jy ! Component: 100 - total flux cleaned = 1.50333e-05 Jy ! Component: 150 - total flux cleaned = 2.70631e-05 Jy ! Component: 200 - total flux cleaned = 3.80089e-05 Jy ! Total flux subtracted in 200 components = 3.80089e-05 Jy ! Clean residual min=-0.001687 max=0.001591 Jy/beam ! Clean residual mean=-0.000003 rms=0.000393 Jy/beam ! Combined flux in latest and established models = 0.0684383 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 52 components and 0.0684383 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076198Jy sigma=0.000664 ! Fit after self-cal, rms=0.076198Jy sigma=0.000664 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076198Jy sigma=0.000664 ! Fit after self-cal, rms=0.076195Jy sigma=0.000664 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.078 mas, bmaj=9.007 mas, bpa=56.32 degrees ! Estimated noise=820.709 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000564901 Jy ! Component: 100 - total flux cleaned = 0.000599246 Jy ! Component: 150 - total flux cleaned = 0.000617778 Jy ! Component: 200 - total flux cleaned = 0.000634091 Jy ! Total flux subtracted in 200 components = 0.000634091 Jy ! Clean residual min=-0.002088 max=0.001624 Jy/beam ! Clean residual mean=-0.000005 rms=0.000489 Jy/beam ! Combined flux in latest and established models = 0.0690724 Jy selfcal ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 54 components and 0.0690724 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076194Jy sigma=0.000664 ! Fit after self-cal, rms=0.076194Jy sigma=0.000664 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.84646e-05 Jy ! Component: 100 - total flux cleaned = 6.76969e-05 Jy ! Component: 150 - total flux cleaned = 8.3272e-05 Jy ! Component: 200 - total flux cleaned = 9.70162e-05 Jy ! Total flux subtracted in 200 components = 9.70162e-05 Jy ! Clean residual min=-0.002083 max=0.001622 Jy/beam ! Clean residual mean=-0.000005 rms=0.000487 Jy/beam ! Combined flux in latest and established models = 0.0691694 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 55 components and 0.0691694 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076194Jy sigma=0.000664 ! Fit after self-cal, rms=0.076193Jy sigma=0.000664 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.02 mas, bmaj=4.474 mas, bpa=35.39 degrees ! Estimated noise=650.853 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.02 x 4.474 at 35.39 degrees (North through East) ! Clean map min=-0.001582 max=0.060798 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.355 mas, bmaj=3.664 mas, bpa=36.89 degrees ! Estimated noise=1087.53 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0467613 Jy ! Component: 100 - total flux cleaned = 0.057647 Jy ! Component: 150 - total flux cleaned = 0.0621326 Jy ! Component: 200 - total flux cleaned = 0.0647814 Jy ! Total flux subtracted in 200 components = 0.0647814 Jy ! Clean residual min=-0.002729 max=0.003141 Jy/beam ! Clean residual mean=-0.000004 rms=0.000735 Jy/beam ! Combined flux in latest and established models = 0.0647813 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 0.0647813 Jy ! Inverting map and beam ! Estimated beam: bmin=4.02 mas, bmaj=4.474 mas, bpa=35.39 degrees ! Estimated noise=650.853 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00218172 Jy ! Component: 100 - total flux cleaned = 0.00298438 Jy ! Component: 150 - total flux cleaned = 0.00319488 Jy ! Component: 200 - total flux cleaned = 0.00336172 Jy ! Total flux subtracted in 200 components = 0.00336172 Jy ! Clean residual min=-0.001775 max=0.001552 Jy/beam ! Clean residual mean=-0.000004 rms=0.000397 Jy/beam ! Combined flux in latest and established models = 0.068143 Jy ! Adding 20 model components to the UV plane model. ! The established model now contains 41 components and 0.0681431 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.078 mas, bmaj=9.007 mas, bpa=56.32 degrees ! Estimated noise=820.709 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000823934 Jy ! Component: 100 - total flux cleaned = 0.000879032 Jy ! Component: 150 - total flux cleaned = 0.000917959 Jy ! Component: 200 - total flux cleaned = 0.000937341 Jy ! Total flux subtracted in 200 components = 0.000937341 Jy ! Clean residual min=-0.002118 max=0.001637 Jy/beam ! Clean residual mean=-0.000005 rms=0.000489 Jy/beam ! Combined flux in latest and established models = 0.0690804 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.6683e-05 Jy ! Component: 100 - total flux cleaned = 3.24857e-05 Jy ! Component: 150 - total flux cleaned = 4.75236e-05 Jy ! Component: 200 - total flux cleaned = 6.18875e-05 Jy ! Total flux subtracted in 200 components = 6.18875e-05 Jy ! Clean residual min=-0.002108 max=0.001629 Jy/beam ! Clean residual mean=-0.000005 rms=0.000488 Jy/beam ! Combined flux in latest and established models = 0.0691423 Jy ! Adding 5 model components to the UV plane model. ! The established model now contains 43 components and 0.0691423 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.02 mas, bmaj=4.474 mas, bpa=35.39 degrees ! Estimated noise=650.853 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000215563 Jy ! Component: 100 - total flux cleaned = -0.000285043 Jy ! Component: 150 - total flux cleaned = -0.000284968 Jy ! Component: 200 - total flux cleaned = -0.000283884 Jy ! Total flux subtracted in 200 components = -0.000283884 Jy ! Clean residual min=-0.001684 max=0.001546 Jy/beam ! Clean residual mean=-0.000003 rms=0.000393 Jy/beam ! Combined flux in latest and established models = 0.0688584 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 51 components and 0.0688584 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076197Jy sigma=0.000664 ! Fit after self-cal, rms=0.076194Jy sigma=0.000664 wmodel J0541+6745_S_2017_07_09_pus_map.mod ! Writing 51 model components to file: J0541+6745_S_2017_07_09_pus_map.mod wobs J0541+6745_S_2017_07_09_pus_uvs.fits ! Writing UV FITS file: J0541+6745_S_2017_07_09_pus_uvs.fits wwins J0541+6745_S_2017_07_09_pus_map.win ! wwins: Wrote 1 windows to J0541+6745_S_2017_07_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000497873 Jy ! Component: 100 - total flux cleaned = -0.000751068 Jy ! Component: 150 - total flux cleaned = -0.00104342 Jy ! Component: 200 - total flux cleaned = -0.00114479 Jy ! Component: 250 - total flux cleaned = -0.00116852 Jy ! Component: 300 - total flux cleaned = -0.0011442 Jy ! Component: 350 - total flux cleaned = -0.00112043 Jy ! Component: 400 - total flux cleaned = -0.00114176 Jy ! Component: 450 - total flux cleaned = -0.00111998 Jy ! Component: 500 - total flux cleaned = -0.00116294 Jy ! Component: 550 - total flux cleaned = -0.00122622 Jy ! Component: 600 - total flux cleaned = -0.00122646 Jy ! Component: 650 - total flux cleaned = -0.00134847 Jy ! Component: 700 - total flux cleaned = -0.00136858 Jy ! Component: 750 - total flux cleaned = -0.00142787 Jy ! Component: 800 - total flux cleaned = -0.00144737 Jy ! Component: 850 - total flux cleaned = -0.00150478 Jy ! Component: 900 - total flux cleaned = -0.00156154 Jy ! Component: 950 - total flux cleaned = -0.00165431 Jy ! Component: 1000 - total flux cleaned = -0.00165425 Jy ! Component: 1050 - total flux cleaned = -0.00169087 Jy ! Component: 1100 - total flux cleaned = -0.00169119 Jy ! Component: 1150 - total flux cleaned = -0.00172673 Jy ! Component: 1200 - total flux cleaned = -0.00165653 Jy ! Component: 1250 - total flux cleaned = -0.00169099 Jy ! Component: 1300 - total flux cleaned = -0.00162222 Jy ! Component: 1350 - total flux cleaned = -0.001605 Jy ! Component: 1400 - total flux cleaned = -0.00160499 Jy ! Component: 1450 - total flux cleaned = -0.00155508 Jy ! Component: 1500 - total flux cleaned = -0.00157138 Jy ! Component: 1550 - total flux cleaned = -0.00145693 Jy ! Component: 1600 - total flux cleaned = -0.00142471 Jy ! Component: 1650 - total flux cleaned = -0.0013928 Jy ! Component: 1700 - total flux cleaned = -0.00132923 Jy ! Component: 1750 - total flux cleaned = -0.00131357 Jy ! Component: 1800 - total flux cleaned = -0.00134442 Jy ! Component: 1850 - total flux cleaned = -0.00123614 Jy ! Component: 1900 - total flux cleaned = -0.0012208 Jy ! Component: 1950 - total flux cleaned = -0.00119019 Jy ! Component: 2000 - total flux cleaned = -0.00114497 Jy ! Component: 2050 - total flux cleaned = -0.0011599 Jy ! Component: 2100 - total flux cleaned = -0.00111517 Jy ! Component: 2150 - total flux cleaned = -0.0011006 Jy ! Component: 2200 - total flux cleaned = -0.0010715 Jy ! Component: 2250 - total flux cleaned = -0.00102799 Jy ! Component: 2300 - total flux cleaned = -0.00097047 Jy ! Component: 2350 - total flux cleaned = -0.000984948 Jy ! Component: 2400 - total flux cleaned = -0.000871393 Jy ! Component: 2450 - total flux cleaned = -0.000913844 Jy ! Component: 2500 - total flux cleaned = -0.000857855 Jy ! Component: 2550 - total flux cleaned = -0.000844022 Jy ! Component: 2600 - total flux cleaned = -0.000830267 Jy ! Component: 2650 - total flux cleaned = -0.00081647 Jy ! Component: 2700 - total flux cleaned = -0.000802847 Jy ! Component: 2750 - total flux cleaned = -0.000789178 Jy ! Component: 2800 - total flux cleaned = -0.000762495 Jy ! Component: 2850 - total flux cleaned = -0.000722389 Jy ! Component: 2900 - total flux cleaned = -0.000722335 Jy ! Component: 2950 - total flux cleaned = -0.000695964 Jy ! Component: 3000 - total flux cleaned = -0.000656564 Jy ! Component: 3050 - total flux cleaned = -0.000656582 Jy ! Component: 3100 - total flux cleaned = -0.000592022 Jy ! Component: 3150 - total flux cleaned = -0.000579105 Jy ! Component: 3200 - total flux cleaned = -0.000553672 Jy ! Component: 3250 - total flux cleaned = -0.000503026 Jy ! Component: 3300 - total flux cleaned = -0.000515515 Jy ! Component: 3350 - total flux cleaned = -0.000490561 Jy ! Component: 3400 - total flux cleaned = -0.000465793 Jy ! Component: 3450 - total flux cleaned = -0.000379231 Jy ! Component: 3500 - total flux cleaned = -0.000367036 Jy ! Component: 3550 - total flux cleaned = -0.000318263 Jy ! Component: 3600 - total flux cleaned = -0.000294034 Jy ! Component: 3650 - total flux cleaned = -0.000306197 Jy ! Component: 3700 - total flux cleaned = -0.000258294 Jy ! Component: 3750 - total flux cleaned = -0.000210518 Jy ! Component: 3800 - total flux cleaned = -0.000234199 Jy ! Component: 3850 - total flux cleaned = -0.000151554 Jy ! Component: 3900 - total flux cleaned = -0.000139865 Jy ! Component: 3950 - total flux cleaned = -3.47238e-05 Jy ! Component: 4000 - total flux cleaned = -1.14829e-05 Jy ! Component: 4050 - total flux cleaned = 3.48322e-05 Jy ! Total flux subtracted in 4096 components = 8.0865e-05 Jy ! Clean residual min=-0.000747 max=0.000823 Jy/beam ! Clean residual mean=-0.000001 rms=0.000207 Jy/beam ! Combined flux in latest and established models = 0.0689393 Jy keep ! Adding 321 model components to the UV plane model. ! The established model now contains 372 components and 0.0689393 Jy ![Exited script file: muppet] wmap "J0541+6745_S_2017_07_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.02 x 4.474 at 35.39 degrees (North through East) ! Clean map min=-0.0011496 max=0.060847 Jy/beam ! Writing clean map to FITS file: J0541+6745_S_2017_07_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0608471 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000206162 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.01646 1.01646 2.03292 4.06583 8.13167 16.2633 32.5267 65.0533 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.06 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.02 x 4.474 at 35.39 degrees (North through East) ! Clean map min=-0.0011496 max=0.060847 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0541+6745_S_2017_07_09_pus_uvs.log closed on Wed May 8 14:43:13 2019