! Started logfile: J0541+3301_S_2017_03_23_pus_uvs.log on Mon May 13 09:50:04 2019 obs J0541+3301_S_2017_03_23_pus_uva.fits ! Reading UV FITS file: J0541+3301_S_2017_03_23_pus_uva.fits ! AN table 1: 113 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.900295 visibilities/baseline/integration-bin. ! Found source: J0541+3301 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 481 lines of history. ! ! Reading 18312 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0541+3301_S_2017_03_23_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 60 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 60 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 60 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 410 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.960777Jy sigma=0.008755 ! Fit after self-cal, rms=0.943415Jy sigma=0.008619 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.907 mas, bmaj=5.298 mas, bpa=-3.673 degrees ! Estimated noise=1053.79 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0458525 Jy ! Component: 100 - total flux cleaned = 0.0558516 Jy ! Total flux subtracted in 100 components = 0.0558516 Jy ! Clean residual min=-0.003627 max=0.003703 Jy/beam ! Clean residual mean=-0.000002 rms=0.000832 Jy/beam ! Combined flux in latest and established models = 0.0558516 Jy ! Performing phase self-cal ! Adding 2 model components to the UV plane model. ! The established model now contains 2 components and 0.0558516 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079108Jy sigma=0.000659 ! Fit after self-cal, rms=0.078962Jy sigma=0.000658 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.529 mas, bmaj=6.249 mas, bpa=-2.461 degrees ! Estimated noise=630.962 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00272386 Jy ! Component: 100 - total flux cleaned = 0.00386657 Jy ! Component: 150 - total flux cleaned = 0.00454416 Jy ! Component: 200 - total flux cleaned = 0.00490729 Jy ! Total flux subtracted in 200 components = 0.00490729 Jy ! Clean residual min=-0.002179 max=0.001909 Jy/beam ! Clean residual mean=-0.000005 rms=0.000497 Jy/beam ! Combined flux in latest and established models = 0.0607589 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 22 components and 0.0607589 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078833Jy sigma=0.000657 ! Fit after self-cal, rms=0.078830Jy sigma=0.000657 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 0.99 HN 0.98 KP 1.04 ! LA 1.02 MK 0.97 NL 0.86 OV 1.05 ! PT 1.05 SC 0.93 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.07 HN 1.06 KP 0.98 ! LA 0.95 MK 1.00 NL 1.00 OV 1.07 ! PT 0.96 SC 0.96 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 1.01 HN 1.00 KP 0.87 ! LA 0.76 MK 1.10 NL 1.25 OV 0.95 ! PT 1.02 SC 1.03 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.04 HN 0.96 KP 1.00* ! LA 0.82 MK 1.11 NL 1.00* OV 1.57 ! PT 1.02 SC 1.00* ! ! ! Fit before self-cal, rms=0.078830Jy sigma=0.000657 ! Fit after self-cal, rms=0.078731Jy sigma=0.000654 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.544 mas, bmaj=6.253 mas, bpa=-1.769 degrees ! Estimated noise=632.084 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.64567e-05 Jy ! Component: 100 - total flux cleaned = 4.17987e-05 Jy ! Component: 150 - total flux cleaned = 4.21212e-05 Jy ! Component: 200 - total flux cleaned = 4.21561e-05 Jy ! Total flux subtracted in 200 components = 4.21561e-05 Jy ! Clean residual min=-0.001696 max=0.001613 Jy/beam ! Clean residual mean=-0.000003 rms=0.000426 Jy/beam ! Combined flux in latest and established models = 0.0608011 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 27 components and 0.0608011 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078727Jy sigma=0.000654 ! Fit after self-cal, rms=0.078772Jy sigma=0.000653 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078772Jy sigma=0.000653 ! Fit after self-cal, rms=0.079092Jy sigma=0.000651 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.541 mas, bmaj=6.274 mas, bpa=-1.614 degrees ! Estimated noise=630.889 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.23445e-05 Jy ! Component: 100 - total flux cleaned = -0.000115168 Jy ! Component: 150 - total flux cleaned = -0.000151456 Jy ! Component: 200 - total flux cleaned = -0.000167274 Jy ! Total flux subtracted in 200 components = -0.000167274 Jy ! Clean residual min=-0.001489 max=0.001476 Jy/beam ! Clean residual mean=-0.000003 rms=0.000379 Jy/beam ! Combined flux in latest and established models = 0.0606338 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 33 components and 0.0606338 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079089Jy sigma=0.000651 ! Fit after self-cal, rms=0.079135Jy sigma=0.000651 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.90441e-06 Jy ! Component: 100 - total flux cleaned = -1.78886e-06 Jy ! Component: 150 - total flux cleaned = -8.51937e-06 Jy ! Component: 200 - total flux cleaned = -1.50304e-05 Jy ! Total flux subtracted in 200 components = -1.50304e-05 Jy ! Clean residual min=-0.001553 max=0.001496 Jy/beam ! Clean residual mean=-0.000003 rms=0.000382 Jy/beam ! Combined flux in latest and established models = 0.0606188 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 36 components and 0.0606188 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079134Jy sigma=0.000651 ! Fit after self-cal, rms=0.079133Jy sigma=0.000651 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079133Jy sigma=0.000651 ! Fit after self-cal, rms=0.079472Jy sigma=0.000651 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.544 mas, bmaj=6.287 mas, bpa=-1.36 degrees ! Estimated noise=630.021 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000177328 Jy ! Component: 100 - total flux cleaned = -0.000211664 Jy ! Component: 150 - total flux cleaned = -0.0002338 Jy ! Component: 200 - total flux cleaned = -0.00024054 Jy ! Total flux subtracted in 200 components = -0.00024054 Jy ! Clean residual min=-0.001511 max=0.001492 Jy/beam ! Clean residual mean=-0.000003 rms=0.000379 Jy/beam ! Combined flux in latest and established models = 0.0603783 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 37 components and 0.0603783 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079469Jy sigma=0.000651 ! Fit after self-cal, rms=0.079475Jy sigma=0.000651 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.40828e-06 Jy ! Component: 100 - total flux cleaned = -1.41855e-06 Jy ! Component: 150 - total flux cleaned = -7.22065e-06 Jy ! Component: 200 - total flux cleaned = -7.25864e-06 Jy ! Total flux subtracted in 200 components = -7.25864e-06 Jy ! Clean residual min=-0.001523 max=0.001503 Jy/beam ! Clean residual mean=-0.000003 rms=0.000379 Jy/beam ! Combined flux in latest and established models = 0.060371 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 39 components and 0.060371 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079474Jy sigma=0.000651 ! Fit after self-cal, rms=0.079474Jy sigma=0.000651 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079474Jy sigma=0.000651 ! Fit after self-cal, rms=0.079483Jy sigma=0.000651 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.311 mas, bmaj=9.561 mas, bpa=0.6519 degrees ! Estimated noise=781.355 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000144475 Jy ! Component: 100 - total flux cleaned = -0.000179213 Jy ! Component: 150 - total flux cleaned = -0.00020486 Jy ! Component: 200 - total flux cleaned = -0.000215115 Jy ! Total flux subtracted in 200 components = -0.000215115 Jy ! Clean residual min=-0.001952 max=0.001620 Jy/beam ! Clean residual mean=-0.000008 rms=0.000472 Jy/beam ! Combined flux in latest and established models = 0.0601559 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 43 components and 0.0601559 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079484Jy sigma=0.000651 ! Fit after self-cal, rms=0.079483Jy sigma=0.000651 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.26028e-05 Jy ! Component: 100 - total flux cleaned = 7.20017e-07 Jy ! Component: 150 - total flux cleaned = -8.46114e-06 Jy ! Component: 200 - total flux cleaned = -8.23366e-06 Jy ! Total flux subtracted in 200 components = -8.23366e-06 Jy ! Clean residual min=-0.001944 max=0.001615 Jy/beam ! Clean residual mean=-0.000008 rms=0.000472 Jy/beam ! Combined flux in latest and established models = 0.0601477 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 46 components and 0.0601477 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079484Jy sigma=0.000651 ! Fit after self-cal, rms=0.079482Jy sigma=0.000651 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.549 mas, bmaj=6.298 mas, bpa=-1.157 degrees ! Estimated noise=629.322 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.549 x 6.298 at -1.157 degrees (North through East) ! Clean map min=-0.0014684 max=0.058738 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.921 mas, bmaj=5.341 mas, bpa=-2.566 degrees ! Estimated noise=1061.19 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0463184 Jy ! Component: 100 - total flux cleaned = 0.0564195 Jy ! Component: 150 - total flux cleaned = 0.0576822 Jy ! Component: 200 - total flux cleaned = 0.0580063 Jy ! Total flux subtracted in 200 components = 0.0580063 Jy ! Clean residual min=-0.003125 max=0.003077 Jy/beam ! Clean residual mean=-0.000001 rms=0.000721 Jy/beam ! Combined flux in latest and established models = 0.0580062 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.0580062 Jy ! Inverting map and beam ! Estimated beam: bmin=3.549 mas, bmaj=6.298 mas, bpa=-1.157 degrees ! Estimated noise=629.322 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00132456 Jy ! Component: 100 - total flux cleaned = 0.00198492 Jy ! Component: 150 - total flux cleaned = 0.00211202 Jy ! Component: 200 - total flux cleaned = 0.00214986 Jy ! Total flux subtracted in 200 components = 0.00214986 Jy ! Clean residual min=-0.001469 max=0.001569 Jy/beam ! Clean residual mean=-0.000003 rms=0.000381 Jy/beam ! Combined flux in latest and established models = 0.0601561 Jy ! Adding 13 model components to the UV plane model. ! The established model now contains 21 components and 0.0601561 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.311 mas, bmaj=9.561 mas, bpa=0.6519 degrees ! Estimated noise=781.355 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.60497e-05 Jy ! Component: 100 - total flux cleaned = 2.07507e-05 Jy ! Component: 150 - total flux cleaned = 1.5011e-05 Jy ! Component: 200 - total flux cleaned = 1.48041e-05 Jy ! Total flux subtracted in 200 components = 1.48041e-05 Jy ! Clean residual min=-0.001936 max=0.001621 Jy/beam ! Clean residual mean=-0.000008 rms=0.000473 Jy/beam ! Combined flux in latest and established models = 0.0601709 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.55293e-06 Jy ! Component: 100 - total flux cleaned = -5.33633e-06 Jy ! Component: 150 - total flux cleaned = -5.08449e-06 Jy ! Component: 200 - total flux cleaned = -5.04142e-06 Jy ! Total flux subtracted in 200 components = -5.04142e-06 Jy ! Clean residual min=-0.001935 max=0.001617 Jy/beam ! Clean residual mean=-0.000008 rms=0.000473 Jy/beam ! Combined flux in latest and established models = 0.0601659 Jy ! Adding 8 model components to the UV plane model. ! The established model now contains 29 components and 0.0601659 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.549 mas, bmaj=6.298 mas, bpa=-1.157 degrees ! Estimated noise=629.322 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000149042 Jy ! Component: 100 - total flux cleaned = -9.21881e-05 Jy ! Component: 150 - total flux cleaned = -9.22332e-05 Jy ! Component: 200 - total flux cleaned = -9.23323e-05 Jy ! Total flux subtracted in 200 components = -9.23323e-05 Jy ! Clean residual min=-0.001486 max=0.001547 Jy/beam ! Clean residual mean=-0.000003 rms=0.000379 Jy/beam ! Combined flux in latest and established models = 0.0600735 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 38 components and 0.0600735 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079486Jy sigma=0.000651 ! Fit after self-cal, rms=0.079484Jy sigma=0.000651 wmodel J0541+3301_S_2017_03_23_pus_map.mod ! Writing 38 model components to file: J0541+3301_S_2017_03_23_pus_map.mod wobs J0541+3301_S_2017_03_23_pus_uvs.fits ! Writing UV FITS file: J0541+3301_S_2017_03_23_pus_uvs.fits wwins J0541+3301_S_2017_03_23_pus_map.win ! wwins: Wrote 1 windows to J0541+3301_S_2017_03_23_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.0003383 Jy ! Component: 100 - total flux cleaned = 0.000365584 Jy ! Component: 150 - total flux cleaned = 0.000168442 Jy ! Component: 200 - total flux cleaned = -2.20974e-05 Jy ! Component: 250 - total flux cleaned = -0.000229146 Jy ! Component: 300 - total flux cleaned = -0.000430667 Jy ! Component: 350 - total flux cleaned = -0.000540057 Jy ! Component: 400 - total flux cleaned = -0.000561811 Jy ! Component: 450 - total flux cleaned = -0.000645699 Jy ! Component: 500 - total flux cleaned = -0.000645708 Jy ! Component: 550 - total flux cleaned = -0.000685946 Jy ! Component: 600 - total flux cleaned = -0.000646384 Jy ! Component: 650 - total flux cleaned = -0.000588212 Jy ! Component: 700 - total flux cleaned = -0.000704253 Jy ! Component: 750 - total flux cleaned = -0.000685351 Jy ! Component: 800 - total flux cleaned = -0.000760617 Jy ! Component: 850 - total flux cleaned = -0.000853293 Jy ! Component: 900 - total flux cleaned = -0.000908046 Jy ! Component: 950 - total flux cleaned = -0.000926125 Jy ! Component: 1000 - total flux cleaned = -0.000961909 Jy ! Component: 1050 - total flux cleaned = -0.00103203 Jy ! Component: 1100 - total flux cleaned = -0.00104943 Jy ! Component: 1150 - total flux cleaned = -0.00106684 Jy ! Component: 1200 - total flux cleaned = -0.0011519 Jy ! Component: 1250 - total flux cleaned = -0.00123606 Jy ! Component: 1300 - total flux cleaned = -0.00120301 Jy ! Component: 1350 - total flux cleaned = -0.00131833 Jy ! Component: 1400 - total flux cleaned = -0.00130207 Jy ! Component: 1450 - total flux cleaned = -0.00136641 Jy ! Component: 1500 - total flux cleaned = -0.00141427 Jy ! Component: 1550 - total flux cleaned = -0.00147765 Jy ! Component: 1600 - total flux cleaned = -0.00154031 Jy ! Component: 1650 - total flux cleaned = -0.00161811 Jy ! Component: 1700 - total flux cleaned = -0.00171024 Jy ! Component: 1750 - total flux cleaned = -0.00175599 Jy ! Component: 1800 - total flux cleaned = -0.00178624 Jy ! Component: 1850 - total flux cleaned = -0.00183135 Jy ! Component: 1900 - total flux cleaned = -0.00195036 Jy ! Component: 1950 - total flux cleaned = -0.00197982 Jy ! Component: 2000 - total flux cleaned = -0.00200921 Jy ! Component: 2050 - total flux cleaned = -0.00211091 Jy ! Component: 2100 - total flux cleaned = -0.00221148 Jy ! Component: 2150 - total flux cleaned = -0.00228271 Jy ! Component: 2200 - total flux cleaned = -0.00235361 Jy ! Component: 2250 - total flux cleaned = -0.00245192 Jy ! Component: 2300 - total flux cleaned = -0.00249384 Jy ! Component: 2350 - total flux cleaned = -0.00253523 Jy ! Component: 2400 - total flux cleaned = -0.00263155 Jy ! Component: 2450 - total flux cleaned = -0.00267257 Jy ! Component: 2500 - total flux cleaned = -0.00274055 Jy ! Component: 2550 - total flux cleaned = -0.00275394 Jy ! Component: 2600 - total flux cleaned = -0.00284774 Jy ! Component: 2650 - total flux cleaned = -0.00294077 Jy ! Component: 2700 - total flux cleaned = -0.00296737 Jy ! Component: 2750 - total flux cleaned = -0.00307245 Jy ! Component: 2800 - total flux cleaned = -0.00307252 Jy ! Component: 2850 - total flux cleaned = -0.00313739 Jy ! Component: 2900 - total flux cleaned = -0.00325347 Jy ! Component: 2950 - total flux cleaned = -0.00327907 Jy ! Component: 3000 - total flux cleaned = -0.00336807 Jy ! Component: 3050 - total flux cleaned = -0.00334276 Jy ! Component: 3100 - total flux cleaned = -0.0034182 Jy ! Component: 3150 - total flux cleaned = -0.00349312 Jy ! Component: 3200 - total flux cleaned = -0.00356751 Jy ! Component: 3250 - total flux cleaned = -0.00361689 Jy ! Component: 3300 - total flux cleaned = -0.00360461 Jy ! Component: 3350 - total flux cleaned = -0.00371438 Jy ! Component: 3400 - total flux cleaned = -0.0037265 Jy ! Component: 3450 - total flux cleaned = -0.00377471 Jy ! Component: 3500 - total flux cleaned = -0.00387055 Jy ! Component: 3550 - total flux cleaned = -0.00395399 Jy ! Component: 3600 - total flux cleaned = -0.00400153 Jy ! Component: 3650 - total flux cleaned = -0.0040251 Jy ! Component: 3700 - total flux cleaned = -0.00407195 Jy ! Component: 3750 - total flux cleaned = -0.00415358 Jy ! Component: 3800 - total flux cleaned = -0.00416513 Jy ! Component: 3850 - total flux cleaned = -0.00423425 Jy ! Component: 3900 - total flux cleaned = -0.00429155 Jy ! Component: 3950 - total flux cleaned = -0.00433724 Jy ! Component: 4000 - total flux cleaned = -0.00439398 Jy ! Component: 4050 - total flux cleaned = -0.00446158 Jy ! Total flux subtracted in 4096 components = -0.00450653 Jy ! Clean residual min=-0.000722 max=0.000723 Jy/beam ! Clean residual mean=-0.000002 rms=0.000212 Jy/beam ! Combined flux in latest and established models = 0.055567 Jy keep ! Adding 325 model components to the UV plane model. ! The established model now contains 363 components and 0.055567 Jy ![Exited script file: muppet] wmap "J0541+3301_S_2017_03_23_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.549 x 6.298 at -1.157 degrees (North through East) ! Clean map min=-0.0011219 max=0.05889 Jy/beam ! Writing clean map to FITS file: J0541+3301_S_2017_03_23_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0588897 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000209746 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.06851 1.06851 2.13701 4.27402 8.54805 17.0961 34.1922 68.3844 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.058 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.549 x 6.298 at -1.157 degrees (North through East) ! Clean map min=-0.0011219 max=0.05889 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0541+3301_S_2017_03_23_pus_uvs.log closed on Mon May 13 09:50:10 2019