! Started logfile: J0539-2839_S_2017_08_05_pus_uvs.log on Thu May 9 19:22:05 2019 obs J0539-2839_S_2017_08_05_pus_uva.fits ! Reading UV FITS file: J0539-2839_S_2017_08_05_pus_uva.fits ! AN table 1: 42 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.236508 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0539-2839 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 513 lines of history. ! ! Reading 1788 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0539-2839_S_2017_08_05_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 321 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 321 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 321 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 387 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.399714Jy sigma=0.002758 ! Fit after self-cal, rms=0.271378Jy sigma=0.001834 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.436 mas, bmaj=7.176 mas, bpa=1.667 degrees ! Estimated noise=3684.23 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.681669 Jy ! Component: 100 - total flux cleaned = 0.844122 Jy ! Total flux subtracted in 100 components = 0.844122 Jy ! Clean residual min=-0.054685 max=0.104488 Jy/beam ! Clean residual mean=-0.000926 rms=0.021565 Jy/beam ! Combined flux in latest and established models = 0.844122 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.844122 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.287673Jy sigma=0.001946 ! Fit after self-cal, rms=0.287660Jy sigma=0.001945 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.867 mas, bmaj=7.733 mas, bpa=2.029 degrees ! Estimated noise=3061.59 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.1187 Jy ! Component: 100 - total flux cleaned = 0.172406 Jy ! Component: 150 - total flux cleaned = 0.200055 Jy ! Component: 200 - total flux cleaned = 0.212931 Jy ! Total flux subtracted in 200 components = 0.212931 Jy ! Clean residual min=-0.045303 max=0.074360 Jy/beam ! Clean residual mean=-0.000942 rms=0.016237 Jy/beam ! Combined flux in latest and established models = 1.05705 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 29 components and 1.05705 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.236681Jy sigma=0.001567 ! Fit after self-cal, rms=0.236404Jy sigma=0.001565 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 2.35 FD 0.92 HN 1.00* KP 1.01 ! LA 0.96 MK 1.00 NL 1.00* OV 0.99 ! PT 0.97 SC 0.96 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.98 HN 1.00* KP 0.97 ! LA 0.94 MK 1.00 NL 1.11 OV 1.02 ! PT 0.95 SC 1.03 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00 HN 1.00* KP 0.86 ! LA 0.73 MK 1.04 NL 1.26 OV 0.94 ! PT 0.95 SC 1.02 ! ! ! Correcting IF 4. ! A total of 33 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.236404Jy sigma=0.001565 ! Fit after self-cal, rms=0.122044Jy sigma=0.000700 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.898 mas, bmaj=7.851 mas, bpa=3.225 degrees ! Estimated noise=3153.77 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (8.5, -0.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0104477 Jy ! Component: 100 - total flux cleaned = 0.00886244 Jy ! Component: 150 - total flux cleaned = 0.00887061 Jy ! Component: 200 - total flux cleaned = 0.00887937 Jy ! Total flux subtracted in 200 components = 0.00887937 Jy ! Clean residual min=-0.010922 max=0.012946 Jy/beam ! Clean residual mean=0.000014 rms=0.002817 Jy/beam ! Combined flux in latest and established models = 1.06593 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 45 components and 1.06593 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118481Jy sigma=0.000677 ! Fit after self-cal, rms=0.118714Jy sigma=0.000675 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118714Jy sigma=0.000675 ! Fit after self-cal, rms=0.118622Jy sigma=0.000675 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.896 mas, bmaj=7.847 mas, bpa=3.2 degrees ! Estimated noise=3154.23 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00319228 Jy ! Component: 100 - total flux cleaned = 0.00186224 Jy ! Component: 150 - total flux cleaned = 0.00126596 Jy ! Component: 200 - total flux cleaned = 0.000899178 Jy ! Total flux subtracted in 200 components = 0.000899178 Jy ! Clean residual min=-0.009338 max=0.011623 Jy/beam ! Clean residual mean=-0.000012 rms=0.002479 Jy/beam ! Combined flux in latest and established models = 1.06683 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 48 components and 1.06683 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117508Jy sigma=0.000669 ! Fit after self-cal, rms=0.117479Jy sigma=0.000668 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (3.5, 61). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00675577 Jy ! Component: 100 - total flux cleaned = 0.00786395 Jy ! Component: 150 - total flux cleaned = 0.0080516 Jy ! Component: 200 - total flux cleaned = 0.00777492 Jy ! Total flux subtracted in 200 components = 0.00777492 Jy ! Clean residual min=-0.008570 max=0.008046 Jy/beam ! Clean residual mean=0.000016 rms=0.002065 Jy/beam ! Combined flux in latest and established models = 1.07461 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 63 components and 1.07461 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116384Jy sigma=0.000661 ! Fit after self-cal, rms=0.116379Jy sigma=0.000661 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116379Jy sigma=0.000661 ! Fit after self-cal, rms=0.116320Jy sigma=0.000660 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.894 mas, bmaj=7.842 mas, bpa=3.229 degrees ! Estimated noise=3150.99 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0016217 Jy ! Component: 100 - total flux cleaned = 0.00126184 Jy ! Component: 150 - total flux cleaned = 0.000826339 Jy ! Component: 200 - total flux cleaned = 0.000623743 Jy ! Total flux subtracted in 200 components = 0.000623743 Jy ! Clean residual min=-0.008161 max=0.007808 Jy/beam ! Clean residual mean=0.000012 rms=0.001952 Jy/beam ! Combined flux in latest and established models = 1.07523 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 70 components and 1.07523 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115983Jy sigma=0.000659 ! Fit after self-cal, rms=0.115991Jy sigma=0.000659 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000751368 Jy ! Component: 100 - total flux cleaned = 0.000377167 Jy ! Component: 150 - total flux cleaned = 0.000118137 Jy ! Component: 200 - total flux cleaned = 0.00011634 Jy ! Total flux subtracted in 200 components = 0.00011634 Jy ! Clean residual min=-0.008011 max=0.007779 Jy/beam ! Clean residual mean=0.000012 rms=0.001907 Jy/beam ! Combined flux in latest and established models = 1.07535 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 78 components and 1.07535 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115773Jy sigma=0.000658 ! Fit after self-cal, rms=0.115780Jy sigma=0.000658 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115780Jy sigma=0.000658 ! Fit after self-cal, rms=0.115751Jy sigma=0.000658 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.114 mas, bmaj=25.38 mas, bpa=6.911 degrees ! Estimated noise=4093.12 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000849837 Jy ! Component: 100 - total flux cleaned = 0.000409371 Jy ! Component: 150 - total flux cleaned = 7.23123e-05 Jy ! Component: 200 - total flux cleaned = -0.00010445 Jy ! Total flux subtracted in 200 components = -0.00010445 Jy ! Clean residual min=-0.006592 max=0.008131 Jy/beam ! Clean residual mean=0.000041 rms=0.002367 Jy/beam ! Combined flux in latest and established models = 1.07524 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 89 components and 1.07524 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115725Jy sigma=0.000658 ! Fit after self-cal, rms=0.115729Jy sigma=0.000658 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.34331e-05 Jy ! Component: 100 - total flux cleaned = -0.000133083 Jy ! Component: 150 - total flux cleaned = -0.000134513 Jy ! Component: 200 - total flux cleaned = -0.000135162 Jy ! Total flux subtracted in 200 components = -0.000135162 Jy ! Clean residual min=-0.006493 max=0.008019 Jy/beam ! Clean residual mean=0.000042 rms=0.002349 Jy/beam ! Combined flux in latest and established models = 1.07511 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 94 components and 1.07511 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115694Jy sigma=0.000658 ! Fit after self-cal, rms=0.115699Jy sigma=0.000658 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.893 mas, bmaj=7.84 mas, bpa=3.256 degrees ! Estimated noise=3149.07 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.893 x 7.84 at 3.256 degrees (North through East) ! Clean map min=-0.0075276 max=0.90358 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115699Jy sigma=0.000658 ! Fit after self-cal, rms=0.104205Jy sigma=0.000593 ! Inverting map and beam ! Estimated beam: bmin=2.893 mas, bmaj=7.842 mas, bpa=3.237 degrees ! Estimated noise=3145.8 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000243934 Jy ! Component: 100 - total flux cleaned = -0.000493964 Jy ! Component: 150 - total flux cleaned = -0.000805259 Jy ! Component: 200 - total flux cleaned = -0.00094624 Jy ! Total flux subtracted in 200 components = -0.00094624 Jy ! Clean residual min=-0.007660 max=0.006903 Jy/beam ! Clean residual mean=0.000031 rms=0.001815 Jy/beam ! Combined flux in latest and established models = 1.07416 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 102 components and 1.07416 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104016Jy sigma=0.000592 ! Fit after self-cal, rms=0.104019Jy sigma=0.000592 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000266428 Jy ! Component: 100 - total flux cleaned = 0.000199838 Jy ! Component: 150 - total flux cleaned = 7.24043e-05 Jy ! Component: 200 - total flux cleaned = -0.000168995 Jy ! Total flux subtracted in 200 components = -0.000168995 Jy ! Clean residual min=-0.007539 max=0.007032 Jy/beam ! Clean residual mean=0.000030 rms=0.001797 Jy/beam ! Combined flux in latest and established models = 1.07399 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 108 components and 1.07399 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103888Jy sigma=0.000592 ! Fit after self-cal, rms=0.103894Jy sigma=0.000592 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103894Jy sigma=0.000592 ! Fit after self-cal, rms=0.103884Jy sigma=0.000592 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.415 mas, bmaj=7.144 mas, bpa=2.521 degrees ! Estimated noise=3959.1 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.724458 Jy ! Component: 100 - total flux cleaned = 0.904006 Jy ! Component: 150 - total flux cleaned = 0.978376 Jy ! Component: 200 - total flux cleaned = 1.01437 Jy ! Total flux subtracted in 200 components = 1.01437 Jy ! Clean residual min=-0.012605 max=0.017607 Jy/beam ! Clean residual mean=-0.000150 rms=0.003822 Jy/beam ! Combined flux in latest and established models = 1.01437 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 1.01437 Jy ! Inverting map and beam ! Estimated beam: bmin=2.893 mas, bmaj=7.842 mas, bpa=3.268 degrees ! Estimated noise=3144.79 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0216219 Jy ! Component: 100 - total flux cleaned = 0.0330718 Jy ! Component: 150 - total flux cleaned = 0.0408359 Jy ! Component: 200 - total flux cleaned = 0.0460627 Jy ! Total flux subtracted in 200 components = 0.0460627 Jy ! Clean residual min=-0.008399 max=0.007680 Jy/beam ! Clean residual mean=-0.000043 rms=0.002002 Jy/beam ! Combined flux in latest and established models = 1.06043 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 45 components and 1.06043 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.115 mas, bmaj=25.38 mas, bpa=6.911 degrees ! Estimated noise=4086.61 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00430585 Jy ! Component: 100 - total flux cleaned = 0.00645017 Jy ! Component: 150 - total flux cleaned = 0.00722594 Jy ! Component: 200 - total flux cleaned = 0.00783249 Jy ! Total flux subtracted in 200 components = 0.00783249 Jy ! Clean residual min=-0.007669 max=0.007292 Jy/beam ! Clean residual mean=-0.000003 rms=0.002477 Jy/beam ! Combined flux in latest and established models = 1.06827 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000340328 Jy ! Component: 100 - total flux cleaned = 0.000590216 Jy ! Component: 150 - total flux cleaned = 0.000767098 Jy ! Component: 200 - total flux cleaned = 0.000935087 Jy ! Total flux subtracted in 200 components = 0.000935087 Jy ! Clean residual min=-0.007366 max=0.007358 Jy/beam ! Clean residual mean=0.000009 rms=0.002423 Jy/beam ! Combined flux in latest and established models = 1.0692 Jy ! Adding 25 model components to the UV plane model. ! The established model now contains 67 components and 1.0692 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.893 mas, bmaj=7.842 mas, bpa=3.268 degrees ! Estimated noise=3144.79 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000483275 Jy ! Component: 100 - total flux cleaned = 0.00116965 Jy ! Component: 150 - total flux cleaned = 0.00129231 Jy ! Component: 200 - total flux cleaned = 0.00129555 Jy ! Total flux subtracted in 200 components = 0.00129555 Jy ! Clean residual min=-0.007149 max=0.006294 Jy/beam ! Clean residual mean=0.000011 rms=0.001805 Jy/beam ! Combined flux in latest and established models = 1.0705 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 88 components and 1.0705 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103800Jy sigma=0.000592 ! Fit after self-cal, rms=0.103767Jy sigma=0.000592 wmodel J0539-2839_S_2017_08_05_pus_map.mod ! Writing 88 model components to file: J0539-2839_S_2017_08_05_pus_map.mod wobs J0539-2839_S_2017_08_05_pus_uvs.fits ! Writing UV FITS file: J0539-2839_S_2017_08_05_pus_uvs.fits wwins J0539-2839_S_2017_08_05_pus_map.win ! wwins: Wrote 3 windows to J0539-2839_S_2017_08_05_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00130505 Jy ! Component: 100 - total flux cleaned = -0.00173247 Jy ! Component: 150 - total flux cleaned = -0.0018272 Jy ! Component: 200 - total flux cleaned = -0.00182482 Jy ! Component: 250 - total flux cleaned = -0.00173701 Jy ! Component: 300 - total flux cleaned = -0.00199728 Jy ! Component: 350 - total flux cleaned = -0.00224417 Jy ! Component: 400 - total flux cleaned = -0.00231888 Jy ! Component: 450 - total flux cleaned = -0.0021625 Jy ! Component: 500 - total flux cleaned = -0.00231016 Jy ! Component: 550 - total flux cleaned = -0.00252427 Jy ! Component: 600 - total flux cleaned = -0.00273255 Jy ! Component: 650 - total flux cleaned = -0.00300323 Jy ! Component: 700 - total flux cleaned = -0.00320044 Jy ! Component: 750 - total flux cleaned = -0.00339287 Jy ! Component: 800 - total flux cleaned = -0.00364472 Jy ! Component: 850 - total flux cleaned = -0.00370689 Jy ! Component: 900 - total flux cleaned = -0.00400992 Jy ! Component: 950 - total flux cleaned = -0.00418826 Jy ! Component: 1000 - total flux cleaned = -0.00442043 Jy ! Component: 1050 - total flux cleaned = -0.00470492 Jy ! Component: 1100 - total flux cleaned = -0.00492835 Jy ! Component: 1150 - total flux cleaned = -0.00531588 Jy ! Component: 1200 - total flux cleaned = -0.00575384 Jy ! Component: 1250 - total flux cleaned = -0.00618667 Jy ! Component: 1300 - total flux cleaned = -0.00650764 Jy ! Component: 1350 - total flux cleaned = -0.00682607 Jy ! Component: 1400 - total flux cleaned = -0.00708877 Jy ! Component: 1450 - total flux cleaned = -0.00745489 Jy ! Component: 1500 - total flux cleaned = -0.0077664 Jy ! Component: 1550 - total flux cleaned = -0.00812805 Jy ! Component: 1600 - total flux cleaned = -0.00848928 Jy ! Component: 1650 - total flux cleaned = -0.00895329 Jy ! Component: 1700 - total flux cleaned = -0.00921055 Jy ! Component: 1750 - total flux cleaned = -0.00951935 Jy ! Component: 1800 - total flux cleaned = -0.00972623 Jy ! Component: 1850 - total flux cleaned = -0.00983017 Jy ! Component: 1900 - total flux cleaned = -0.00998659 Jy ! Component: 1950 - total flux cleaned = -0.0101448 Jy ! Component: 2000 - total flux cleaned = -0.0102506 Jy ! Component: 2050 - total flux cleaned = -0.0103579 Jy ! Component: 2100 - total flux cleaned = -0.0104655 Jy ! Component: 2150 - total flux cleaned = -0.0106831 Jy ! Component: 2200 - total flux cleaned = -0.0107382 Jy ! Component: 2250 - total flux cleaned = -0.0107932 Jy ! Component: 2300 - total flux cleaned = -0.010961 Jy ! Component: 2350 - total flux cleaned = -0.0110177 Jy ! Component: 2400 - total flux cleaned = -0.0111889 Jy ! Component: 2450 - total flux cleaned = -0.0113627 Jy ! Component: 2500 - total flux cleaned = -0.0114796 Jy ! Component: 2550 - total flux cleaned = -0.0115384 Jy ! Component: 2600 - total flux cleaned = -0.0116578 Jy ! Component: 2650 - total flux cleaned = -0.0117785 Jy ! Component: 2700 - total flux cleaned = -0.0119014 Jy ! Component: 2750 - total flux cleaned = -0.0120868 Jy ! Component: 2800 - total flux cleaned = -0.0122121 Jy ! Component: 2850 - total flux cleaned = -0.0122752 Jy ! Component: 2900 - total flux cleaned = -0.0124676 Jy ! Component: 2950 - total flux cleaned = -0.0125983 Jy ! Component: 3000 - total flux cleaned = -0.0127307 Jy ! Component: 3050 - total flux cleaned = -0.0128644 Jy ! Component: 3100 - total flux cleaned = -0.0130682 Jy ! Component: 3150 - total flux cleaned = -0.0132055 Jy ! Component: 3200 - total flux cleaned = -0.0134145 Jy ! Component: 3250 - total flux cleaned = -0.0136269 Jy ! Component: 3300 - total flux cleaned = -0.0138427 Jy ! Component: 3350 - total flux cleaned = -0.0140616 Jy ! Component: 3400 - total flux cleaned = -0.0142834 Jy ! Component: 3450 - total flux cleaned = -0.0145838 Jy ! Component: 3500 - total flux cleaned = -0.0148891 Jy ! Component: 3550 - total flux cleaned = -0.0151989 Jy ! Component: 3600 - total flux cleaned = -0.0155131 Jy ! Component: 3650 - total flux cleaned = -0.0158319 Jy ! Component: 3700 - total flux cleaned = -0.0161564 Jy ! Component: 3750 - total flux cleaned = -0.0164037 Jy ! Component: 3800 - total flux cleaned = -0.0167393 Jy ! Component: 3850 - total flux cleaned = -0.0171657 Jy ! Component: 3900 - total flux cleaned = -0.0175116 Jy ! Component: 3950 - total flux cleaned = -0.0177759 Jy ! Component: 4000 - total flux cleaned = -0.0181332 Jy ! Component: 4050 - total flux cleaned = -0.0185872 Jy ! Total flux subtracted in 4096 components = -0.0189578 Jy ! Clean residual min=-0.004927 max=0.004777 Jy/beam ! Clean residual mean=-0.000121 rms=0.001581 Jy/beam ! Combined flux in latest and established models = 1.05154 Jy keep ! Adding 227 model components to the UV plane model. ! The established model now contains 315 components and 1.05154 Jy ![Exited script file: muppet] wmap "J0539-2839_S_2017_08_05_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.893 x 7.842 at 3.268 degrees (North through East) ! Clean map min=-0.010752 max=0.94238 Jy/beam ! Writing clean map to FITS file: J0539-2839_S_2017_08_05_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.942382 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00175564 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.558895 0.558895 1.11779 2.23558 4.47116 8.94232 17.8846 35.7693 71.5385 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0052 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.942 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.893 x 7.842 at 3.268 degrees (North through East) ! Clean map min=-0.010752 max=0.94238 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0539-2839_S_2017_08_05_pus_uvs.log closed on Thu May 9 19:22:11 2019