! Started logfile: J0539-2839_S_2017_05_27_pus_uvs.log on Fri May 3 10:57:51 2019 obs J0539-2839_S_2017_05_27_pus_uva.fits ! Reading UV FITS file: J0539-2839_S_2017_05_27_pus_uva.fits ! AN table 1: 20 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.813333 visibilities/baseline/integration-bin. ! Found source: J0539-2839 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1211 lines of history. ! ! Reading 2928 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0539-2839_S_2017_05_27_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 121 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.383669Jy sigma=0.052564 ! Fit after self-cal, rms=0.371115Jy sigma=0.051977 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.885 mas, bmaj=6.534 mas, bpa=-0.6296 degrees ! Estimated noise=1241.67 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.343536 Jy ! Component: 100 - total flux cleaned = 0.397644 Jy ! Total flux subtracted in 100 components = 0.397644 Jy ! Clean residual min=-0.177363 max=0.229216 Jy/beam ! Clean residual mean=0.001665 rms=0.055722 Jy/beam ! Combined flux in latest and established models = 0.397644 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.397644 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.818590Jy sigma=0.020455 ! Fit after self-cal, rms=0.818568Jy sigma=0.020455 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.678 mas, bmaj=8.226 mas, bpa=0.604 degrees ! Estimated noise=901.964 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0220496 Jy ! Component: 100 - total flux cleaned = 0.0273483 Jy ! Component: 150 - total flux cleaned = 0.0319307 Jy ! Component: 200 - total flux cleaned = 0.0348406 Jy ! Total flux subtracted in 200 components = 0.0348406 Jy ! Clean residual min=-0.164739 max=0.206421 Jy/beam ! Clean residual mean=0.004259 rms=0.055928 Jy/beam ! Combined flux in latest and established models = 0.432485 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 14 components and 0.432485 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.787022Jy sigma=0.021543 ! Fit after self-cal, rms=0.786894Jy sigma=0.021543 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 23.66 FD 0.51 HN 0.72 KP 0.56 ! LA 0.54 MK 0.74 NL 0.55 OV 0.57 ! PT 0.58 SC 0.59 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.79 FD 0.53 HN 0.77 KP 0.55 ! LA 0.52 MK 0.74 NL 0.66 OV 0.59 ! PT 0.56 SC 0.64 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.71 FD 0.55 HN 0.76 KP 0.55 ! LA 0.55 MK 0.76 NL 0.66 OV 0.53 ! PT 0.56 SC 0.65 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.59 HN 0.81 KP 1.00* ! LA 37.06 MK 0.74 NL 1.00* OV 1.00* ! PT 0.59 SC 1.00* ! ! ! Fit before self-cal, rms=0.786894Jy sigma=0.021543 ! Fit after self-cal, rms=4.648216Jy sigma=0.001749 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.384 mas, bmaj=7.962 mas, bpa=-0.9755 degrees ! Estimated noise=921.152 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0195556 Jy ! Component: 100 - total flux cleaned = 0.0221085 Jy ! Component: 150 - total flux cleaned = 0.0224476 Jy ! Component: 200 - total flux cleaned = 0.023067 Jy ! Total flux subtracted in 200 components = 0.023067 Jy ! Clean residual min=-0.018703 max=0.017330 Jy/beam ! Clean residual mean=0.000013 rms=0.004734 Jy/beam ! Combined flux in latest and established models = 0.455552 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 25 components and 0.455552 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=4.644353Jy sigma=0.001749 ! Fit after self-cal, rms=4.644415Jy sigma=0.001734 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=4.644415Jy sigma=0.001734 ! Fit after self-cal, rms=3.772937Jy sigma=0.001624 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.35 mas, bmaj=7.884 mas, bpa=-1.005 degrees ! Estimated noise=958.295 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0198468 Jy ! Component: 100 - total flux cleaned = 0.0268702 Jy ! Component: 150 - total flux cleaned = 0.0268691 Jy ! Component: 200 - total flux cleaned = 0.0266276 Jy ! Total flux subtracted in 200 components = 0.0266276 Jy ! Clean residual min=-0.015909 max=0.017468 Jy/beam ! Clean residual mean=0.000010 rms=0.004340 Jy/beam ! Combined flux in latest and established models = 0.482179 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 36 components and 0.482179 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=3.768782Jy sigma=0.001641 ! Fit after self-cal, rms=3.768803Jy sigma=0.001641 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.03433e-06 Jy ! Component: 100 - total flux cleaned = -0.000220076 Jy ! Component: 150 - total flux cleaned = -0.000429698 Jy ! Component: 200 - total flux cleaned = -0.000632632 Jy ! Total flux subtracted in 200 components = -0.000632632 Jy ! Clean residual min=-0.015437 max=0.017198 Jy/beam ! Clean residual mean=0.000010 rms=0.004298 Jy/beam ! Combined flux in latest and established models = 0.481547 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 37 components and 0.481547 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=3.768665Jy sigma=0.001633 ! Fit after self-cal, rms=3.768668Jy sigma=0.001633 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=3.768668Jy sigma=0.001633 ! Fit after self-cal, rms=0.061571Jy sigma=0.000776 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.346 mas, bmaj=7.881 mas, bpa=-1.227 degrees ! Estimated noise=955.943 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00027728 Jy ! Component: 100 - total flux cleaned = -0.000518469 Jy ! Component: 150 - total flux cleaned = -0.000728777 Jy ! Component: 200 - total flux cleaned = -0.00092617 Jy ! Total flux subtracted in 200 components = -0.00092617 Jy ! Clean residual min=-0.006625 max=0.005731 Jy/beam ! Clean residual mean=0.000002 rms=0.001355 Jy/beam ! Combined flux in latest and established models = 0.48062 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 43 components and 0.48062 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.059794Jy sigma=0.000753 ! Fit after self-cal, rms=0.059693Jy sigma=0.000753 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000216906 Jy ! Component: 100 - total flux cleaned = -0.000213628 Jy ! Component: 150 - total flux cleaned = -0.000381747 Jy ! Component: 200 - total flux cleaned = -0.000543759 Jy ! Total flux subtracted in 200 components = -0.000543759 Jy ! Clean residual min=-0.005958 max=0.005281 Jy/beam ! Clean residual mean=0.000002 rms=0.001261 Jy/beam ! Combined flux in latest and established models = 0.480077 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 48 components and 0.480077 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058651Jy sigma=0.000740 ! Fit after self-cal, rms=0.058632Jy sigma=0.000740 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058632Jy sigma=0.000740 ! Fit after self-cal, rms=0.058295Jy sigma=0.000737 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.63 mas, bmaj=20.38 mas, bpa=1.873 degrees ! Estimated noise=1136.34 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000987204 Jy ! Component: 100 - total flux cleaned = 0.00105877 Jy ! Component: 150 - total flux cleaned = 0.00112233 Jy ! Component: 200 - total flux cleaned = 0.00112128 Jy ! Total flux subtracted in 200 components = 0.00112128 Jy ! Clean residual min=-0.003226 max=0.004730 Jy/beam ! Clean residual mean=0.000002 rms=0.001047 Jy/beam ! Combined flux in latest and established models = 0.481198 Jy selfcal ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 51 components and 0.481198 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057973Jy sigma=0.000733 ! Fit after self-cal, rms=0.057929Jy sigma=0.000732 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (16.5, -23.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00318676 Jy ! Component: 100 - total flux cleaned = 0.00402686 Jy ! Component: 150 - total flux cleaned = 0.00419778 Jy ! Component: 200 - total flux cleaned = 0.00427146 Jy ! Total flux subtracted in 200 components = 0.00427146 Jy ! Clean residual min=-0.002574 max=0.002842 Jy/beam ! Clean residual mean=0.000010 rms=0.000805 Jy/beam ! Combined flux in latest and established models = 0.485469 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 84 components and 0.485469 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057586Jy sigma=0.000727 ! Fit after self-cal, rms=0.057558Jy sigma=0.000726 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.339 mas, bmaj=7.895 mas, bpa=-1.416 degrees ! Estimated noise=952.899 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.339 x 7.895 at -1.416 degrees (North through East) ! Clean map min=-0.0054953 max=0.45257 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.733 mas, bmaj=6.478 mas, bpa=-1.768 degrees ! Estimated noise=1313.71 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.363372 Jy ! Component: 100 - total flux cleaned = 0.443378 Jy ! Component: 150 - total flux cleaned = 0.468282 Jy ! Component: 200 - total flux cleaned = 0.477634 Jy ! Total flux subtracted in 200 components = 0.477634 Jy ! Clean residual min=-0.009870 max=0.010196 Jy/beam ! Clean residual mean=-0.000001 rms=0.001958 Jy/beam ! Combined flux in latest and established models = 0.477634 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 0.477634 Jy ! Inverting map and beam ! Estimated beam: bmin=3.339 mas, bmaj=7.895 mas, bpa=-1.416 degrees ! Estimated noise=952.899 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0.5, -11). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00382173 Jy ! Component: 100 - total flux cleaned = 0.00489939 Jy ! Component: 150 - total flux cleaned = 0.00562257 Jy ! Component: 200 - total flux cleaned = 0.00626994 Jy ! Total flux subtracted in 200 components = 0.00626994 Jy ! Clean residual min=-0.003886 max=0.004622 Jy/beam ! Clean residual mean=0.000004 rms=0.001023 Jy/beam ! Combined flux in latest and established models = 0.483904 Jy ! Adding 22 model components to the UV plane model. ! The established model now contains 34 components and 0.483904 Jy ! Inverting map ! Added new window around map position (48, -109). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00137114 Jy ! Component: 100 - total flux cleaned = 0.00171412 Jy ! Component: 150 - total flux cleaned = 0.0018726 Jy ! Component: 200 - total flux cleaned = 0.00216684 Jy ! Total flux subtracted in 200 components = 0.00216684 Jy ! Clean residual min=-0.003395 max=0.003977 Jy/beam ! Clean residual mean=0.000008 rms=0.000875 Jy/beam ! Combined flux in latest and established models = 0.486071 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 52 components and 0.486071 Jy ! Inverting map ! Added new window around map position (2.5, 53). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00210457 Jy ! Component: 100 - total flux cleaned = 0.00236074 Jy ! Component: 150 - total flux cleaned = 0.0024769 Jy ! Component: 200 - total flux cleaned = 0.00247423 Jy ! Total flux subtracted in 200 components = 0.00247423 Jy ! Clean residual min=-0.003127 max=0.003189 Jy/beam ! Clean residual mean=0.000011 rms=0.000770 Jy/beam ! Combined flux in latest and established models = 0.488545 Jy ! Adding 40 model components to the UV plane model. ! The established model now contains 68 components and 0.488545 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.63 mas, bmaj=20.38 mas, bpa=1.873 degrees ! Estimated noise=1136.34 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00168916 Jy ! Component: 100 - total flux cleaned = -0.00239369 Jy ! Component: 150 - total flux cleaned = -0.00239376 Jy ! Component: 200 - total flux cleaned = -0.00256294 Jy ! Total flux subtracted in 200 components = -0.00256294 Jy ! Clean residual min=-0.002480 max=0.002485 Jy/beam ! Clean residual mean=0.000012 rms=0.000667 Jy/beam ! Combined flux in latest and established models = 0.485982 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000156493 Jy ! Component: 100 - total flux cleaned = -0.000349459 Jy ! Component: 150 - total flux cleaned = -0.000439793 Jy ! Component: 200 - total flux cleaned = -0.000482357 Jy ! Total flux subtracted in 200 components = -0.000482357 Jy ! Clean residual min=-0.002315 max=0.002432 Jy/beam ! Clean residual mean=0.000010 rms=0.000628 Jy/beam ! Combined flux in latest and established models = 0.4855 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 99 components and 0.4855 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.339 mas, bmaj=7.895 mas, bpa=-1.416 degrees ! Estimated noise=952.899 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00107987 Jy ! Component: 100 - total flux cleaned = 0.00127422 Jy ! Component: 150 - total flux cleaned = 0.00127223 Jy ! Component: 200 - total flux cleaned = 0.00136134 Jy ! Total flux subtracted in 200 components = 0.00136134 Jy ! Clean residual min=-0.002635 max=0.002617 Jy/beam ! Clean residual mean=0.000007 rms=0.000652 Jy/beam ! Combined flux in latest and established models = 0.486862 Jy selfcal ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 115 components and 0.486862 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054237Jy sigma=0.000686 ! Fit after self-cal, rms=0.054146Jy sigma=0.000686 wmodel J0539-2839_S_2017_05_27_pus_map.mod ! Writing 115 model components to file: J0539-2839_S_2017_05_27_pus_map.mod wobs J0539-2839_S_2017_05_27_pus_uvs.fits ! Writing UV FITS file: J0539-2839_S_2017_05_27_pus_uvs.fits wwins J0539-2839_S_2017_05_27_pus_map.win ! wwins: Wrote 5 windows to J0539-2839_S_2017_05_27_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -5.23661e-05 Jy ! Component: 100 - total flux cleaned = -0.000318474 Jy ! Component: 150 - total flux cleaned = -0.000192225 Jy ! Component: 200 - total flux cleaned = 5.21221e-05 Jy ! Component: 250 - total flux cleaned = 0.000406638 Jy ! Component: 300 - total flux cleaned = 0.000713152 Jy ! Component: 350 - total flux cleaned = 0.00104882 Jy ! Component: 400 - total flux cleaned = 0.00137532 Jy ! Component: 450 - total flux cleaned = 0.00158749 Jy ! Component: 500 - total flux cleaned = 0.00189923 Jy ! Component: 550 - total flux cleaned = 0.00216999 Jy ! Component: 600 - total flux cleaned = 0.00233544 Jy ! Component: 650 - total flux cleaned = 0.00259421 Jy ! Component: 700 - total flux cleaned = 0.0027206 Jy ! Component: 750 - total flux cleaned = 0.00290861 Jy ! Component: 800 - total flux cleaned = 0.00315451 Jy ! Component: 850 - total flux cleaned = 0.00333598 Jy ! Component: 900 - total flux cleaned = 0.00357392 Jy ! Component: 950 - total flux cleaned = 0.00374927 Jy ! Component: 1000 - total flux cleaned = 0.00395049 Jy ! Component: 1050 - total flux cleaned = 0.00412072 Jy ! Component: 1100 - total flux cleaned = 0.00420467 Jy ! Component: 1150 - total flux cleaned = 0.00434256 Jy ! Component: 1200 - total flux cleaned = 0.00447882 Jy ! Component: 1250 - total flux cleaned = 0.0045325 Jy ! Component: 1300 - total flux cleaned = 0.00466515 Jy ! Component: 1350 - total flux cleaned = 0.00479569 Jy ! Component: 1400 - total flux cleaned = 0.00484766 Jy ! Component: 1450 - total flux cleaned = 0.00500081 Jy ! Component: 1500 - total flux cleaned = 0.00510144 Jy ! Component: 1550 - total flux cleaned = 0.00530026 Jy ! Component: 1600 - total flux cleaned = 0.00532451 Jy ! Component: 1650 - total flux cleaned = 0.00542167 Jy ! Component: 1700 - total flux cleaned = 0.00549405 Jy ! Component: 1750 - total flux cleaned = 0.00561304 Jy ! Component: 1800 - total flux cleaned = 0.00570705 Jy ! Component: 1850 - total flux cleaned = 0.00586951 Jy ! Component: 1900 - total flux cleaned = 0.00600733 Jy ! Component: 1950 - total flux cleaned = 0.0060749 Jy ! Component: 2000 - total flux cleaned = 0.00611982 Jy ! Component: 2050 - total flux cleaned = 0.00632041 Jy ! Component: 2100 - total flux cleaned = 0.00645249 Jy ! Component: 2150 - total flux cleaned = 0.00656165 Jy ! Component: 2200 - total flux cleaned = 0.00669127 Jy ! Component: 2250 - total flux cleaned = 0.00677638 Jy ! Component: 2300 - total flux cleaned = 0.00690306 Jy ! Component: 2350 - total flux cleaned = 0.0070499 Jy ! Component: 2400 - total flux cleaned = 0.00719489 Jy ! Component: 2450 - total flux cleaned = 0.00731782 Jy ! Component: 2500 - total flux cleaned = 0.00743991 Jy ! Component: 2550 - total flux cleaned = 0.00762117 Jy ! Component: 2600 - total flux cleaned = 0.00770076 Jy ! Component: 2650 - total flux cleaned = 0.00770084 Jy ! Component: 2700 - total flux cleaned = 0.00781857 Jy ! Component: 2750 - total flux cleaned = 0.00787706 Jy ! Component: 2800 - total flux cleaned = 0.00801203 Jy ! Component: 2850 - total flux cleaned = 0.0080693 Jy ! Component: 2900 - total flux cleaned = 0.00814528 Jy ! Component: 2950 - total flux cleaned = 0.00827665 Jy ! Component: 3000 - total flux cleaned = 0.00831398 Jy ! Component: 3050 - total flux cleaned = 0.00831406 Jy ! Component: 3100 - total flux cleaned = 0.00842433 Jy ! Component: 3150 - total flux cleaned = 0.00849688 Jy ! Component: 3200 - total flux cleaned = 0.00855089 Jy ! Component: 3250 - total flux cleaned = 0.00860456 Jy ! Component: 3300 - total flux cleaned = 0.00864002 Jy ! Component: 3350 - total flux cleaned = 0.00869296 Jy ! Component: 3400 - total flux cleaned = 0.00876273 Jy ! Component: 3450 - total flux cleaned = 0.00872812 Jy ! Component: 3500 - total flux cleaned = 0.00888389 Jy ! Component: 3550 - total flux cleaned = 0.00890096 Jy ! Component: 3600 - total flux cleaned = 0.00893525 Jy ! Component: 3650 - total flux cleaned = 0.00905381 Jy ! Component: 3700 - total flux cleaned = 0.00901996 Jy ! Component: 3750 - total flux cleaned = 0.00908697 Jy ! Component: 3800 - total flux cleaned = 0.0091867 Jy ! Component: 3850 - total flux cleaned = 0.00921983 Jy ! Component: 3900 - total flux cleaned = 0.00928548 Jy ! Component: 3950 - total flux cleaned = 0.00935084 Jy ! Component: 4000 - total flux cleaned = 0.0094482 Jy ! Component: 4050 - total flux cleaned = 0.00957717 Jy ! Total flux subtracted in 4096 components = 0.00962534 Jy ! Clean residual min=-0.001006 max=0.001040 Jy/beam ! Clean residual mean=0.000005 rms=0.000286 Jy/beam ! Combined flux in latest and established models = 0.496487 Jy keep ! Adding 242 model components to the UV plane model. ! The established model now contains 354 components and 0.496487 Jy ![Exited script file: muppet] wmap "J0539-2839_S_2017_05_27_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.339 x 7.895 at -1.416 degrees (North through East) ! Clean map min=-0.0026098 max=0.46297 Jy/beam ! Writing clean map to FITS file: J0539-2839_S_2017_05_27_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.462972 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000282228 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.18288 0.18288 0.36576 0.731521 1.46304 2.92608 5.85217 11.7043 23.4087 46.8173 93.6347 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.462 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.339 x 7.895 at -1.416 degrees (North through East) ! Clean map min=-0.0026098 max=0.46297 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0539-2839_S_2017_05_27_pus_uvs.log closed on Fri May 3 10:57:56 2019