! Started logfile: J0539-2839_S_2017_04_28_pus_uvs.log on Thu May 2 16:17:47 2019 obs J0539-2839_S_2017_04_28_pus_uva.fits ! Reading UV FITS file: J0539-2839_S_2017_04_28_pus_uva.fits ! AN table 1: 32 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.28125 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0539-2839 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 671 lines of history. ! ! Reading 1620 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0539-2839_S_2017_04_28_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 167 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 167 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 167 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 284 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.349541Jy sigma=0.002056 ! Fit after self-cal, rms=0.313490Jy sigma=0.001831 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.639 mas, bmaj=6.233 mas, bpa=6.294 degrees ! Estimated noise=4138.46 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.921923 Jy ! Component: 100 - total flux cleaned = 1.13468 Jy ! Total flux subtracted in 100 components = 1.13468 Jy ! Clean residual min=-0.058800 max=0.086591 Jy/beam ! Clean residual mean=0.000008 rms=0.016401 Jy/beam ! Combined flux in latest and established models = 1.13468 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 1.13468 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.233791Jy sigma=0.001349 ! Fit after self-cal, rms=0.233796Jy sigma=0.001349 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.31 mas, bmaj=6.693 mas, bpa=2.154 degrees ! Estimated noise=3378.47 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.106536 Jy ! Component: 100 - total flux cleaned = 0.150732 Jy ! Component: 150 - total flux cleaned = 0.157737 Jy ! Component: 200 - total flux cleaned = 0.159278 Jy ! Total flux subtracted in 200 components = 0.159278 Jy ! Clean residual min=-0.041537 max=0.065580 Jy/beam ! Clean residual mean=0.000064 rms=0.013989 Jy/beam ! Combined flux in latest and established models = 1.29396 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 18 components and 1.29396 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.183970Jy sigma=0.001067 ! Fit after self-cal, rms=0.183869Jy sigma=0.001066 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 66 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.89 FD 0.98 HN 1.00* KP 0.99 ! LA 0.97 MK 1.02 NL 1.07 OV 0.99 ! PT 1.06 SC 0.94 ! ! ! Correcting IF 2. ! A total of 66 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.89 HN 1.00* KP 0.95 ! LA 0.92 MK 1.02 NL 1.42 OV 1.02 ! PT 1.05 SC 1.00 ! ! ! Correcting IF 3. ! A total of 66 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.94 HN 1.00* KP 0.98 ! LA 0.97 MK 1.04 NL 1.24 OV 0.93 ! PT 1.03 SC 0.99 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 0.97 HN 1.00* KP 1.00* ! LA 1.00* MK 0.98 NL 1.00* OV 1.00* ! PT 1.08 SC 1.00* ! ! ! Fit before self-cal, rms=0.183869Jy sigma=0.001066 ! Fit after self-cal, rms=0.118263Jy sigma=0.000674 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.216 mas, bmaj=8.022 mas, bpa=9.563 degrees ! Estimated noise=3601.85 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-19.5, 120.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0117179 Jy ! Component: 100 - total flux cleaned = 0.0108693 Jy ! Component: 150 - total flux cleaned = 0.0122011 Jy ! Component: 200 - total flux cleaned = 0.0131838 Jy ! Total flux subtracted in 200 components = 0.0131838 Jy ! Clean residual min=-0.010402 max=0.012567 Jy/beam ! Clean residual mean=0.000015 rms=0.002976 Jy/beam ! Combined flux in latest and established models = 1.30714 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 38 components and 1.30714 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116123Jy sigma=0.000662 ! Fit after self-cal, rms=0.116183Jy sigma=0.000662 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116183Jy sigma=0.000662 ! Fit after self-cal, rms=0.115982Jy sigma=0.000661 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.219 mas, bmaj=8.03 mas, bpa=9.569 degrees ! Estimated noise=3599.7 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000848152 Jy ! Component: 100 - total flux cleaned = 0.00172791 Jy ! Component: 150 - total flux cleaned = 0.00235459 Jy ! Component: 200 - total flux cleaned = 0.00291524 Jy ! Total flux subtracted in 200 components = 0.00291524 Jy ! Clean residual min=-0.008684 max=0.010306 Jy/beam ! Clean residual mean=0.000039 rms=0.002698 Jy/beam ! Combined flux in latest and established models = 1.31006 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 45 components and 1.31006 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115481Jy sigma=0.000658 ! Fit after self-cal, rms=0.115462Jy sigma=0.000658 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000124279 Jy ! Component: 100 - total flux cleaned = 0.000505206 Jy ! Component: 150 - total flux cleaned = 0.000964387 Jy ! Component: 200 - total flux cleaned = 0.00128218 Jy ! Total flux subtracted in 200 components = 0.00128218 Jy ! Clean residual min=-0.008622 max=0.009702 Jy/beam ! Clean residual mean=0.000044 rms=0.002619 Jy/beam ! Combined flux in latest and established models = 1.31134 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 56 components and 1.31134 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115227Jy sigma=0.000657 ! Fit after self-cal, rms=0.115223Jy sigma=0.000657 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115223Jy sigma=0.000657 ! Fit after self-cal, rms=0.115280Jy sigma=0.000657 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.223 mas, bmaj=8.038 mas, bpa=9.6 degrees ! Estimated noise=3602.56 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000214879 Jy ! Component: 100 - total flux cleaned = 0.000202674 Jy ! Component: 150 - total flux cleaned = 0.000488603 Jy ! Component: 200 - total flux cleaned = 0.000749852 Jy ! Total flux subtracted in 200 components = 0.000749852 Jy ! Clean residual min=-0.008249 max=0.009413 Jy/beam ! Clean residual mean=0.000052 rms=0.002551 Jy/beam ! Combined flux in latest and established models = 1.31209 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 60 components and 1.31209 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115092Jy sigma=0.000656 ! Fit after self-cal, rms=0.115096Jy sigma=0.000656 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.15539e-05 Jy ! Component: 100 - total flux cleaned = 0.000219878 Jy ! Component: 150 - total flux cleaned = 0.000371071 Jy ! Component: 200 - total flux cleaned = 0.000442506 Jy ! Total flux subtracted in 200 components = 0.000442506 Jy ! Clean residual min=-0.008247 max=0.009273 Jy/beam ! Clean residual mean=0.000053 rms=0.002516 Jy/beam ! Combined flux in latest and established models = 1.31253 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 72 components and 1.31253 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114989Jy sigma=0.000655 ! Fit after self-cal, rms=0.114993Jy sigma=0.000655 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114993Jy sigma=0.000655 ! Fit after self-cal, rms=0.115049Jy sigma=0.000655 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.423 mas, bmaj=23.25 mas, bpa=16.44 degrees ! Estimated noise=4412.21 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00200792 Jy ! Component: 100 - total flux cleaned = 0.00164169 Jy ! Component: 150 - total flux cleaned = 0.00141774 Jy ! Component: 200 - total flux cleaned = 0.00154698 Jy ! Total flux subtracted in 200 components = 0.00154698 Jy ! Clean residual min=-0.010392 max=0.010023 Jy/beam ! Clean residual mean=0.000107 rms=0.003184 Jy/beam ! Combined flux in latest and established models = 1.31408 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 78 components and 1.31408 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115083Jy sigma=0.000655 ! Fit after self-cal, rms=0.114987Jy sigma=0.000655 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00068951 Jy ! Component: 100 - total flux cleaned = 0.000601527 Jy ! Component: 150 - total flux cleaned = 0.000599274 Jy ! Component: 200 - total flux cleaned = 0.000546398 Jy ! Total flux subtracted in 200 components = 0.000546398 Jy ! Clean residual min=-0.010063 max=0.010103 Jy/beam ! Clean residual mean=0.000107 rms=0.003142 Jy/beam ! Combined flux in latest and established models = 1.31463 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 86 components and 1.31462 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115051Jy sigma=0.000655 ! Fit after self-cal, rms=0.114994Jy sigma=0.000655 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.225 mas, bmaj=8.042 mas, bpa=9.632 degrees ! Estimated noise=3604.9 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.225 x 8.042 at 9.632 degrees (North through East) ! Clean map min=-0.0075071 max=1.2062 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114994Jy sigma=0.000655 ! Fit after self-cal, rms=0.107581Jy sigma=0.000602 ! Inverting map and beam ! Estimated beam: bmin=3.229 mas, bmaj=8.048 mas, bpa=9.722 degrees ! Estimated noise=3611.61 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000556097 Jy ! Component: 100 - total flux cleaned = -0.00062333 Jy ! Component: 150 - total flux cleaned = -0.000559178 Jy ! Component: 200 - total flux cleaned = -0.000556996 Jy ! Total flux subtracted in 200 components = -0.000556996 Jy ! Clean residual min=-0.007818 max=0.008807 Jy/beam ! Clean residual mean=0.000062 rms=0.002410 Jy/beam ! Combined flux in latest and established models = 1.31407 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 97 components and 1.31407 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107487Jy sigma=0.000602 ! Fit after self-cal, rms=0.107493Jy sigma=0.000602 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000134078 Jy ! Component: 100 - total flux cleaned = -2.18419e-05 Jy ! Component: 150 - total flux cleaned = 3.22414e-05 Jy ! Component: 200 - total flux cleaned = 0.00018597 Jy ! Total flux subtracted in 200 components = 0.00018597 Jy ! Clean residual min=-0.007828 max=0.008821 Jy/beam ! Clean residual mean=0.000062 rms=0.002393 Jy/beam ! Combined flux in latest and established models = 1.31425 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 103 components and 1.31425 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107433Jy sigma=0.000602 ! Fit after self-cal, rms=0.107439Jy sigma=0.000602 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107439Jy sigma=0.000602 ! Fit after self-cal, rms=0.107463Jy sigma=0.000602 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.594 mas, bmaj=6.91 mas, bpa=9.783 degrees ! Estimated noise=4371.34 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.927634 Jy ! Component: 100 - total flux cleaned = 1.1391 Jy ! Component: 150 - total flux cleaned = 1.21918 Jy ! Component: 200 - total flux cleaned = 1.25872 Jy ! Total flux subtracted in 200 components = 1.25872 Jy ! Clean residual min=-0.019104 max=0.025314 Jy/beam ! Clean residual mean=-0.000008 rms=0.004989 Jy/beam ! Combined flux in latest and established models = 1.25873 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 1.25873 Jy ! Inverting map and beam ! Estimated beam: bmin=3.23 mas, bmaj=8.05 mas, bpa=9.744 degrees ! Estimated noise=3612.31 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (4, -6.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.028782 Jy ! Component: 100 - total flux cleaned = 0.0430054 Jy ! Component: 150 - total flux cleaned = 0.0483339 Jy ! Component: 200 - total flux cleaned = 0.052279 Jy ! Total flux subtracted in 200 components = 0.052279 Jy ! Clean residual min=-0.009426 max=0.008911 Jy/beam ! Clean residual mean=0.000047 rms=0.002681 Jy/beam ! Combined flux in latest and established models = 1.311 Jy ! Adding 24 model components to the UV plane model. ! The established model now contains 37 components and 1.311 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.424 mas, bmaj=23.29 mas, bpa=16.5 degrees ! Estimated noise=4414.22 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00196055 Jy ! Component: 100 - total flux cleaned = 0.0034031 Jy ! Component: 150 - total flux cleaned = 0.00482492 Jy ! Component: 200 - total flux cleaned = 0.00588033 Jy ! Total flux subtracted in 200 components = 0.00588033 Jy ! Clean residual min=-0.010196 max=0.010699 Jy/beam ! Clean residual mean=0.000117 rms=0.003088 Jy/beam ! Combined flux in latest and established models = 1.31688 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000888678 Jy ! Component: 100 - total flux cleaned = 0.00127673 Jy ! Component: 150 - total flux cleaned = 0.0016292 Jy ! Component: 200 - total flux cleaned = 0.00200906 Jy ! Total flux subtracted in 200 components = 0.00200906 Jy ! Clean residual min=-0.009483 max=0.010783 Jy/beam ! Clean residual mean=0.000125 rms=0.003037 Jy/beam ! Combined flux in latest and established models = 1.31889 Jy ! Adding 16 model components to the UV plane model. ! The established model now contains 51 components and 1.31889 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.23 mas, bmaj=8.05 mas, bpa=9.744 degrees ! Estimated noise=3612.31 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00124358 Jy ! Component: 100 - total flux cleaned = -0.00144795 Jy ! Component: 150 - total flux cleaned = -0.00127511 Jy ! Component: 200 - total flux cleaned = -0.000827913 Jy ! Total flux subtracted in 200 components = -0.000827913 Jy ! Clean residual min=-0.008338 max=0.008677 Jy/beam ! Clean residual mean=0.000068 rms=0.002383 Jy/beam ! Combined flux in latest and established models = 1.31807 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 65 components and 1.31807 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107563Jy sigma=0.000602 ! Fit after self-cal, rms=0.107478Jy sigma=0.000602 wmodel J0539-2839_S_2017_04_28_pus_map.mod ! Writing 65 model components to file: J0539-2839_S_2017_04_28_pus_map.mod wobs J0539-2839_S_2017_04_28_pus_uvs.fits ! Writing UV FITS file: J0539-2839_S_2017_04_28_pus_uvs.fits wwins J0539-2839_S_2017_04_28_pus_map.win ! wwins: Wrote 3 windows to J0539-2839_S_2017_04_28_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000891063 Jy ! Component: 100 - total flux cleaned = -0.00290209 Jy ! Component: 150 - total flux cleaned = -0.00410821 Jy ! Component: 200 - total flux cleaned = -0.00512027 Jy ! Component: 250 - total flux cleaned = -0.00633169 Jy ! Component: 300 - total flux cleaned = -0.0071409 Jy ! Component: 350 - total flux cleaned = -0.00769559 Jy ! Component: 400 - total flux cleaned = -0.00864525 Jy ! Component: 450 - total flux cleaned = -0.00945514 Jy ! Component: 500 - total flux cleaned = -0.00994303 Jy ! Component: 550 - total flux cleaned = -0.0104145 Jy ! Component: 600 - total flux cleaned = -0.0106912 Jy ! Component: 650 - total flux cleaned = -0.0112212 Jy ! Component: 700 - total flux cleaned = -0.0113921 Jy ! Component: 750 - total flux cleaned = -0.0114747 Jy ! Component: 800 - total flux cleaned = -0.011395 Jy ! Component: 850 - total flux cleaned = -0.0113935 Jy ! Component: 900 - total flux cleaned = -0.0112432 Jy ! Component: 950 - total flux cleaned = -0.011171 Jy ! Component: 1000 - total flux cleaned = -0.0110985 Jy ! Component: 1050 - total flux cleaned = -0.0111691 Jy ! Component: 1100 - total flux cleaned = -0.0112383 Jy ! Component: 1150 - total flux cleaned = -0.0113064 Jy ! Component: 1200 - total flux cleaned = -0.011438 Jy ! Component: 1250 - total flux cleaned = -0.0116928 Jy ! Component: 1300 - total flux cleaned = -0.0116917 Jy ! Component: 1350 - total flux cleaned = -0.0117539 Jy ! Component: 1400 - total flux cleaned = -0.0118144 Jy ! Component: 1450 - total flux cleaned = -0.0118703 Jy ! Component: 1500 - total flux cleaned = -0.0116387 Jy ! Component: 1550 - total flux cleaned = -0.0116943 Jy ! Component: 1600 - total flux cleaned = -0.011859 Jy ! Component: 1650 - total flux cleaned = -0.0118042 Jy ! Component: 1700 - total flux cleaned = -0.0117517 Jy ! Component: 1750 - total flux cleaned = -0.0118043 Jy ! Component: 1800 - total flux cleaned = -0.0117531 Jy ! Component: 1850 - total flux cleaned = -0.0116522 Jy ! Component: 1900 - total flux cleaned = -0.0118024 Jy ! Component: 1950 - total flux cleaned = -0.0117529 Jy ! Component: 2000 - total flux cleaned = -0.011802 Jy ! Component: 2050 - total flux cleaned = -0.0118019 Jy ! Component: 2100 - total flux cleaned = -0.0118976 Jy ! Component: 2150 - total flux cleaned = -0.0118974 Jy ! Component: 2200 - total flux cleaned = -0.0119439 Jy ! Component: 2250 - total flux cleaned = -0.0118972 Jy ! Component: 2300 - total flux cleaned = -0.0118972 Jy ! Component: 2350 - total flux cleaned = -0.0119423 Jy ! Component: 2400 - total flux cleaned = -0.0120313 Jy ! Component: 2450 - total flux cleaned = -0.0119866 Jy ! Component: 2500 - total flux cleaned = -0.0120307 Jy ! Component: 2550 - total flux cleaned = -0.0120305 Jy ! Component: 2600 - total flux cleaned = -0.0119874 Jy ! Component: 2650 - total flux cleaned = -0.0120305 Jy ! Component: 2700 - total flux cleaned = -0.012073 Jy ! Component: 2750 - total flux cleaned = -0.012073 Jy ! Component: 2800 - total flux cleaned = -0.0120732 Jy ! Component: 2850 - total flux cleaned = -0.0121153 Jy ! Component: 2900 - total flux cleaned = -0.0120738 Jy ! Component: 2950 - total flux cleaned = -0.0121563 Jy ! Component: 3000 - total flux cleaned = -0.0121974 Jy ! Component: 3050 - total flux cleaned = -0.0122791 Jy ! Component: 3100 - total flux cleaned = -0.0123606 Jy ! Component: 3150 - total flux cleaned = -0.0124823 Jy ! Component: 3200 - total flux cleaned = -0.0125228 Jy ! Component: 3250 - total flux cleaned = -0.012644 Jy ! Component: 3300 - total flux cleaned = -0.012725 Jy ! Component: 3350 - total flux cleaned = -0.0127251 Jy ! Component: 3400 - total flux cleaned = -0.0129662 Jy ! Component: 3450 - total flux cleaned = -0.0130868 Jy ! Component: 3500 - total flux cleaned = -0.0131671 Jy ! Component: 3550 - total flux cleaned = -0.0132876 Jy ! Component: 3600 - total flux cleaned = -0.0134884 Jy ! Component: 3650 - total flux cleaned = -0.0136088 Jy ! Component: 3700 - total flux cleaned = -0.0137694 Jy ! Component: 3750 - total flux cleaned = -0.0139301 Jy ! Component: 3800 - total flux cleaned = -0.0140505 Jy ! Component: 3850 - total flux cleaned = -0.0141711 Jy ! Component: 3900 - total flux cleaned = -0.0142916 Jy ! Component: 3950 - total flux cleaned = -0.0144122 Jy ! Component: 4000 - total flux cleaned = -0.0145328 Jy ! Component: 4050 - total flux cleaned = -0.0146133 Jy ! Total flux subtracted in 4096 components = -0.014734 Jy ! Clean residual min=-0.002199 max=0.002579 Jy/beam ! Clean residual mean=-0.000021 rms=0.000695 Jy/beam ! Combined flux in latest and established models = 1.30333 Jy keep ! Adding 224 model components to the UV plane model. ! The established model now contains 289 components and 1.30333 Jy ![Exited script file: muppet] wmap "J0539-2839_S_2017_04_28_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.23 x 8.05 at 9.744 degrees (North through East) ! Clean map min=-0.0076599 max=1.2094 Jy/beam ! Writing clean map to FITS file: J0539-2839_S_2017_04_28_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 1.20941 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000682425 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.169279 0.169279 0.338557 0.677115 1.35423 2.70846 5.41692 10.8338 21.6677 43.3353 86.6707 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.002 print "peak=",int(1000*peak_flux)/1000 ! peak= 1.209 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.23 x 8.05 at 9.744 degrees (North through East) ! Clean map min=-0.0076599 max=1.2094 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0539-2839_S_2017_04_28_pus_uvs.log closed on Thu May 2 16:17:52 2019