! Started logfile: J0539-0514_S_2017_10_09_pus_uvs.log on Sun May 12 13:05:37 2019 obs J0539-0514_S_2017_10_09_pus_uva.fits ! Reading UV FITS file: J0539-0514_S_2017_10_09_pus_uva.fits ! AN table 1: 115 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.459179 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0539-0514 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 496 lines of history. ! ! Reading 7604 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0539-0514_S_2017_10_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 350 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 433 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 500 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 948 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.984170Jy sigma=0.008401 ! Fit after self-cal, rms=0.941332Jy sigma=0.008037 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=5.433 mas, bmaj=14.01 mas, bpa=-9.582 degrees ! Estimated noise=1983.92 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0453831 Jy ! Component: 100 - total flux cleaned = 0.0564595 Jy ! Total flux subtracted in 100 components = 0.0564595 Jy ! Clean residual min=-0.005741 max=0.006150 Jy/beam ! Clean residual mean=0.000008 rms=0.001818 Jy/beam ! Combined flux in latest and established models = 0.0564595 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.0564595 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084286Jy sigma=0.000664 ! Fit after self-cal, rms=0.083651Jy sigma=0.000659 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=6.381 mas, bmaj=16.89 mas, bpa=-11.28 degrees ! Estimated noise=1268.03 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00673292 Jy ! Component: 100 - total flux cleaned = 0.00930259 Jy ! Component: 150 - total flux cleaned = 0.0099623 Jy ! Component: 200 - total flux cleaned = 0.0100811 Jy ! Total flux subtracted in 200 components = 0.0100811 Jy ! Clean residual min=-0.003508 max=0.003466 Jy/beam ! Clean residual mean=0.000007 rms=0.000890 Jy/beam ! Combined flux in latest and established models = 0.0665406 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 42 components and 0.0665406 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083073Jy sigma=0.000655 ! Fit after self-cal, rms=0.083090Jy sigma=0.000655 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 1.03 HN 0.99 KP 1.11 ! LA 1.03 MK 1.00* NL 0.85 OV 1.00* ! PT 1.16 ! ! ! Correcting IF 2. ! A total of 87 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.46 FD 0.95 HN 1.10 KP 1.00 ! LA 0.96 MK 1.00* NL 0.99 OV 1.00* ! PT 1.07 ! ! ! Correcting IF 3. ! A total of 48 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 0.89 HN 1.00 KP 0.93 ! LA 0.85 MK 1.00* NL 1.15 OV 1.00* ! PT 0.98 ! ! ! Correcting IF 4. ! A total of 87 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* ! ! ! Fit before self-cal, rms=0.083090Jy sigma=0.000655 ! Fit after self-cal, rms=0.081990Jy sigma=0.000655 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=6.33 mas, bmaj=16.61 mas, bpa=-10.92 degrees ! Estimated noise=1314.59 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000189421 Jy ! Component: 100 - total flux cleaned = -0.00023442 Jy ! Component: 150 - total flux cleaned = -0.000170498 Jy ! Component: 200 - total flux cleaned = -0.000115755 Jy ! Total flux subtracted in 200 components = -0.000115755 Jy ! Clean residual min=-0.003319 max=0.003306 Jy/beam ! Clean residual mean=0.000005 rms=0.000806 Jy/beam ! Combined flux in latest and established models = 0.0664248 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 59 components and 0.0664248 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081960Jy sigma=0.000654 ! Fit after self-cal, rms=0.081913Jy sigma=0.000653 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081913Jy sigma=0.000653 ! Fit after self-cal, rms=0.081144Jy sigma=0.000651 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.341 mas, bmaj=16.65 mas, bpa=-10.84 degrees ! Estimated noise=1311.18 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000290625 Jy ! Component: 100 - total flux cleaned = -0.000289706 Jy ! Component: 150 - total flux cleaned = -0.000224381 Jy ! Component: 200 - total flux cleaned = -0.000168982 Jy ! Total flux subtracted in 200 components = -0.000168982 Jy ! Clean residual min=-0.003082 max=0.002462 Jy/beam ! Clean residual mean=0.000004 rms=0.000759 Jy/beam ! Combined flux in latest and established models = 0.0662558 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 68 components and 0.0662558 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081115Jy sigma=0.000651 ! Fit after self-cal, rms=0.081265Jy sigma=0.000651 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000319534 Jy ! Component: 100 - total flux cleaned = -0.000373461 Jy ! Component: 150 - total flux cleaned = -0.000326435 Jy ! Component: 200 - total flux cleaned = -0.000283499 Jy ! Total flux subtracted in 200 components = -0.000283499 Jy ! Clean residual min=-0.002945 max=0.002694 Jy/beam ! Clean residual mean=0.000006 rms=0.000788 Jy/beam ! Combined flux in latest and established models = 0.0659723 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 81 components and 0.0659723 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081248Jy sigma=0.000650 ! Fit after self-cal, rms=0.081240Jy sigma=0.000650 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081240Jy sigma=0.000650 ! Fit after self-cal, rms=0.081581Jy sigma=0.000650 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.313 mas, bmaj=16.73 mas, bpa=-10.87 degrees ! Estimated noise=1307.81 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000275057 Jy ! Component: 100 - total flux cleaned = 0.000272706 Jy ! Component: 150 - total flux cleaned = 0.000324128 Jy ! Component: 200 - total flux cleaned = 0.000372038 Jy ! Total flux subtracted in 200 components = 0.000372038 Jy ! Clean residual min=-0.002916 max=0.002708 Jy/beam ! Clean residual mean=0.000003 rms=0.000778 Jy/beam ! Combined flux in latest and established models = 0.0663444 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 85 components and 0.0663444 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081559Jy sigma=0.000650 ! Fit after self-cal, rms=0.081658Jy sigma=0.000650 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000127117 Jy ! Component: 100 - total flux cleaned = -0.000154403 Jy ! Component: 150 - total flux cleaned = -0.000153485 Jy ! Component: 200 - total flux cleaned = -0.000130674 Jy ! Total flux subtracted in 200 components = -0.000130674 Jy ! Clean residual min=-0.002893 max=0.002788 Jy/beam ! Clean residual mean=0.000004 rms=0.000793 Jy/beam ! Combined flux in latest and established models = 0.0662137 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 88 components and 0.0662137 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081641Jy sigma=0.000650 ! Fit after self-cal, rms=0.081635Jy sigma=0.000650 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081635Jy sigma=0.000650 ! Fit after self-cal, rms=0.081894Jy sigma=0.000650 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.828 mas, bmaj=17.74 mas, bpa=-13.24 degrees ! Estimated noise=1393.55 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000359784 Jy ! Component: 100 - total flux cleaned = 0.000422502 Jy ! Component: 150 - total flux cleaned = 0.000388025 Jy ! Component: 200 - total flux cleaned = 0.000357199 Jy ! Total flux subtracted in 200 components = 0.000357199 Jy ! Clean residual min=-0.002868 max=0.002858 Jy/beam ! Clean residual mean=0.000003 rms=0.000769 Jy/beam ! Combined flux in latest and established models = 0.0665709 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 93 components and 0.0665709 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081883Jy sigma=0.000650 ! Fit after self-cal, rms=0.081931Jy sigma=0.000650 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.98138e-05 Jy ! Component: 100 - total flux cleaned = -0.000130904 Jy ! Component: 150 - total flux cleaned = -0.000159304 Jy ! Component: 200 - total flux cleaned = -0.00017211 Jy ! Total flux subtracted in 200 components = -0.00017211 Jy ! Clean residual min=-0.002869 max=0.002890 Jy/beam ! Clean residual mean=0.000003 rms=0.000773 Jy/beam ! Combined flux in latest and established models = 0.0663988 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 101 components and 0.0663988 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081926Jy sigma=0.000650 ! Fit after self-cal, rms=0.081922Jy sigma=0.000650 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=6.29 mas, bmaj=16.81 mas, bpa=-10.92 degrees ! Estimated noise=1305.85 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 6.29 x 16.81 at -10.92 degrees (North through East) ! Clean map min=-0.0028401 max=0.058785 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=5.393 mas, bmaj=14.27 mas, bpa=-8.985 degrees ! Estimated noise=1876.46 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0458586 Jy ! Component: 100 - total flux cleaned = 0.0571592 Jy ! Component: 150 - total flux cleaned = 0.0619391 Jy ! Component: 200 - total flux cleaned = 0.062843 Jy ! Total flux subtracted in 200 components = 0.062843 Jy ! Clean residual min=-0.005115 max=0.004615 Jy/beam ! Clean residual mean=0.000004 rms=0.001269 Jy/beam ! Combined flux in latest and established models = 0.062843 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 0.062843 Jy ! Inverting map and beam ! Estimated beam: bmin=6.29 mas, bmaj=16.81 mas, bpa=-10.92 degrees ! Estimated noise=1305.85 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00258732 Jy ! Component: 100 - total flux cleaned = 0.00268362 Jy ! Component: 150 - total flux cleaned = 0.00276061 Jy ! Component: 200 - total flux cleaned = 0.00282187 Jy ! Total flux subtracted in 200 components = 0.00282187 Jy ! Clean residual min=-0.003117 max=0.003056 Jy/beam ! Clean residual mean=0.000003 rms=0.000848 Jy/beam ! Combined flux in latest and established models = 0.0656649 Jy ! Adding 23 model components to the UV plane model. ! The established model now contains 41 components and 0.0656649 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.828 mas, bmaj=17.74 mas, bpa=-13.24 degrees ! Estimated noise=1393.55 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000624774 Jy ! Component: 100 - total flux cleaned = 0.000626364 Jy ! Component: 150 - total flux cleaned = 0.000601463 Jy ! Component: 200 - total flux cleaned = 0.000557859 Jy ! Total flux subtracted in 200 components = 0.000557859 Jy ! Clean residual min=-0.002933 max=0.002911 Jy/beam ! Clean residual mean=0.000003 rms=0.000781 Jy/beam ! Combined flux in latest and established models = 0.0662227 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.73814e-05 Jy ! Component: 100 - total flux cleaned = -5.41776e-05 Jy ! Component: 150 - total flux cleaned = -6.89753e-05 Jy ! Component: 200 - total flux cleaned = -6.89274e-05 Jy ! Total flux subtracted in 200 components = -6.89274e-05 Jy ! Clean residual min=-0.002904 max=0.002877 Jy/beam ! Clean residual mean=0.000003 rms=0.000774 Jy/beam ! Combined flux in latest and established models = 0.0661538 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 72 components and 0.0661538 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=6.29 mas, bmaj=16.81 mas, bpa=-10.92 degrees ! Estimated noise=1305.85 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000112546 Jy ! Component: 100 - total flux cleaned = 7.78145e-05 Jy ! Component: 150 - total flux cleaned = 7.58015e-05 Jy ! Component: 200 - total flux cleaned = 0.000102941 Jy ! Total flux subtracted in 200 components = 0.000102941 Jy ! Clean residual min=-0.002895 max=0.002855 Jy/beam ! Clean residual mean=0.000003 rms=0.000807 Jy/beam ! Combined flux in latest and established models = 0.0662567 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 87 components and 0.0662567 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081946Jy sigma=0.000650 ! Fit after self-cal, rms=0.081935Jy sigma=0.000650 wmodel J0539-0514_S_2017_10_09_pus_map.mod ! Writing 87 model components to file: J0539-0514_S_2017_10_09_pus_map.mod wobs J0539-0514_S_2017_10_09_pus_uvs.fits ! Writing UV FITS file: J0539-0514_S_2017_10_09_pus_uvs.fits wwins J0539-0514_S_2017_10_09_pus_map.win ! wwins: Wrote 1 windows to J0539-0514_S_2017_10_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00038217 Jy ! Component: 100 - total flux cleaned = -0.000807436 Jy ! Component: 150 - total flux cleaned = -0.00119909 Jy ! Component: 200 - total flux cleaned = -0.00156278 Jy ! Component: 250 - total flux cleaned = -0.00186696 Jy ! Component: 300 - total flux cleaned = -0.00194033 Jy ! Component: 350 - total flux cleaned = -0.00190664 Jy ! Component: 400 - total flux cleaned = -0.00190657 Jy ! Component: 450 - total flux cleaned = -0.00181427 Jy ! Component: 500 - total flux cleaned = -0.00178492 Jy ! Component: 550 - total flux cleaned = -0.00184241 Jy ! Component: 600 - total flux cleaned = -0.00178717 Jy ! Component: 650 - total flux cleaned = -0.00178733 Jy ! Component: 700 - total flux cleaned = -0.00173531 Jy ! Component: 750 - total flux cleaned = -0.00170969 Jy ! Component: 800 - total flux cleaned = -0.00168483 Jy ! Component: 850 - total flux cleaned = -0.00163683 Jy ! Component: 900 - total flux cleaned = -0.00165973 Jy ! Component: 950 - total flux cleaned = -0.00170471 Jy ! Component: 1000 - total flux cleaned = -0.00170489 Jy ! Component: 1050 - total flux cleaned = -0.0017269 Jy ! Component: 1100 - total flux cleaned = -0.00176862 Jy ! Component: 1150 - total flux cleaned = -0.00176869 Jy ! Component: 1200 - total flux cleaned = -0.00180867 Jy ! Component: 1250 - total flux cleaned = -0.00182836 Jy ! Component: 1300 - total flux cleaned = -0.00190544 Jy ! Component: 1350 - total flux cleaned = -0.00200016 Jy ! Component: 1400 - total flux cleaned = -0.00207449 Jy ! Component: 1450 - total flux cleaned = -0.00216555 Jy ! Component: 1500 - total flux cleaned = -0.00221919 Jy ! Component: 1550 - total flux cleaned = -0.00228984 Jy ! Component: 1600 - total flux cleaned = -0.0023245 Jy ! Component: 1650 - total flux cleaned = -0.0023926 Jy ! Component: 1700 - total flux cleaned = -0.00247651 Jy ! Component: 1750 - total flux cleaned = -0.00254258 Jy ! Component: 1800 - total flux cleaned = -0.00264033 Jy ! Component: 1850 - total flux cleaned = -0.00270444 Jy ! Component: 1900 - total flux cleaned = -0.00283128 Jy ! Component: 1950 - total flux cleaned = -0.00289387 Jy ! Component: 2000 - total flux cleaned = -0.00295554 Jy ! Component: 2050 - total flux cleaned = -0.00307712 Jy ! Component: 2100 - total flux cleaned = -0.00312221 Jy ! Component: 2150 - total flux cleaned = -0.00322591 Jy ! Component: 2200 - total flux cleaned = -0.00329916 Jy ! Component: 2250 - total flux cleaned = -0.00337155 Jy ! Component: 2300 - total flux cleaned = -0.00347194 Jy ! Component: 2350 - total flux cleaned = -0.00357082 Jy ! Component: 2400 - total flux cleaned = -0.00362671 Jy ! Component: 2450 - total flux cleaned = -0.00373761 Jy ! Component: 2500 - total flux cleaned = -0.00386067 Jy ! Component: 2550 - total flux cleaned = -0.00392838 Jy ! Component: 2600 - total flux cleaned = -0.0040357 Jy ! Component: 2650 - total flux cleaned = -0.0041287 Jy ! Component: 2700 - total flux cleaned = -0.00418131 Jy ! Component: 2750 - total flux cleaned = -0.00428551 Jy ! Component: 2800 - total flux cleaned = -0.00434988 Jy ! Component: 2850 - total flux cleaned = -0.00443916 Jy ! Component: 2900 - total flux cleaned = -0.00451494 Jy ! Component: 2950 - total flux cleaned = -0.00462764 Jy ! Component: 3000 - total flux cleaned = -0.00466479 Jy ! Component: 3050 - total flux cleaned = -0.004751 Jy ! Component: 3100 - total flux cleaned = -0.00484886 Jy ! Component: 3150 - total flux cleaned = -0.00493381 Jy ! Component: 3200 - total flux cleaned = -0.00499401 Jy ! Component: 3250 - total flux cleaned = -0.00505384 Jy ! Component: 3300 - total flux cleaned = -0.0051372 Jy ! Component: 3350 - total flux cleaned = -0.00523178 Jy ! Component: 3400 - total flux cleaned = -0.00531398 Jy ! Component: 3450 - total flux cleaned = -0.00538397 Jy ! Component: 3500 - total flux cleaned = -0.00544201 Jy ! Component: 3550 - total flux cleaned = -0.00551124 Jy ! Component: 3600 - total flux cleaned = -0.00561436 Jy ! Component: 3650 - total flux cleaned = -0.00563722 Jy ! Component: 3700 - total flux cleaned = -0.00569401 Jy ! Component: 3750 - total flux cleaned = -0.00575046 Jy ! Component: 3800 - total flux cleaned = -0.00578408 Jy ! Component: 3850 - total flux cleaned = -0.00580639 Jy ! Component: 3900 - total flux cleaned = -0.00585089 Jy ! Component: 3950 - total flux cleaned = -0.00588406 Jy ! Component: 4000 - total flux cleaned = -0.00597221 Jy ! Component: 4050 - total flux cleaned = -0.00600508 Jy ! Total flux subtracted in 4096 components = -0.00604885 Jy ! Clean residual min=-0.000635 max=0.000588 Jy/beam ! Clean residual mean=0.000002 rms=0.000208 Jy/beam ! Combined flux in latest and established models = 0.0602079 Jy keep ! Adding 291 model components to the UV plane model. ! The established model now contains 378 components and 0.0602079 Jy ![Exited script file: muppet] wmap "J0539-0514_S_2017_10_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 6.29 x 16.81 at -10.92 degrees (North through East) ! Clean map min=-0.0019487 max=0.058328 Jy/beam ! Writing clean map to FITS file: J0539-0514_S_2017_10_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0583281 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00020158 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.03679 1.03679 2.07358 4.14716 8.29432 16.5886 33.1773 66.3546 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.058 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 6.29 x 16.81 at -10.92 degrees (North through East) ! Clean map min=-0.0019487 max=0.058328 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0539-0514_S_2017_10_09_pus_uvs.log closed on Sun May 12 13:05:43 2019