! Started logfile: J0539-0514_S_2017_05_27_pus_uvs.log on Fri May 3 10:57:44 2019 obs J0539-0514_S_2017_05_27_pus_uva.fits ! Reading UV FITS file: J0539-0514_S_2017_05_27_pus_uva.fits ! AN table 1: 96 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.889815 visibilities/baseline/integration-bin. ! Found source: J0539-0514 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1211 lines of history. ! ! Reading 15376 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0539-0514_S_2017_05_27_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 57 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 90 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 69 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 538 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.982271Jy sigma=0.060497 ! Fit after self-cal, rms=0.952057Jy sigma=0.060425 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.256 mas, bmaj=6.277 mas, bpa=9.983 degrees ! Estimated noise=390.317 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0129384 Jy ! Component: 100 - total flux cleaned = 0.020201 Jy ! Total flux subtracted in 100 components = 0.020201 Jy ! Clean residual min=-0.005300 max=0.009577 Jy/beam ! Clean residual mean=0.000003 rms=0.001614 Jy/beam ! Combined flux in latest and established models = 0.020201 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.020201 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114305Jy sigma=0.000958 ! Fit after self-cal, rms=0.114071Jy sigma=0.000923 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.125 mas, bmaj=7.884 mas, bpa=8.908 degrees ! Estimated noise=361.914 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-3, 8.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0118587 Jy ! Component: 100 - total flux cleaned = 0.019521 Jy ! Component: 150 - total flux cleaned = 0.02468 Jy ! Component: 200 - total flux cleaned = 0.0284275 Jy ! Total flux subtracted in 200 components = 0.0284275 Jy ! Clean residual min=-0.004101 max=0.007565 Jy/beam ! Clean residual mean=0.000014 rms=0.001358 Jy/beam ! Combined flux in latest and established models = 0.0486285 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 24 components and 0.0486285 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109978Jy sigma=0.001036 ! Fit after self-cal, rms=0.109272Jy sigma=0.001026 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.40 FD 0.70 HN 0.82 KP 0.75 ! LA 0.78 MK 0.86 NL 0.70 OV 0.71 ! PT 0.88 SC 0.74 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 8.74 FD 0.79 HN 0.85 KP 0.82 ! LA 0.83 MK 0.86 NL 1.01 OV 0.87 ! PT 0.90 SC 0.80 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 6.24 FD 0.79 HN 0.91 KP 0.85 ! LA 1.00 MK 1.18 NL 0.97 OV 1.42 ! PT 0.85 SC 0.68 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.70 HN 0.77 KP 1.00* ! LA 0.67 MK 0.78 NL 1.00* OV 1.00* ! PT 0.83 SC 1.00* ! ! ! Fit before self-cal, rms=0.109272Jy sigma=0.001026 ! Fit after self-cal, rms=0.268336Jy sigma=0.000684 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.796 mas, bmaj=8.236 mas, bpa=0.1519 degrees ! Estimated noise=550.888 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00103299 Jy ! Component: 100 - total flux cleaned = 0.000556831 Jy ! Component: 150 - total flux cleaned = 0.000245394 Jy ! Component: 200 - total flux cleaned = 3.73249e-05 Jy ! Total flux subtracted in 200 components = 3.73249e-05 Jy ! Clean residual min=-0.002539 max=0.001958 Jy/beam ! Clean residual mean=-0.000006 rms=0.000534 Jy/beam ! Combined flux in latest and established models = 0.0486658 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 44 components and 0.0486658 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.267906Jy sigma=0.000684 ! Fit after self-cal, rms=0.267800Jy sigma=0.000670 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0021858 Jy ! Component: 100 - total flux cleaned = 0.00206401 Jy ! Component: 150 - total flux cleaned = 0.00222432 Jy ! Component: 200 - total flux cleaned = 0.00226114 Jy ! Total flux subtracted in 200 components = 0.00226114 Jy ! Clean residual min=-0.001968 max=0.002046 Jy/beam ! Clean residual mean=-0.000006 rms=0.000507 Jy/beam ! Combined flux in latest and established models = 0.0509269 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 64 components and 0.0509269 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.267494Jy sigma=0.000672 ! Fit after self-cal, rms=0.267527Jy sigma=0.000672 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.267527Jy sigma=0.000672 ! Fit after self-cal, rms=0.168836Jy sigma=0.000660 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.785 mas, bmaj=8.3 mas, bpa=-1.096 degrees ! Estimated noise=572.071 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000146445 Jy ! Component: 100 - total flux cleaned = 0.000105172 Jy ! Component: 150 - total flux cleaned = 0.000205787 Jy ! Component: 200 - total flux cleaned = 0.000292624 Jy ! Total flux subtracted in 200 components = 0.000292624 Jy ! Clean residual min=-0.001605 max=0.001627 Jy/beam ! Clean residual mean=-0.000002 rms=0.000401 Jy/beam ! Combined flux in latest and established models = 0.0512196 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 74 components and 0.0512196 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.168753Jy sigma=0.000660 ! Fit after self-cal, rms=0.168597Jy sigma=0.000658 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000361823 Jy ! Component: 100 - total flux cleaned = 0.000301512 Jy ! Component: 150 - total flux cleaned = 0.000276363 Jy ! Component: 200 - total flux cleaned = 0.000252661 Jy ! Total flux subtracted in 200 components = 0.000252661 Jy ! Clean residual min=-0.001676 max=0.001571 Jy/beam ! Clean residual mean=-0.000002 rms=0.000421 Jy/beam ! Combined flux in latest and established models = 0.0514722 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 84 components and 0.0514722 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.168528Jy sigma=0.000657 ! Fit after self-cal, rms=0.168529Jy sigma=0.000657 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.168529Jy sigma=0.000657 ! Fit after self-cal, rms=0.192052Jy sigma=0.000657 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.753 mas, bmaj=8.303 mas, bpa=-1.729 degrees ! Estimated noise=585.776 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000260959 Jy ! Component: 100 - total flux cleaned = 0.000293531 Jy ! Component: 150 - total flux cleaned = 0.000381773 Jy ! Component: 200 - total flux cleaned = 0.000434469 Jy ! Total flux subtracted in 200 components = 0.000434469 Jy ! Clean residual min=-0.001608 max=0.001388 Jy/beam ! Clean residual mean=-0.000001 rms=0.000401 Jy/beam ! Combined flux in latest and established models = 0.0519067 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 88 components and 0.0519067 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.191983Jy sigma=0.000656 ! Fit after self-cal, rms=0.191958Jy sigma=0.000656 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.07413e-05 Jy ! Component: 100 - total flux cleaned = 6.96332e-06 Jy ! Component: 150 - total flux cleaned = -1.5794e-05 Jy ! Component: 200 - total flux cleaned = -3.68454e-05 Jy ! Total flux subtracted in 200 components = -3.68454e-05 Jy ! Clean residual min=-0.001699 max=0.001435 Jy/beam ! Clean residual mean=-0.000001 rms=0.000405 Jy/beam ! Combined flux in latest and established models = 0.0518699 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 94 components and 0.0518699 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.191923Jy sigma=0.000656 ! Fit after self-cal, rms=0.191935Jy sigma=0.000656 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.191935Jy sigma=0.000656 ! Fit after self-cal, rms=0.202544Jy sigma=0.000656 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.675 mas, bmaj=12.94 mas, bpa=-2.748 degrees ! Estimated noise=714.995 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000722335 Jy ! Component: 100 - total flux cleaned = 0.000845962 Jy ! Component: 150 - total flux cleaned = 0.000846618 Jy ! Component: 200 - total flux cleaned = 0.000846676 Jy ! Total flux subtracted in 200 components = 0.000846676 Jy ! Clean residual min=-0.001560 max=0.001534 Jy/beam ! Clean residual mean=-0.000003 rms=0.000463 Jy/beam ! Combined flux in latest and established models = 0.0527165 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 106 components and 0.0527165 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.202492Jy sigma=0.000656 ! Fit after self-cal, rms=0.202485Jy sigma=0.000656 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.9888e-05 Jy ! Component: 100 - total flux cleaned = 3.7464e-05 Jy ! Component: 150 - total flux cleaned = 3.7053e-05 Jy ! Component: 200 - total flux cleaned = 2.38313e-05 Jy ! Total flux subtracted in 200 components = 2.38313e-05 Jy ! Clean residual min=-0.001547 max=0.001519 Jy/beam ! Clean residual mean=-0.000002 rms=0.000460 Jy/beam ! Combined flux in latest and established models = 0.0527404 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 115 components and 0.0527404 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.202469Jy sigma=0.000656 ! Fit after self-cal, rms=0.202466Jy sigma=0.000655 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.72 mas, bmaj=8.296 mas, bpa=-2.113 degrees ! Estimated noise=595.326 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.72 x 8.296 at -2.113 degrees (North through East) ! Clean map min=-0.0017566 max=0.034958 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.948 mas, bmaj=6.908 mas, bpa=-1.853 degrees ! Estimated noise=834.84 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0286719 Jy ! Component: 100 - total flux cleaned = 0.0374356 Jy ! Component: 150 - total flux cleaned = 0.0422797 Jy ! Component: 200 - total flux cleaned = 0.045394 Jy ! Total flux subtracted in 200 components = 0.045394 Jy ! Clean residual min=-0.002642 max=0.002465 Jy/beam ! Clean residual mean=-0.000001 rms=0.000645 Jy/beam ! Combined flux in latest and established models = 0.045394 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 33 model components to the UV plane model. ! The established model now contains 33 components and 0.045394 Jy ! Inverting map and beam ! Estimated beam: bmin=3.72 mas, bmaj=8.296 mas, bpa=-2.113 degrees ! Estimated noise=595.326 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00304782 Jy ! Component: 100 - total flux cleaned = 0.00396188 Jy ! Component: 150 - total flux cleaned = 0.00461128 Jy ! Component: 200 - total flux cleaned = 0.00512462 Jy ! Total flux subtracted in 200 components = 0.00512462 Jy ! Clean residual min=-0.001671 max=0.001738 Jy/beam ! Clean residual mean=-0.000001 rms=0.000418 Jy/beam ! Combined flux in latest and established models = 0.0505186 Jy ! Adding 31 model components to the UV plane model. ! The established model now contains 62 components and 0.0505186 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.675 mas, bmaj=12.94 mas, bpa=-2.748 degrees ! Estimated noise=714.995 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000720606 Jy ! Component: 100 - total flux cleaned = 0.000984038 Jy ! Component: 150 - total flux cleaned = 0.00115554 Jy ! Component: 200 - total flux cleaned = 0.00122522 Jy ! Total flux subtracted in 200 components = 0.00122522 Jy ! Clean residual min=-0.001662 max=0.001606 Jy/beam ! Clean residual mean=-0.000001 rms=0.000458 Jy/beam ! Combined flux in latest and established models = 0.0517438 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.59215e-05 Jy ! Component: 100 - total flux cleaned = 8.71823e-05 Jy ! Component: 150 - total flux cleaned = 0.000112176 Jy ! Component: 200 - total flux cleaned = 0.000146423 Jy ! Total flux subtracted in 200 components = 0.000146423 Jy ! Clean residual min=-0.001619 max=0.001571 Jy/beam ! Clean residual mean=-0.000001 rms=0.000454 Jy/beam ! Combined flux in latest and established models = 0.0518902 Jy ! Adding 60 model components to the UV plane model. ! The established model now contains 115 components and 0.0518902 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.72 mas, bmaj=8.296 mas, bpa=-2.113 degrees ! Estimated noise=595.326 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000122959 Jy ! Component: 100 - total flux cleaned = -0.000196887 Jy ! Component: 150 - total flux cleaned = -0.000240656 Jy ! Component: 200 - total flux cleaned = -0.000278894 Jy ! Total flux subtracted in 200 components = -0.000278894 Jy ! Clean residual min=-0.001687 max=0.001643 Jy/beam ! Clean residual mean=-0.000001 rms=0.000395 Jy/beam ! Combined flux in latest and established models = 0.0516114 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 131 components and 0.0516113 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.202361Jy sigma=0.000656 ! Fit after self-cal, rms=0.202408Jy sigma=0.000655 wmodel J0539-0514_S_2017_05_27_pus_map.mod ! Writing 131 model components to file: J0539-0514_S_2017_05_27_pus_map.mod wobs J0539-0514_S_2017_05_27_pus_uvs.fits ! Writing UV FITS file: J0539-0514_S_2017_05_27_pus_uvs.fits wwins J0539-0514_S_2017_05_27_pus_map.win ! wwins: Wrote 2 windows to J0539-0514_S_2017_05_27_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -1.27422e-05 Jy ! Component: 100 - total flux cleaned = -0.00019832 Jy ! Component: 150 - total flux cleaned = -0.000223412 Jy ! Component: 200 - total flux cleaned = -0.000223253 Jy ! Component: 250 - total flux cleaned = -0.000315993 Jy ! Component: 300 - total flux cleaned = -0.000405779 Jy ! Component: 350 - total flux cleaned = -0.000449743 Jy ! Component: 400 - total flux cleaned = -0.000535658 Jy ! Component: 450 - total flux cleaned = -0.00066212 Jy ! Component: 500 - total flux cleaned = -0.000764887 Jy ! Component: 550 - total flux cleaned = -0.000825452 Jy ! Component: 600 - total flux cleaned = -0.00088494 Jy ! Component: 650 - total flux cleaned = -0.000944179 Jy ! Component: 700 - total flux cleaned = -0.00104006 Jy ! Component: 750 - total flux cleaned = -0.00109644 Jy ! Component: 800 - total flux cleaned = -0.00118833 Jy ! Component: 850 - total flux cleaned = -0.00118784 Jy ! Component: 900 - total flux cleaned = -0.00124153 Jy ! Component: 950 - total flux cleaned = -0.00132944 Jy ! Component: 1000 - total flux cleaned = -0.00136411 Jy ! Component: 1050 - total flux cleaned = -0.00141506 Jy ! Component: 1100 - total flux cleaned = -0.00143187 Jy ! Component: 1150 - total flux cleaned = -0.00141588 Jy ! Component: 1200 - total flux cleaned = -0.00149736 Jy ! Component: 1250 - total flux cleaned = -0.00149741 Jy ! Component: 1300 - total flux cleaned = -0.00156111 Jy ! Component: 1350 - total flux cleaned = -0.00156104 Jy ! Component: 1400 - total flux cleaned = -0.00160754 Jy ! Component: 1450 - total flux cleaned = -0.00163802 Jy ! Component: 1500 - total flux cleaned = -0.00165332 Jy ! Component: 1550 - total flux cleaned = -0.00174282 Jy ! Component: 1600 - total flux cleaned = -0.00177226 Jy ! Component: 1650 - total flux cleaned = -0.00181605 Jy ! Component: 1700 - total flux cleaned = -0.00183045 Jy ! Component: 1750 - total flux cleaned = -0.00180231 Jy ! Component: 1800 - total flux cleaned = -0.00192895 Jy ! Component: 1850 - total flux cleaned = -0.00192901 Jy ! Component: 1900 - total flux cleaned = -0.00195668 Jy ! Component: 1950 - total flux cleaned = -0.00198405 Jy ! Component: 2000 - total flux cleaned = -0.00198427 Jy ! Component: 2050 - total flux cleaned = -0.00202411 Jy ! Component: 2100 - total flux cleaned = -0.00209031 Jy ! Component: 2150 - total flux cleaned = -0.00211648 Jy ! Component: 2200 - total flux cleaned = -0.00215561 Jy ! Component: 2250 - total flux cleaned = -0.00218127 Jy ! Component: 2300 - total flux cleaned = -0.00220705 Jy ! Component: 2350 - total flux cleaned = -0.00221991 Jy ! Component: 2400 - total flux cleaned = -0.00226988 Jy ! Component: 2450 - total flux cleaned = -0.00229445 Jy ! Component: 2500 - total flux cleaned = -0.00231869 Jy ! Component: 2550 - total flux cleaned = -0.00235491 Jy ! Component: 2600 - total flux cleaned = -0.00236676 Jy ! Component: 2650 - total flux cleaned = -0.00239053 Jy ! Component: 2700 - total flux cleaned = -0.00243755 Jy ! Component: 2750 - total flux cleaned = -0.00243775 Jy ! Component: 2800 - total flux cleaned = -0.0024149 Jy ! Component: 2850 - total flux cleaned = -0.00252989 Jy ! Component: 2900 - total flux cleaned = -0.00257541 Jy ! Component: 2950 - total flux cleaned = -0.00258657 Jy ! Component: 3000 - total flux cleaned = -0.00259789 Jy ! Component: 3050 - total flux cleaned = -0.00263127 Jy ! Component: 3100 - total flux cleaned = -0.00267551 Jy ! Component: 3150 - total flux cleaned = -0.00269753 Jy ! Component: 3200 - total flux cleaned = -0.00273015 Jy ! Component: 3250 - total flux cleaned = -0.00276249 Jy ! Component: 3300 - total flux cleaned = -0.00277324 Jy ! Component: 3350 - total flux cleaned = -0.00276257 Jy ! Component: 3400 - total flux cleaned = -0.00277309 Jy ! Component: 3450 - total flux cleaned = -0.00280464 Jy ! Component: 3500 - total flux cleaned = -0.00281492 Jy ! Component: 3550 - total flux cleaned = -0.00276343 Jy ! Component: 3600 - total flux cleaned = -0.0028046 Jy ! Component: 3650 - total flux cleaned = -0.0028554 Jy ! Component: 3700 - total flux cleaned = -0.00281489 Jy ! Component: 3750 - total flux cleaned = -0.00285512 Jy ! Component: 3800 - total flux cleaned = -0.00282518 Jy ! Component: 3850 - total flux cleaned = -0.00284508 Jy ! Component: 3900 - total flux cleaned = -0.00283524 Jy ! Component: 3950 - total flux cleaned = -0.00285484 Jy ! Component: 4000 - total flux cleaned = -0.00286454 Jy ! Component: 4050 - total flux cleaned = -0.0028742 Jy ! Total flux subtracted in 4096 components = -0.00283596 Jy ! Clean residual min=-0.000644 max=0.000559 Jy/beam ! Clean residual mean=0.000000 rms=0.000174 Jy/beam ! Combined flux in latest and established models = 0.0487754 Jy keep ! Adding 295 model components to the UV plane model. ! The established model now contains 426 components and 0.0487754 Jy ![Exited script file: muppet] wmap "J0539-0514_S_2017_05_27_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.72 x 8.296 at -2.113 degrees (North through East) ! Clean map min=-0.0021647 max=0.035924 Jy/beam ! Writing clean map to FITS file: J0539-0514_S_2017_05_27_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0359236 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000173381 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.44791 1.44791 2.89583 5.79166 11.5833 23.1666 46.3332 92.6665 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.035 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.72 x 8.296 at -2.113 degrees (North through East) ! Clean map min=-0.0021647 max=0.035924 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0539-0514_S_2017_05_27_pus_uvs.log closed on Fri May 3 10:57:50 2019