! Started logfile: J0539+1433_S_2017_09_26_pus_uvs.log on Sat May 11 12:55:05 2019 obs J0539+1433_S_2017_09_26_pus_uva.fits ! Reading UV FITS file: J0539+1433_S_2017_09_26_pus_uva.fits ! AN table 1: 25 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.622222 visibilities/baseline/integration-bin. ! Found source: J0539+1433 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 674 lines of history. ! ! Reading 2240 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0539+1433_S_2017_09_26_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 46 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 46 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 57 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 125 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.600672Jy sigma=0.005448 ! Fit after self-cal, rms=0.593470Jy sigma=0.005378 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.58 mas, bmaj=12.18 mas, bpa=-10.79 degrees ! Estimated noise=2508.47 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.321898 Jy ! Component: 100 - total flux cleaned = 0.392093 Jy ! Total flux subtracted in 100 components = 0.392093 Jy ! Clean residual min=-0.014582 max=0.020227 Jy/beam ! Clean residual mean=0.000105 rms=0.004375 Jy/beam ! Combined flux in latest and established models = 0.392093 Jy ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 0.392093 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097987Jy sigma=0.000797 ! Fit after self-cal, rms=0.097984Jy sigma=0.000797 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=5.594 mas, bmaj=12.37 mas, bpa=-11.67 degrees ! Estimated noise=1876.91 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0175834 Jy ! Component: 100 - total flux cleaned = 0.0245486 Jy ! Component: 150 - total flux cleaned = 0.0274125 Jy ! Component: 200 - total flux cleaned = 0.0277649 Jy ! Total flux subtracted in 200 components = 0.0277649 Jy ! Clean residual min=-0.008486 max=0.009529 Jy/beam ! Clean residual mean=0.000030 rms=0.002582 Jy/beam ! Combined flux in latest and established models = 0.419858 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 31 components and 0.419858 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094945Jy sigma=0.000768 ! Fit after self-cal, rms=0.094937Jy sigma=0.000768 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.00* HN 0.97 KP 1.05 ! LA 0.98 MK 1.09 NL 0.90 OV 0.99 ! PT 0.98 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.00* HN 1.01 KP 0.99 ! LA 0.97 MK 0.89 NL 1.07 OV 1.03 ! PT 0.96 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 1.00* HN 1.01 KP 1.00 ! LA 0.99 MK 1.00* NL 1.01 OV 0.97 ! PT 0.95 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.01 KP 1.00* ! LA 1.17 MK 1.05 NL 1.00* OV 1.14 ! PT 1.07 ! ! ! Fit before self-cal, rms=0.094937Jy sigma=0.000768 ! Fit after self-cal, rms=0.094818Jy sigma=0.000709 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=5.611 mas, bmaj=12.33 mas, bpa=-11.62 degrees ! Estimated noise=1874.48 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00300607 Jy ! Component: 100 - total flux cleaned = 0.00365234 Jy ! Component: 150 - total flux cleaned = 0.00376103 Jy ! Component: 200 - total flux cleaned = 0.00385698 Jy ! Total flux subtracted in 200 components = 0.00385698 Jy ! Clean residual min=-0.007749 max=0.008195 Jy/beam ! Clean residual mean=0.000022 rms=0.002311 Jy/beam ! Combined flux in latest and established models = 0.423715 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 42 components and 0.423715 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094719Jy sigma=0.000708 ! Fit after self-cal, rms=0.094727Jy sigma=0.000708 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094727Jy sigma=0.000708 ! Fit after self-cal, rms=0.084359Jy sigma=0.000636 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=5.617 mas, bmaj=12.31 mas, bpa=-11.49 degrees ! Estimated noise=1875.98 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00201162 Jy ! Component: 100 - total flux cleaned = 0.0025281 Jy ! Component: 150 - total flux cleaned = 0.00259953 Jy ! Component: 200 - total flux cleaned = 0.00266165 Jy ! Total flux subtracted in 200 components = 0.00266165 Jy ! Clean residual min=-0.005114 max=0.004598 Jy/beam ! Clean residual mean=-0.000013 rms=0.001219 Jy/beam ! Combined flux in latest and established models = 0.426377 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 53 components and 0.426377 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084310Jy sigma=0.000635 ! Fit after self-cal, rms=0.084477Jy sigma=0.000635 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000140327 Jy ! Component: 100 - total flux cleaned = 0.000211016 Jy ! Component: 150 - total flux cleaned = 0.000276466 Jy ! Component: 200 - total flux cleaned = 0.000335297 Jy ! Total flux subtracted in 200 components = 0.000335297 Jy ! Clean residual min=-0.005129 max=0.004555 Jy/beam ! Clean residual mean=-0.000012 rms=0.001214 Jy/beam ! Combined flux in latest and established models = 0.426712 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 64 components and 0.426712 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084464Jy sigma=0.000635 ! Fit after self-cal, rms=0.084463Jy sigma=0.000635 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084463Jy sigma=0.000635 ! Fit after self-cal, rms=0.084655Jy sigma=0.000635 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=5.617 mas, bmaj=12.28 mas, bpa=-11.41 degrees ! Estimated noise=1876.9 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00164237 Jy ! Component: 100 - total flux cleaned = 0.00191704 Jy ! Component: 150 - total flux cleaned = 0.00203004 Jy ! Component: 200 - total flux cleaned = 0.00210317 Jy ! Total flux subtracted in 200 components = 0.00210317 Jy ! Clean residual min=-0.004927 max=0.004327 Jy/beam ! Clean residual mean=-0.000012 rms=0.001176 Jy/beam ! Combined flux in latest and established models = 0.428815 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 68 components and 0.428815 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084624Jy sigma=0.000634 ! Fit after self-cal, rms=0.084625Jy sigma=0.000634 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.82046e-05 Jy ! Component: 100 - total flux cleaned = 0.000167825 Jy ! Component: 150 - total flux cleaned = 0.000257863 Jy ! Component: 200 - total flux cleaned = 0.000307467 Jy ! Total flux subtracted in 200 components = 0.000307467 Jy ! Clean residual min=-0.004938 max=0.004313 Jy/beam ! Clean residual mean=-0.000012 rms=0.001173 Jy/beam ! Combined flux in latest and established models = 0.429123 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 73 components and 0.429123 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084616Jy sigma=0.000634 ! Fit after self-cal, rms=0.084615Jy sigma=0.000634 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084615Jy sigma=0.000634 ! Fit after self-cal, rms=0.084697Jy sigma=0.000634 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.011 mas, bmaj=12.87 mas, bpa=-14.64 degrees ! Estimated noise=1993.61 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000825494 Jy ! Component: 100 - total flux cleaned = 0.00106471 Jy ! Component: 150 - total flux cleaned = 0.0012521 Jy ! Component: 200 - total flux cleaned = 0.00138449 Jy ! Total flux subtracted in 200 components = 0.00138449 Jy ! Clean residual min=-0.005322 max=0.004453 Jy/beam ! Clean residual mean=-0.000019 rms=0.001305 Jy/beam ! Combined flux in latest and established models = 0.430507 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 100 components and 0.430507 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084681Jy sigma=0.000634 ! Fit after self-cal, rms=0.084682Jy sigma=0.000634 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000115112 Jy ! Component: 100 - total flux cleaned = 0.000146628 Jy ! Component: 150 - total flux cleaned = 0.000173909 Jy ! Component: 200 - total flux cleaned = 0.000185985 Jy ! Total flux subtracted in 200 components = 0.000185985 Jy ! Clean residual min=-0.005286 max=0.004462 Jy/beam ! Clean residual mean=-0.000019 rms=0.001302 Jy/beam ! Combined flux in latest and established models = 0.430693 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 107 components and 0.430693 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084680Jy sigma=0.000634 ! Fit after self-cal, rms=0.084681Jy sigma=0.000634 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=5.616 mas, bmaj=12.26 mas, bpa=-11.35 degrees ! Estimated noise=1877.56 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.616 x 12.26 at -11.35 degrees (North through East) ! Clean map min=-0.0047586 max=0.41361 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.601 mas, bmaj=12.04 mas, bpa=-10.47 degrees ! Estimated noise=2520.22 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.323268 Jy ! Component: 100 - total flux cleaned = 0.393761 Jy ! Component: 150 - total flux cleaned = 0.411004 Jy ! Component: 200 - total flux cleaned = 0.418348 Jy ! Total flux subtracted in 200 components = 0.418348 Jy ! Clean residual min=-0.005573 max=0.005419 Jy/beam ! Clean residual mean=-0.000007 rms=0.001463 Jy/beam ! Combined flux in latest and established models = 0.418348 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.418348 Jy ! Inverting map and beam ! Estimated beam: bmin=5.616 mas, bmaj=12.26 mas, bpa=-11.35 degrees ! Estimated noise=1877.56 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00460788 Jy ! Component: 100 - total flux cleaned = 0.0074692 Jy ! Component: 150 - total flux cleaned = 0.0093391 Jy ! Component: 200 - total flux cleaned = 0.0105784 Jy ! Total flux subtracted in 200 components = 0.0105784 Jy ! Clean residual min=-0.004893 max=0.004326 Jy/beam ! Clean residual mean=-0.000013 rms=0.001164 Jy/beam ! Combined flux in latest and established models = 0.428927 Jy ! Adding 27 model components to the UV plane model. ! The established model now contains 42 components and 0.428927 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.011 mas, bmaj=12.87 mas, bpa=-14.64 degrees ! Estimated noise=1993.61 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000780856 Jy ! Component: 100 - total flux cleaned = 0.000940852 Jy ! Component: 150 - total flux cleaned = 0.00104241 Jy ! Component: 200 - total flux cleaned = 0.0011237 Jy ! Total flux subtracted in 200 components = 0.0011237 Jy ! Clean residual min=-0.005427 max=0.004517 Jy/beam ! Clean residual mean=-0.000020 rms=0.001316 Jy/beam ! Combined flux in latest and established models = 0.43005 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.40091e-05 Jy ! Component: 100 - total flux cleaned = 6.41855e-05 Jy ! Component: 150 - total flux cleaned = 9.07819e-05 Jy ! Component: 200 - total flux cleaned = 0.000114757 Jy ! Total flux subtracted in 200 components = 0.000114757 Jy ! Clean residual min=-0.005382 max=0.004524 Jy/beam ! Clean residual mean=-0.000019 rms=0.001313 Jy/beam ! Combined flux in latest and established models = 0.430165 Jy ! Adding 16 model components to the UV plane model. ! The established model now contains 55 components and 0.430165 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=5.616 mas, bmaj=12.26 mas, bpa=-11.35 degrees ! Estimated noise=1877.56 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000268468 Jy ! Component: 100 - total flux cleaned = -0.000171053 Jy ! Component: 150 - total flux cleaned = -0.000104771 Jy ! Component: 200 - total flux cleaned = -8.35881e-05 Jy ! Total flux subtracted in 200 components = -8.35881e-05 Jy ! Clean residual min=-0.004836 max=0.004250 Jy/beam ! Clean residual mean=-0.000012 rms=0.001146 Jy/beam ! Combined flux in latest and established models = 0.430082 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 70 components and 0.430082 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084661Jy sigma=0.000634 ! Fit after self-cal, rms=0.084654Jy sigma=0.000634 wmodel J0539+1433_S_2017_09_26_pus_map.mod ! Writing 70 model components to file: J0539+1433_S_2017_09_26_pus_map.mod wobs J0539+1433_S_2017_09_26_pus_uvs.fits ! Writing UV FITS file: J0539+1433_S_2017_09_26_pus_uvs.fits wwins J0539+1433_S_2017_09_26_pus_map.win ! wwins: Wrote 1 windows to J0539+1433_S_2017_09_26_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00113146 Jy ! Component: 100 - total flux cleaned = -0.00114334 Jy ! Component: 150 - total flux cleaned = -0.000827316 Jy ! Component: 200 - total flux cleaned = -0.000886394 Jy ! Component: 250 - total flux cleaned = -0.00104732 Jy ! Component: 300 - total flux cleaned = -0.00120131 Jy ! Component: 350 - total flux cleaned = -0.00110169 Jy ! Component: 400 - total flux cleaned = -0.0012914 Jy ! Component: 450 - total flux cleaned = -0.00138182 Jy ! Component: 500 - total flux cleaned = -0.00151429 Jy ! Component: 550 - total flux cleaned = -0.00155726 Jy ! Component: 600 - total flux cleaned = -0.00168212 Jy ! Component: 650 - total flux cleaned = -0.0017608 Jy ! Component: 700 - total flux cleaned = -0.00176016 Jy ! Component: 750 - total flux cleaned = -0.00176074 Jy ! Component: 800 - total flux cleaned = -0.00161466 Jy ! Component: 850 - total flux cleaned = -0.001579 Jy ! Component: 900 - total flux cleaned = -0.00140381 Jy ! Component: 950 - total flux cleaned = -0.00126729 Jy ! Component: 1000 - total flux cleaned = -0.00103406 Jy ! Component: 1050 - total flux cleaned = -0.000872071 Jy ! Component: 1100 - total flux cleaned = -0.000682721 Jy ! Component: 1150 - total flux cleaned = -0.000497613 Jy ! Component: 1200 - total flux cleaned = -0.000285709 Jy ! Component: 1250 - total flux cleaned = -1.92012e-05 Jy ! Component: 1300 - total flux cleaned = 0.000241709 Jy ! Component: 1350 - total flux cleaned = 0.000440588 Jy ! Component: 1400 - total flux cleaned = 0.000719005 Jy ! Component: 1450 - total flux cleaned = 0.000964445 Jy ! Component: 1500 - total flux cleaned = 0.00120621 Jy ! Component: 1550 - total flux cleaned = 0.00144383 Jy ! Component: 1600 - total flux cleaned = 0.00170327 Jy ! Component: 1650 - total flux cleaned = 0.00190732 Jy ! Component: 1700 - total flux cleaned = 0.00215861 Jy ! Component: 1750 - total flux cleaned = 0.00235622 Jy ! Component: 1800 - total flux cleaned = 0.0025266 Jy ! Component: 1850 - total flux cleaned = 0.0027422 Jy ! Component: 1900 - total flux cleaned = 0.00283669 Jy ! Component: 1950 - total flux cleaned = 0.00304675 Jy ! Component: 2000 - total flux cleaned = 0.00320804 Jy ! Component: 2050 - total flux cleaned = 0.0032989 Jy ! Component: 2100 - total flux cleaned = 0.00345624 Jy ! Component: 2150 - total flux cleaned = 0.00361202 Jy ! Component: 2200 - total flux cleaned = 0.00378798 Jy ! Component: 2250 - total flux cleaned = 0.00393991 Jy ! Component: 2300 - total flux cleaned = 0.00404723 Jy ! Component: 2350 - total flux cleaned = 0.00409005 Jy ! Component: 2400 - total flux cleaned = 0.00415338 Jy ! Component: 2450 - total flux cleaned = 0.00419507 Jy ! Component: 2500 - total flux cleaned = 0.00425693 Jy ! Component: 2550 - total flux cleaned = 0.00431849 Jy ! Component: 2600 - total flux cleaned = 0.00433887 Jy ! Component: 2650 - total flux cleaned = 0.00441929 Jy ! Component: 2700 - total flux cleaned = 0.00441934 Jy ! Component: 2750 - total flux cleaned = 0.0044788 Jy ! Component: 2800 - total flux cleaned = 0.00457683 Jy ! Component: 2850 - total flux cleaned = 0.00465461 Jy ! Component: 2900 - total flux cleaned = 0.00471237 Jy ! Component: 2950 - total flux cleaned = 0.00475058 Jy ! Component: 3000 - total flux cleaned = 0.00482665 Jy ! Component: 3050 - total flux cleaned = 0.00484549 Jy ! Component: 3100 - total flux cleaned = 0.00499524 Jy ! Component: 3150 - total flux cleaned = 0.00503235 Jy ! Component: 3200 - total flux cleaned = 0.00508776 Jy ! Component: 3250 - total flux cleaned = 0.00512455 Jy ! Component: 3300 - total flux cleaned = 0.00519732 Jy ! Component: 3350 - total flux cleaned = 0.00525154 Jy ! Component: 3400 - total flux cleaned = 0.00535911 Jy ! Component: 3450 - total flux cleaned = 0.00548345 Jy ! Component: 3500 - total flux cleaned = 0.00548345 Jy ! Component: 3550 - total flux cleaned = 0.00562387 Jy ! Component: 3600 - total flux cleaned = 0.00572827 Jy ! Component: 3650 - total flux cleaned = 0.00583204 Jy ! Component: 3700 - total flux cleaned = 0.00583191 Jy ! Component: 3750 - total flux cleaned = 0.00593427 Jy ! Component: 3800 - total flux cleaned = 0.00600203 Jy ! Component: 3850 - total flux cleaned = 0.00603597 Jy ! Component: 3900 - total flux cleaned = 0.00613648 Jy ! Component: 3950 - total flux cleaned = 0.0061699 Jy ! Component: 4000 - total flux cleaned = 0.00626923 Jy ! Component: 4050 - total flux cleaned = 0.00626926 Jy ! Total flux subtracted in 4096 components = 0.00635097 Jy ! Clean residual min=-0.001054 max=0.000978 Jy/beam ! Clean residual mean=-0.000003 rms=0.000310 Jy/beam ! Combined flux in latest and established models = 0.436433 Jy keep ! Adding 305 model components to the UV plane model. ! The established model now contains 375 components and 0.436433 Jy ![Exited script file: muppet] wmap "J0539+1433_S_2017_09_26_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.616 x 12.26 at -11.35 degrees (North through East) ! Clean map min=-0.0024398 max=0.41373 Jy/beam ! Writing clean map to FITS file: J0539+1433_S_2017_09_26_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.413731 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000304114 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.220516 0.220516 0.441032 0.882064 1.76413 3.52826 7.05652 14.113 28.2261 56.4521 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.413 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.616 x 12.26 at -11.35 degrees (North through East) ! Clean map min=-0.0024398 max=0.41373 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0539+1433_S_2017_09_26_pus_uvs.log closed on Sat May 11 12:55:09 2019