! Started logfile: J0538-4405_S_2017_06_10_pus_uvs.log on Mon May 6 14:45:59 2019 obs J0538-4405_S_2017_06_10_pus_uva.fits ! Reading UV FITS file: J0538-4405_S_2017_06_10_pus_uva.fits ! AN table 1: 12 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.301852 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0538-4405 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1154 lines of history. ! ! Reading 652 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0538-4405_S_2017_06_10_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 52 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 52 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 52 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 90 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=2.458522Jy sigma=0.015611 ! Fit after self-cal, rms=2.455799Jy sigma=0.015596 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.122 mas, bmaj=6.388 mas, bpa=-4.298 degrees ! Estimated noise=5818.34 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.48359 Jy ! Component: 100 - total flux cleaned = 3.12575 Jy ! Total flux subtracted in 100 components = 3.12575 Jy ! Clean residual min=-0.145771 max=0.281797 Jy/beam ! Clean residual mean=0.000011 rms=0.058959 Jy/beam ! Combined flux in latest and established models = 3.12575 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 3.12575 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.612822Jy sigma=0.003841 ! Fit after self-cal, rms=0.612599Jy sigma=0.003839 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.48 mas, bmaj=7.292 mas, bpa=-3.53 degrees ! Estimated noise=4905.27 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.423619 Jy ! Component: 100 - total flux cleaned = 0.626273 Jy ! Component: 150 - total flux cleaned = 0.731207 Jy ! Component: 200 - total flux cleaned = 0.788199 Jy ! Total flux subtracted in 200 components = 0.788199 Jy ! Clean residual min=-0.055962 max=0.084186 Jy/beam ! Clean residual mean=-0.000295 rms=0.023536 Jy/beam ! Combined flux in latest and established models = 3.91395 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 36 components and 3.91395 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.219624Jy sigma=0.001352 ! Fit after self-cal, rms=0.219477Jy sigma=0.001351 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00 HN 1.00* KP 1.00 ! LA 1.00* MK 1.01 NL 1.00* OV 0.99 ! PT 0.98 SC 0.97 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.05 HN 1.00* KP 0.96 ! LA 1.00* MK 1.00 NL 1.00* OV 1.03 ! PT 0.96 SC 1.03 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.07 HN 1.00* KP 0.94 ! LA 1.00* MK 1.03 NL 1.00* OV 0.93 ! PT 0.94 SC 1.03 ! ! ! Correcting IF 4. ! A total of 30 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.219477Jy sigma=0.001351 ! Fit after self-cal, rms=0.107341Jy sigma=0.000676 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.492 mas, bmaj=7.365 mas, bpa=-2.447 degrees ! Estimated noise=5074.14 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00526446 Jy ! Component: 100 - total flux cleaned = 0.0047871 Jy ! Component: 150 - total flux cleaned = 0.00419069 Jy ! Component: 200 - total flux cleaned = 0.00386134 Jy ! Total flux subtracted in 200 components = 0.00386134 Jy ! Clean residual min=-0.015747 max=0.023560 Jy/beam ! Clean residual mean=-0.000104 rms=0.005033 Jy/beam ! Combined flux in latest and established models = 3.91781 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 46 components and 3.91781 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106244Jy sigma=0.000670 ! Fit after self-cal, rms=0.106230Jy sigma=0.000670 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106230Jy sigma=0.000670 ! Fit after self-cal, rms=0.106046Jy sigma=0.000670 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.491 mas, bmaj=7.363 mas, bpa=-2.437 degrees ! Estimated noise=5070.14 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0024066 Jy ! Component: 100 - total flux cleaned = 0.00214687 Jy ! Component: 150 - total flux cleaned = 0.00192653 Jy ! Component: 200 - total flux cleaned = 0.00192505 Jy ! Total flux subtracted in 200 components = 0.00192505 Jy ! Clean residual min=-0.015748 max=0.022518 Jy/beam ! Clean residual mean=-0.000104 rms=0.004925 Jy/beam ! Combined flux in latest and established models = 3.91973 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 53 components and 3.91973 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105719Jy sigma=0.000668 ! Fit after self-cal, rms=0.105708Jy sigma=0.000668 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (13, 64). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0140314 Jy ! Component: 100 - total flux cleaned = 0.0159163 Jy ! Component: 150 - total flux cleaned = 0.0177283 Jy ! Component: 200 - total flux cleaned = 0.017731 Jy ! Total flux subtracted in 200 components = 0.017731 Jy ! Clean residual min=-0.014823 max=0.013151 Jy/beam ! Clean residual mean=-0.000055 rms=0.003520 Jy/beam ! Combined flux in latest and established models = 3.93746 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 66 components and 3.93746 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102687Jy sigma=0.000649 ! Fit after self-cal, rms=0.102628Jy sigma=0.000649 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102628Jy sigma=0.000649 ! Fit after self-cal, rms=0.102294Jy sigma=0.000647 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.49 mas, bmaj=7.362 mas, bpa=-2.433 degrees ! Estimated noise=5067.97 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00114807 Jy ! Component: 100 - total flux cleaned = 0.00165868 Jy ! Component: 150 - total flux cleaned = 0.00189793 Jy ! Component: 200 - total flux cleaned = 0.00203113 Jy ! Total flux subtracted in 200 components = 0.00203113 Jy ! Clean residual min=-0.012218 max=0.011522 Jy/beam ! Clean residual mean=-0.000040 rms=0.002882 Jy/beam ! Combined flux in latest and established models = 3.93949 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 77 components and 3.93949 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102025Jy sigma=0.000645 ! Fit after self-cal, rms=0.102012Jy sigma=0.000645 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000469983 Jy ! Component: 100 - total flux cleaned = -0.000469798 Jy ! Component: 150 - total flux cleaned = -0.000419905 Jy ! Component: 200 - total flux cleaned = -0.000276375 Jy ! Total flux subtracted in 200 components = -0.000276375 Jy ! Clean residual min=-0.012278 max=0.011231 Jy/beam ! Clean residual mean=-0.000041 rms=0.002838 Jy/beam ! Combined flux in latest and established models = 3.93922 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 89 components and 3.93922 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101965Jy sigma=0.000645 ! Fit after self-cal, rms=0.101964Jy sigma=0.000645 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101964Jy sigma=0.000645 ! Fit after self-cal, rms=0.101885Jy sigma=0.000645 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.917 mas, bmaj=26.3 mas, bpa=-2.092 degrees ! Estimated noise=7467.73 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000859751 Jy ! Component: 100 - total flux cleaned = 0.00091847 Jy ! Component: 150 - total flux cleaned = 0.00126073 Jy ! Component: 200 - total flux cleaned = 0.00141582 Jy ! Total flux subtracted in 200 components = 0.00141582 Jy ! Clean residual min=-0.008687 max=0.010728 Jy/beam ! Clean residual mean=-0.000080 rms=0.003377 Jy/beam ! Combined flux in latest and established models = 3.94063 Jy selfcal ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 94 components and 3.94063 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101869Jy sigma=0.000645 ! Fit after self-cal, rms=0.101859Jy sigma=0.000644 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000359282 Jy ! Component: 100 - total flux cleaned = -0.000358164 Jy ! Component: 150 - total flux cleaned = -0.000193986 Jy ! Component: 200 - total flux cleaned = -0.000117518 Jy ! Total flux subtracted in 200 components = -0.000117518 Jy ! Clean residual min=-0.008537 max=0.010327 Jy/beam ! Clean residual mean=-0.000083 rms=0.003265 Jy/beam ! Combined flux in latest and established models = 3.94052 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 98 components and 3.94052 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101854Jy sigma=0.000644 ! Fit after self-cal, rms=0.101849Jy sigma=0.000644 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.49 mas, bmaj=7.361 mas, bpa=-2.429 degrees ! Estimated noise=5067.08 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.49 x 7.361 at -2.429 degrees (North through East) ! Clean map min=-0.010521 max=3.3304 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101849Jy sigma=0.000644 ! Fit after self-cal, rms=0.087058Jy sigma=0.000549 ! Inverting map and beam ! Estimated beam: bmin=2.49 mas, bmaj=7.362 mas, bpa=-2.434 degrees ! Estimated noise=5067.03 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000831872 Jy ! Component: 100 - total flux cleaned = -0.000827609 Jy ! Component: 150 - total flux cleaned = -0.000773025 Jy ! Component: 200 - total flux cleaned = -0.000722424 Jy ! Total flux subtracted in 200 components = -0.000722424 Jy ! Clean residual min=-0.011292 max=0.010267 Jy/beam ! Clean residual mean=-0.000031 rms=0.002626 Jy/beam ! Combined flux in latest and established models = 3.93979 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 104 components and 3.93979 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086974Jy sigma=0.000548 ! Fit after self-cal, rms=0.086972Jy sigma=0.000548 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000349745 Jy ! Component: 100 - total flux cleaned = -0.0003021 Jy ! Component: 150 - total flux cleaned = -0.000207676 Jy ! Component: 200 - total flux cleaned = -0.000162745 Jy ! Total flux subtracted in 200 components = -0.000162745 Jy ! Clean residual min=-0.011359 max=0.010026 Jy/beam ! Clean residual mean=-0.000032 rms=0.002596 Jy/beam ! Combined flux in latest and established models = 3.93963 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 106 components and 3.93963 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086927Jy sigma=0.000548 ! Fit after self-cal, rms=0.086925Jy sigma=0.000548 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086925Jy sigma=0.000548 ! Fit after self-cal, rms=0.086899Jy sigma=0.000548 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.144 mas, bmaj=6.46 mas, bpa=-2.448 degrees ! Estimated noise=5954.99 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.48831 Jy ! Component: 100 - total flux cleaned = 3.12675 Jy ! Component: 150 - total flux cleaned = 3.42444 Jy ! Component: 200 - total flux cleaned = 3.59487 Jy ! Total flux subtracted in 200 components = 3.59487 Jy ! Clean residual min=-0.056417 max=0.085129 Jy/beam ! Clean residual mean=0.000002 rms=0.020063 Jy/beam ! Combined flux in latest and established models = 3.59487 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 3.59487 Jy ! Inverting map and beam ! Estimated beam: bmin=2.489 mas, bmaj=7.361 mas, bpa=-2.431 degrees ! Estimated noise=5066.37 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.15164 Jy ! Component: 100 - total flux cleaned = 0.232 Jy ! Component: 150 - total flux cleaned = 0.275757 Jy ! Component: 200 - total flux cleaned = 0.298381 Jy ! Total flux subtracted in 200 components = 0.298381 Jy ! Clean residual min=-0.016372 max=0.016590 Jy/beam ! Clean residual mean=-0.000056 rms=0.005196 Jy/beam ! Combined flux in latest and established models = 3.89325 Jy ! Adding 34 model components to the UV plane model. ! The established model now contains 45 components and 3.89325 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.916 mas, bmaj=26.29 mas, bpa=-2.101 degrees ! Estimated noise=7468.39 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0251377 Jy ! Component: 100 - total flux cleaned = 0.0351053 Jy ! Component: 150 - total flux cleaned = 0.0409656 Jy ! Component: 200 - total flux cleaned = 0.0444173 Jy ! Total flux subtracted in 200 components = 0.0444173 Jy ! Clean residual min=-0.007342 max=0.008905 Jy/beam ! Clean residual mean=-0.000083 rms=0.002975 Jy/beam ! Combined flux in latest and established models = 3.93767 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00134494 Jy ! Component: 100 - total flux cleaned = 0.00169506 Jy ! Component: 150 - total flux cleaned = 0.00188191 Jy ! Component: 200 - total flux cleaned = 0.00205329 Jy ! Total flux subtracted in 200 components = 0.00205329 Jy ! Clean residual min=-0.007150 max=0.008709 Jy/beam ! Clean residual mean=-0.000080 rms=0.002873 Jy/beam ! Combined flux in latest and established models = 3.93972 Jy ! Adding 20 model components to the UV plane model. ! The established model now contains 65 components and 3.93972 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.489 mas, bmaj=7.361 mas, bpa=-2.431 degrees ! Estimated noise=5066.37 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00138632 Jy ! Component: 100 - total flux cleaned = -0.00189845 Jy ! Component: 150 - total flux cleaned = -0.00246779 Jy ! Component: 200 - total flux cleaned = -0.00225622 Jy ! Total flux subtracted in 200 components = -0.00225622 Jy ! Clean residual min=-0.010768 max=0.010356 Jy/beam ! Clean residual mean=-0.000039 rms=0.002633 Jy/beam ! Combined flux in latest and established models = 3.93746 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 77 components and 3.93746 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087112Jy sigma=0.000549 ! Fit after self-cal, rms=0.087100Jy sigma=0.000549 wmodel J0538-4405_S_2017_06_10_pus_map.mod ! Writing 77 model components to file: J0538-4405_S_2017_06_10_pus_map.mod wobs J0538-4405_S_2017_06_10_pus_uvs.fits ! Writing UV FITS file: J0538-4405_S_2017_06_10_pus_uvs.fits wwins J0538-4405_S_2017_06_10_pus_map.win ! wwins: Wrote 2 windows to J0538-4405_S_2017_06_10_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000584342 Jy ! Component: 100 - total flux cleaned = -0.00249122 Jy ! Component: 150 - total flux cleaned = -0.00353093 Jy ! Component: 200 - total flux cleaned = -0.00424754 Jy ! Component: 250 - total flux cleaned = -0.00488882 Jy ! Component: 300 - total flux cleaned = -0.0052846 Jy ! Component: 350 - total flux cleaned = -0.0057539 Jy ! Component: 400 - total flux cleaned = -0.0062853 Jy ! Component: 450 - total flux cleaned = -0.00687335 Jy ! Component: 500 - total flux cleaned = -0.00758963 Jy ! Component: 550 - total flux cleaned = -0.00781379 Jy ! Component: 600 - total flux cleaned = -0.0080287 Jy ! Component: 650 - total flux cleaned = -0.0083072 Jy ! Component: 700 - total flux cleaned = -0.00871147 Jy ! Component: 750 - total flux cleaned = -0.00929523 Jy ! Component: 800 - total flux cleaned = -0.00985921 Jy ! Component: 850 - total flux cleaned = -0.0102233 Jy ! Component: 900 - total flux cleaned = -0.0106358 Jy ! Component: 950 - total flux cleaned = -0.0108657 Jy ! Component: 1000 - total flux cleaned = -0.0110902 Jy ! Component: 1050 - total flux cleaned = -0.0113111 Jy ! Component: 1100 - total flux cleaned = -0.0116314 Jy ! Component: 1150 - total flux cleaned = -0.0115256 Jy ! Component: 1200 - total flux cleaned = -0.0114219 Jy ! Component: 1250 - total flux cleaned = -0.0112683 Jy ! Component: 1300 - total flux cleaned = -0.011067 Jy ! Component: 1350 - total flux cleaned = -0.0109678 Jy ! Component: 1400 - total flux cleaned = -0.0108694 Jy ! Component: 1450 - total flux cleaned = -0.0106736 Jy ! Component: 1500 - total flux cleaned = -0.0104799 Jy ! Component: 1550 - total flux cleaned = -0.0102861 Jy ! Component: 1600 - total flux cleaned = -0.0100449 Jy ! Component: 1650 - total flux cleaned = -0.00980458 Jy ! Component: 1700 - total flux cleaned = -0.00956506 Jy ! Component: 1750 - total flux cleaned = -0.00937342 Jy ! Component: 1800 - total flux cleaned = -0.00903789 Jy ! Component: 1850 - total flux cleaned = -0.0087501 Jy ! Component: 1900 - total flux cleaned = -0.00836468 Jy ! Component: 1950 - total flux cleaned = -0.00807404 Jy ! Component: 2000 - total flux cleaned = -0.00778279 Jy ! Component: 2050 - total flux cleaned = -0.00739215 Jy ! Component: 2100 - total flux cleaned = -0.00699944 Jy ! Component: 2150 - total flux cleaned = -0.00665392 Jy ! Component: 2200 - total flux cleaned = -0.00630692 Jy ! Component: 2250 - total flux cleaned = -0.0060571 Jy ! Component: 2300 - total flux cleaned = -0.00575579 Jy ! Component: 2350 - total flux cleaned = -0.0054526 Jy ! Component: 2400 - total flux cleaned = -0.00514704 Jy ! Component: 2450 - total flux cleaned = -0.00478787 Jy ! Component: 2500 - total flux cleaned = -0.00452903 Jy ! Component: 2550 - total flux cleaned = -0.00426828 Jy ! Component: 2600 - total flux cleaned = -0.0040048 Jy ! Component: 2650 - total flux cleaned = -0.00363236 Jy ! Component: 2700 - total flux cleaned = -0.00341774 Jy ! Component: 2750 - total flux cleaned = -0.00298332 Jy ! Component: 2800 - total flux cleaned = -0.00259867 Jy ! Component: 2850 - total flux cleaned = -0.00226488 Jy ! Component: 2900 - total flux cleaned = -0.00192664 Jy ! Component: 2950 - total flux cleaned = -0.00169878 Jy ! Component: 3000 - total flux cleaned = -0.00129555 Jy ! Component: 3050 - total flux cleaned = -0.000944965 Jy ! Component: 3100 - total flux cleaned = -0.000589865 Jy ! Component: 3150 - total flux cleaned = -0.000169976 Jy ! Component: 3200 - total flux cleaned = 0.000133402 Jy ! Component: 3250 - total flux cleaned = 0.000441631 Jy ! Component: 3300 - total flux cleaned = 0.000691434 Jy ! Component: 3350 - total flux cleaned = 0.00075468 Jy ! Component: 3400 - total flux cleaned = 0.00101151 Jy ! Component: 3450 - total flux cleaned = 0.00114207 Jy ! Component: 3500 - total flux cleaned = 0.00127492 Jy ! Component: 3550 - total flux cleaned = 0.00134283 Jy ! Component: 3600 - total flux cleaned = 0.00141186 Jy ! Component: 3650 - total flux cleaned = 0.00162135 Jy ! Component: 3700 - total flux cleaned = 0.00162201 Jy ! Component: 3750 - total flux cleaned = 0.00183927 Jy ! Component: 3800 - total flux cleaned = 0.00183853 Jy ! Component: 3850 - total flux cleaned = 0.00198895 Jy ! Component: 3900 - total flux cleaned = 0.00206515 Jy ! Component: 3950 - total flux cleaned = 0.00214415 Jy ! Component: 4000 - total flux cleaned = 0.00214489 Jy ! Component: 4050 - total flux cleaned = 0.00222707 Jy ! Total flux subtracted in 4096 components = 0.00231022 Jy ! Clean residual min=-0.005601 max=0.004827 Jy/beam ! Clean residual mean=-0.000022 rms=0.001362 Jy/beam ! Combined flux in latest and established models = 3.93977 Jy keep ! Adding 185 model components to the UV plane model. ! The established model now contains 262 components and 3.93977 Jy ![Exited script file: muppet] wmap "J0538-4405_S_2017_06_10_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.489 x 7.361 at -2.431 degrees (North through East) ! Clean map min=-0.011065 max=3.3218 Jy/beam ! Writing clean map to FITS file: J0538-4405_S_2017_06_10_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 3.32179 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00151813 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.137106 0.137106 0.274212 0.548424 1.09685 2.1937 4.38739 8.77479 17.5496 35.0991 70.1983 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0045 print "peak=",int(1000*peak_flux)/1000 ! peak= 3.321 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.489 x 7.361 at -2.431 degrees (North through East) ! Clean map min=-0.011065 max=3.3218 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0538-4405_S_2017_06_10_pus_uvs.log closed on Mon May 6 14:46:04 2019