! Started logfile: J0536-3401_S_2017_10_21_pus_uvs.log on Sat May 11 20:51:46 2019 obs J0536-3401_S_2017_10_21_pus_uva.fits ! Reading UV FITS file: J0536-3401_S_2017_10_21_pus_uva.fits ! AN table 1: 13 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.538462 visibilities/baseline/integration-bin. ! Found source: J0536-3401 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 644 lines of history. ! ! Reading 1008 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0536-3401_S_2017_10_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 43 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 30 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 30 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 84 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.658140Jy sigma=0.005437 ! Fit after self-cal, rms=0.651000Jy sigma=0.005380 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.745 mas, bmaj=30.77 mas, bpa=-15.92 degrees ! Estimated noise=4139.31 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.261973 Jy ! Component: 100 - total flux cleaned = 0.323357 Jy ! Total flux subtracted in 100 components = 0.323357 Jy ! Clean residual min=-0.018181 max=0.027439 Jy/beam ! Clean residual mean=-0.000696 rms=0.006922 Jy/beam ! Combined flux in latest and established models = 0.323357 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 0.323357 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121300Jy sigma=0.000892 ! Fit after self-cal, rms=0.121282Jy sigma=0.000892 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.309 mas, bmaj=28.92 mas, bpa=-15.61 degrees ! Estimated noise=3279.7 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0415287 Jy ! Component: 100 - total flux cleaned = 0.0624224 Jy ! Component: 150 - total flux cleaned = 0.0750816 Jy ! Component: 200 - total flux cleaned = 0.0834841 Jy ! Total flux subtracted in 200 components = 0.0834841 Jy ! Clean residual min=-0.017841 max=0.014006 Jy/beam ! Clean residual mean=-0.000568 rms=0.004987 Jy/beam ! Combined flux in latest and established models = 0.406841 Jy ! Performing phase self-cal ! Adding 61 model components to the UV plane model. ! The established model now contains 81 components and 0.406841 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104690Jy sigma=0.000775 ! Fit after self-cal, rms=0.104625Jy sigma=0.000775 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.01 HN 1.00* KP 1.07 ! LA 0.94 MK 0.96 NL 1.00* OV 1.00 ! PT 1.00 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.10 HN 1.00* KP 1.03 ! LA 0.94 MK 1.04 NL 1.02 OV 0.99 ! PT 1.00 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.08 HN 1.00* KP 1.02 ! LA 0.75 MK 0.98 NL 1.21 OV 0.92 ! PT 0.96 ! ! ! Correcting IF 4. ! A total of 33 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* ! ! ! Fit before self-cal, rms=0.104625Jy sigma=0.000775 ! Fit after self-cal, rms=0.092700Jy sigma=0.000704 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.418 mas, bmaj=28.6 mas, bpa=-15.76 degrees ! Estimated noise=3370.05 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000792598 Jy ! Component: 100 - total flux cleaned = -0.000650345 Jy ! Component: 150 - total flux cleaned = -0.000646467 Jy ! Component: 200 - total flux cleaned = -0.000812991 Jy ! Total flux subtracted in 200 components = -0.000812991 Jy ! Clean residual min=-0.005458 max=0.006018 Jy/beam ! Clean residual mean=-0.000091 rms=0.001749 Jy/beam ! Combined flux in latest and established models = 0.406028 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 93 components and 0.406028 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092372Jy sigma=0.000701 ! Fit after self-cal, rms=0.092344Jy sigma=0.000701 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092344Jy sigma=0.000701 ! Fit after self-cal, rms=0.092351Jy sigma=0.000701 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.421 mas, bmaj=28.58 mas, bpa=-15.77 degrees ! Estimated noise=3366.84 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000317772 Jy ! Component: 100 - total flux cleaned = 0.00031436 Jy ! Component: 150 - total flux cleaned = 0.000139874 Jy ! Component: 200 - total flux cleaned = -1.18745e-05 Jy ! Total flux subtracted in 200 components = -1.18745e-05 Jy ! Clean residual min=-0.005616 max=0.005658 Jy/beam ! Clean residual mean=-0.000081 rms=0.001616 Jy/beam ! Combined flux in latest and established models = 0.406016 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 104 components and 0.406016 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092254Jy sigma=0.000700 ! Fit after self-cal, rms=0.092257Jy sigma=0.000700 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000103128 Jy ! Component: 100 - total flux cleaned = -5.89266e-05 Jy ! Component: 150 - total flux cleaned = -0.000163665 Jy ! Component: 200 - total flux cleaned = -0.000226018 Jy ! Total flux subtracted in 200 components = -0.000226018 Jy ! Clean residual min=-0.005747 max=0.005608 Jy/beam ! Clean residual mean=-0.000083 rms=0.001589 Jy/beam ! Combined flux in latest and established models = 0.40579 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 107 components and 0.40579 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092226Jy sigma=0.000700 ! Fit after self-cal, rms=0.092224Jy sigma=0.000700 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092224Jy sigma=0.000700 ! Fit after self-cal, rms=0.092255Jy sigma=0.000700 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.422 mas, bmaj=28.55 mas, bpa=-15.78 degrees ! Estimated noise=3363.38 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.10427e-05 Jy ! Component: 100 - total flux cleaned = -4.7323e-05 Jy ! Component: 150 - total flux cleaned = -0.00016725 Jy ! Component: 200 - total flux cleaned = -0.000247747 Jy ! Total flux subtracted in 200 components = -0.000247747 Jy ! Clean residual min=-0.005762 max=0.005574 Jy/beam ! Clean residual mean=-0.000079 rms=0.001553 Jy/beam ! Combined flux in latest and established models = 0.405543 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 120 components and 0.405543 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092230Jy sigma=0.000700 ! Fit after self-cal, rms=0.092234Jy sigma=0.000700 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000160344 Jy ! Component: 100 - total flux cleaned = -0.000208774 Jy ! Component: 150 - total flux cleaned = -0.000254104 Jy ! Component: 200 - total flux cleaned = -0.000341101 Jy ! Total flux subtracted in 200 components = -0.000341101 Jy ! Clean residual min=-0.005845 max=0.005542 Jy/beam ! Clean residual mean=-0.000082 rms=0.001542 Jy/beam ! Combined flux in latest and established models = 0.405202 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 125 components and 0.405201 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092222Jy sigma=0.000699 ! Fit after self-cal, rms=0.092221Jy sigma=0.000699 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092221Jy sigma=0.000699 ! Fit after self-cal, rms=0.092231Jy sigma=0.000699 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=10.04 mas, bmaj=38.61 mas, bpa=-1.304 degrees ! Estimated noise=4067.25 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000473187 Jy ! Component: 100 - total flux cleaned = -0.000522836 Jy ! Component: 150 - total flux cleaned = -0.0005712 Jy ! Component: 200 - total flux cleaned = -0.000617623 Jy ! Total flux subtracted in 200 components = -0.000617623 Jy ! Clean residual min=-0.004752 max=0.006174 Jy/beam ! Clean residual mean=-0.000133 rms=0.001917 Jy/beam ! Combined flux in latest and established models = 0.404584 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 135 components and 0.404584 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092219Jy sigma=0.000699 ! Fit after self-cal, rms=0.092222Jy sigma=0.000699 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.48372e-05 Jy ! Component: 100 - total flux cleaned = -6.64205e-05 Jy ! Component: 150 - total flux cleaned = -6.67085e-05 Jy ! Component: 200 - total flux cleaned = -6.69036e-05 Jy ! Total flux subtracted in 200 components = -6.69036e-05 Jy ! Clean residual min=-0.004800 max=0.006153 Jy/beam ! Clean residual mean=-0.000134 rms=0.001909 Jy/beam ! Combined flux in latest and established models = 0.404517 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 142 components and 0.404517 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092216Jy sigma=0.000699 ! Fit after self-cal, rms=0.092215Jy sigma=0.000699 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.423 mas, bmaj=28.54 mas, bpa=-15.78 degrees ! Estimated noise=3360.87 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.423 x 28.54 at -15.78 degrees (North through East) ! Clean map min=-0.0057953 max=0.31685 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.821 mas, bmaj=30.32 mas, bpa=-16.26 degrees ! Estimated noise=4293.81 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.26834 Jy ! Component: 100 - total flux cleaned = 0.330011 Jy ! Component: 150 - total flux cleaned = 0.354976 Jy ! Component: 200 - total flux cleaned = 0.369492 Jy ! Total flux subtracted in 200 components = 0.369492 Jy ! Clean residual min=-0.008109 max=0.008497 Jy/beam ! Clean residual mean=-0.000231 rms=0.002559 Jy/beam ! Combined flux in latest and established models = 0.369492 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 37 model components to the UV plane model. ! The established model now contains 37 components and 0.369492 Jy ! Inverting map and beam ! Estimated beam: bmin=3.423 mas, bmaj=28.54 mas, bpa=-15.78 degrees ! Estimated noise=3360.87 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0127486 Jy ! Component: 100 - total flux cleaned = 0.0199014 Jy ! Component: 150 - total flux cleaned = 0.0247531 Jy ! Component: 200 - total flux cleaned = 0.0282253 Jy ! Total flux subtracted in 200 components = 0.0282253 Jy ! Clean residual min=-0.005402 max=0.005927 Jy/beam ! Clean residual mean=-0.000139 rms=0.001698 Jy/beam ! Combined flux in latest and established models = 0.397718 Jy ! Adding 88 model components to the UV plane model. ! The established model now contains 122 components and 0.397718 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=10.04 mas, bmaj=38.61 mas, bpa=-1.304 degrees ! Estimated noise=4067.25 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00329436 Jy ! Component: 100 - total flux cleaned = 0.00429526 Jy ! Component: 150 - total flux cleaned = 0.00488575 Jy ! Component: 200 - total flux cleaned = 0.0053284 Jy ! Total flux subtracted in 200 components = 0.0053284 Jy ! Clean residual min=-0.004963 max=0.006197 Jy/beam ! Clean residual mean=-0.000158 rms=0.001985 Jy/beam ! Combined flux in latest and established models = 0.403046 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000375518 Jy ! Component: 100 - total flux cleaned = 0.000522686 Jy ! Component: 150 - total flux cleaned = 0.000659014 Jy ! Component: 200 - total flux cleaned = 0.000788238 Jy ! Total flux subtracted in 200 components = 0.000788238 Jy ! Clean residual min=-0.004687 max=0.006108 Jy/beam ! Clean residual mean=-0.000148 rms=0.001948 Jy/beam ! Combined flux in latest and established models = 0.403834 Jy ! Adding 64 model components to the UV plane model. ! The established model now contains 173 components and 0.403834 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.423 mas, bmaj=28.54 mas, bpa=-15.78 degrees ! Estimated noise=3360.87 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.42676e-05 Jy ! Component: 100 - total flux cleaned = 0.000315534 Jy ! Component: 150 - total flux cleaned = 0.000497562 Jy ! Component: 200 - total flux cleaned = 0.00053744 Jy ! Total flux subtracted in 200 components = 0.00053744 Jy ! Clean residual min=-0.005599 max=0.005600 Jy/beam ! Clean residual mean=-0.000087 rms=0.001535 Jy/beam ! Combined flux in latest and established models = 0.404372 Jy selfcal ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 200 components and 0.404372 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092234Jy sigma=0.000700 ! Fit after self-cal, rms=0.092222Jy sigma=0.000700 wmodel J0536-3401_S_2017_10_21_pus_map.mod ! Writing 200 model components to file: J0536-3401_S_2017_10_21_pus_map.mod wobs J0536-3401_S_2017_10_21_pus_uvs.fits ! Writing UV FITS file: J0536-3401_S_2017_10_21_pus_uvs.fits wwins J0536-3401_S_2017_10_21_pus_map.win ! wwins: Wrote 1 windows to J0536-3401_S_2017_10_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000105785 Jy ! Component: 100 - total flux cleaned = -0.000959227 Jy ! Component: 150 - total flux cleaned = -0.00169623 Jy ! Component: 200 - total flux cleaned = -0.00261946 Jy ! Component: 250 - total flux cleaned = -0.00330955 Jy ! Component: 300 - total flux cleaned = -0.00406483 Jy ! Component: 350 - total flux cleaned = -0.00488053 Jy ! Component: 400 - total flux cleaned = -0.0056542 Jy ! Component: 450 - total flux cleaned = -0.00629954 Jy ! Component: 500 - total flux cleaned = -0.00674167 Jy ! Component: 550 - total flux cleaned = -0.00725215 Jy ! Component: 600 - total flux cleaned = -0.00758459 Jy ! Component: 650 - total flux cleaned = -0.00778859 Jy ! Component: 700 - total flux cleaned = -0.00799015 Jy ! Component: 750 - total flux cleaned = -0.00810999 Jy ! Component: 800 - total flux cleaned = -0.00810997 Jy ! Component: 850 - total flux cleaned = -0.00815039 Jy ! Component: 900 - total flux cleaned = -0.00810958 Jy ! Component: 950 - total flux cleaned = -0.00815047 Jy ! Component: 1000 - total flux cleaned = -0.0081093 Jy ! Component: 1050 - total flux cleaned = -0.00810897 Jy ! Component: 1100 - total flux cleaned = -0.00810827 Jy ! Component: 1150 - total flux cleaned = -0.00802402 Jy ! Component: 1200 - total flux cleaned = -0.00806693 Jy ! Component: 1250 - total flux cleaned = -0.00806709 Jy ! Component: 1300 - total flux cleaned = -0.00811026 Jy ! Component: 1350 - total flux cleaned = -0.00811054 Jy ! Component: 1400 - total flux cleaned = -0.00797545 Jy ! Component: 1450 - total flux cleaned = -0.00783732 Jy ! Component: 1500 - total flux cleaned = -0.00774203 Jy ! Component: 1550 - total flux cleaned = -0.00764603 Jy ! Component: 1600 - total flux cleaned = -0.00749756 Jy ! Component: 1650 - total flux cleaned = -0.00739706 Jy ! Component: 1700 - total flux cleaned = -0.00723984 Jy ! Component: 1750 - total flux cleaned = -0.00723957 Jy ! Component: 1800 - total flux cleaned = -0.00707345 Jy ! Component: 1850 - total flux cleaned = -0.00701682 Jy ! Component: 1900 - total flux cleaned = -0.00684202 Jy ! Component: 1950 - total flux cleaned = -0.006661 Jy ! Component: 2000 - total flux cleaned = -0.00653685 Jy ! Component: 2050 - total flux cleaned = -0.00640876 Jy ! Component: 2100 - total flux cleaned = -0.0062122 Jy ! Component: 2150 - total flux cleaned = -0.00600783 Jy ! Component: 2200 - total flux cleaned = -0.0059377 Jy ! Component: 2250 - total flux cleaned = -0.005649 Jy ! Component: 2300 - total flux cleaned = -0.00564809 Jy ! Component: 2350 - total flux cleaned = -0.00549441 Jy ! Component: 2400 - total flux cleaned = -0.00541456 Jy ! Component: 2450 - total flux cleaned = -0.00533425 Jy ! Component: 2500 - total flux cleaned = -0.0051662 Jy ! Component: 2550 - total flux cleaned = -0.00490393 Jy ! Component: 2600 - total flux cleaned = -0.00472303 Jy ! Component: 2650 - total flux cleaned = -0.00453759 Jy ! Component: 2700 - total flux cleaned = -0.00424883 Jy ! Component: 2750 - total flux cleaned = -0.00414978 Jy ! Component: 2800 - total flux cleaned = -0.00394247 Jy ! Component: 2850 - total flux cleaned = -0.00372772 Jy ! Component: 2900 - total flux cleaned = -0.00361519 Jy ! Component: 2950 - total flux cleaned = -0.00338799 Jy ! Component: 3000 - total flux cleaned = -0.00338923 Jy ! Component: 3050 - total flux cleaned = -0.00302264 Jy ! Component: 3100 - total flux cleaned = -0.00289777 Jy ! Component: 3150 - total flux cleaned = -0.002901 Jy ! Component: 3200 - total flux cleaned = -0.00263218 Jy ! Component: 3250 - total flux cleaned = -0.00249419 Jy ! Component: 3300 - total flux cleaned = -0.00249246 Jy ! Component: 3350 - total flux cleaned = -0.00219538 Jy ! Component: 3400 - total flux cleaned = -0.00219324 Jy ! Component: 3450 - total flux cleaned = -0.00203144 Jy ! Component: 3500 - total flux cleaned = -0.00203116 Jy ! Component: 3550 - total flux cleaned = -0.00186057 Jy ! Component: 3600 - total flux cleaned = -0.00185791 Jy ! Component: 3650 - total flux cleaned = -0.00186271 Jy ! Component: 3700 - total flux cleaned = -0.00149026 Jy ! Component: 3750 - total flux cleaned = -0.00148944 Jy ! Component: 3800 - total flux cleaned = -0.00108518 Jy ! Component: 3850 - total flux cleaned = -0.00108394 Jy ! Component: 3900 - total flux cleaned = -0.00108675 Jy ! Component: 3950 - total flux cleaned = -0.000639723 Jy ! Component: 4000 - total flux cleaned = -0.00064177 Jy ! Component: 4050 - total flux cleaned = -0.000401182 Jy ! Total flux subtracted in 4096 components = -0.000151665 Jy ! Clean residual min=-0.014029 max=0.013913 Jy/beam ! Clean residual mean=0.000043 rms=0.003930 Jy/beam ! Combined flux in latest and established models = 0.40422 Jy keep ! Adding 129 model components to the UV plane model. ! The established model now contains 329 components and 0.40422 Jy ![Exited script file: muppet] wmap "J0536-3401_S_2017_10_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.423 x 28.54 at -15.78 degrees (North through East) ! Clean map min=-0.028359 max=0.33327 Jy/beam ! Writing clean map to FITS file: J0536-3401_S_2017_10_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.333268 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00446398 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -4.01837 4.01837 8.03674 16.0735 32.147 64.2939 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0133 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.333 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.423 x 28.54 at -15.78 degrees (North through East) ! Clean map min=-0.028359 max=0.33327 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0536-3401_S_2017_10_21_pus_uvs.log closed on Sat May 11 20:51:51 2019