! Started logfile: J0536-3401_S_2017_10_09_pus_uvs.log on Sun May 12 13:05:27 2019 obs J0536-3401_S_2017_10_09_pus_uva.fits ! Reading UV FITS file: J0536-3401_S_2017_10_09_pus_uva.fits ! AN table 1: 39 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.52849 visibilities/baseline/integration-bin. ! Found source: J0536-3401 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 496 lines of history. ! ! Reading 2968 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0536-3401_S_2017_10_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 95 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 140 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 130 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 258 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.693883Jy sigma=0.004675 ! Fit after self-cal, rms=0.678192Jy sigma=0.004566 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.693 mas, bmaj=20.52 mas, bpa=-13.43 degrees ! Estimated noise=3043.15 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.226399 Jy ! Component: 100 - total flux cleaned = 0.300831 Jy ! Total flux subtracted in 100 components = 0.300831 Jy ! Clean residual min=-0.020443 max=0.033476 Jy/beam ! Clean residual mean=-0.000295 rms=0.006859 Jy/beam ! Combined flux in latest and established models = 0.300831 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 22 components and 0.300831 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.154490Jy sigma=0.000934 ! Fit after self-cal, rms=0.154202Jy sigma=0.000933 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.303 mas, bmaj=25.55 mas, bpa=-13.94 degrees ! Estimated noise=2529.96 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0655211 Jy ! Component: 100 - total flux cleaned = 0.0993077 Jy ! Component: 150 - total flux cleaned = 0.118291 Jy ! Component: 200 - total flux cleaned = 0.1298 Jy ! Total flux subtracted in 200 components = 0.1298 Jy ! Clean residual min=-0.015593 max=0.010999 Jy/beam ! Clean residual mean=-0.000199 rms=0.003669 Jy/beam ! Combined flux in latest and established models = 0.430631 Jy ! Performing phase self-cal ! Adding 75 model components to the UV plane model. ! The established model now contains 97 components and 0.430631 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122766Jy sigma=0.000731 ! Fit after self-cal, rms=0.122212Jy sigma=0.000729 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.93 HN 1.83 KP 1.08 ! LA 1.03 MK 1.01 NL 0.89 OV 1.00* ! PT 1.00 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.98 HN 1.09 KP 0.99 ! LA 0.99 MK 0.99 NL 1.07 OV 1.00* ! PT 1.00 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00 HN 1.02 KP 0.89 ! LA 0.79 MK 1.02 NL 1.24 OV 1.00* ! PT 0.94 ! ! ! Correcting IF 4. ! A total of 93 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* ! ! ! Fit before self-cal, rms=0.122212Jy sigma=0.000729 ! Fit after self-cal, rms=0.118828Jy sigma=0.000670 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.434 mas, bmaj=27.18 mas, bpa=-14.38 degrees ! Estimated noise=2675.6 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00313723 Jy ! Component: 100 - total flux cleaned = -0.00359642 Jy ! Component: 150 - total flux cleaned = -0.00373317 Jy ! Component: 200 - total flux cleaned = -0.00398856 Jy ! Total flux subtracted in 200 components = -0.00398856 Jy ! Clean residual min=-0.010320 max=0.008028 Jy/beam ! Clean residual mean=0.000039 rms=0.002686 Jy/beam ! Combined flux in latest and established models = 0.426642 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 115 components and 0.426642 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118418Jy sigma=0.000668 ! Fit after self-cal, rms=0.118408Jy sigma=0.000668 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118408Jy sigma=0.000668 ! Fit after self-cal, rms=0.143580Jy sigma=0.000659 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.458 mas, bmaj=29.18 mas, bpa=-14.74 degrees ! Estimated noise=2703.21 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0010627 Jy ! Component: 100 - total flux cleaned = -0.00153388 Jy ! Component: 150 - total flux cleaned = -0.00166516 Jy ! Component: 200 - total flux cleaned = -0.00190935 Jy ! Total flux subtracted in 200 components = -0.00190935 Jy ! Clean residual min=-0.009667 max=0.007513 Jy/beam ! Clean residual mean=-0.000010 rms=0.002390 Jy/beam ! Combined flux in latest and established models = 0.424733 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 132 components and 0.424733 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.143227Jy sigma=0.000657 ! Fit after self-cal, rms=0.143659Jy sigma=0.000657 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000166457 Jy ! Component: 100 - total flux cleaned = -0.000157513 Jy ! Component: 150 - total flux cleaned = -0.000354456 Jy ! Component: 200 - total flux cleaned = -0.000629684 Jy ! Total flux subtracted in 200 components = -0.000629684 Jy ! Clean residual min=-0.009006 max=0.007006 Jy/beam ! Clean residual mean=-0.000012 rms=0.002325 Jy/beam ! Combined flux in latest and established models = 0.424103 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 139 components and 0.424103 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.143488Jy sigma=0.000656 ! Fit after self-cal, rms=0.143632Jy sigma=0.000656 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.143632Jy sigma=0.000656 ! Fit after self-cal, rms=0.151614Jy sigma=0.000653 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.458 mas, bmaj=29.67 mas, bpa=-14.79 degrees ! Estimated noise=2716.65 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000782971 Jy ! Component: 100 - total flux cleaned = -0.000916108 Jy ! Component: 150 - total flux cleaned = -0.00127476 Jy ! Component: 200 - total flux cleaned = -0.00149482 Jy ! Total flux subtracted in 200 components = -0.00149482 Jy ! Clean residual min=-0.008439 max=0.006911 Jy/beam ! Clean residual mean=-0.000015 rms=0.002192 Jy/beam ! Combined flux in latest and established models = 0.422608 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 151 components and 0.422608 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.151365Jy sigma=0.000652 ! Fit after self-cal, rms=0.151551Jy sigma=0.000652 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.63967e-05 Jy ! Component: 100 - total flux cleaned = -0.000280241 Jy ! Component: 150 - total flux cleaned = -0.000458148 Jy ! Component: 200 - total flux cleaned = -0.000705864 Jy ! Total flux subtracted in 200 components = -0.000705864 Jy ! Clean residual min=-0.008210 max=0.006452 Jy/beam ! Clean residual mean=-0.000019 rms=0.002145 Jy/beam ! Combined flux in latest and established models = 0.421902 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 158 components and 0.421902 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.151405Jy sigma=0.000651 ! Fit after self-cal, rms=0.151501Jy sigma=0.000651 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.151501Jy sigma=0.000651 ! Fit after self-cal, rms=0.158436Jy sigma=0.000649 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.689 mas, bmaj=34.47 mas, bpa=-7.142 degrees ! Estimated noise=3204.7 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000532885 Jy ! Component: 100 - total flux cleaned = -0.000537496 Jy ! Component: 150 - total flux cleaned = -0.000446104 Jy ! Component: 200 - total flux cleaned = -0.000441294 Jy ! Total flux subtracted in 200 components = -0.000441294 Jy ! Clean residual min=-0.008501 max=0.006613 Jy/beam ! Clean residual mean=-0.000021 rms=0.002352 Jy/beam ! Combined flux in latest and established models = 0.421461 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 165 components and 0.421461 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.158299Jy sigma=0.000649 ! Fit after self-cal, rms=0.158431Jy sigma=0.000649 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000160904 Jy ! Component: 100 - total flux cleaned = 8.33718e-05 Jy ! Component: 150 - total flux cleaned = 7.87199e-05 Jy ! Component: 200 - total flux cleaned = 7.50065e-05 Jy ! Total flux subtracted in 200 components = 7.50065e-05 Jy ! Clean residual min=-0.008477 max=0.006777 Jy/beam ! Clean residual mean=-0.000019 rms=0.002309 Jy/beam ! Combined flux in latest and established models = 0.421536 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 170 components and 0.421536 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.158358Jy sigma=0.000648 ! Fit after self-cal, rms=0.158429Jy sigma=0.000648 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.46 mas, bmaj=29.93 mas, bpa=-14.82 degrees ! Estimated noise=2721.32 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.46 x 29.93 at -14.82 degrees (North through East) ! Clean map min=-0.0079681 max=0.31548 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.733 mas, bmaj=25.08 mas, bpa=-14.81 degrees ! Estimated noise=3518.63 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.249224 Jy ! Component: 100 - total flux cleaned = 0.311228 Jy ! Component: 150 - total flux cleaned = 0.342408 Jy ! Component: 200 - total flux cleaned = 0.363362 Jy ! Total flux subtracted in 200 components = 0.363362 Jy ! Clean residual min=-0.011138 max=0.014880 Jy/beam ! Clean residual mean=-0.000161 rms=0.003310 Jy/beam ! Combined flux in latest and established models = 0.363362 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 60 model components to the UV plane model. ! The established model now contains 60 components and 0.363362 Jy ! Inverting map and beam ! Estimated beam: bmin=3.46 mas, bmaj=29.93 mas, bpa=-14.82 degrees ! Estimated noise=2721.32 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0235256 Jy ! Component: 100 - total flux cleaned = 0.0363938 Jy ! Component: 150 - total flux cleaned = 0.0441135 Jy ! Component: 200 - total flux cleaned = 0.0488698 Jy ! Total flux subtracted in 200 components = 0.0488698 Jy ! Clean residual min=-0.008576 max=0.007706 Jy/beam ! Clean residual mean=-0.000065 rms=0.002068 Jy/beam ! Combined flux in latest and established models = 0.412232 Jy ! Adding 55 model components to the UV plane model. ! The established model now contains 105 components and 0.412232 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.689 mas, bmaj=34.47 mas, bpa=-7.142 degrees ! Estimated noise=3204.7 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00438982 Jy ! Component: 100 - total flux cleaned = 0.00526743 Jy ! Component: 150 - total flux cleaned = 0.00577316 Jy ! Component: 200 - total flux cleaned = 0.00616143 Jy ! Total flux subtracted in 200 components = 0.00616143 Jy ! Clean residual min=-0.008305 max=0.006982 Jy/beam ! Clean residual mean=-0.000039 rms=0.002266 Jy/beam ! Combined flux in latest and established models = 0.418394 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000439578 Jy ! Component: 100 - total flux cleaned = 0.000848385 Jy ! Component: 150 - total flux cleaned = 0.001166 Jy ! Component: 200 - total flux cleaned = 0.00151991 Jy ! Total flux subtracted in 200 components = 0.00151991 Jy ! Clean residual min=-0.008324 max=0.006858 Jy/beam ! Clean residual mean=-0.000023 rms=0.002222 Jy/beam ! Combined flux in latest and established models = 0.419914 Jy ! Adding 11 model components to the UV plane model. ! The established model now contains 115 components and 0.419914 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.46 mas, bmaj=29.93 mas, bpa=-14.82 degrees ! Estimated noise=2721.32 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000119045 Jy ! Component: 100 - total flux cleaned = 7.09794e-05 Jy ! Component: 150 - total flux cleaned = 0.000243823 Jy ! Component: 200 - total flux cleaned = 0.000399769 Jy ! Total flux subtracted in 200 components = 0.000399769 Jy ! Clean residual min=-0.007764 max=0.006957 Jy/beam ! Clean residual mean=-0.000009 rms=0.001903 Jy/beam ! Combined flux in latest and established models = 0.420313 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 126 components and 0.420313 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.159970Jy sigma=0.000647 ! Fit after self-cal, rms=0.159537Jy sigma=0.000646 wmodel J0536-3401_S_2017_10_09_pus_map.mod ! Writing 126 model components to file: J0536-3401_S_2017_10_09_pus_map.mod wobs J0536-3401_S_2017_10_09_pus_uvs.fits ! Writing UV FITS file: J0536-3401_S_2017_10_09_pus_uvs.fits wwins J0536-3401_S_2017_10_09_pus_map.win ! wwins: Wrote 1 windows to J0536-3401_S_2017_10_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00261096 Jy ! Component: 100 - total flux cleaned = -0.0036389 Jy ! Component: 150 - total flux cleaned = -0.00395796 Jy ! Component: 200 - total flux cleaned = -0.00405912 Jy ! Component: 250 - total flux cleaned = -0.0039681 Jy ! Component: 300 - total flux cleaned = -0.0036155 Jy ! Component: 350 - total flux cleaned = -0.00309987 Jy ! Component: 400 - total flux cleaned = -0.00284778 Jy ! Component: 450 - total flux cleaned = -0.00260433 Jy ! Component: 500 - total flux cleaned = -0.00229026 Jy ! Component: 550 - total flux cleaned = -0.00198749 Jy ! Component: 600 - total flux cleaned = -0.00198604 Jy ! Component: 650 - total flux cleaned = -0.00184109 Jy ! Component: 700 - total flux cleaned = -0.00163053 Jy ! Component: 750 - total flux cleaned = -0.00149371 Jy ! Component: 800 - total flux cleaned = -0.00129357 Jy ! Component: 850 - total flux cleaned = -0.000965853 Jy ! Component: 900 - total flux cleaned = -0.00083663 Jy ! Component: 950 - total flux cleaned = -0.000521029 Jy ! Component: 1000 - total flux cleaned = -0.00027455 Jy ! Component: 1050 - total flux cleaned = -9.29813e-05 Jy ! Component: 1100 - total flux cleaned = 8.53566e-05 Jy ! Component: 1150 - total flux cleaned = 0.000201962 Jy ! Component: 1200 - total flux cleaned = 0.000201985 Jy ! Component: 1250 - total flux cleaned = 0.000257822 Jy ! Component: 1300 - total flux cleaned = 0.00014634 Jy ! Component: 1350 - total flux cleaned = 9.19707e-05 Jy ! Component: 1400 - total flux cleaned = 9.21037e-05 Jy ! Component: 1450 - total flux cleaned = 3.90235e-05 Jy ! Component: 1500 - total flux cleaned = 9.18736e-05 Jy ! Component: 1550 - total flux cleaned = 9.16822e-05 Jy ! Component: 1600 - total flux cleaned = 0.000244352 Jy ! Component: 1650 - total flux cleaned = 0.000193877 Jy ! Component: 1700 - total flux cleaned = 0.00024402 Jy ! Component: 1750 - total flux cleaned = 0.000488118 Jy ! Component: 1800 - total flux cleaned = 0.000487951 Jy ! Component: 1850 - total flux cleaned = 0.000631027 Jy ! Component: 1900 - total flux cleaned = 0.000678871 Jy ! Component: 1950 - total flux cleaned = 0.000865773 Jy ! Component: 2000 - total flux cleaned = 0.00082004 Jy ! Component: 2050 - total flux cleaned = 0.00100344 Jy ! Component: 2100 - total flux cleaned = 0.00122986 Jy ! Component: 2150 - total flux cleaned = 0.00127419 Jy ! Component: 2200 - total flux cleaned = 0.00136279 Jy ! Component: 2250 - total flux cleaned = 0.00162627 Jy ! Component: 2300 - total flux cleaned = 0.00175717 Jy ! Component: 2350 - total flux cleaned = 0.00192987 Jy ! Component: 2400 - total flux cleaned = 0.00210035 Jy ! Component: 2450 - total flux cleaned = 0.00239615 Jy ! Component: 2500 - total flux cleaned = 0.00260582 Jy ! Component: 2550 - total flux cleaned = 0.00293837 Jy ! Component: 2600 - total flux cleaned = 0.00314466 Jy ! Component: 2650 - total flux cleaned = 0.0033903 Jy ! Component: 2700 - total flux cleaned = 0.00379764 Jy ! Component: 2750 - total flux cleaned = 0.00424286 Jy ! Component: 2800 - total flux cleaned = 0.00476581 Jy ! Component: 2850 - total flux cleaned = 0.0052055 Jy ! Component: 2900 - total flux cleaned = 0.00560327 Jy ! Component: 2950 - total flux cleaned = 0.00603884 Jy ! Component: 3000 - total flux cleaned = 0.00635491 Jy ! Component: 3050 - total flux cleaned = 0.00678803 Jy ! Component: 3100 - total flux cleaned = 0.00710228 Jy ! Component: 3150 - total flux cleaned = 0.00749397 Jy ! Component: 3200 - total flux cleaned = 0.0077284 Jy ! Component: 3250 - total flux cleaned = 0.00800151 Jy ! Component: 3300 - total flux cleaned = 0.0084689 Jy ! Component: 3350 - total flux cleaned = 0.00878004 Jy ! Component: 3400 - total flux cleaned = 0.00901291 Jy ! Component: 3450 - total flux cleaned = 0.00936175 Jy ! Component: 3500 - total flux cleaned = 0.00959398 Jy ! Component: 3550 - total flux cleaned = 0.00998124 Jy ! Component: 3600 - total flux cleaned = 0.0102133 Jy ! Component: 3650 - total flux cleaned = 0.0104454 Jy ! Component: 3700 - total flux cleaned = 0.0106382 Jy ! Component: 3750 - total flux cleaned = 0.0109086 Jy ! Component: 3800 - total flux cleaned = 0.0111403 Jy ! Component: 3850 - total flux cleaned = 0.0113333 Jy ! Component: 3900 - total flux cleaned = 0.0116039 Jy ! Component: 3950 - total flux cleaned = 0.0118743 Jy ! Component: 4000 - total flux cleaned = 0.0120289 Jy ! Component: 4050 - total flux cleaned = 0.0121835 Jy ! Total flux subtracted in 4096 components = 0.0124543 Jy ! Clean residual min=-0.002621 max=0.002006 Jy/beam ! Clean residual mean=0.000014 rms=0.000722 Jy/beam ! Combined flux in latest and established models = 0.432768 Jy keep ! Adding 295 model components to the UV plane model. ! The established model now contains 421 components and 0.432767 Jy ![Exited script file: muppet] wmap "J0536-3401_S_2017_10_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.46 x 29.93 at -14.82 degrees (North through East) ! Clean map min=-0.0055735 max=0.32235 Jy/beam ! Writing clean map to FITS file: J0536-3401_S_2017_10_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.322348 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000718829 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.668994 0.668994 1.33799 2.67597 5.35195 10.7039 21.4078 42.8156 85.6312 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0021 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.322 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.46 x 29.93 at -14.82 degrees (North through East) ! Clean map min=-0.0055735 max=0.32235 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0536-3401_S_2017_10_09_pus_uvs.log closed on Sun May 12 13:05:32 2019