! Started logfile: J0536-3401_S_2017_08_05_pus_uvs.log on Thu May 9 19:21:55 2019 obs J0536-3401_S_2017_08_05_pus_uva.fits ! Reading UV FITS file: J0536-3401_S_2017_08_05_pus_uva.fits ! AN table 1: 13 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.437607 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0536-3401 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 513 lines of history. ! ! Reading 1024 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0536-3401_S_2017_08_05_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 42 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 42 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 42 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 130 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.644047Jy sigma=0.004343 ! Fit after self-cal, rms=0.626743Jy sigma=0.004204 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.288 mas, bmaj=20.21 mas, bpa=10.13 degrees ! Estimated noise=4327.34 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.294253 Jy ! Component: 100 - total flux cleaned = 0.359182 Jy ! Total flux subtracted in 100 components = 0.359182 Jy ! Clean residual min=-0.015961 max=0.021056 Jy/beam ! Clean residual mean=-0.000118 rms=0.005212 Jy/beam ! Combined flux in latest and established models = 0.359182 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.359182 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118937Jy sigma=0.000719 ! Fit after self-cal, rms=0.118939Jy sigma=0.000719 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.883 mas, bmaj=20.94 mas, bpa=9.306 degrees ! Estimated noise=3882.08 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.02211 Jy ! Component: 100 - total flux cleaned = 0.0316492 Jy ! Component: 150 - total flux cleaned = 0.036879 Jy ! Component: 200 - total flux cleaned = 0.0397515 Jy ! Total flux subtracted in 200 components = 0.0397515 Jy ! Clean residual min=-0.018350 max=0.013917 Jy/beam ! Clean residual mean=-0.000071 rms=0.004059 Jy/beam ! Combined flux in latest and established models = 0.398933 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 34 components and 0.398934 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114270Jy sigma=0.000698 ! Fit after self-cal, rms=0.114301Jy sigma=0.000698 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.01 HN 1.00* KP 1.00 ! LA 1.00 MK 1.00* NL 0.89 OV 1.00 ! PT 1.06 SC 0.96 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.03 HN 1.00* KP 1.00 ! LA 0.99 MK 1.00* NL 1.00 OV 1.08 ! PT 1.04 SC 1.03 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.04 HN 1.00* KP 0.91 ! LA 0.77 MK 1.00* NL 1.17 OV 0.94 ! PT 1.05 SC 1.01 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.114301Jy sigma=0.000698 ! Fit after self-cal, rms=0.101534Jy sigma=0.000654 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.885 mas, bmaj=21.05 mas, bpa=9.323 degrees ! Estimated noise=3874.74 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00102382 Jy ! Component: 100 - total flux cleaned = -0.0010866 Jy ! Component: 150 - total flux cleaned = -0.000980463 Jy ! Component: 200 - total flux cleaned = -0.000980254 Jy ! Total flux subtracted in 200 components = -0.000980254 Jy ! Clean residual min=-0.008994 max=0.008865 Jy/beam ! Clean residual mean=-0.000056 rms=0.002551 Jy/beam ! Combined flux in latest and established models = 0.397953 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 45 components and 0.397953 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101469Jy sigma=0.000654 ! Fit after self-cal, rms=0.101390Jy sigma=0.000653 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101390Jy sigma=0.000653 ! Fit after self-cal, rms=0.101410Jy sigma=0.000653 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.887 mas, bmaj=21.07 mas, bpa=9.32 degrees ! Estimated noise=3874.61 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000840583 Jy ! Component: 100 - total flux cleaned = -0.000794126 Jy ! Component: 150 - total flux cleaned = -0.000751598 Jy ! Component: 200 - total flux cleaned = -0.00071128 Jy ! Total flux subtracted in 200 components = -0.00071128 Jy ! Clean residual min=-0.009126 max=0.008738 Jy/beam ! Clean residual mean=-0.000055 rms=0.002522 Jy/beam ! Combined flux in latest and established models = 0.397242 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 51 components and 0.397242 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101372Jy sigma=0.000653 ! Fit after self-cal, rms=0.101374Jy sigma=0.000653 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.45875e-05 Jy ! Component: 100 - total flux cleaned = 4.44634e-05 Jy ! Component: 150 - total flux cleaned = 8.07754e-05 Jy ! Component: 200 - total flux cleaned = 7.98058e-05 Jy ! Total flux subtracted in 200 components = 7.98058e-05 Jy ! Clean residual min=-0.009173 max=0.008701 Jy/beam ! Clean residual mean=-0.000055 rms=0.002507 Jy/beam ! Combined flux in latest and established models = 0.397322 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 61 components and 0.397322 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101349Jy sigma=0.000653 ! Fit after self-cal, rms=0.101350Jy sigma=0.000653 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101350Jy sigma=0.000653 ! Fit after self-cal, rms=0.101325Jy sigma=0.000653 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.886 mas, bmaj=21.09 mas, bpa=9.321 degrees ! Estimated noise=3872.61 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000554617 Jy ! Component: 100 - total flux cleaned = -0.000554767 Jy ! Component: 150 - total flux cleaned = -0.000522878 Jy ! Component: 200 - total flux cleaned = -0.0005231 Jy ! Total flux subtracted in 200 components = -0.0005231 Jy ! Clean residual min=-0.009236 max=0.008609 Jy/beam ! Clean residual mean=-0.000053 rms=0.002490 Jy/beam ! Combined flux in latest and established models = 0.396799 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 72 components and 0.396799 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101303Jy sigma=0.000653 ! Fit after self-cal, rms=0.101303Jy sigma=0.000653 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.0692e-06 Jy ! Component: 100 - total flux cleaned = -1.95129e-06 Jy ! Component: 150 - total flux cleaned = -1.65337e-06 Jy ! Component: 200 - total flux cleaned = 2.63691e-05 Jy ! Total flux subtracted in 200 components = 2.63691e-05 Jy ! Clean residual min=-0.009258 max=0.008567 Jy/beam ! Clean residual mean=-0.000053 rms=0.002480 Jy/beam ! Combined flux in latest and established models = 0.396825 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 79 components and 0.396825 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101287Jy sigma=0.000653 ! Fit after self-cal, rms=0.101288Jy sigma=0.000653 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101288Jy sigma=0.000653 ! Fit after self-cal, rms=0.101249Jy sigma=0.000653 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.76 mas, bmaj=29.19 mas, bpa=-4.572 degrees ! Estimated noise=4532.16 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000579577 Jy ! Component: 100 - total flux cleaned = -0.000649614 Jy ! Component: 150 - total flux cleaned = -0.000717332 Jy ! Component: 200 - total flux cleaned = -0.0007817 Jy ! Total flux subtracted in 200 components = -0.0007817 Jy ! Clean residual min=-0.010930 max=0.008740 Jy/beam ! Clean residual mean=-0.000078 rms=0.003077 Jy/beam ! Combined flux in latest and established models = 0.396043 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 88 components and 0.396043 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101250Jy sigma=0.000653 ! Fit after self-cal, rms=0.101249Jy sigma=0.000653 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.81553e-05 Jy ! Component: 100 - total flux cleaned = -0.000110848 Jy ! Component: 150 - total flux cleaned = -0.00017123 Jy ! Component: 200 - total flux cleaned = -0.000211098 Jy ! Total flux subtracted in 200 components = -0.000211098 Jy ! Clean residual min=-0.010935 max=0.008729 Jy/beam ! Clean residual mean=-0.000078 rms=0.003070 Jy/beam ! Combined flux in latest and established models = 0.395832 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 90 components and 0.395832 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101250Jy sigma=0.000653 ! Fit after self-cal, rms=0.101249Jy sigma=0.000653 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.884 mas, bmaj=21.1 mas, bpa=9.326 degrees ! Estimated noise=3870 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.884 x 21.1 at 9.326 degrees (North through East) ! Clean map min=-0.0089301 max=0.37932 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.279 mas, bmaj=20.44 mas, bpa=10.09 degrees ! Estimated noise=4322.84 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.29393 Jy ! Component: 100 - total flux cleaned = 0.358189 Jy ! Component: 150 - total flux cleaned = 0.376664 Jy ! Component: 200 - total flux cleaned = 0.384899 Jy ! Total flux subtracted in 200 components = 0.384899 Jy ! Clean residual min=-0.007864 max=0.008855 Jy/beam ! Clean residual mean=-0.000056 rms=0.002620 Jy/beam ! Combined flux in latest and established models = 0.384899 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 37 model components to the UV plane model. ! The established model now contains 37 components and 0.384899 Jy ! Inverting map and beam ! Estimated beam: bmin=3.884 mas, bmaj=21.1 mas, bpa=9.326 degrees ! Estimated noise=3870 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00647087 Jy ! Component: 100 - total flux cleaned = 0.00991351 Jy ! Component: 150 - total flux cleaned = 0.0118734 Jy ! Component: 200 - total flux cleaned = 0.0121688 Jy ! Total flux subtracted in 200 components = 0.0121688 Jy ! Clean residual min=-0.009270 max=0.008814 Jy/beam ! Clean residual mean=-0.000051 rms=0.002554 Jy/beam ! Combined flux in latest and established models = 0.397068 Jy ! Adding 40 model components to the UV plane model. ! The established model now contains 74 components and 0.397068 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.76 mas, bmaj=29.19 mas, bpa=-4.572 degrees ! Estimated noise=4532.16 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000432579 Jy ! Component: 100 - total flux cleaned = 0.000427402 Jy ! Component: 150 - total flux cleaned = 0.000354537 Jy ! Component: 200 - total flux cleaned = 0.000232957 Jy ! Total flux subtracted in 200 components = 0.000232957 Jy ! Clean residual min=-0.011106 max=0.008639 Jy/beam ! Clean residual mean=-0.000076 rms=0.003102 Jy/beam ! Combined flux in latest and established models = 0.397301 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.06587e-05 Jy ! Component: 100 - total flux cleaned = -0.000176724 Jy ! Component: 150 - total flux cleaned = -0.000242205 Jy ! Component: 200 - total flux cleaned = -0.000284309 Jy ! Total flux subtracted in 200 components = -0.000284309 Jy ! Clean residual min=-0.011112 max=0.008624 Jy/beam ! Clean residual mean=-0.000076 rms=0.003092 Jy/beam ! Combined flux in latest and established models = 0.397017 Jy ! Adding 26 model components to the UV plane model. ! The established model now contains 99 components and 0.397017 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.884 mas, bmaj=21.1 mas, bpa=9.326 degrees ! Estimated noise=3870 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000772539 Jy ! Component: 100 - total flux cleaned = 0.000680294 Jy ! Component: 150 - total flux cleaned = 0.000636448 Jy ! Component: 200 - total flux cleaned = 0.000634083 Jy ! Total flux subtracted in 200 components = 0.000634083 Jy ! Clean residual min=-0.009402 max=0.008881 Jy/beam ! Clean residual mean=-0.000050 rms=0.002515 Jy/beam ! Combined flux in latest and established models = 0.397651 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 112 components and 0.397651 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101299Jy sigma=0.000653 ! Fit after self-cal, rms=0.101295Jy sigma=0.000653 wmodel J0536-3401_S_2017_08_05_pus_map.mod ! Writing 112 model components to file: J0536-3401_S_2017_08_05_pus_map.mod wobs J0536-3401_S_2017_08_05_pus_uvs.fits ! Writing UV FITS file: J0536-3401_S_2017_08_05_pus_uvs.fits wwins J0536-3401_S_2017_08_05_pus_map.win ! wwins: Wrote 1 windows to J0536-3401_S_2017_08_05_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000408152 Jy ! Component: 100 - total flux cleaned = 0.000897818 Jy ! Component: 150 - total flux cleaned = 0.00229342 Jy ! Component: 200 - total flux cleaned = 0.00333248 Jy ! Component: 250 - total flux cleaned = 0.00352378 Jy ! Component: 300 - total flux cleaned = 0.00343684 Jy ! Component: 350 - total flux cleaned = 0.00343758 Jy ! Component: 400 - total flux cleaned = 0.00336122 Jy ! Component: 450 - total flux cleaned = 0.00328826 Jy ! Component: 500 - total flux cleaned = 0.00348657 Jy ! Component: 550 - total flux cleaned = 0.00329733 Jy ! Component: 600 - total flux cleaned = 0.00329752 Jy ! Component: 650 - total flux cleaned = 0.00312893 Jy ! Component: 700 - total flux cleaned = 0.00302081 Jy ! Component: 750 - total flux cleaned = 0.00286264 Jy ! Component: 800 - total flux cleaned = 0.00255611 Jy ! Component: 850 - total flux cleaned = 0.00240794 Jy ! Component: 900 - total flux cleaned = 0.00226427 Jy ! Component: 950 - total flux cleaned = 0.00221855 Jy ! Component: 1000 - total flux cleaned = 0.00199337 Jy ! Component: 1050 - total flux cleaned = 0.00181739 Jy ! Component: 1100 - total flux cleaned = 0.00164498 Jy ! Component: 1150 - total flux cleaned = 0.00151889 Jy ! Component: 1200 - total flux cleaned = 0.00139576 Jy ! Component: 1250 - total flux cleaned = 0.00139609 Jy ! Component: 1300 - total flux cleaned = 0.00135576 Jy ! Component: 1350 - total flux cleaned = 0.00127703 Jy ! Component: 1400 - total flux cleaned = 0.00127624 Jy ! Component: 1450 - total flux cleaned = 0.00116263 Jy ! Component: 1500 - total flux cleaned = 0.0010146 Jy ! Component: 1550 - total flux cleaned = 0.00101447 Jy ! Component: 1600 - total flux cleaned = 0.000834482 Jy ! Component: 1650 - total flux cleaned = 0.000728119 Jy ! Component: 1700 - total flux cleaned = 0.000623223 Jy ! Component: 1750 - total flux cleaned = 0.000588668 Jy ! Component: 1800 - total flux cleaned = 0.000383174 Jy ! Component: 1850 - total flux cleaned = 0.000315208 Jy ! Component: 1900 - total flux cleaned = 0.000180327 Jy ! Component: 1950 - total flux cleaned = 1.30823e-05 Jy ! Component: 2000 - total flux cleaned = -0.000120109 Jy ! Component: 2050 - total flux cleaned = -0.000186549 Jy ! Component: 2100 - total flux cleaned = -0.00035219 Jy ! Component: 2150 - total flux cleaned = -0.000483771 Jy ! Component: 2200 - total flux cleaned = -0.00061479 Jy ! Component: 2250 - total flux cleaned = -0.000647744 Jy ! Component: 2300 - total flux cleaned = -0.000714049 Jy ! Component: 2350 - total flux cleaned = -0.000714005 Jy ! Component: 2400 - total flux cleaned = -0.000846939 Jy ! Component: 2450 - total flux cleaned = -0.000914442 Jy ! Component: 2500 - total flux cleaned = -0.000914799 Jy ! Component: 2550 - total flux cleaned = -0.000950276 Jy ! Component: 2600 - total flux cleaned = -0.000951107 Jy ! Component: 2650 - total flux cleaned = -0.000951376 Jy ! Component: 2700 - total flux cleaned = -0.00102576 Jy ! Component: 2750 - total flux cleaned = -0.00102701 Jy ! Component: 2800 - total flux cleaned = -0.0010656 Jy ! Component: 2850 - total flux cleaned = -0.00106584 Jy ! Component: 2900 - total flux cleaned = -0.00110586 Jy ! Component: 2950 - total flux cleaned = -0.00118687 Jy ! Component: 3000 - total flux cleaned = -0.00122744 Jy ! Component: 3050 - total flux cleaned = -0.00127036 Jy ! Component: 3100 - total flux cleaned = -0.00131425 Jy ! Component: 3150 - total flux cleaned = -0.00131526 Jy ! Component: 3200 - total flux cleaned = -0.00126916 Jy ! Component: 3250 - total flux cleaned = -0.00126875 Jy ! Component: 3300 - total flux cleaned = -0.00122118 Jy ! Component: 3350 - total flux cleaned = -0.00117151 Jy ! Component: 3400 - total flux cleaned = -0.00117145 Jy ! Component: 3450 - total flux cleaned = -0.00111974 Jy ! Component: 3500 - total flux cleaned = -0.00106553 Jy ! Component: 3550 - total flux cleaned = -0.00101171 Jy ! Component: 3600 - total flux cleaned = -0.000899205 Jy ! Component: 3650 - total flux cleaned = -0.000899567 Jy ! Component: 3700 - total flux cleaned = -0.0009003 Jy ! Component: 3750 - total flux cleaned = -0.000658903 Jy ! Component: 3800 - total flux cleaned = -0.00059613 Jy ! Component: 3850 - total flux cleaned = -0.000595416 Jy ! Component: 3900 - total flux cleaned = -0.000465875 Jy ! Component: 3950 - total flux cleaned = -0.000397372 Jy ! Component: 4000 - total flux cleaned = -0.000330604 Jy ! Component: 4050 - total flux cleaned = -0.000260794 Jy ! Total flux subtracted in 4096 components = -0.00011798 Jy ! Clean residual min=-0.004261 max=0.004604 Jy/beam ! Clean residual mean=-0.000026 rms=0.001152 Jy/beam ! Combined flux in latest and established models = 0.397533 Jy keep ! Adding 182 model components to the UV plane model. ! The established model now contains 294 components and 0.397533 Jy ![Exited script file: muppet] wmap "J0536-3401_S_2017_08_05_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.884 x 21.1 at 9.326 degrees (North through East) ! Clean map min=-0.0084659 max=0.37547 Jy/beam ! Writing clean map to FITS file: J0536-3401_S_2017_08_05_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.375473 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00117194 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.936374 0.936374 1.87275 3.7455 7.49099 14.982 29.964 59.9279 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0035 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.375 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.884 x 21.1 at 9.326 degrees (North through East) ! Clean map min=-0.0084659 max=0.37547 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0536-3401_S_2017_08_05_pus_uvs.log closed on Thu May 9 19:22:00 2019