! Started logfile: J0536-3401_S_2017_07_09_pus_uvs.log on Wed May 8 14:42:57 2019 obs J0536-3401_S_2017_07_09_pus_uva.fits ! Reading UV FITS file: J0536-3401_S_2017_07_09_pus_uva.fits ! AN table 1: 26 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.591453 visibilities/baseline/integration-bin. ! Found source: J0536-3401 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 594 lines of history. ! ! Reading 2768 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0536-3401_S_2017_07_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 84 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 58 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 58 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 164 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.729446Jy sigma=0.005100 ! Fit after self-cal, rms=0.690874Jy sigma=0.004816 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.395 mas, bmaj=6.409 mas, bpa=-10.93 degrees ! Estimated noise=2629.95 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.242594 Jy ! Component: 100 - total flux cleaned = 0.334321 Jy ! Total flux subtracted in 100 components = 0.334321 Jy ! Clean residual min=-0.017271 max=0.042704 Jy/beam ! Clean residual mean=-0.000280 rms=0.005853 Jy/beam ! Combined flux in latest and established models = 0.334321 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.334321 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120681Jy sigma=0.000819 ! Fit after self-cal, rms=0.120433Jy sigma=0.000817 ! Inverting map ! Added new window around map position (3, -8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0412094 Jy ! Component: 100 - total flux cleaned = 0.0513194 Jy ! Total flux subtracted in 100 components = 0.0513194 Jy ! Clean residual min=-0.012899 max=0.025760 Jy/beam ! Clean residual mean=-0.000107 rms=0.003779 Jy/beam ! Combined flux in latest and established models = 0.38564 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 15 components and 0.38564 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107386Jy sigma=0.000714 ! Fit after self-cal, rms=0.107075Jy sigma=0.000711 ! Inverting map ! Added new window around map position (-4, -21.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0137945 Jy ! Component: 100 - total flux cleaned = 0.0155126 Jy ! Total flux subtracted in 100 components = 0.0155126 Jy ! Clean residual min=-0.010713 max=0.017668 Jy/beam ! Clean residual mean=-0.000059 rms=0.003013 Jy/beam ! Combined flux in latest and established models = 0.401153 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 25 components and 0.401153 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104212Jy sigma=0.000690 ! Fit after self-cal, rms=0.103882Jy sigma=0.000687 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.919 mas, bmaj=7.327 mas, bpa=-8.972 degrees ! Estimated noise=2270.25 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (18, -98.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0130491 Jy ! Component: 100 - total flux cleaned = 0.0171655 Jy ! Component: 150 - total flux cleaned = 0.0177776 Jy ! Component: 200 - total flux cleaned = 0.0184571 Jy ! Total flux subtracted in 200 components = 0.0184571 Jy ! Clean residual min=-0.007856 max=0.009057 Jy/beam ! Clean residual mean=-0.000049 rms=0.002264 Jy/beam ! Combined flux in latest and established models = 0.41961 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 44 components and 0.41961 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102006Jy sigma=0.000675 ! Fit after self-cal, rms=0.101855Jy sigma=0.000674 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.97 HN 1.00* KP 1.00 ! LA 0.98 MK 0.99 NL 1.00* OV 0.99 ! PT 1.01 SC 0.94 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.03 HN 1.00* KP 0.97 ! LA 0.97 MK 1.00 NL 1.19 OV 1.03 ! PT 0.99 SC 1.05 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.05 HN 1.00* KP 0.98 ! LA 0.98 MK 0.99 NL 1.13 OV 0.93 ! PT 0.96 SC 1.00 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.10 HN 1.00* KP 1.00* ! LA 0.92 MK 0.84 NL 1.00* OV 1.00* ! PT 1.02 SC 1.00* ! ! ! Fit before self-cal, rms=0.101855Jy sigma=0.000674 ! Fit after self-cal, rms=0.101033Jy sigma=0.000655 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.907 mas, bmaj=7.298 mas, bpa=-9.149 degrees ! Estimated noise=2266.7 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00250913 Jy ! Component: 100 - total flux cleaned = -0.00223452 Jy ! Component: 150 - total flux cleaned = -0.00211785 Jy ! Component: 200 - total flux cleaned = -0.0020155 Jy ! Total flux subtracted in 200 components = -0.0020155 Jy ! Clean residual min=-0.006601 max=0.007553 Jy/beam ! Clean residual mean=0.000042 rms=0.001745 Jy/beam ! Combined flux in latest and established models = 0.417595 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 62 components and 0.417595 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100633Jy sigma=0.000653 ! Fit after self-cal, rms=0.100666Jy sigma=0.000653 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100666Jy sigma=0.000653 ! Fit after self-cal, rms=0.100861Jy sigma=0.000646 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.92 mas, bmaj=7.346 mas, bpa=-8.721 degrees ! Estimated noise=2283.23 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00175395 Jy ! Component: 100 - total flux cleaned = -0.00209233 Jy ! Component: 150 - total flux cleaned = -0.00231795 Jy ! Component: 200 - total flux cleaned = -0.00231666 Jy ! Total flux subtracted in 200 components = -0.00231666 Jy ! Clean residual min=-0.005704 max=0.007152 Jy/beam ! Clean residual mean=0.000038 rms=0.001466 Jy/beam ! Combined flux in latest and established models = 0.415278 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 80 components and 0.415278 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100713Jy sigma=0.000645 ! Fit after self-cal, rms=0.100711Jy sigma=0.000645 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-46.5, -75.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00465523 Jy ! Component: 100 - total flux cleaned = 0.00548035 Jy ! Component: 150 - total flux cleaned = 0.00659093 Jy ! Component: 200 - total flux cleaned = 0.00757276 Jy ! Total flux subtracted in 200 components = 0.00757276 Jy ! Clean residual min=-0.005110 max=0.005092 Jy/beam ! Clean residual mean=0.000011 rms=0.001264 Jy/beam ! Combined flux in latest and established models = 0.422851 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 97 components and 0.422851 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100268Jy sigma=0.000642 ! Fit after self-cal, rms=0.100216Jy sigma=0.000641 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100216Jy sigma=0.000641 ! Fit after self-cal, rms=0.101596Jy sigma=0.000641 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.931 mas, bmaj=7.375 mas, bpa=-8.558 degrees ! Estimated noise=2290.13 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000795668 Jy ! Component: 100 - total flux cleaned = 0.000628683 Jy ! Component: 150 - total flux cleaned = 0.000624726 Jy ! Component: 200 - total flux cleaned = 0.000686744 Jy ! Total flux subtracted in 200 components = 0.000686744 Jy ! Clean residual min=-0.004770 max=0.005067 Jy/beam ! Clean residual mean=0.000015 rms=0.001209 Jy/beam ! Combined flux in latest and established models = 0.423537 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 112 components and 0.423537 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101467Jy sigma=0.000640 ! Fit after self-cal, rms=0.101464Jy sigma=0.000640 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000214057 Jy ! Component: 100 - total flux cleaned = 0.000214129 Jy ! Component: 150 - total flux cleaned = 0.000322011 Jy ! Component: 200 - total flux cleaned = 0.000320425 Jy ! Total flux subtracted in 200 components = 0.000320425 Jy ! Clean residual min=-0.004707 max=0.005055 Jy/beam ! Clean residual mean=0.000013 rms=0.001194 Jy/beam ! Combined flux in latest and established models = 0.423858 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 119 components and 0.423858 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101392Jy sigma=0.000640 ! Fit after self-cal, rms=0.101389Jy sigma=0.000640 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101389Jy sigma=0.000640 ! Fit after self-cal, rms=0.101290Jy sigma=0.000639 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.298 mas, bmaj=24.13 mas, bpa=-5.261 degrees ! Estimated noise=3053.07 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000174675 Jy ! Component: 100 - total flux cleaned = 0.000220983 Jy ! Component: 150 - total flux cleaned = 0.00026525 Jy ! Component: 200 - total flux cleaned = 0.000264145 Jy ! Total flux subtracted in 200 components = 0.000264145 Jy ! Clean residual min=-0.004777 max=0.004780 Jy/beam ! Clean residual mean=0.000035 rms=0.001555 Jy/beam ! Combined flux in latest and established models = 0.424122 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 123 components and 0.424122 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101275Jy sigma=0.000639 ! Fit after self-cal, rms=0.101276Jy sigma=0.000639 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.03294e-05 Jy ! Component: 100 - total flux cleaned = 2.68661e-05 Jy ! Component: 150 - total flux cleaned = 2.77842e-05 Jy ! Component: 200 - total flux cleaned = 2.79598e-05 Jy ! Total flux subtracted in 200 components = 2.79598e-05 Jy ! Clean residual min=-0.004740 max=0.004766 Jy/beam ! Clean residual mean=0.000030 rms=0.001526 Jy/beam ! Combined flux in latest and established models = 0.42415 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 125 components and 0.42415 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101268Jy sigma=0.000639 ! Fit after self-cal, rms=0.101266Jy sigma=0.000639 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.931 mas, bmaj=7.378 mas, bpa=-8.64 degrees ! Estimated noise=2287.18 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.931 x 7.378 at -8.64 degrees (North through East) ! Clean map min=-0.0096548 max=0.30003 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.409 mas, bmaj=6.421 mas, bpa=-10.54 degrees ! Estimated noise=2668.55 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.24484 Jy ! Component: 100 - total flux cleaned = 0.337644 Jy ! Component: 150 - total flux cleaned = 0.379822 Jy ! Component: 200 - total flux cleaned = 0.39988 Jy ! Total flux subtracted in 200 components = 0.39988 Jy ! Clean residual min=-0.010835 max=0.015587 Jy/beam ! Clean residual mean=0.000007 rms=0.002701 Jy/beam ! Combined flux in latest and established models = 0.39988 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.39988 Jy ! Inverting map and beam ! Estimated beam: bmin=2.931 mas, bmaj=7.378 mas, bpa=-8.64 degrees ! Estimated noise=2287.18 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-3.5, 9). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00942073 Jy ! Component: 100 - total flux cleaned = 0.012728 Jy ! Component: 150 - total flux cleaned = 0.0151574 Jy ! Component: 200 - total flux cleaned = 0.0169759 Jy ! Total flux subtracted in 200 components = 0.0169759 Jy ! Clean residual min=-0.005991 max=0.005692 Jy/beam ! Clean residual mean=0.000020 rms=0.001498 Jy/beam ! Combined flux in latest and established models = 0.416856 Jy ! Adding 27 model components to the UV plane model. ! The established model now contains 41 components and 0.416856 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.298 mas, bmaj=24.13 mas, bpa=-5.261 degrees ! Estimated noise=3053.07 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00395904 Jy ! Component: 100 - total flux cleaned = 0.00505025 Jy ! Component: 150 - total flux cleaned = 0.00569881 Jy ! Component: 200 - total flux cleaned = 0.0062862 Jy ! Total flux subtracted in 200 components = 0.0062862 Jy ! Clean residual min=-0.005097 max=0.005427 Jy/beam ! Clean residual mean=0.000046 rms=0.001603 Jy/beam ! Combined flux in latest and established models = 0.423142 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000448866 Jy ! Component: 100 - total flux cleaned = 0.000795339 Jy ! Component: 150 - total flux cleaned = 0.00118058 Jy ! Component: 200 - total flux cleaned = 0.00142256 Jy ! Total flux subtracted in 200 components = 0.00142256 Jy ! Clean residual min=-0.004904 max=0.005131 Jy/beam ! Clean residual mean=0.000044 rms=0.001552 Jy/beam ! Combined flux in latest and established models = 0.424564 Jy ! Adding 24 model components to the UV plane model. ! The established model now contains 62 components and 0.424564 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.931 mas, bmaj=7.378 mas, bpa=-8.64 degrees ! Estimated noise=2287.18 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00182391 Jy ! Component: 100 - total flux cleaned = -0.00137132 Jy ! Component: 150 - total flux cleaned = -0.000966787 Jy ! Component: 200 - total flux cleaned = -0.000487962 Jy ! Total flux subtracted in 200 components = -0.000487962 Jy ! Clean residual min=-0.005418 max=0.005439 Jy/beam ! Clean residual mean=0.000024 rms=0.001266 Jy/beam ! Combined flux in latest and established models = 0.424076 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 85 components and 0.424076 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101575Jy sigma=0.000641 ! Fit after self-cal, rms=0.101529Jy sigma=0.000641 wmodel J0536-3401_S_2017_07_09_pus_map.mod ! Writing 85 model components to file: J0536-3401_S_2017_07_09_pus_map.mod wobs J0536-3401_S_2017_07_09_pus_uvs.fits ! Writing UV FITS file: J0536-3401_S_2017_07_09_pus_uvs.fits wwins J0536-3401_S_2017_07_09_pus_map.win ! wwins: Wrote 6 windows to J0536-3401_S_2017_07_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000197046 Jy ! Component: 100 - total flux cleaned = -0.000718006 Jy ! Component: 150 - total flux cleaned = -0.00128556 Jy ! Component: 200 - total flux cleaned = -0.0017431 Jy ! Component: 250 - total flux cleaned = -0.00203329 Jy ! Component: 300 - total flux cleaned = -0.00162241 Jy ! Component: 350 - total flux cleaned = -0.00135748 Jy ! Component: 400 - total flux cleaned = -0.00116497 Jy ! Component: 450 - total flux cleaned = -0.000979514 Jy ! Component: 500 - total flux cleaned = -0.000860254 Jy ! Component: 550 - total flux cleaned = -0.000628196 Jy ! Component: 600 - total flux cleaned = -0.00034623 Jy ! Component: 650 - total flux cleaned = -0.000455968 Jy ! Component: 700 - total flux cleaned = -0.000669429 Jy ! Component: 750 - total flux cleaned = -0.000670221 Jy ! Component: 800 - total flux cleaned = -0.000619813 Jy ! Component: 850 - total flux cleaned = -0.000620658 Jy ! Component: 900 - total flux cleaned = -0.000765533 Jy ! Component: 950 - total flux cleaned = -0.000573815 Jy ! Component: 1000 - total flux cleaned = -0.000527482 Jy ! Component: 1050 - total flux cleaned = -0.000482192 Jy ! Component: 1100 - total flux cleaned = -0.000392458 Jy ! Component: 1150 - total flux cleaned = -0.000217693 Jy ! Component: 1200 - total flux cleaned = -0.000219284 Jy ! Component: 1250 - total flux cleaned = -0.000134095 Jy ! Component: 1300 - total flux cleaned = -5.06835e-05 Jy ! Component: 1350 - total flux cleaned = -9.83666e-06 Jy ! Component: 1400 - total flux cleaned = 0.00023318 Jy ! Component: 1450 - total flux cleaned = 0.000352 Jy ! Component: 1500 - total flux cleaned = 0.000468796 Jy ! Component: 1550 - total flux cleaned = 0.000545996 Jy ! Component: 1600 - total flux cleaned = 0.000698506 Jy ! Component: 1650 - total flux cleaned = 0.000774058 Jy ! Component: 1700 - total flux cleaned = 0.000959182 Jy ! Component: 1750 - total flux cleaned = 0.00103221 Jy ! Component: 1800 - total flux cleaned = 0.00106888 Jy ! Component: 1850 - total flux cleaned = 0.00114045 Jy ! Component: 1900 - total flux cleaned = 0.00121068 Jy ! Component: 1950 - total flux cleaned = 0.0011753 Jy ! Component: 2000 - total flux cleaned = 0.00100421 Jy ! Component: 2050 - total flux cleaned = 0.00103818 Jy ! Component: 2100 - total flux cleaned = 0.0010051 Jy ! Component: 2150 - total flux cleaned = 0.000906461 Jy ! Component: 2200 - total flux cleaned = 0.00100389 Jy ! Component: 2250 - total flux cleaned = 0.0010359 Jy ! Component: 2300 - total flux cleaned = 0.00109949 Jy ! Component: 2350 - total flux cleaned = 0.00122493 Jy ! Component: 2400 - total flux cleaned = 0.00122461 Jy ! Component: 2450 - total flux cleaned = 0.00122452 Jy ! Component: 2500 - total flux cleaned = 0.00119465 Jy ! Component: 2550 - total flux cleaned = 0.00128483 Jy ! Component: 2600 - total flux cleaned = 0.00131478 Jy ! Component: 2650 - total flux cleaned = 0.00137358 Jy ! Component: 2700 - total flux cleaned = 0.00134441 Jy ! Component: 2750 - total flux cleaned = 0.00143126 Jy ! Component: 2800 - total flux cleaned = 0.00145972 Jy ! Component: 2850 - total flux cleaned = 0.00148812 Jy ! Component: 2900 - total flux cleaned = 0.00151593 Jy ! Component: 2950 - total flux cleaned = 0.00151572 Jy ! Component: 3000 - total flux cleaned = 0.0015435 Jy ! Component: 3050 - total flux cleaned = 0.00157108 Jy ! Component: 3100 - total flux cleaned = 0.0016257 Jy ! Component: 3150 - total flux cleaned = 0.00159864 Jy ! Component: 3200 - total flux cleaned = 0.00157173 Jy ! Component: 3250 - total flux cleaned = 0.00151816 Jy ! Component: 3300 - total flux cleaned = 0.00143878 Jy ! Component: 3350 - total flux cleaned = 0.00141246 Jy ! Component: 3400 - total flux cleaned = 0.00133396 Jy ! Component: 3450 - total flux cleaned = 0.00128186 Jy ! Component: 3500 - total flux cleaned = 0.00125595 Jy ! Component: 3550 - total flux cleaned = 0.00120447 Jy ! Component: 3600 - total flux cleaned = 0.00115307 Jy ! Component: 3650 - total flux cleaned = 0.00107644 Jy ! Component: 3700 - total flux cleaned = 0.000924177 Jy ! Component: 3750 - total flux cleaned = 0.000848463 Jy ! Component: 3800 - total flux cleaned = 0.000722708 Jy ! Component: 3850 - total flux cleaned = 0.00064764 Jy ! Component: 3900 - total flux cleaned = 0.000547993 Jy ! Component: 3950 - total flux cleaned = 0.00052312 Jy ! Component: 4000 - total flux cleaned = 0.0004241 Jy ! Component: 4050 - total flux cleaned = 0.000276236 Jy ! Total flux subtracted in 4096 components = 0.000178016 Jy ! Clean residual min=-0.001568 max=0.001653 Jy/beam ! Clean residual mean=-0.000004 rms=0.000416 Jy/beam ! Combined flux in latest and established models = 0.424254 Jy keep ! Adding 244 model components to the UV plane model. ! The established model now contains 329 components and 0.424254 Jy ![Exited script file: muppet] wmap "J0536-3401_S_2017_07_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.931 x 7.378 at -8.64 degrees (North through East) ! Clean map min=-0.0040458 max=0.29412 Jy/beam ! Writing clean map to FITS file: J0536-3401_S_2017_07_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.294117 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000414008 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.422289 0.422289 0.844577 1.68915 3.37831 6.75662 13.5132 27.0265 54.053 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0012 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.294 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.931 x 7.378 at -8.64 degrees (North through East) ! Clean map min=-0.0040458 max=0.29412 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0536-3401_S_2017_07_09_pus_uvs.log closed on Wed May 8 14:43:03 2019