! Started logfile: J0536-3401_S_2017_02_19_pus_uvs.log on Sat May 4 18:43:42 2019 obs J0536-3401_S_2017_02_19_pus_uva.fits ! Reading UV FITS file: J0536-3401_S_2017_02_19_pus_uva.fits ! AN table 1: 10 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.582222 visibilities/baseline/integration-bin. ! Found source: J0536-3401 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 482 lines of history. ! ! Reading 1048 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0536-3401_S_2017_02_19_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 23 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 23 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 23 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 55 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.603409Jy sigma=0.003787 ! Fit after self-cal, rms=0.598873Jy sigma=0.003763 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.398 mas, bmaj=6.542 mas, bpa=-3.949 degrees ! Estimated noise=5281.73 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.309702 Jy ! Component: 100 - total flux cleaned = 0.391337 Jy ! Total flux subtracted in 100 components = 0.391337 Jy ! Clean residual min=-0.022955 max=0.032747 Jy/beam ! Clean residual mean=0.000048 rms=0.006718 Jy/beam ! Combined flux in latest and established models = 0.391337 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 0.391337 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.136048Jy sigma=0.000770 ! Fit after self-cal, rms=0.135936Jy sigma=0.000769 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.8 mas, bmaj=7.447 mas, bpa=-3.229 degrees ! Estimated noise=3907.64 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0378413 Jy ! Component: 100 - total flux cleaned = 0.0535592 Jy ! Component: 150 - total flux cleaned = 0.0615484 Jy ! Component: 200 - total flux cleaned = 0.0658205 Jy ! Total flux subtracted in 200 components = 0.0658205 Jy ! Clean residual min=-0.020423 max=0.014669 Jy/beam ! Clean residual mean=-0.000012 rms=0.004075 Jy/beam ! Combined flux in latest and established models = 0.457157 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 38 components and 0.457157 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124944Jy sigma=0.000712 ! Fit after self-cal, rms=0.124904Jy sigma=0.000712 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.01 HN 1.00* KP 1.02 ! LA 1.01 MK 0.97 NL 0.89 OV 1.01 ! PT 1.00* SC 0.94 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.02 HN 1.00* KP 0.98 ! LA 0.96 MK 0.98 NL 1.14 OV 1.05 ! PT 1.00* SC 1.04 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.03 HN 1.00* KP 0.89 ! LA 0.78 MK 1.03 NL 1.25 OV 0.95 ! PT 1.00* SC 1.02 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.17 FD 1.07 HN 1.00* KP 1.00* ! LA 0.84 MK 1.01 NL 1.00* OV 0.97 ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.124904Jy sigma=0.000712 ! Fit after self-cal, rms=0.113053Jy sigma=0.000658 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.804 mas, bmaj=7.46 mas, bpa=-3.196 degrees ! Estimated noise=3895.77 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.37808e-05 Jy ! Component: 100 - total flux cleaned = -9.74374e-06 Jy ! Component: 150 - total flux cleaned = -5.57507e-05 Jy ! Component: 200 - total flux cleaned = -9.63822e-05 Jy ! Total flux subtracted in 200 components = -9.63822e-05 Jy ! Clean residual min=-0.011275 max=0.009209 Jy/beam ! Clean residual mean=-0.000000 rms=0.002291 Jy/beam ! Combined flux in latest and established models = 0.457061 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 46 components and 0.457061 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113019Jy sigma=0.000657 ! Fit after self-cal, rms=0.113043Jy sigma=0.000657 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113043Jy sigma=0.000657 ! Fit after self-cal, rms=0.112954Jy sigma=0.000657 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.802 mas, bmaj=7.458 mas, bpa=-3.226 degrees ! Estimated noise=3891.51 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000168151 Jy ! Component: 100 - total flux cleaned = -0.000167949 Jy ! Component: 150 - total flux cleaned = -0.000167597 Jy ! Component: 200 - total flux cleaned = -0.000167659 Jy ! Total flux subtracted in 200 components = -0.000167659 Jy ! Clean residual min=-0.011150 max=0.009132 Jy/beam ! Clean residual mean=-0.000000 rms=0.002277 Jy/beam ! Combined flux in latest and established models = 0.456893 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 51 components and 0.456893 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112931Jy sigma=0.000657 ! Fit after self-cal, rms=0.112934Jy sigma=0.000657 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000136474 Jy ! Component: 100 - total flux cleaned = -0.000135252 Jy ! Component: 150 - total flux cleaned = -0.000135991 Jy ! Component: 200 - total flux cleaned = -0.000138823 Jy ! Total flux subtracted in 200 components = -0.000138823 Jy ! Clean residual min=-0.011085 max=0.009121 Jy/beam ! Clean residual mean=0.000000 rms=0.002269 Jy/beam ! Combined flux in latest and established models = 0.456754 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 53 components and 0.456754 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112918Jy sigma=0.000657 ! Fit after self-cal, rms=0.112921Jy sigma=0.000657 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112921Jy sigma=0.000657 ! Fit after self-cal, rms=0.112855Jy sigma=0.000657 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.801 mas, bmaj=7.457 mas, bpa=-3.251 degrees ! Estimated noise=3888.56 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000186168 Jy ! Component: 100 - total flux cleaned = -0.000186245 Jy ! Component: 150 - total flux cleaned = -0.000187886 Jy ! Component: 200 - total flux cleaned = -0.000187525 Jy ! Total flux subtracted in 200 components = -0.000187525 Jy ! Clean residual min=-0.011018 max=0.009084 Jy/beam ! Clean residual mean=0.000000 rms=0.002261 Jy/beam ! Combined flux in latest and established models = 0.456567 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 55 components and 0.456567 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112844Jy sigma=0.000657 ! Fit after self-cal, rms=0.112846Jy sigma=0.000657 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.29291e-05 Jy ! Component: 100 - total flux cleaned = -9.21928e-05 Jy ! Component: 150 - total flux cleaned = -9.19054e-05 Jy ! Component: 200 - total flux cleaned = -9.28499e-05 Jy ! Total flux subtracted in 200 components = -9.28499e-05 Jy ! Clean residual min=-0.010994 max=0.009064 Jy/beam ! Clean residual mean=0.000001 rms=0.002257 Jy/beam ! Combined flux in latest and established models = 0.456474 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 55 components and 0.456474 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112837Jy sigma=0.000657 ! Fit after self-cal, rms=0.112838Jy sigma=0.000657 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112838Jy sigma=0.000657 ! Fit after self-cal, rms=0.112800Jy sigma=0.000657 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.08 mas, bmaj=22.34 mas, bpa=2.4 degrees ! Estimated noise=5295.79 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000378391 Jy ! Component: 100 - total flux cleaned = -0.000372554 Jy ! Component: 150 - total flux cleaned = -0.000375117 Jy ! Component: 200 - total flux cleaned = -0.000409984 Jy ! Total flux subtracted in 200 components = -0.000409984 Jy ! Clean residual min=-0.011028 max=0.007469 Jy/beam ! Clean residual mean=0.000004 rms=0.002808 Jy/beam ! Combined flux in latest and established models = 0.456064 Jy selfcal ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 57 components and 0.456064 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112819Jy sigma=0.000657 ! Fit after self-cal, rms=0.112798Jy sigma=0.000657 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.51099e-05 Jy ! Component: 100 - total flux cleaned = -6.58491e-05 Jy ! Component: 150 - total flux cleaned = -6.91066e-05 Jy ! Component: 200 - total flux cleaned = -0.000128727 Jy ! Total flux subtracted in 200 components = -0.000128727 Jy ! Clean residual min=-0.010968 max=0.007453 Jy/beam ! Clean residual mean=0.000004 rms=0.002803 Jy/beam ! Combined flux in latest and established models = 0.455935 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 60 components and 0.455935 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112827Jy sigma=0.000657 ! Fit after self-cal, rms=0.112807Jy sigma=0.000657 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.801 mas, bmaj=7.457 mas, bpa=-3.272 degrees ! Estimated noise=3886.89 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.801 x 7.457 at -3.272 degrees (North through East) ! Clean map min=-0.010508 max=0.40051 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.4 mas, bmaj=6.539 mas, bpa=-3.801 degrees ! Estimated noise=5252.61 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.307892 Jy ! Component: 100 - total flux cleaned = 0.388704 Jy ! Component: 150 - total flux cleaned = 0.420958 Jy ! Component: 200 - total flux cleaned = 0.436123 Jy ! Total flux subtracted in 200 components = 0.436123 Jy ! Clean residual min=-0.013397 max=0.011395 Jy/beam ! Clean residual mean=0.000014 rms=0.003365 Jy/beam ! Combined flux in latest and established models = 0.436123 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.436123 Jy ! Inverting map and beam ! Estimated beam: bmin=2.801 mas, bmaj=7.457 mas, bpa=-3.272 degrees ! Estimated noise=3886.89 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0113354 Jy ! Component: 100 - total flux cleaned = 0.0167029 Jy ! Component: 150 - total flux cleaned = 0.0191164 Jy ! Component: 200 - total flux cleaned = 0.019472 Jy ! Total flux subtracted in 200 components = 0.019472 Jy ! Clean residual min=-0.011037 max=0.008884 Jy/beam ! Clean residual mean=0.000002 rms=0.002288 Jy/beam ! Combined flux in latest and established models = 0.455594 Jy ! Adding 20 model components to the UV plane model. ! The established model now contains 35 components and 0.455594 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.08 mas, bmaj=22.34 mas, bpa=2.4 degrees ! Estimated noise=5295.79 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000561888 Jy ! Component: 100 - total flux cleaned = 0.000557638 Jy ! Component: 150 - total flux cleaned = 0.00043343 Jy ! Component: 200 - total flux cleaned = 0.000382485 Jy ! Total flux subtracted in 200 components = 0.000382485 Jy ! Clean residual min=-0.011368 max=0.007497 Jy/beam ! Clean residual mean=0.000004 rms=0.002819 Jy/beam ! Combined flux in latest and established models = 0.455977 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.71882e-05 Jy ! Component: 100 - total flux cleaned = -8.87578e-05 Jy ! Component: 150 - total flux cleaned = -0.000126442 Jy ! Component: 200 - total flux cleaned = -0.000161373 Jy ! Total flux subtracted in 200 components = -0.000161373 Jy ! Clean residual min=-0.011081 max=0.007499 Jy/beam ! Clean residual mean=0.000005 rms=0.002793 Jy/beam ! Combined flux in latest and established models = 0.455816 Jy ! Adding 11 model components to the UV plane model. ! The established model now contains 41 components and 0.455816 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.801 mas, bmaj=7.457 mas, bpa=-3.272 degrees ! Estimated noise=3886.89 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000388095 Jy ! Component: 100 - total flux cleaned = 0.000435602 Jy ! Component: 150 - total flux cleaned = 0.000399043 Jy ! Component: 200 - total flux cleaned = 0.000336882 Jy ! Total flux subtracted in 200 components = 0.000336882 Jy ! Clean residual min=-0.010994 max=0.008974 Jy/beam ! Clean residual mean=0.000001 rms=0.002244 Jy/beam ! Combined flux in latest and established models = 0.456152 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 52 components and 0.456152 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112792Jy sigma=0.000656 ! Fit after self-cal, rms=0.112781Jy sigma=0.000656 wmodel J0536-3401_S_2017_02_19_pus_map.mod ! Writing 52 model components to file: J0536-3401_S_2017_02_19_pus_map.mod wobs J0536-3401_S_2017_02_19_pus_uvs.fits ! Writing UV FITS file: J0536-3401_S_2017_02_19_pus_uvs.fits wwins J0536-3401_S_2017_02_19_pus_map.win ! wwins: Wrote 1 windows to J0536-3401_S_2017_02_19_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00382723 Jy ! Component: 100 - total flux cleaned = -0.00445095 Jy ! Component: 150 - total flux cleaned = -0.00391776 Jy ! Component: 200 - total flux cleaned = -0.00355636 Jy ! Component: 250 - total flux cleaned = -0.00310974 Jy ! Component: 300 - total flux cleaned = -0.00300875 Jy ! Component: 350 - total flux cleaned = -0.00290836 Jy ! Component: 400 - total flux cleaned = -0.00319307 Jy ! Component: 450 - total flux cleaned = -0.0032833 Jy ! Component: 500 - total flux cleaned = -0.00363285 Jy ! Component: 550 - total flux cleaned = -0.00396984 Jy ! Component: 600 - total flux cleaned = -0.00429219 Jy ! Component: 650 - total flux cleaned = -0.00436905 Jy ! Component: 700 - total flux cleaned = -0.00444654 Jy ! Component: 750 - total flux cleaned = -0.00466776 Jy ! Component: 800 - total flux cleaned = -0.00473931 Jy ! Component: 850 - total flux cleaned = -0.00494507 Jy ! Component: 900 - total flux cleaned = -0.00507853 Jy ! Component: 950 - total flux cleaned = -0.00553754 Jy ! Component: 1000 - total flux cleaned = -0.00598658 Jy ! Component: 1050 - total flux cleaned = -0.00623755 Jy ! Component: 1100 - total flux cleaned = -0.00660661 Jy ! Component: 1150 - total flux cleaned = -0.0068476 Jy ! Component: 1200 - total flux cleaned = -0.00702529 Jy ! Component: 1250 - total flux cleaned = -0.00737516 Jy ! Component: 1300 - total flux cleaned = -0.00772016 Jy ! Component: 1350 - total flux cleaned = -0.00811714 Jy ! Component: 1400 - total flux cleaned = -0.00834141 Jy ! Component: 1450 - total flux cleaned = -0.00884094 Jy ! Component: 1500 - total flux cleaned = -0.00917003 Jy ! Component: 1550 - total flux cleaned = -0.00944272 Jy ! Component: 1600 - total flux cleaned = -0.00987496 Jy ! Component: 1650 - total flux cleaned = -0.0102504 Jy ! Component: 1700 - total flux cleaned = -0.0106231 Jy ! Component: 1750 - total flux cleaned = -0.0108881 Jy ! Component: 1800 - total flux cleaned = -0.0112576 Jy ! Component: 1850 - total flux cleaned = -0.0115727 Jy ! Component: 1900 - total flux cleaned = -0.0118866 Jy ! Component: 1950 - total flux cleaned = -0.0121474 Jy ! Component: 2000 - total flux cleaned = -0.0123555 Jy ! Component: 2050 - total flux cleaned = -0.0124597 Jy ! Component: 2100 - total flux cleaned = -0.0125125 Jy ! Component: 2150 - total flux cleaned = -0.0124599 Jy ! Component: 2200 - total flux cleaned = -0.0124607 Jy ! Component: 2250 - total flux cleaned = -0.0124075 Jy ! Component: 2300 - total flux cleaned = -0.0124079 Jy ! Component: 2350 - total flux cleaned = -0.0124075 Jy ! Component: 2400 - total flux cleaned = -0.0124641 Jy ! Component: 2450 - total flux cleaned = -0.0124643 Jy ! Component: 2500 - total flux cleaned = -0.0124639 Jy ! Component: 2550 - total flux cleaned = -0.0125242 Jy ! Component: 2600 - total flux cleaned = -0.0125246 Jy ! Component: 2650 - total flux cleaned = -0.0125245 Jy ! Component: 2700 - total flux cleaned = -0.012525 Jy ! Component: 2750 - total flux cleaned = -0.0125887 Jy ! Component: 2800 - total flux cleaned = -0.0124596 Jy ! Component: 2850 - total flux cleaned = -0.0123936 Jy ! Component: 2900 - total flux cleaned = -0.0123255 Jy ! Component: 2950 - total flux cleaned = -0.0123253 Jy ! Component: 3000 - total flux cleaned = -0.0121853 Jy ! Component: 3050 - total flux cleaned = -0.0121851 Jy ! Component: 3100 - total flux cleaned = -0.0122582 Jy ! Component: 3150 - total flux cleaned = -0.0121842 Jy ! Component: 3200 - total flux cleaned = -0.0121845 Jy ! Component: 3250 - total flux cleaned = -0.0122632 Jy ! Component: 3300 - total flux cleaned = -0.0121825 Jy ! Component: 3350 - total flux cleaned = -0.012101 Jy ! Component: 3400 - total flux cleaned = -0.0120156 Jy ! Component: 3450 - total flux cleaned = -0.0119285 Jy ! Component: 3500 - total flux cleaned = -0.0119281 Jy ! Component: 3550 - total flux cleaned = -0.0118379 Jy ! Component: 3600 - total flux cleaned = -0.011745 Jy ! Component: 3650 - total flux cleaned = -0.0116498 Jy ! Component: 3700 - total flux cleaned = -0.0116503 Jy ! Component: 3750 - total flux cleaned = -0.0115501 Jy ! Component: 3800 - total flux cleaned = -0.0114461 Jy ! Component: 3850 - total flux cleaned = -0.0114469 Jy ! Component: 3900 - total flux cleaned = -0.0113387 Jy ! Component: 3950 - total flux cleaned = -0.0113394 Jy ! Component: 4000 - total flux cleaned = -0.0112276 Jy ! Component: 4050 - total flux cleaned = -0.0111138 Jy ! Total flux subtracted in 4096 components = -0.0109959 Jy ! Clean residual min=-0.006673 max=0.006689 Jy/beam ! Clean residual mean=-0.000036 rms=0.001541 Jy/beam ! Combined flux in latest and established models = 0.445157 Jy keep ! Adding 189 model components to the UV plane model. ! The established model now contains 241 components and 0.445157 Jy ![Exited script file: muppet] wmap "J0536-3401_S_2017_02_19_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.801 x 7.457 at -3.272 degrees (North through East) ! Clean map min=-0.010663 max=0.3988 Jy/beam ! Writing clean map to FITS file: J0536-3401_S_2017_02_19_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.398797 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00155407 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.16907 1.16907 2.33813 4.67626 9.35253 18.7051 37.4101 74.8202 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0046 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.398 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.801 x 7.457 at -3.272 degrees (North through East) ! Clean map min=-0.010663 max=0.3988 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0536-3401_S_2017_02_19_pus_uvs.log closed on Sat May 4 18:43:46 2019