! Started logfile: J0536-3401_S_2017_01_21_pus_uvs.log on Sun May 5 15:46:57 2019 obs J0536-3401_S_2017_01_21_pus_uva.fits ! Reading UV FITS file: J0536-3401_S_2017_01_21_pus_uva.fits ! AN table 1: 8 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.715278 visibilities/baseline/integration-bin. ! Found source: J0536-3401 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 558 lines of history. ! ! Reading 824 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0536-3401_S_2017_01_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 11 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 11 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 11 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 27 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.571881Jy sigma=0.003377 ! Fit after self-cal, rms=0.565039Jy sigma=0.003341 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.362 mas, bmaj=6.535 mas, bpa=-3.32 degrees ! Estimated noise=5403.27 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.347567 Jy ! Component: 100 - total flux cleaned = 0.43156 Jy ! Total flux subtracted in 100 components = 0.43156 Jy ! Clean residual min=-0.024380 max=0.032623 Jy/beam ! Clean residual mean=0.000058 rms=0.007307 Jy/beam ! Combined flux in latest and established models = 0.43156 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.43156 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.135321Jy sigma=0.000758 ! Fit after self-cal, rms=0.135327Jy sigma=0.000758 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.914 mas, bmaj=7.696 mas, bpa=-1.788 degrees ! Estimated noise=4455.3 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0352344 Jy ! Component: 100 - total flux cleaned = 0.0484148 Jy ! Component: 150 - total flux cleaned = 0.0537332 Jy ! Component: 200 - total flux cleaned = 0.0559826 Jy ! Total flux subtracted in 200 components = 0.0559826 Jy ! Clean residual min=-0.016358 max=0.016344 Jy/beam ! Clean residual mean=0.000093 rms=0.004208 Jy/beam ! Combined flux in latest and established models = 0.487543 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 21 components and 0.487543 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.129088Jy sigma=0.000696 ! Fit after self-cal, rms=0.129072Jy sigma=0.000696 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.95 HN 1.00* LA 1.04 ! MK 1.02 NL 1.04 OV 0.98 PT 0.99 ! SC 0.94 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.16 FD 0.94 HN 1.00* LA 1.01 ! MK 0.97 NL 1.08 OV 1.06 PT 0.94 ! SC 1.02 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.99 HN 1.00* LA 1.03 ! MK 1.02 NL 1.12 OV 0.94 PT 0.96 ! SC 1.00 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 FD 0.95 HN 1.00* LA 0.96 ! MK 0.97 NL 1.00* OV 0.88 PT 1.00 ! SC 1.00* ! ! ! Fit before self-cal, rms=0.129072Jy sigma=0.000696 ! Fit after self-cal, rms=0.129802Jy sigma=0.000668 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.906 mas, bmaj=7.69 mas, bpa=-1.773 degrees ! Estimated noise=4452.88 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000294377 Jy ! Component: 100 - total flux cleaned = 0.000245113 Jy ! Component: 150 - total flux cleaned = 0.000246437 Jy ! Component: 200 - total flux cleaned = 0.000281489 Jy ! Total flux subtracted in 200 components = 0.000281489 Jy ! Clean residual min=-0.011494 max=0.009967 Jy/beam ! Clean residual mean=0.000092 rms=0.002798 Jy/beam ! Combined flux in latest and established models = 0.487824 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 31 components and 0.487824 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.129765Jy sigma=0.000668 ! Fit after self-cal, rms=0.129958Jy sigma=0.000668 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.129958Jy sigma=0.000668 ! Fit after self-cal, rms=0.129921Jy sigma=0.000668 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.905 mas, bmaj=7.686 mas, bpa=-1.774 degrees ! Estimated noise=4450.75 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000136084 Jy ! Component: 100 - total flux cleaned = 0.000171875 Jy ! Component: 150 - total flux cleaned = 0.000168885 Jy ! Component: 200 - total flux cleaned = 0.000197118 Jy ! Total flux subtracted in 200 components = 0.000197118 Jy ! Clean residual min=-0.011487 max=0.010022 Jy/beam ! Clean residual mean=0.000092 rms=0.002789 Jy/beam ! Combined flux in latest and established models = 0.488021 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 35 components and 0.488021 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.129895Jy sigma=0.000668 ! Fit after self-cal, rms=0.129892Jy sigma=0.000668 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.57764e-05 Jy ! Component: 100 - total flux cleaned = 4.09054e-05 Jy ! Component: 150 - total flux cleaned = 4.05266e-05 Jy ! Component: 200 - total flux cleaned = 4.14708e-05 Jy ! Total flux subtracted in 200 components = 4.14708e-05 Jy ! Clean residual min=-0.011492 max=0.010029 Jy/beam ! Clean residual mean=0.000092 rms=0.002785 Jy/beam ! Combined flux in latest and established models = 0.488063 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 36 components and 0.488063 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.129872Jy sigma=0.000668 ! Fit after self-cal, rms=0.129871Jy sigma=0.000668 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.129871Jy sigma=0.000668 ! Fit after self-cal, rms=0.129809Jy sigma=0.000667 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.903 mas, bmaj=7.683 mas, bpa=-1.758 degrees ! Estimated noise=4448.27 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000137341 Jy ! Component: 100 - total flux cleaned = 0.000189095 Jy ! Component: 150 - total flux cleaned = 0.000189104 Jy ! Component: 200 - total flux cleaned = 0.000208083 Jy ! Total flux subtracted in 200 components = 0.000208083 Jy ! Clean residual min=-0.011480 max=0.010040 Jy/beam ! Clean residual mean=0.000093 rms=0.002781 Jy/beam ! Combined flux in latest and established models = 0.488271 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 37 components and 0.488271 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.129794Jy sigma=0.000667 ! Fit after self-cal, rms=0.129793Jy sigma=0.000667 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.2787e-05 Jy ! Component: 100 - total flux cleaned = 7.45406e-05 Jy ! Component: 150 - total flux cleaned = 9.28803e-05 Jy ! Component: 200 - total flux cleaned = 0.000109555 Jy ! Total flux subtracted in 200 components = 0.000109555 Jy ! Clean residual min=-0.011475 max=0.010052 Jy/beam ! Clean residual mean=0.000093 rms=0.002779 Jy/beam ! Combined flux in latest and established models = 0.48838 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 38 components and 0.48838 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.129782Jy sigma=0.000667 ! Fit after self-cal, rms=0.129782Jy sigma=0.000667 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.129782Jy sigma=0.000667 ! Fit after self-cal, rms=0.129777Jy sigma=0.000667 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.455 mas, bmaj=25.18 mas, bpa=5.149 degrees ! Estimated noise=5787.35 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000893458 Jy ! Component: 100 - total flux cleaned = 0.000946485 Jy ! Component: 150 - total flux cleaned = 0.000995166 Jy ! Component: 200 - total flux cleaned = 0.00103894 Jy ! Total flux subtracted in 200 components = 0.00103894 Jy ! Clean residual min=-0.011733 max=0.009756 Jy/beam ! Clean residual mean=0.000191 rms=0.003714 Jy/beam ! Combined flux in latest and established models = 0.489419 Jy selfcal ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 40 components and 0.489419 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.129778Jy sigma=0.000667 ! Fit after self-cal, rms=0.129776Jy sigma=0.000667 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.77939e-05 Jy ! Component: 100 - total flux cleaned = 8.65248e-05 Jy ! Component: 150 - total flux cleaned = 8.60204e-05 Jy ! Component: 200 - total flux cleaned = 0.000105931 Jy ! Total flux subtracted in 200 components = 0.000105931 Jy ! Clean residual min=-0.011729 max=0.009812 Jy/beam ! Clean residual mean=0.000191 rms=0.003711 Jy/beam ! Combined flux in latest and established models = 0.489525 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 43 components and 0.489525 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.129784Jy sigma=0.000667 ! Fit after self-cal, rms=0.129782Jy sigma=0.000667 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.902 mas, bmaj=7.681 mas, bpa=-1.735 degrees ! Estimated noise=4447.67 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.902 x 7.681 at -1.735 degrees (North through East) ! Clean map min=-0.010675 max=0.44982 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.362 mas, bmaj=6.537 mas, bpa=-3.107 degrees ! Estimated noise=5351.81 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.344058 Jy ! Component: 100 - total flux cleaned = 0.426637 Jy ! Component: 150 - total flux cleaned = 0.458577 Jy ! Component: 200 - total flux cleaned = 0.47281 Jy ! Total flux subtracted in 200 components = 0.47281 Jy ! Clean residual min=-0.013572 max=0.013163 Jy/beam ! Clean residual mean=0.000049 rms=0.003485 Jy/beam ! Combined flux in latest and established models = 0.47281 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 0.47281 Jy ! Inverting map and beam ! Estimated beam: bmin=2.902 mas, bmaj=7.681 mas, bpa=-1.735 degrees ! Estimated noise=4447.67 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00945676 Jy ! Component: 100 - total flux cleaned = 0.0134615 Jy ! Component: 150 - total flux cleaned = 0.0152944 Jy ! Component: 200 - total flux cleaned = 0.0154741 Jy ! Total flux subtracted in 200 components = 0.0154741 Jy ! Clean residual min=-0.011338 max=0.010131 Jy/beam ! Clean residual mean=0.000093 rms=0.002788 Jy/beam ! Combined flux in latest and established models = 0.488284 Jy ! Adding 12 model components to the UV plane model. ! The established model now contains 27 components and 0.488284 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.455 mas, bmaj=25.18 mas, bpa=5.149 degrees ! Estimated noise=5787.35 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000954399 Jy ! Component: 100 - total flux cleaned = 0.00102521 Jy ! Component: 150 - total flux cleaned = 0.00105798 Jy ! Component: 200 - total flux cleaned = 0.00111871 Jy ! Total flux subtracted in 200 components = 0.00111871 Jy ! Clean residual min=-0.011759 max=0.009665 Jy/beam ! Clean residual mean=0.000191 rms=0.003728 Jy/beam ! Combined flux in latest and established models = 0.489403 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.90415e-05 Jy ! Component: 100 - total flux cleaned = 8.18913e-05 Jy ! Component: 150 - total flux cleaned = 0.000129262 Jy ! Component: 200 - total flux cleaned = 0.000173633 Jy ! Total flux subtracted in 200 components = 0.000173633 Jy ! Clean residual min=-0.011739 max=0.009745 Jy/beam ! Clean residual mean=0.000192 rms=0.003721 Jy/beam ! Combined flux in latest and established models = 0.489576 Jy ! Adding 5 model components to the UV plane model. ! The established model now contains 32 components and 0.489576 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.902 mas, bmaj=7.681 mas, bpa=-1.735 degrees ! Estimated noise=4447.67 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000983332 Jy ! Component: 100 - total flux cleaned = -0.000934169 Jy ! Component: 150 - total flux cleaned = -0.000830953 Jy ! Component: 200 - total flux cleaned = -0.000830818 Jy ! Total flux subtracted in 200 components = -0.000830818 Jy ! Clean residual min=-0.011407 max=0.010049 Jy/beam ! Clean residual mean=0.000094 rms=0.002778 Jy/beam ! Combined flux in latest and established models = 0.488746 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 38 components and 0.488746 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.129768Jy sigma=0.000667 ! Fit after self-cal, rms=0.129765Jy sigma=0.000667 wmodel J0536-3401_S_2017_01_21_pus_map.mod ! Writing 38 model components to file: J0536-3401_S_2017_01_21_pus_map.mod wobs J0536-3401_S_2017_01_21_pus_uvs.fits ! Writing UV FITS file: J0536-3401_S_2017_01_21_pus_uvs.fits wwins J0536-3401_S_2017_01_21_pus_map.win ! wwins: Wrote 1 windows to J0536-3401_S_2017_01_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00369377 Jy ! Component: 100 - total flux cleaned = -0.0040441 Jy ! Component: 150 - total flux cleaned = -0.00485121 Jy ! Component: 200 - total flux cleaned = -0.00559142 Jy ! Component: 250 - total flux cleaned = -0.00587076 Jy ! Component: 300 - total flux cleaned = -0.00600327 Jy ! Component: 350 - total flux cleaned = -0.00551263 Jy ! Component: 400 - total flux cleaned = -0.00528033 Jy ! Component: 450 - total flux cleaned = -0.00516714 Jy ! Component: 500 - total flux cleaned = -0.00495538 Jy ! Component: 550 - total flux cleaned = -0.00485879 Jy ! Component: 600 - total flux cleaned = -0.00514403 Jy ! Component: 650 - total flux cleaned = -0.00523211 Jy ! Component: 700 - total flux cleaned = -0.0051438 Jy ! Component: 750 - total flux cleaned = -0.00531069 Jy ! Component: 800 - total flux cleaned = -0.00538883 Jy ! Component: 850 - total flux cleaned = -0.0053904 Jy ! Component: 900 - total flux cleaned = -0.00524193 Jy ! Component: 950 - total flux cleaned = -0.00517009 Jy ! Component: 1000 - total flux cleaned = -0.00495588 Jy ! Component: 1050 - total flux cleaned = -0.00488835 Jy ! Component: 1100 - total flux cleaned = -0.00475302 Jy ! Component: 1150 - total flux cleaned = -0.00468708 Jy ! Component: 1200 - total flux cleaned = -0.00449451 Jy ! Component: 1250 - total flux cleaned = -0.00411635 Jy ! Component: 1300 - total flux cleaned = -0.00386917 Jy ! Component: 1350 - total flux cleaned = -0.00356639 Jy ! Component: 1400 - total flux cleaned = -0.00344817 Jy ! Component: 1450 - total flux cleaned = -0.00362139 Jy ! Component: 1500 - total flux cleaned = -0.00367664 Jy ! Component: 1550 - total flux cleaned = -0.00378838 Jy ! Component: 1600 - total flux cleaned = -0.00406454 Jy ! Component: 1650 - total flux cleaned = -0.00433472 Jy ! Component: 1700 - total flux cleaned = -0.00454779 Jy ! Component: 1750 - total flux cleaned = -0.00470609 Jy ! Component: 1800 - total flux cleaned = -0.00491276 Jy ! Component: 1850 - total flux cleaned = -0.00506443 Jy ! Component: 1900 - total flux cleaned = -0.00516423 Jy ! Component: 1950 - total flux cleaned = -0.00516389 Jy ! Component: 2000 - total flux cleaned = -0.0054569 Jy ! Component: 2050 - total flux cleaned = -0.00560193 Jy ! Component: 2100 - total flux cleaned = -0.00583979 Jy ! Component: 2150 - total flux cleaned = -0.00602776 Jy ! Component: 2200 - total flux cleaned = -0.00621383 Jy ! Component: 2250 - total flux cleaned = -0.0063976 Jy ! Component: 2300 - total flux cleaned = -0.00671603 Jy ! Component: 2350 - total flux cleaned = -0.00702995 Jy ! Component: 2400 - total flux cleaned = -0.00720804 Jy ! Component: 2450 - total flux cleaned = -0.0075604 Jy ! Component: 2500 - total flux cleaned = -0.007952 Jy ! Component: 2550 - total flux cleaned = -0.0081243 Jy ! Component: 2600 - total flux cleaned = -0.00850843 Jy ! Component: 2650 - total flux cleaned = -0.00859315 Jy ! Component: 2700 - total flux cleaned = -0.00892774 Jy ! Component: 2750 - total flux cleaned = -0.00921731 Jy ! Component: 2800 - total flux cleaned = -0.00938155 Jy ! Component: 2850 - total flux cleaned = -0.00974713 Jy ! Component: 2900 - total flux cleaned = -0.00998857 Jy ! Component: 2950 - total flux cleaned = -0.0102675 Jy ! Component: 3000 - total flux cleaned = -0.0106627 Jy ! Component: 3050 - total flux cleaned = -0.0108197 Jy ! Component: 3100 - total flux cleaned = -0.0112084 Jy ! Component: 3150 - total flux cleaned = -0.0114779 Jy ! Component: 3200 - total flux cleaned = -0.0118217 Jy ! Component: 3250 - total flux cleaned = -0.0121248 Jy ! Component: 3300 - total flux cleaned = -0.012388 Jy ! Component: 3350 - total flux cleaned = -0.0127239 Jy ! Component: 3400 - total flux cleaned = -0.0130944 Jy ! Component: 3450 - total flux cleaned = -0.013425 Jy ! Component: 3500 - total flux cleaned = -0.0137172 Jy ! Component: 3550 - total flux cleaned = -0.0140075 Jy ! Component: 3600 - total flux cleaned = -0.014368 Jy ! Component: 3650 - total flux cleaned = -0.0146903 Jy ! Component: 3700 - total flux cleaned = -0.015046 Jy ! Component: 3750 - total flux cleaned = -0.0152934 Jy ! Component: 3800 - total flux cleaned = -0.0156099 Jy ! Component: 3850 - total flux cleaned = -0.015924 Jy ! Component: 3900 - total flux cleaned = -0.0161671 Jy ! Component: 3950 - total flux cleaned = -0.0164779 Jy ! Component: 4000 - total flux cleaned = -0.0167525 Jy ! Component: 4050 - total flux cleaned = -0.016992 Jy ! Total flux subtracted in 4096 components = -0.0173324 Jy ! Clean residual min=-0.002258 max=0.002163 Jy/beam ! Clean residual mean=0.000014 rms=0.000610 Jy/beam ! Combined flux in latest and established models = 0.471413 Jy keep ! Adding 225 model components to the UV plane model. ! The established model now contains 263 components and 0.471413 Jy ![Exited script file: muppet] wmap "J0536-3401_S_2017_01_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.902 x 7.681 at -1.735 degrees (North through East) ! Clean map min=-0.0047824 max=0.44954 Jy/beam ! Writing clean map to FITS file: J0536-3401_S_2017_01_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.449543 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000604611 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.403484 0.403484 0.806968 1.61394 3.22787 6.45574 12.9115 25.823 51.646 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0018 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.449 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.902 x 7.681 at -1.735 degrees (North through East) ! Clean map min=-0.0047824 max=0.44954 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0536-3401_S_2017_01_21_pus_uvs.log closed on Sun May 5 15:47:01 2019