! Started logfile: J0536-3401_S_2017_01_16_pus_uvs.log on Sun Apr 7 15:06:06 2019 obs J0536-3401_S_2017_01_16_pus_uva.fits ! Reading UV FITS file: J0536-3401_S_2017_01_16_pus_uva.fits ! AN table 1: 8 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.586111 visibilities/baseline/integration-bin. ! Found source: J0536-3401 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 622 lines of history. ! ! Reading 844 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0536-3401_S_2017_01_16_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 18 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 18 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 18 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 34 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.780123Jy sigma=0.003286 ! Fit after self-cal, rms=0.784261Jy sigma=0.003253 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.951 mas, bmaj=29.85 mas, bpa=28.57 degrees ! Estimated noise=6039.96 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.35908 Jy ! Component: 100 - total flux cleaned = 0.439106 Jy ! Total flux subtracted in 100 components = 0.439106 Jy ! Clean residual min=-0.024684 max=0.034080 Jy/beam ! Clean residual mean=-0.000243 rms=0.007569 Jy/beam ! Combined flux in latest and established models = 0.439106 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.439106 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.653900Jy sigma=0.000805 ! Fit after self-cal, rms=0.654202Jy sigma=0.000804 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.83 mas, bmaj=28.39 mas, bpa=27.8 degrees ! Estimated noise=4602.87 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0388815 Jy ! Component: 100 - total flux cleaned = 0.0618269 Jy ! Component: 150 - total flux cleaned = 0.0772636 Jy ! Component: 200 - total flux cleaned = 0.0877813 Jy ! Total flux subtracted in 200 components = 0.0877813 Jy ! Clean residual min=-0.020337 max=0.017348 Jy/beam ! Clean residual mean=0.000210 rms=0.005734 Jy/beam ! Combined flux in latest and established models = 0.526887 Jy ! Performing phase self-cal ! Adding 76 model components to the UV plane model. ! The established model now contains 89 components and 0.526887 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.643843Jy sigma=0.000756 ! Fit after self-cal, rms=0.644139Jy sigma=0.000756 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.99 HN 1.00* KP 1.00 ! LA 1.02 MK 1.00* NL 1.02 OV 0.96 ! PT 1.02 SC 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.04 HN 1.00* KP 0.96 ! LA 1.00 MK 1.00* NL 1.11 OV 0.97 ! PT 1.01 SC 1.03 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.17 FD 1.04 HN 1.00* KP 1.03 ! LA 1.00 MK 1.00* NL 1.07 OV 0.92 ! PT 1.01 SC 0.98 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.06 HN 1.00* KP 0.18 ! LA 1.00* MK 1.00* NL 1.00* OV 0.94 ! PT 0.99 SC 1.27 ! ! ! Fit before self-cal, rms=0.644139Jy sigma=0.000756 ! Fit after self-cal, rms=0.164392Jy sigma=0.000657 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.857 mas, bmaj=28.91 mas, bpa=27.78 degrees ! Estimated noise=4618.32 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00500649 Jy ! Component: 100 - total flux cleaned = 0.00483498 Jy ! Component: 150 - total flux cleaned = 0.00482495 Jy ! Component: 200 - total flux cleaned = 0.00508379 Jy ! Total flux subtracted in 200 components = 0.00508379 Jy ! Clean residual min=-0.008704 max=0.008310 Jy/beam ! Clean residual mean=0.000079 rms=0.002452 Jy/beam ! Combined flux in latest and established models = 0.531971 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 115 components and 0.531971 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.163762Jy sigma=0.000654 ! Fit after self-cal, rms=0.161577Jy sigma=0.000653 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.161577Jy sigma=0.000653 ! Fit after self-cal, rms=0.160603Jy sigma=0.000653 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.863 mas, bmaj=28.88 mas, bpa=27.76 degrees ! Estimated noise=4616.53 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000827205 Jy ! Component: 100 - total flux cleaned = 6.50512e-05 Jy ! Component: 150 - total flux cleaned = -2.64479e-05 Jy ! Component: 200 - total flux cleaned = -2.4601e-05 Jy ! Total flux subtracted in 200 components = -2.4601e-05 Jy ! Clean residual min=-0.008264 max=0.008503 Jy/beam ! Clean residual mean=0.000062 rms=0.002277 Jy/beam ! Combined flux in latest and established models = 0.531946 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 125 components and 0.531946 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.160394Jy sigma=0.000652 ! Fit after self-cal, rms=0.160383Jy sigma=0.000652 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.41544e-05 Jy ! Component: 100 - total flux cleaned = -1.14578e-05 Jy ! Component: 150 - total flux cleaned = 6.29105e-05 Jy ! Component: 200 - total flux cleaned = 6.49482e-05 Jy ! Total flux subtracted in 200 components = 6.49482e-05 Jy ! Clean residual min=-0.008291 max=0.008602 Jy/beam ! Clean residual mean=0.000064 rms=0.002244 Jy/beam ! Combined flux in latest and established models = 0.532011 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 134 components and 0.532011 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.160263Jy sigma=0.000652 ! Fit after self-cal, rms=0.160267Jy sigma=0.000652 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.160267Jy sigma=0.000652 ! Fit after self-cal, rms=0.160305Jy sigma=0.000652 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.865 mas, bmaj=28.9 mas, bpa=27.76 degrees ! Estimated noise=4614.29 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000782198 Jy ! Component: 100 - total flux cleaned = -0.000916393 Jy ! Component: 150 - total flux cleaned = -0.000790266 Jy ! Component: 200 - total flux cleaned = -0.000789121 Jy ! Total flux subtracted in 200 components = -0.000789121 Jy ! Clean residual min=-0.008390 max=0.008513 Jy/beam ! Clean residual mean=0.000054 rms=0.002206 Jy/beam ! Combined flux in latest and established models = 0.531222 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 141 components and 0.531222 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.160198Jy sigma=0.000651 ! Fit after self-cal, rms=0.160211Jy sigma=0.000651 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.55927e-05 Jy ! Component: 100 - total flux cleaned = 0.000111199 Jy ! Component: 150 - total flux cleaned = 0.000111942 Jy ! Component: 200 - total flux cleaned = 0.000211143 Jy ! Total flux subtracted in 200 components = 0.000211143 Jy ! Clean residual min=-0.008404 max=0.008559 Jy/beam ! Clean residual mean=0.000056 rms=0.002193 Jy/beam ! Combined flux in latest and established models = 0.531433 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 151 components and 0.531433 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.160135Jy sigma=0.000651 ! Fit after self-cal, rms=0.160148Jy sigma=0.000651 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.160148Jy sigma=0.000651 ! Fit after self-cal, rms=0.160207Jy sigma=0.000651 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.268 mas, bmaj=39.19 mas, bpa=16.59 degrees ! Estimated noise=5106.68 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000171326 Jy ! Component: 100 - total flux cleaned = 4.66372e-05 Jy ! Component: 150 - total flux cleaned = 4.89556e-05 Jy ! Component: 200 - total flux cleaned = 4.80565e-05 Jy ! Total flux subtracted in 200 components = 4.80565e-05 Jy ! Clean residual min=-0.008860 max=0.007384 Jy/beam ! Clean residual mean=0.000078 rms=0.002345 Jy/beam ! Combined flux in latest and established models = 0.531481 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 168 components and 0.531481 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.160171Jy sigma=0.000651 ! Fit after self-cal, rms=0.160170Jy sigma=0.000651 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000124424 Jy ! Component: 100 - total flux cleaned = 0.000124745 Jy ! Component: 150 - total flux cleaned = 0.000157604 Jy ! Component: 200 - total flux cleaned = 0.000217379 Jy ! Total flux subtracted in 200 components = 0.000217379 Jy ! Clean residual min=-0.008716 max=0.007317 Jy/beam ! Clean residual mean=0.000080 rms=0.002337 Jy/beam ! Combined flux in latest and established models = 0.531699 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 181 components and 0.531698 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.160143Jy sigma=0.000651 ! Fit after self-cal, rms=0.160149Jy sigma=0.000651 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.864 mas, bmaj=28.91 mas, bpa=27.76 degrees ! Estimated noise=4613.3 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.864 x 28.91 at 27.76 degrees (North through East) ! Clean map min=-0.0081633 max=0.45344 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.963 mas, bmaj=30.34 mas, bpa=28.54 degrees ! Estimated noise=6075.31 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.361347 Jy ! Component: 100 - total flux cleaned = 0.441367 Jy ! Component: 150 - total flux cleaned = 0.468148 Jy ! Component: 200 - total flux cleaned = 0.482699 Jy ! Total flux subtracted in 200 components = 0.482699 Jy ! Clean residual min=-0.014802 max=0.015091 Jy/beam ! Clean residual mean=-0.000155 rms=0.004441 Jy/beam ! Combined flux in latest and established models = 0.482699 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 51 model components to the UV plane model. ! The established model now contains 51 components and 0.482699 Jy ! Inverting map and beam ! Estimated beam: bmin=3.864 mas, bmaj=28.91 mas, bpa=27.76 degrees ! Estimated noise=4613.3 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0126194 Jy ! Component: 100 - total flux cleaned = 0.0207581 Jy ! Component: 150 - total flux cleaned = 0.0269324 Jy ! Component: 200 - total flux cleaned = 0.0311337 Jy ! Total flux subtracted in 200 components = 0.0311337 Jy ! Clean residual min=-0.009795 max=0.008653 Jy/beam ! Clean residual mean=-0.000033 rms=0.002466 Jy/beam ! Combined flux in latest and established models = 0.513833 Jy ! Adding 47 model components to the UV plane model. ! The established model now contains 98 components and 0.513833 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.268 mas, bmaj=39.19 mas, bpa=16.59 degrees ! Estimated noise=5106.68 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00431207 Jy ! Component: 100 - total flux cleaned = 0.00741175 Jy ! Component: 150 - total flux cleaned = 0.00902681 Jy ! Component: 200 - total flux cleaned = 0.00973544 Jy ! Total flux subtracted in 200 components = 0.00973544 Jy ! Clean residual min=-0.010241 max=0.007124 Jy/beam ! Clean residual mean=0.000018 rms=0.002494 Jy/beam ! Combined flux in latest and established models = 0.523568 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000648462 Jy ! Component: 100 - total flux cleaned = 0.00131261 Jy ! Component: 150 - total flux cleaned = 0.00179037 Jy ! Component: 200 - total flux cleaned = 0.00223226 Jy ! Total flux subtracted in 200 components = 0.00223226 Jy ! Clean residual min=-0.009777 max=0.007132 Jy/beam ! Clean residual mean=0.000036 rms=0.002424 Jy/beam ! Combined flux in latest and established models = 0.5258 Jy ! Adding 45 model components to the UV plane model. ! The established model now contains 140 components and 0.5258 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.864 mas, bmaj=28.91 mas, bpa=27.76 degrees ! Estimated noise=4613.3 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.93958e-06 Jy ! Component: 100 - total flux cleaned = -1.00293e-05 Jy ! Component: 150 - total flux cleaned = -1.62957e-05 Jy ! Component: 200 - total flux cleaned = -2.12778e-05 Jy ! Total flux subtracted in 200 components = -2.12778e-05 Jy ! Clean residual min=-0.008644 max=0.008658 Jy/beam ! Clean residual mean=0.000027 rms=0.002226 Jy/beam ! Combined flux in latest and established models = 0.525779 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 158 components and 0.525779 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.160531Jy sigma=0.000652 ! Fit after self-cal, rms=0.160500Jy sigma=0.000652 wmodel J0536-3401_S_2017_01_16_pus_map.mod ! Writing 158 model components to file: J0536-3401_S_2017_01_16_pus_map.mod wobs J0536-3401_S_2017_01_16_pus_uvs.fits ! Writing UV FITS file: J0536-3401_S_2017_01_16_pus_uvs.fits wwins J0536-3401_S_2017_01_16_pus_map.win ! wwins: Wrote 1 windows to J0536-3401_S_2017_01_16_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00087603 Jy ! Component: 100 - total flux cleaned = -0.0016869 Jy ! Component: 150 - total flux cleaned = -0.00144198 Jy ! Component: 200 - total flux cleaned = -0.00167301 Jy ! Component: 250 - total flux cleaned = -0.00200088 Jy ! Component: 300 - total flux cleaned = -0.00200138 Jy ! Component: 350 - total flux cleaned = -0.00190185 Jy ! Component: 400 - total flux cleaned = -0.00180428 Jy ! Component: 450 - total flux cleaned = -0.0017069 Jy ! Component: 500 - total flux cleaned = -0.00152306 Jy ! Component: 550 - total flux cleaned = -0.00117071 Jy ! Component: 600 - total flux cleaned = -0.000739847 Jy ! Component: 650 - total flux cleaned = -0.000488263 Jy ! Component: 700 - total flux cleaned = -8.08141e-05 Jy ! Component: 750 - total flux cleaned = -8.12015e-05 Jy ! Component: 800 - total flux cleaned = -0.000235221 Jy ! Component: 850 - total flux cleaned = -8.42372e-05 Jy ! Component: 900 - total flux cleaned = 6.3646e-05 Jy ! Component: 950 - total flux cleaned = 0.000208159 Jy ! Component: 1000 - total flux cleaned = 0.000278609 Jy ! Component: 1050 - total flux cleaned = 0.000280112 Jy ! Component: 1100 - total flux cleaned = 0.00034996 Jy ! Component: 1150 - total flux cleaned = 0.000484299 Jy ! Component: 1200 - total flux cleaned = 0.000286471 Jy ! Component: 1250 - total flux cleaned = 0.000287227 Jy ! Component: 1300 - total flux cleaned = 0.000157819 Jy ! Component: 1350 - total flux cleaned = -3.15918e-05 Jy ! Component: 1400 - total flux cleaned = -9.37609e-05 Jy ! Component: 1450 - total flux cleaned = -0.000338331 Jy ! Component: 1500 - total flux cleaned = -0.000458987 Jy ! Component: 1550 - total flux cleaned = -0.000638184 Jy ! Component: 1600 - total flux cleaned = -0.000755744 Jy ! Component: 1650 - total flux cleaned = -0.000872888 Jy ! Component: 1700 - total flux cleaned = -0.000987771 Jy ! Component: 1750 - total flux cleaned = -0.000930528 Jy ! Component: 1800 - total flux cleaned = -0.00115648 Jy ! Component: 1850 - total flux cleaned = -0.00115645 Jy ! Component: 1900 - total flux cleaned = -0.00126702 Jy ! Component: 1950 - total flux cleaned = -0.00132186 Jy ! Component: 2000 - total flux cleaned = -0.00137661 Jy ! Component: 2050 - total flux cleaned = -0.00132258 Jy ! Component: 2100 - total flux cleaned = -0.00142937 Jy ! Component: 2150 - total flux cleaned = -0.00153518 Jy ! Component: 2200 - total flux cleaned = -0.00153508 Jy ! Component: 2250 - total flux cleaned = -0.00174227 Jy ! Component: 2300 - total flux cleaned = -0.00174167 Jy ! Component: 2350 - total flux cleaned = -0.0017925 Jy ! Component: 2400 - total flux cleaned = -0.00179215 Jy ! Component: 2450 - total flux cleaned = -0.00169067 Jy ! Component: 2500 - total flux cleaned = -0.0014894 Jy ! Component: 2550 - total flux cleaned = -0.00148954 Jy ! Component: 2600 - total flux cleaned = -0.00129038 Jy ! Component: 2650 - total flux cleaned = -0.00114243 Jy ! Component: 2700 - total flux cleaned = -0.00104362 Jy ! Component: 2750 - total flux cleaned = -0.000896645 Jy ! Component: 2800 - total flux cleaned = -0.000700915 Jy ! Component: 2850 - total flux cleaned = -0.000408094 Jy ! Component: 2900 - total flux cleaned = -0.000262148 Jy ! Component: 2950 - total flux cleaned = 7.74545e-05 Jy ! Component: 3000 - total flux cleaned = 0.000223026 Jy ! Component: 3050 - total flux cleaned = 0.000610168 Jy ! Component: 3100 - total flux cleaned = 0.00099604 Jy ! Component: 3150 - total flux cleaned = 0.0012373 Jy ! Component: 3200 - total flux cleaned = 0.00152705 Jy ! Component: 3250 - total flux cleaned = 0.00196095 Jy ! Component: 3300 - total flux cleaned = 0.00229876 Jy ! Component: 3350 - total flux cleaned = 0.00268472 Jy ! Component: 3400 - total flux cleaned = 0.00297481 Jy ! Component: 3450 - total flux cleaned = 0.00345802 Jy ! Component: 3500 - total flux cleaned = 0.00374876 Jy ! Component: 3550 - total flux cleaned = 0.00418459 Jy ! Component: 3600 - total flux cleaned = 0.00467045 Jy ! Component: 3650 - total flux cleaned = 0.00520599 Jy ! Component: 3700 - total flux cleaned = 0.00559631 Jy ! Component: 3750 - total flux cleaned = 0.00603672 Jy ! Component: 3800 - total flux cleaned = 0.00647797 Jy ! Component: 3850 - total flux cleaned = 0.00697009 Jy ! Component: 3900 - total flux cleaned = 0.00721689 Jy ! Component: 3950 - total flux cleaned = 0.00741576 Jy ! Component: 4000 - total flux cleaned = 0.00761619 Jy ! Component: 4050 - total flux cleaned = 0.00776799 Jy ! Total flux subtracted in 4096 components = 0.00787024 Jy ! Clean residual min=-0.003180 max=0.002846 Jy/beam ! Clean residual mean=0.000041 rms=0.000933 Jy/beam ! Combined flux in latest and established models = 0.533649 Jy keep ! Adding 226 model components to the UV plane model. ! The established model now contains 384 components and 0.533649 Jy ![Exited script file: muppet] wmap "J0536-3401_S_2017_01_16_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.864 x 28.91 at 27.76 degrees (North through East) ! Clean map min=-0.008 max=0.46362 Jy/beam ! Writing clean map to FITS file: J0536-3401_S_2017_01_16_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.463618 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000915897 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.592663 0.592663 1.18533 2.37065 4.74131 9.48261 18.9652 37.9304 75.8609 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0027 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.463 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.864 x 28.91 at 27.76 degrees (North through East) ! Clean map min=-0.008 max=0.46362 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0536-3401_S_2017_01_16_pus_uvs.log closed on Sun Apr 7 15:06:11 2019