! Started logfile: J0536-2005_S_2017_07_09_pus_uvs.log on Wed May 8 14:42:52 2019 obs J0536-2005_S_2017_07_09_pus_uva.fits ! Reading UV FITS file: J0536-2005_S_2017_07_09_pus_uva.fits ! AN table 1: 115 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.901449 visibilities/baseline/integration-bin. ! Found source: J0536-2005 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 594 lines of history. ! ! Reading 18660 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0536-2005_S_2017_07_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 58 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 142 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 142 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 782 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.974252Jy sigma=0.007559 ! Fit after self-cal, rms=0.943243Jy sigma=0.007332 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.568 mas, bmaj=7.019 mas, bpa=-7.436 degrees ! Estimated noise=1305.31 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0473999 Jy ! Component: 100 - total flux cleaned = 0.0582856 Jy ! Total flux subtracted in 100 components = 0.0582856 Jy ! Clean residual min=-0.003961 max=0.004315 Jy/beam ! Clean residual mean=-0.000002 rms=0.001048 Jy/beam ! Combined flux in latest and established models = 0.0582856 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.0582856 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087674Jy sigma=0.000655 ! Fit after self-cal, rms=0.087319Jy sigma=0.000653 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.948 mas, bmaj=8.063 mas, bpa=-7.017 degrees ! Estimated noise=799.955 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00417002 Jy ! Component: 100 - total flux cleaned = 0.00589915 Jy ! Component: 150 - total flux cleaned = 0.00652327 Jy ! Component: 200 - total flux cleaned = 0.00663139 Jy ! Total flux subtracted in 200 components = 0.00663139 Jy ! Clean residual min=-0.002531 max=0.002648 Jy/beam ! Clean residual mean=0.000001 rms=0.000640 Jy/beam ! Combined flux in latest and established models = 0.0649169 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 22 components and 0.0649169 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087137Jy sigma=0.000651 ! Fit after self-cal, rms=0.087130Jy sigma=0.000651 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 0.90 HN 0.95 KP 1.08 ! LA 1.07 MK 1.07 NL 0.89 OV 0.97 ! PT 0.97 SC 0.91 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.99 HN 1.21 KP 0.99 ! LA 1.02 MK 1.01 NL 0.96 OV 1.24 ! PT 1.00 SC 1.01 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.03 HN 1.26 KP 0.96 ! LA 1.00 MK 0.95 NL 1.02 OV 0.96 ! PT 0.92 SC 1.02 ! ! ! Correcting IF 4. ! A total of 45 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.91 HN 0.76 KP 1.00* ! LA 0.83 MK 0.95 NL 1.00* OV 1.00* ! PT 0.97 SC 1.00* ! ! ! Fit before self-cal, rms=0.087130Jy sigma=0.000651 ! Fit after self-cal, rms=0.088965Jy sigma=0.000649 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.948 mas, bmaj=8.041 mas, bpa=-6.818 degrees ! Estimated noise=799.868 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000177998 Jy ! Component: 100 - total flux cleaned = 0.000160585 Jy ! Component: 150 - total flux cleaned = 0.000145761 Jy ! Component: 200 - total flux cleaned = 0.000120481 Jy ! Total flux subtracted in 200 components = 0.000120481 Jy ! Clean residual min=-0.002264 max=0.002381 Jy/beam ! Clean residual mean=0.000002 rms=0.000575 Jy/beam ! Combined flux in latest and established models = 0.0650374 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 35 components and 0.0650374 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088955Jy sigma=0.000649 ! Fit after self-cal, rms=0.089069Jy sigma=0.000649 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089069Jy sigma=0.000649 ! Fit after self-cal, rms=0.089606Jy sigma=0.000648 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.941 mas, bmaj=8.051 mas, bpa=-6.845 degrees ! Estimated noise=799.861 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000205322 Jy ! Component: 100 - total flux cleaned = 0.000141785 Jy ! Component: 150 - total flux cleaned = 0.000130683 Jy ! Component: 200 - total flux cleaned = 0.000100693 Jy ! Total flux subtracted in 200 components = 0.000100693 Jy ! Clean residual min=-0.002204 max=0.002121 Jy/beam ! Clean residual mean=0.000003 rms=0.000544 Jy/beam ! Combined flux in latest and established models = 0.0651381 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 37 components and 0.0651381 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089598Jy sigma=0.000648 ! Fit after self-cal, rms=0.089631Jy sigma=0.000648 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.00949e-05 Jy ! Component: 100 - total flux cleaned = 1.72708e-05 Jy ! Component: 150 - total flux cleaned = -1.65742e-06 Jy ! Component: 200 - total flux cleaned = -1.76569e-05 Jy ! Total flux subtracted in 200 components = -1.76569e-05 Jy ! Clean residual min=-0.002202 max=0.002120 Jy/beam ! Clean residual mean=0.000003 rms=0.000546 Jy/beam ! Combined flux in latest and established models = 0.0651205 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 39 components and 0.0651205 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089626Jy sigma=0.000648 ! Fit after self-cal, rms=0.089628Jy sigma=0.000648 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089628Jy sigma=0.000648 ! Fit after self-cal, rms=0.092096Jy sigma=0.000647 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.941 mas, bmaj=8.074 mas, bpa=-6.786 degrees ! Estimated noise=802.186 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.65697e-05 Jy ! Component: 100 - total flux cleaned = -0.000121984 Jy ! Component: 150 - total flux cleaned = -0.000154334 Jy ! Component: 200 - total flux cleaned = -0.000164562 Jy ! Total flux subtracted in 200 components = -0.000164562 Jy ! Clean residual min=-0.002151 max=0.001913 Jy/beam ! Clean residual mean=0.000004 rms=0.000488 Jy/beam ! Combined flux in latest and established models = 0.0649559 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 46 components and 0.0649559 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092090Jy sigma=0.000647 ! Fit after self-cal, rms=0.092191Jy sigma=0.000647 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.47937e-06 Jy ! Component: 100 - total flux cleaned = -5.3561e-06 Jy ! Component: 150 - total flux cleaned = -3.61521e-05 Jy ! Component: 200 - total flux cleaned = -5.51561e-05 Jy ! Total flux subtracted in 200 components = -5.51561e-05 Jy ! Clean residual min=-0.002137 max=0.001843 Jy/beam ! Clean residual mean=0.000004 rms=0.000492 Jy/beam ! Combined flux in latest and established models = 0.0649007 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 47 components and 0.0649007 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092186Jy sigma=0.000647 ! Fit after self-cal, rms=0.092188Jy sigma=0.000647 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092188Jy sigma=0.000647 ! Fit after self-cal, rms=0.093121Jy sigma=0.000647 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.505 mas, bmaj=17.94 mas, bpa=-4.738 degrees ! Estimated noise=1043.8 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000313366 Jy ! Component: 100 - total flux cleaned = -0.000320536 Jy ! Component: 150 - total flux cleaned = -0.000326313 Jy ! Component: 200 - total flux cleaned = -0.000334972 Jy ! Total flux subtracted in 200 components = -0.000334972 Jy ! Clean residual min=-0.002053 max=0.001835 Jy/beam ! Clean residual mean=0.000010 rms=0.000551 Jy/beam ! Combined flux in latest and established models = 0.0645658 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 50 components and 0.0645658 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093119Jy sigma=0.000647 ! Fit after self-cal, rms=0.093119Jy sigma=0.000647 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.77714e-05 Jy ! Component: 100 - total flux cleaned = -7.46561e-05 Jy ! Component: 150 - total flux cleaned = -8.00969e-05 Jy ! Component: 200 - total flux cleaned = -8.88109e-05 Jy ! Total flux subtracted in 200 components = -8.88109e-05 Jy ! Clean residual min=-0.002099 max=0.001832 Jy/beam ! Clean residual mean=0.000010 rms=0.000560 Jy/beam ! Combined flux in latest and established models = 0.0644769 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 51 components and 0.0644769 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093117Jy sigma=0.000647 ! Fit after self-cal, rms=0.093121Jy sigma=0.000647 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.942 mas, bmaj=8.09 mas, bpa=-6.848 degrees ! Estimated noise=802.298 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.942 x 8.09 at -6.848 degrees (North through East) ! Clean map min=-0.0019833 max=0.059945 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.561 mas, bmaj=7.116 mas, bpa=-7.408 degrees ! Estimated noise=1305.06 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0473652 Jy ! Component: 100 - total flux cleaned = 0.0590736 Jy ! Component: 150 - total flux cleaned = 0.0635864 Jy ! Component: 200 - total flux cleaned = 0.0641303 Jy ! Total flux subtracted in 200 components = 0.0641303 Jy ! Clean residual min=-0.003550 max=0.003380 Jy/beam ! Clean residual mean=0.000000 rms=0.000871 Jy/beam ! Combined flux in latest and established models = 0.0641303 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.0641303 Jy ! Inverting map and beam ! Estimated beam: bmin=2.942 mas, bmaj=8.09 mas, bpa=-6.848 degrees ! Estimated noise=802.298 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000249451 Jy ! Component: 100 - total flux cleaned = 0.000332918 Jy ! Component: 150 - total flux cleaned = 0.000395118 Jy ! Component: 200 - total flux cleaned = 0.00044343 Jy ! Total flux subtracted in 200 components = 0.00044343 Jy ! Clean residual min=-0.002095 max=0.001884 Jy/beam ! Clean residual mean=0.000004 rms=0.000499 Jy/beam ! Combined flux in latest and established models = 0.0645737 Jy ! Adding 13 model components to the UV plane model. ! The established model now contains 23 components and 0.0645737 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.505 mas, bmaj=17.94 mas, bpa=-4.738 degrees ! Estimated noise=1043.8 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000124569 Jy ! Component: 100 - total flux cleaned = -0.00012569 Jy ! Component: 150 - total flux cleaned = -0.000131999 Jy ! Component: 200 - total flux cleaned = -0.000141971 Jy ! Total flux subtracted in 200 components = -0.000141971 Jy ! Clean residual min=-0.002097 max=0.001823 Jy/beam ! Clean residual mean=0.000010 rms=0.000560 Jy/beam ! Combined flux in latest and established models = 0.0644317 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.85881e-06 Jy ! Component: 100 - total flux cleaned = -1.28891e-05 Jy ! Component: 150 - total flux cleaned = -2.06904e-05 Jy ! Component: 200 - total flux cleaned = -2.815e-05 Jy ! Total flux subtracted in 200 components = -2.815e-05 Jy ! Clean residual min=-0.002099 max=0.001819 Jy/beam ! Clean residual mean=0.000010 rms=0.000560 Jy/beam ! Combined flux in latest and established models = 0.0644036 Jy ! Adding 9 model components to the UV plane model. ! The established model now contains 29 components and 0.0644036 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.942 mas, bmaj=8.09 mas, bpa=-6.848 degrees ! Estimated noise=802.298 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000108415 Jy ! Component: 100 - total flux cleaned = 0.00012195 Jy ! Component: 150 - total flux cleaned = 0.000144033 Jy ! Component: 200 - total flux cleaned = 0.000154041 Jy ! Total flux subtracted in 200 components = 0.000154041 Jy ! Clean residual min=-0.002067 max=0.001870 Jy/beam ! Clean residual mean=0.000004 rms=0.000496 Jy/beam ! Combined flux in latest and established models = 0.0645576 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 37 components and 0.0645576 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093115Jy sigma=0.000647 ! Fit after self-cal, rms=0.093115Jy sigma=0.000647 wmodel J0536-2005_S_2017_07_09_pus_map.mod ! Writing 37 model components to file: J0536-2005_S_2017_07_09_pus_map.mod wobs J0536-2005_S_2017_07_09_pus_uvs.fits ! Writing UV FITS file: J0536-2005_S_2017_07_09_pus_uvs.fits wwins J0536-2005_S_2017_07_09_pus_map.win ! wwins: Wrote 1 windows to J0536-2005_S_2017_07_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000648286 Jy ! Component: 100 - total flux cleaned = -0.00101903 Jy ! Component: 150 - total flux cleaned = -0.00108224 Jy ! Component: 200 - total flux cleaned = -0.00117414 Jy ! Component: 250 - total flux cleaned = -0.00135152 Jy ! Component: 300 - total flux cleaned = -0.00140873 Jy ! Component: 350 - total flux cleaned = -0.00149193 Jy ! Component: 400 - total flux cleaned = -0.00157347 Jy ! Component: 450 - total flux cleaned = -0.00167971 Jy ! Component: 500 - total flux cleaned = -0.00180894 Jy ! Component: 550 - total flux cleaned = -0.00196071 Jy ! Component: 600 - total flux cleaned = -0.00208439 Jy ! Component: 650 - total flux cleaned = -0.00225378 Jy ! Component: 700 - total flux cleaned = -0.00234871 Jy ! Component: 750 - total flux cleaned = -0.00241851 Jy ! Component: 800 - total flux cleaned = -0.00257912 Jy ! Component: 850 - total flux cleaned = -0.00262418 Jy ! Component: 900 - total flux cleaned = -0.00269104 Jy ! Component: 950 - total flux cleaned = -0.00273493 Jy ! Component: 1000 - total flux cleaned = -0.00279951 Jy ! Component: 1050 - total flux cleaned = -0.00284183 Jy ! Component: 1100 - total flux cleaned = -0.00294619 Jy ! Component: 1150 - total flux cleaned = -0.00290542 Jy ! Component: 1200 - total flux cleaned = -0.00302713 Jy ! Component: 1250 - total flux cleaned = -0.00308677 Jy ! Component: 1300 - total flux cleaned = -0.00304704 Jy ! Component: 1350 - total flux cleaned = -0.00306684 Jy ! Component: 1400 - total flux cleaned = -0.00306713 Jy ! Component: 1450 - total flux cleaned = -0.0030669 Jy ! Component: 1500 - total flux cleaned = -0.00301037 Jy ! Component: 1550 - total flux cleaned = -0.00293615 Jy ! Component: 1600 - total flux cleaned = -0.00293631 Jy ! Component: 1650 - total flux cleaned = -0.00288181 Jy ! Component: 1700 - total flux cleaned = -0.00279209 Jy ! Component: 1750 - total flux cleaned = -0.00279205 Jy ! Component: 1800 - total flux cleaned = -0.0028095 Jy ! Component: 1850 - total flux cleaned = -0.00277432 Jy ! Component: 1900 - total flux cleaned = -0.00277438 Jy ! Component: 1950 - total flux cleaned = -0.00267218 Jy ! Component: 2000 - total flux cleaned = -0.00267221 Jy ! Component: 2050 - total flux cleaned = -0.00263879 Jy ! Component: 2100 - total flux cleaned = -0.0026553 Jy ! Component: 2150 - total flux cleaned = -0.00262207 Jy ! Component: 2200 - total flux cleaned = -0.00257352 Jy ! Component: 2250 - total flux cleaned = -0.00258971 Jy ! Component: 2300 - total flux cleaned = -0.00252602 Jy ! Component: 2350 - total flux cleaned = -0.00254197 Jy ! Component: 2400 - total flux cleaned = -0.00260453 Jy ! Component: 2450 - total flux cleaned = -0.00258878 Jy ! Component: 2500 - total flux cleaned = -0.00258868 Jy ! Component: 2550 - total flux cleaned = -0.00255809 Jy ! Component: 2600 - total flux cleaned = -0.00257319 Jy ! Component: 2650 - total flux cleaned = -0.00258808 Jy ! Component: 2700 - total flux cleaned = -0.00257315 Jy ! Component: 2750 - total flux cleaned = -0.0025584 Jy ! Component: 2800 - total flux cleaned = -0.00250007 Jy ! Component: 2850 - total flux cleaned = -0.00250002 Jy ! Component: 2900 - total flux cleaned = -0.00247133 Jy ! Component: 2950 - total flux cleaned = -0.00234335 Jy ! Component: 3000 - total flux cleaned = -0.0023152 Jy ! Component: 3050 - total flux cleaned = -0.0022592 Jy ! Component: 3100 - total flux cleaned = -0.00221759 Jy ! Component: 3150 - total flux cleaned = -0.00213491 Jy ! Component: 3200 - total flux cleaned = -0.00208024 Jy ! Component: 3250 - total flux cleaned = -0.00197184 Jy ! Component: 3300 - total flux cleaned = -0.00195827 Jy ! Component: 3350 - total flux cleaned = -0.00182446 Jy ! Component: 3400 - total flux cleaned = -0.00171833 Jy ! Component: 3450 - total flux cleaned = -0.001692 Jy ! Component: 3500 - total flux cleaned = -0.00157408 Jy ! Component: 3550 - total flux cleaned = -0.00147009 Jy ! Component: 3600 - total flux cleaned = -0.00141838 Jy ! Component: 3650 - total flux cleaned = -0.00135408 Jy ! Component: 3700 - total flux cleaned = -0.00123925 Jy ! Component: 3750 - total flux cleaned = -0.00113802 Jy ! Component: 3800 - total flux cleaned = -0.00110018 Jy ! Component: 3850 - total flux cleaned = -0.00105009 Jy ! Component: 3900 - total flux cleaned = -0.000925759 Jy ! Component: 3950 - total flux cleaned = -0.00090108 Jy ! Component: 4000 - total flux cleaned = -0.000839512 Jy ! Component: 4050 - total flux cleaned = -0.000705009 Jy ! Total flux subtracted in 4096 components = -0.000680817 Jy ! Clean residual min=-0.000724 max=0.000742 Jy/beam ! Clean residual mean=0.000003 rms=0.000217 Jy/beam ! Combined flux in latest and established models = 0.0638768 Jy keep ! Adding 271 model components to the UV plane model. ! The established model now contains 308 components and 0.0638768 Jy ![Exited script file: muppet] wmap "J0536-2005_S_2017_07_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.942 x 8.09 at -6.848 degrees (North through East) ! Clean map min=-0.0017296 max=0.059943 Jy/beam ! Writing clean map to FITS file: J0536-2005_S_2017_07_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0599428 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00021045 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.05325 1.05325 2.10651 4.21302 8.42604 16.8521 33.7042 67.4083 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.059 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.942 x 8.09 at -6.848 degrees (North through East) ! Clean map min=-0.0017296 max=0.059943 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0536-2005_S_2017_07_09_pus_uvs.log closed on Wed May 8 14:42:57 2019