! Started logfile: J0534-3950_S_2017_08_12_pus_uvs.log on Fri May 10 14:53:17 2019 obs J0534-3950_S_2017_08_12_pus_uva.fits ! Reading UV FITS file: J0534-3950_S_2017_08_12_pus_uva.fits ! AN table 1: 135 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.392593 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0534-3950 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 594 lines of history. ! ! Reading 9540 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0534-3950_S_2017_08_12_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 481 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 481 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 481 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1161 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.992117Jy sigma=0.006385 ! Fit after self-cal, rms=0.931403Jy sigma=0.006003 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.162 mas, bmaj=6.401 mas, bpa=-1.877 degrees ! Estimated noise=1996.66 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0553501 Jy ! Component: 100 - total flux cleaned = 0.0678049 Jy ! Total flux subtracted in 100 components = 0.0678049 Jy ! Clean residual min=-0.005070 max=0.006224 Jy/beam ! Clean residual mean=-0.000036 rms=0.001424 Jy/beam ! Combined flux in latest and established models = 0.0678049 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 0.0678049 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098226Jy sigma=0.000616 ! Fit after self-cal, rms=0.097555Jy sigma=0.000611 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.645 mas, bmaj=7.239 mas, bpa=-0.3889 degrees ! Estimated noise=1288.92 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00678275 Jy ! Component: 100 - total flux cleaned = 0.00977466 Jy ! Component: 150 - total flux cleaned = 0.0112459 Jy ! Component: 200 - total flux cleaned = 0.0116281 Jy ! Total flux subtracted in 200 components = 0.0116281 Jy ! Clean residual min=-0.003370 max=0.003212 Jy/beam ! Clean residual mean=-0.000035 rms=0.000877 Jy/beam ! Combined flux in latest and established models = 0.0794329 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 23 components and 0.0794329 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097118Jy sigma=0.000609 ! Fit after self-cal, rms=0.097099Jy sigma=0.000608 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.98 HN 1.00* KP 1.01 ! LA 1.01 MK 1.02 NL 1.00* OV 1.05 ! PT 1.04 SC 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.12 HN 1.00* KP 0.91 ! LA 0.91 MK 1.09 NL 1.00* OV 1.04 ! PT 1.00 SC 0.99 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.01 HN 1.00* KP 0.93 ! LA 0.93 MK 1.03 NL 1.00* OV 1.01 ! PT 1.02 SC 0.97 ! ! ! Correcting IF 4. ! A total of 189 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.097099Jy sigma=0.000608 ! Fit after self-cal, rms=0.096784Jy sigma=0.000610 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.668 mas, bmaj=7.21 mas, bpa=0.8044 degrees ! Estimated noise=1311.49 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000417656 Jy ! Component: 100 - total flux cleaned = 0.000393022 Jy ! Component: 150 - total flux cleaned = 0.000370581 Jy ! Component: 200 - total flux cleaned = 0.000328889 Jy ! Total flux subtracted in 200 components = 0.000328889 Jy ! Clean residual min=-0.002833 max=0.003113 Jy/beam ! Clean residual mean=-0.000033 rms=0.000812 Jy/beam ! Combined flux in latest and established models = 0.0797618 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 28 components and 0.0797618 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096770Jy sigma=0.000610 ! Fit after self-cal, rms=0.096737Jy sigma=0.000610 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096737Jy sigma=0.000610 ! Fit after self-cal, rms=0.096857Jy sigma=0.000610 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.667 mas, bmaj=7.167 mas, bpa=0.6917 degrees ! Estimated noise=1308.02 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000594946 Jy ! Component: 100 - total flux cleaned = 0.000656603 Jy ! Component: 150 - total flux cleaned = 0.000606797 Jy ! Component: 200 - total flux cleaned = 0.000565819 Jy ! Total flux subtracted in 200 components = 0.000565819 Jy ! Clean residual min=-0.002673 max=0.002949 Jy/beam ! Clean residual mean=-0.000039 rms=0.000758 Jy/beam ! Combined flux in latest and established models = 0.0803277 Jy selfcal ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 32 components and 0.0803277 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096841Jy sigma=0.000609 ! Fit after self-cal, rms=0.096866Jy sigma=0.000609 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.12771e-05 Jy ! Component: 100 - total flux cleaned = 1.28472e-06 Jy ! Component: 150 - total flux cleaned = -1.60986e-05 Jy ! Component: 200 - total flux cleaned = -4.54508e-05 Jy ! Total flux subtracted in 200 components = -4.54508e-05 Jy ! Clean residual min=-0.002726 max=0.002942 Jy/beam ! Clean residual mean=-0.000041 rms=0.000776 Jy/beam ! Combined flux in latest and established models = 0.0802822 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 35 components and 0.0802822 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096858Jy sigma=0.000609 ! Fit after self-cal, rms=0.096858Jy sigma=0.000609 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096858Jy sigma=0.000609 ! Fit after self-cal, rms=0.096838Jy sigma=0.000609 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.66 mas, bmaj=7.13 mas, bpa=0.7449 degrees ! Estimated noise=1306.5 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000497434 Jy ! Component: 100 - total flux cleaned = 0.00053421 Jy ! Component: 150 - total flux cleaned = 0.000503728 Jy ! Component: 200 - total flux cleaned = 0.000490925 Jy ! Total flux subtracted in 200 components = 0.000490925 Jy ! Clean residual min=-0.002684 max=0.002985 Jy/beam ! Clean residual mean=-0.000041 rms=0.000771 Jy/beam ! Combined flux in latest and established models = 0.0807731 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 36 components and 0.0807731 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096831Jy sigma=0.000609 ! Fit after self-cal, rms=0.096842Jy sigma=0.000609 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.39326e-05 Jy ! Component: 100 - total flux cleaned = -6.70799e-05 Jy ! Component: 150 - total flux cleaned = -7.86301e-05 Jy ! Component: 200 - total flux cleaned = -8.85018e-05 Jy ! Total flux subtracted in 200 components = -8.85018e-05 Jy ! Clean residual min=-0.002672 max=0.002979 Jy/beam ! Clean residual mean=-0.000042 rms=0.000775 Jy/beam ! Combined flux in latest and established models = 0.0806846 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 36 components and 0.0806846 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096839Jy sigma=0.000609 ! Fit after self-cal, rms=0.096839Jy sigma=0.000609 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096839Jy sigma=0.000609 ! Fit after self-cal, rms=0.096783Jy sigma=0.000609 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.769 mas, bmaj=25.68 mas, bpa=1.881 degrees ! Estimated noise=1851.17 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000412621 Jy ! Component: 100 - total flux cleaned = 0.000482979 Jy ! Component: 150 - total flux cleaned = 0.000483072 Jy ! Component: 200 - total flux cleaned = 0.000483433 Jy ! Total flux subtracted in 200 components = 0.000483433 Jy ! Clean residual min=-0.003759 max=0.003864 Jy/beam ! Clean residual mean=-0.000097 rms=0.001237 Jy/beam ! Combined flux in latest and established models = 0.0811681 Jy selfcal ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 39 components and 0.0811681 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096785Jy sigma=0.000609 ! Fit after self-cal, rms=0.096785Jy sigma=0.000609 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.56316e-06 Jy ! Component: 100 - total flux cleaned = -6.63754e-06 Jy ! Component: 150 - total flux cleaned = -6.7371e-06 Jy ! Component: 200 - total flux cleaned = -6.88255e-06 Jy ! Total flux subtracted in 200 components = -6.88255e-06 Jy ! Clean residual min=-0.003738 max=0.003823 Jy/beam ! Clean residual mean=-0.000099 rms=0.001239 Jy/beam ! Combined flux in latest and established models = 0.0811612 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 41 components and 0.0811612 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096785Jy sigma=0.000609 ! Fit after self-cal, rms=0.096783Jy sigma=0.000609 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.655 mas, bmaj=7.103 mas, bpa=0.7948 degrees ! Estimated noise=1305.25 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.655 x 7.103 at 0.7948 degrees (North through East) ! Clean map min=-0.0025885 max=0.071892 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.167 mas, bmaj=6.298 mas, bpa=-1.126 degrees ! Estimated noise=2252.86 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0549206 Jy ! Component: 100 - total flux cleaned = 0.0675809 Jy ! Component: 150 - total flux cleaned = 0.0734745 Jy ! Component: 200 - total flux cleaned = 0.0763509 Jy ! Total flux subtracted in 200 components = 0.0763509 Jy ! Clean residual min=-0.004306 max=0.004555 Jy/beam ! Clean residual mean=-0.000026 rms=0.001080 Jy/beam ! Combined flux in latest and established models = 0.0763508 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.0763508 Jy ! Inverting map and beam ! Estimated beam: bmin=2.655 mas, bmaj=7.103 mas, bpa=0.7948 degrees ! Estimated noise=1305.25 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.003149 Jy ! Component: 100 - total flux cleaned = 0.00388035 Jy ! Component: 150 - total flux cleaned = 0.00404584 Jy ! Component: 200 - total flux cleaned = 0.00414773 Jy ! Total flux subtracted in 200 components = 0.00414773 Jy ! Clean residual min=-0.002760 max=0.002965 Jy/beam ! Clean residual mean=-0.000046 rms=0.000796 Jy/beam ! Combined flux in latest and established models = 0.0804985 Jy ! Adding 12 model components to the UV plane model. ! The established model now contains 26 components and 0.0804985 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.769 mas, bmaj=25.68 mas, bpa=1.881 degrees ! Estimated noise=1851.17 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00058923 Jy ! Component: 100 - total flux cleaned = 0.000615876 Jy ! Component: 150 - total flux cleaned = 0.000615615 Jy ! Component: 200 - total flux cleaned = 0.000615798 Jy ! Total flux subtracted in 200 components = 0.000615798 Jy ! Clean residual min=-0.003645 max=0.003820 Jy/beam ! Clean residual mean=-0.000098 rms=0.001248 Jy/beam ! Combined flux in latest and established models = 0.0811143 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.55152e-07 Jy ! Component: 100 - total flux cleaned = 5.929e-07 Jy ! Component: 150 - total flux cleaned = 9.35015e-07 Jy ! Component: 200 - total flux cleaned = 1.2262e-06 Jy ! Total flux subtracted in 200 components = 1.2262e-06 Jy ! Clean residual min=-0.003666 max=0.003824 Jy/beam ! Clean residual mean=-0.000098 rms=0.001247 Jy/beam ! Combined flux in latest and established models = 0.0811156 Jy ! Adding 10 model components to the UV plane model. ! The established model now contains 36 components and 0.0811156 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.655 mas, bmaj=7.103 mas, bpa=0.7948 degrees ! Estimated noise=1305.25 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000360923 Jy ! Component: 100 - total flux cleaned = -0.000312233 Jy ! Component: 150 - total flux cleaned = -0.000334392 Jy ! Component: 200 - total flux cleaned = -0.00033477 Jy ! Total flux subtracted in 200 components = -0.00033477 Jy ! Clean residual min=-0.002676 max=0.002933 Jy/beam ! Clean residual mean=-0.000044 rms=0.000785 Jy/beam ! Combined flux in latest and established models = 0.0807808 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 41 components and 0.0807808 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096793Jy sigma=0.000609 ! Fit after self-cal, rms=0.096769Jy sigma=0.000609 wmodel J0534-3950_S_2017_08_12_pus_map.mod ! Writing 41 model components to file: J0534-3950_S_2017_08_12_pus_map.mod wobs J0534-3950_S_2017_08_12_pus_uvs.fits ! Writing UV FITS file: J0534-3950_S_2017_08_12_pus_uvs.fits wwins J0534-3950_S_2017_08_12_pus_map.win ! wwins: Wrote 1 windows to J0534-3950_S_2017_08_12_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000755918 Jy ! Component: 100 - total flux cleaned = 0.00104186 Jy ! Component: 150 - total flux cleaned = 0.00113189 Jy ! Component: 200 - total flux cleaned = 0.00113293 Jy ! Component: 250 - total flux cleaned = 0.00105465 Jy ! Component: 300 - total flux cleaned = 0.0009796 Jy ! Component: 350 - total flux cleaned = 0.000836545 Jy ! Component: 400 - total flux cleaned = 0.000768935 Jy ! Component: 450 - total flux cleaned = 0.000735209 Jy ! Component: 500 - total flux cleaned = 0.000703138 Jy ! Component: 550 - total flux cleaned = 0.000612245 Jy ! Component: 600 - total flux cleaned = 0.000439351 Jy ! Component: 650 - total flux cleaned = 0.000328602 Jy ! Component: 700 - total flux cleaned = 0.000219756 Jy ! Component: 750 - total flux cleaned = 6.39229e-05 Jy ! Component: 800 - total flux cleaned = -6.11166e-05 Jy ! Component: 850 - total flux cleaned = -0.000133675 Jy ! Component: 900 - total flux cleaned = -0.00018108 Jy ! Component: 950 - total flux cleaned = -0.000294524 Jy ! Component: 1000 - total flux cleaned = -0.000338778 Jy ! Component: 1050 - total flux cleaned = -0.000382122 Jy ! Component: 1100 - total flux cleaned = -0.000361761 Jy ! Component: 1150 - total flux cleaned = -0.000383681 Jy ! Component: 1200 - total flux cleaned = -0.000444083 Jy ! Component: 1250 - total flux cleaned = -0.000443869 Jy ! Component: 1300 - total flux cleaned = -0.000443356 Jy ! Component: 1350 - total flux cleaned = -0.000443226 Jy ! Component: 1400 - total flux cleaned = -0.00044289 Jy ! Component: 1450 - total flux cleaned = -0.000442872 Jy ! Component: 1500 - total flux cleaned = -0.000425743 Jy ! Component: 1550 - total flux cleaned = -0.000408991 Jy ! Component: 1600 - total flux cleaned = -0.000392164 Jy ! Component: 1650 - total flux cleaned = -0.000292348 Jy ! Component: 1700 - total flux cleaned = -0.000226975 Jy ! Component: 1750 - total flux cleaned = -0.000130397 Jy ! Component: 1800 - total flux cleaned = -8.27269e-05 Jy ! Component: 1850 - total flux cleaned = -4.50584e-06 Jy ! Component: 1900 - total flux cleaned = 5.74048e-05 Jy ! Component: 1950 - total flux cleaned = 0.00013372 Jy ! Component: 2000 - total flux cleaned = 0.000133459 Jy ! Component: 2050 - total flux cleaned = 0.000148436 Jy ! Component: 2100 - total flux cleaned = 0.000221753 Jy ! Component: 2150 - total flux cleaned = 0.000250594 Jy ! Component: 2200 - total flux cleaned = 0.000207692 Jy ! Component: 2250 - total flux cleaned = 0.000236157 Jy ! Component: 2300 - total flux cleaned = 0.000264251 Jy ! Component: 2350 - total flux cleaned = 0.000278296 Jy ! Component: 2400 - total flux cleaned = 0.000292045 Jy ! Component: 2450 - total flux cleaned = 0.000332589 Jy ! Component: 2500 - total flux cleaned = 0.000359196 Jy ! Component: 2550 - total flux cleaned = 0.000359121 Jy ! Component: 2600 - total flux cleaned = 0.00039845 Jy ! Component: 2650 - total flux cleaned = 0.000437223 Jy ! Component: 2700 - total flux cleaned = 0.000462739 Jy ! Component: 2750 - total flux cleaned = 0.000488063 Jy ! Component: 2800 - total flux cleaned = 0.000513178 Jy ! Component: 2850 - total flux cleaned = 0.000500685 Jy ! Component: 2900 - total flux cleaned = 0.000562483 Jy ! Component: 2950 - total flux cleaned = 0.000562359 Jy ! Component: 3000 - total flux cleaned = 0.000574541 Jy ! Component: 3050 - total flux cleaned = 0.000586676 Jy ! Component: 3100 - total flux cleaned = 0.000586628 Jy ! Component: 3150 - total flux cleaned = 0.000598634 Jy ! Component: 3200 - total flux cleaned = 0.000610666 Jy ! Component: 3250 - total flux cleaned = 0.000634645 Jy ! Component: 3300 - total flux cleaned = 0.000670429 Jy ! Component: 3350 - total flux cleaned = 0.000694139 Jy ! Component: 3400 - total flux cleaned = 0.000717803 Jy ! Component: 3450 - total flux cleaned = 0.000753212 Jy ! Component: 3500 - total flux cleaned = 0.000811986 Jy ! Component: 3550 - total flux cleaned = 0.000858923 Jy ! Component: 3600 - total flux cleaned = 0.000905743 Jy ! Component: 3650 - total flux cleaned = 0.000975795 Jy ! Component: 3700 - total flux cleaned = 0.000975791 Jy ! Component: 3750 - total flux cleaned = 0.00105723 Jy ! Component: 3800 - total flux cleaned = 0.00108052 Jy ! Component: 3850 - total flux cleaned = 0.00115003 Jy ! Component: 3900 - total flux cleaned = 0.00116159 Jy ! Component: 3950 - total flux cleaned = 0.00123092 Jy ! Component: 4000 - total flux cleaned = 0.00126556 Jy ! Component: 4050 - total flux cleaned = 0.00132325 Jy ! Total flux subtracted in 4096 components = 0.00136943 Jy ! Clean residual min=-0.000705 max=0.000710 Jy/beam ! Clean residual mean=0.000001 rms=0.000184 Jy/beam ! Combined flux in latest and established models = 0.0821502 Jy keep ! Adding 231 model components to the UV plane model. ! The established model now contains 272 components and 0.0821502 Jy ![Exited script file: muppet] wmap "J0534-3950_S_2017_08_12_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.655 x 7.103 at 0.7948 degrees (North through East) ! Clean map min=-0.0015018 max=0.07263 Jy/beam ! Writing clean map to FITS file: J0534-3950_S_2017_08_12_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0726301 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000184331 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.761384 0.761384 1.52277 3.04553 6.09107 12.1821 24.3643 48.7285 97.4571 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.072 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.655 x 7.103 at 0.7948 degrees (North through East) ! Clean map min=-0.0015018 max=0.07263 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0534-3950_S_2017_08_12_pus_uvs.log closed on Fri May 10 14:53:21 2019