! Started logfile: J0534-3747_S_2017_10_09_pus_uvs.log on Sun May 12 13:05:16 2019 obs J0534-3747_S_2017_10_09_pus_uva.fits ! Reading UV FITS file: J0534-3747_S_2017_10_09_pus_uva.fits ! AN table 1: 73 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.567352 visibilities/baseline/integration-bin. ! Found source: J0534-3747 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 496 lines of history. ! ! Reading 5964 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0534-3747_S_2017_10_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 166 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 224 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 224 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 447 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.811284Jy sigma=0.005126 ! Fit after self-cal, rms=0.769563Jy sigma=0.004855 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.639 mas, bmaj=23.3 mas, bpa=-12.04 degrees ! Estimated noise=3208.14 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.167978 Jy ! Component: 100 - total flux cleaned = 0.245861 Jy ! Total flux subtracted in 100 components = 0.245861 Jy ! Clean residual min=-0.032399 max=0.063801 Jy/beam ! Clean residual mean=-0.001283 rms=0.014875 Jy/beam ! Combined flux in latest and established models = 0.245861 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 34 components and 0.245861 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.233890Jy sigma=0.001361 ! Fit after self-cal, rms=0.231649Jy sigma=0.001351 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.037 mas, bmaj=29.42 mas, bpa=-12.58 degrees ! Estimated noise=1859.58 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.10754 Jy ! Component: 100 - total flux cleaned = 0.170409 Jy ! Component: 150 - total flux cleaned = 0.21081 Jy ! Component: 200 - total flux cleaned = 0.237059 Jy ! Total flux subtracted in 200 components = 0.237059 Jy ! Clean residual min=-0.030713 max=0.070084 Jy/beam ! Clean residual mean=-0.001321 rms=0.015032 Jy/beam ! Combined flux in latest and established models = 0.482919 Jy ! Performing phase self-cal ! Adding 56 model components to the UV plane model. ! The established model now contains 82 components and 0.482919 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.174735Jy sigma=0.000922 ! Fit after self-cal, rms=0.171304Jy sigma=0.000908 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.39 FD 0.86 HN 1.00* KP 1.09 ! LA 0.99 MK 0.95 NL 1.62 OV 1.00* ! PT 0.91 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.87 HN 1.00* KP 1.05 ! LA 0.92 MK 1.00 NL 2.21 OV 1.00* ! PT 0.88 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.87 HN 1.00* KP 0.96 ! LA 0.72 MK 1.07 NL 2.47 OV 1.00* ! PT 0.87 ! ! ! Correcting IF 4. ! A total of 210 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* ! ! ! Fit before self-cal, rms=0.171304Jy sigma=0.000908 ! Fit after self-cal, rms=0.228408Jy sigma=0.000746 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.132 mas, bmaj=32.05 mas, bpa=-13 degrees ! Estimated noise=2016.68 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00540176 Jy ! Component: 100 - total flux cleaned = -0.00488858 Jy ! Component: 150 - total flux cleaned = -0.00439881 Jy ! Component: 200 - total flux cleaned = -0.00396552 Jy ! Total flux subtracted in 200 components = -0.00396552 Jy ! Clean residual min=-0.017130 max=0.036323 Jy/beam ! Clean residual mean=-0.000062 rms=0.007431 Jy/beam ! Combined flux in latest and established models = 0.478954 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 91 components and 0.478954 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.223925Jy sigma=0.000731 ! Fit after self-cal, rms=0.225005Jy sigma=0.000727 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.225005Jy sigma=0.000727 ! Fit after self-cal, rms=0.218685Jy sigma=0.000726 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.098 mas, bmaj=32.04 mas, bpa=-13.02 degrees ! Estimated noise=1960.86 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00647044 Jy ! Component: 100 - total flux cleaned = -0.00607575 Jy ! Component: 150 - total flux cleaned = -0.00567626 Jy ! Component: 200 - total flux cleaned = -0.00568697 Jy ! Total flux subtracted in 200 components = -0.00568697 Jy ! Clean residual min=-0.015903 max=0.031571 Jy/beam ! Clean residual mean=-0.000076 rms=0.006590 Jy/beam ! Combined flux in latest and established models = 0.473267 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 96 components and 0.473267 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.214931Jy sigma=0.000715 ! Fit after self-cal, rms=0.214720Jy sigma=0.000713 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-14, -24). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0179148 Jy ! Component: 100 - total flux cleaned = 0.0158682 Jy ! Component: 150 - total flux cleaned = 0.015321 Jy ! Component: 200 - total flux cleaned = 0.0143365 Jy ! Total flux subtracted in 200 components = 0.0143365 Jy ! Clean residual min=-0.009982 max=0.017192 Jy/beam ! Clean residual mean=0.000083 rms=0.004565 Jy/beam ! Combined flux in latest and established models = 0.487603 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 120 components and 0.487603 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.205208Jy sigma=0.000685 ! Fit after self-cal, rms=0.204487Jy sigma=0.000682 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.204487Jy sigma=0.000682 ! Fit after self-cal, rms=0.184379Jy sigma=0.000678 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.035 mas, bmaj=32.18 mas, bpa=-13.02 degrees ! Estimated noise=1889.75 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00522465 Jy ! Component: 100 - total flux cleaned = 0.00245399 Jy ! Component: 150 - total flux cleaned = 6.20558e-05 Jy ! Component: 200 - total flux cleaned = -0.0020451 Jy ! Total flux subtracted in 200 components = -0.0020451 Jy ! Clean residual min=-0.008693 max=0.010904 Jy/beam ! Clean residual mean=0.000021 rms=0.003327 Jy/beam ! Combined flux in latest and established models = 0.485558 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 139 components and 0.485558 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.180645Jy sigma=0.000669 ! Fit after self-cal, rms=0.180411Jy sigma=0.000668 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00160109 Jy ! Component: 100 - total flux cleaned = 0.000592009 Jy ! Component: 150 - total flux cleaned = -0.000320645 Jy ! Component: 200 - total flux cleaned = -0.000935743 Jy ! Total flux subtracted in 200 components = -0.000935743 Jy ! Clean residual min=-0.007868 max=0.009532 Jy/beam ! Clean residual mean=0.000011 rms=0.002972 Jy/beam ! Combined flux in latest and established models = 0.484622 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 168 components and 0.484622 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.178741Jy sigma=0.000665 ! Fit after self-cal, rms=0.178682Jy sigma=0.000665 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.178682Jy sigma=0.000665 ! Fit after self-cal, rms=0.171834Jy sigma=0.000665 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=10.93 mas, bmaj=38.23 mas, bpa=-0.04962 degrees ! Estimated noise=2505.35 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0018309 Jy ! Component: 100 - total flux cleaned = 0.000904908 Jy ! Component: 150 - total flux cleaned = 0.000502644 Jy ! Component: 200 - total flux cleaned = 0.000497657 Jy ! Total flux subtracted in 200 components = 0.000497657 Jy ! Clean residual min=-0.008813 max=0.010859 Jy/beam ! Clean residual mean=0.000022 rms=0.003671 Jy/beam ! Combined flux in latest and established models = 0.48512 Jy selfcal ! Performing phase self-cal ! Adding 49 model components to the UV plane model. ! The established model now contains 213 components and 0.48512 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.170688Jy sigma=0.000663 ! Fit after self-cal, rms=0.170572Jy sigma=0.000663 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00138743 Jy ! Component: 100 - total flux cleaned = 0.00137867 Jy ! Component: 150 - total flux cleaned = 0.00137143 Jy ! Component: 200 - total flux cleaned = 0.00136583 Jy ! Total flux subtracted in 200 components = 0.00136583 Jy ! Clean residual min=-0.008650 max=0.010180 Jy/beam ! Clean residual mean=0.000049 rms=0.003536 Jy/beam ! Combined flux in latest and established models = 0.486486 Jy ! Performing phase self-cal ! Adding 45 model components to the UV plane model. ! The established model now contains 241 components and 0.486486 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.169944Jy sigma=0.000662 ! Fit after self-cal, rms=0.169944Jy sigma=0.000662 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.038 mas, bmaj=32.09 mas, bpa=-12.99 degrees ! Estimated noise=1880.88 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.038 x 32.09 at -12.99 degrees (North through East) ! Clean map min=-0.029493 max=0.1655 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.566 mas, bmaj=25.83 mas, bpa=-12.59 degrees ! Estimated noise=3278.6 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.174499 Jy ! Component: 100 - total flux cleaned = 0.2666 Jy ! Component: 150 - total flux cleaned = 0.325019 Jy ! Component: 200 - total flux cleaned = 0.365096 Jy ! Total flux subtracted in 200 components = 0.365096 Jy ! Clean residual min=-0.015099 max=0.023330 Jy/beam ! Clean residual mean=-0.000498 rms=0.006873 Jy/beam ! Combined flux in latest and established models = 0.365096 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 45 model components to the UV plane model. ! The established model now contains 45 components and 0.365096 Jy ! Inverting map and beam ! Estimated beam: bmin=3.038 mas, bmaj=32.09 mas, bpa=-12.99 degrees ! Estimated noise=1880.88 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0525259 Jy ! Component: 100 - total flux cleaned = 0.0841719 Jy ! Component: 150 - total flux cleaned = 0.104337 Jy ! Component: 200 - total flux cleaned = 0.115327 Jy ! Total flux subtracted in 200 components = 0.115327 Jy ! Clean residual min=-0.009334 max=0.008756 Jy/beam ! Clean residual mean=-0.000037 rms=0.003372 Jy/beam ! Combined flux in latest and established models = 0.480424 Jy ! Adding 103 model components to the UV plane model. ! The established model now contains 145 components and 0.480423 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=10.93 mas, bmaj=38.23 mas, bpa=-0.04962 degrees ! Estimated noise=2505.35 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00822611 Jy ! Component: 100 - total flux cleaned = 0.00889535 Jy ! Component: 150 - total flux cleaned = 0.00964098 Jy ! Component: 200 - total flux cleaned = 0.0106654 Jy ! Total flux subtracted in 200 components = 0.0106654 Jy ! Clean residual min=-0.009717 max=0.009884 Jy/beam ! Clean residual mean=0.000120 rms=0.003461 Jy/beam ! Combined flux in latest and established models = 0.491089 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000821948 Jy ! Component: 100 - total flux cleaned = 0.00136485 Jy ! Component: 150 - total flux cleaned = 0.00171799 Jy ! Component: 200 - total flux cleaned = 0.00212828 Jy ! Total flux subtracted in 200 components = 0.00212828 Jy ! Clean residual min=-0.009623 max=0.009599 Jy/beam ! Clean residual mean=0.000161 rms=0.003376 Jy/beam ! Combined flux in latest and established models = 0.493217 Jy ! Adding 116 model components to the UV plane model. ! The established model now contains 256 components and 0.493217 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.038 mas, bmaj=32.09 mas, bpa=-12.99 degrees ! Estimated noise=1880.88 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000594263 Jy ! Component: 100 - total flux cleaned = -0.000247811 Jy ! Component: 150 - total flux cleaned = -0.000254068 Jy ! Component: 200 - total flux cleaned = -0.000254994 Jy ! Total flux subtracted in 200 components = -0.000254994 Jy ! Clean residual min=-0.007515 max=0.007659 Jy/beam ! Clean residual mean=0.000088 rms=0.002278 Jy/beam ! Combined flux in latest and established models = 0.492962 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 286 components and 0.492962 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.168326Jy sigma=0.000661 ! Fit after self-cal, rms=0.168067Jy sigma=0.000660 wmodel J0534-3747_S_2017_10_09_pus_map.mod ! Writing 286 model components to file: J0534-3747_S_2017_10_09_pus_map.mod wobs J0534-3747_S_2017_10_09_pus_uvs.fits ! Writing UV FITS file: J0534-3747_S_2017_10_09_pus_uvs.fits wwins J0534-3747_S_2017_10_09_pus_map.win ! wwins: Wrote 2 windows to J0534-3747_S_2017_10_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00103854 Jy ! Component: 100 - total flux cleaned = 0.00103669 Jy ! Component: 150 - total flux cleaned = 0.00104237 Jy ! Component: 200 - total flux cleaned = 0.00121754 Jy ! Component: 250 - total flux cleaned = 0.00121937 Jy ! Component: 300 - total flux cleaned = 0.000839033 Jy ! Component: 350 - total flux cleaned = 0.000768482 Jy ! Component: 400 - total flux cleaned = 0.000630596 Jy ! Component: 450 - total flux cleaned = 0.00056694 Jy ! Component: 500 - total flux cleaned = 0.000627956 Jy ! Component: 550 - total flux cleaned = 0.000628031 Jy ! Component: 600 - total flux cleaned = 0.000744008 Jy ! Component: 650 - total flux cleaned = 0.000579969 Jy ! Component: 700 - total flux cleaned = 0.000580462 Jy ! Component: 750 - total flux cleaned = 0.00052788 Jy ! Component: 800 - total flux cleaned = 0.000375627 Jy ! Component: 850 - total flux cleaned = 0.000374725 Jy ! Component: 900 - total flux cleaned = 0.000279186 Jy ! Component: 950 - total flux cleaned = 0.000279523 Jy ! Component: 1000 - total flux cleaned = 0.000369812 Jy ! Component: 1050 - total flux cleaned = 0.000368959 Jy ! Component: 1100 - total flux cleaned = 0.000368644 Jy ! Component: 1150 - total flux cleaned = 0.00024156 Jy ! Component: 1200 - total flux cleaned = 0.000158976 Jy ! Component: 1250 - total flux cleaned = 0.00011816 Jy ! Component: 1300 - total flux cleaned = 7.75313e-05 Jy ! Component: 1350 - total flux cleaned = -8.1244e-05 Jy ! Component: 1400 - total flux cleaned = -0.000198902 Jy ! Component: 1450 - total flux cleaned = -0.000353293 Jy ! Component: 1500 - total flux cleaned = -0.000506245 Jy ! Component: 1550 - total flux cleaned = -0.000619353 Jy ! Component: 1600 - total flux cleaned = -0.000731524 Jy ! Component: 1650 - total flux cleaned = -0.000879751 Jy ! Component: 1700 - total flux cleaned = -0.00102654 Jy ! Component: 1750 - total flux cleaned = -0.00128097 Jy ! Component: 1800 - total flux cleaned = -0.00149725 Jy ! Component: 1850 - total flux cleaned = -0.00167654 Jy ! Component: 1900 - total flux cleaned = -0.00189067 Jy ! Component: 1950 - total flux cleaned = -0.00213933 Jy ! Component: 2000 - total flux cleaned = -0.00235141 Jy ! Component: 2050 - total flux cleaned = -0.0024927 Jy ! Component: 2100 - total flux cleaned = -0.00266803 Jy ! Component: 2150 - total flux cleaned = -0.00273802 Jy ! Component: 2200 - total flux cleaned = -0.00277333 Jy ! Component: 2250 - total flux cleaned = -0.0027383 Jy ! Component: 2300 - total flux cleaned = -0.00273854 Jy ! Component: 2350 - total flux cleaned = -0.00270317 Jy ! Component: 2400 - total flux cleaned = -0.00277427 Jy ! Component: 2450 - total flux cleaned = -0.00277427 Jy ! Component: 2500 - total flux cleaned = -0.00281032 Jy ! Component: 2550 - total flux cleaned = -0.00288254 Jy ! Component: 2600 - total flux cleaned = -0.00299287 Jy ! Component: 2650 - total flux cleaned = -0.00310586 Jy ! Component: 2700 - total flux cleaned = -0.00318228 Jy ! Component: 2750 - total flux cleaned = -0.00325935 Jy ! Component: 2800 - total flux cleaned = -0.00337862 Jy ! Component: 2850 - total flux cleaned = -0.00350083 Jy ! Component: 2900 - total flux cleaned = -0.00354257 Jy ! Component: 2950 - total flux cleaned = -0.0036269 Jy ! Component: 3000 - total flux cleaned = -0.00371322 Jy ! Component: 3050 - total flux cleaned = -0.00375803 Jy ! Component: 3100 - total flux cleaned = -0.00389262 Jy ! Component: 3150 - total flux cleaned = -0.00393917 Jy ! Component: 3200 - total flux cleaned = -0.00398592 Jy ! Component: 3250 - total flux cleaned = -0.00408286 Jy ! Component: 3300 - total flux cleaned = -0.00413315 Jy ! Component: 3350 - total flux cleaned = -0.00418358 Jy ! Component: 3400 - total flux cleaned = -0.00423543 Jy ! Component: 3450 - total flux cleaned = -0.00434133 Jy ! Component: 3500 - total flux cleaned = -0.00439571 Jy ! Component: 3550 - total flux cleaned = -0.00450733 Jy ! Component: 3600 - total flux cleaned = -0.00456589 Jy ! Component: 3650 - total flux cleaned = -0.00462506 Jy ! Component: 3700 - total flux cleaned = -0.00468458 Jy ! Component: 3750 - total flux cleaned = -0.00480825 Jy ! Component: 3800 - total flux cleaned = -0.00487145 Jy ! Component: 3850 - total flux cleaned = -0.00493671 Jy ! Component: 3900 - total flux cleaned = -0.00506988 Jy ! Component: 3950 - total flux cleaned = -0.00513805 Jy ! Component: 4000 - total flux cleaned = -0.00520687 Jy ! Component: 4050 - total flux cleaned = -0.00527779 Jy ! Total flux subtracted in 4096 components = -0.00542295 Jy ! Clean residual min=-0.003987 max=0.003950 Jy/beam ! Clean residual mean=0.000029 rms=0.001157 Jy/beam ! Combined flux in latest and established models = 0.487539 Jy keep ! Adding 282 model components to the UV plane model. ! The established model now contains 568 components and 0.487539 Jy ![Exited script file: muppet] wmap "J0534-3747_S_2017_10_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.038 x 32.09 at -12.99 degrees (North through East) ! Clean map min=-0.0089528 max=0.18415 Jy/beam ! Writing clean map to FITS file: J0534-3747_S_2017_10_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.184148 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.0011784 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.91975 1.91975 3.8395 7.67899 15.358 30.716 61.4319 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0035 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.184 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.038 x 32.09 at -12.99 degrees (North through East) ! Clean map min=-0.0089528 max=0.18415 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0534-3747_S_2017_10_09_pus_uvs.log closed on Sun May 12 13:05:22 2019