! Started logfile: J0534+1927_S_2017_09_26_pus_uvs.log on Sat May 11 12:54:53 2019 obs J0534+1927_S_2017_09_26_pus_uva.fits ! Reading UV FITS file: J0534+1927_S_2017_09_26_pus_uva.fits ! AN table 1: 294 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.772014 visibilities/baseline/integration-bin. ! Found source: J0534+1927 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 674 lines of history. ! ! Reading 32684 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0534+1927_S_2017_09_26_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 304 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 304 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 376 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1469 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.981794Jy sigma=0.009083 ! Fit after self-cal, rms=0.941363Jy sigma=0.008714 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.999 mas, bmaj=9.634 mas, bpa=-22.49 degrees ! Estimated noise=1042.78 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.04299 Jy ! Component: 100 - total flux cleaned = 0.0640247 Jy ! Total flux subtracted in 100 components = 0.0640247 Jy ! Clean residual min=-0.013154 max=0.015710 Jy/beam ! Clean residual mean=-0.000275 rms=0.005709 Jy/beam ! Combined flux in latest and established models = 0.0640247 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 26 components and 0.0640247 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.144712Jy sigma=0.001434 ! Fit after self-cal, rms=0.144093Jy sigma=0.001429 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.84 mas, bmaj=10.48 mas, bpa=-20.94 degrees ! Estimated noise=479.041 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.038604 Jy ! Component: 100 - total flux cleaned = 0.0671379 Jy ! Component: 150 - total flux cleaned = 0.0885493 Jy ! Component: 200 - total flux cleaned = 0.104627 Jy ! Total flux subtracted in 200 components = 0.104627 Jy ! Clean residual min=-0.023753 max=0.028196 Jy/beam ! Clean residual mean=-0.000568 rms=0.011194 Jy/beam ! Combined flux in latest and established models = 0.168652 Jy ! Performing phase self-cal ! Adding 57 model components to the UV plane model. ! The established model now contains 74 components and 0.168652 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.130893Jy sigma=0.001291 ! Fit after self-cal, rms=0.129739Jy sigma=0.001282 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.38 FD 1.00* HN 0.91 KP 1.44 ! LA 0.54 MK 1.45 NL 2.62 OV 2.92 ! PT 0.50 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.31 FD 1.00* HN 0.90 KP 1.37 ! LA 0.56 MK 1.48 NL 2.88 OV 3.32 ! PT 0.49 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.00* HN 0.84 KP 1.38 ! LA 0.58 MK 1.55 NL 2.56 OV 3.98 ! PT 0.51 ! ! ! Correcting IF 4. ! A total of 405 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.61 KP 1.00* ! LA 0.95 MK 0.62 NL 1.00* OV 1.21 ! PT 0.96 ! ! ! Fit before self-cal, rms=0.129739Jy sigma=0.001282 ! Fit after self-cal, rms=0.216525Jy sigma=0.000954 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.185 mas, bmaj=10.83 mas, bpa=-19.06 degrees ! Estimated noise=517.458 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00313368 Jy ! Component: 100 - total flux cleaned = 0.00346407 Jy ! Component: 150 - total flux cleaned = 0.00356816 Jy ! Component: 200 - total flux cleaned = 0.00356671 Jy ! Total flux subtracted in 200 components = 0.00356671 Jy ! Clean residual min=-0.020109 max=0.022136 Jy/beam ! Clean residual mean=-0.000289 rms=0.007528 Jy/beam ! Combined flux in latest and established models = 0.172219 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 88 components and 0.172219 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.216028Jy sigma=0.000956 ! Fit after self-cal, rms=0.223632Jy sigma=0.000940 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.223632Jy sigma=0.000940 ! Fit after self-cal, rms=0.311770Jy sigma=0.000691 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.309 mas, bmaj=10.23 mas, bpa=-17.78 degrees ! Estimated noise=511.666 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00146702 Jy ! Component: 100 - total flux cleaned = 0.00133962 Jy ! Component: 150 - total flux cleaned = 0.00139 Jy ! Component: 200 - total flux cleaned = 0.00143343 Jy ! Total flux subtracted in 200 components = 0.00143343 Jy ! Clean residual min=-0.005871 max=0.007685 Jy/beam ! Clean residual mean=0.000011 rms=0.001970 Jy/beam ! Combined flux in latest and established models = 0.173652 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 92 components and 0.173652 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.311662Jy sigma=0.000691 ! Fit after self-cal, rms=0.312924Jy sigma=0.000688 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000101321 Jy ! Component: 100 - total flux cleaned = -0.000103023 Jy ! Component: 150 - total flux cleaned = -0.000264991 Jy ! Component: 200 - total flux cleaned = -0.000397909 Jy ! Total flux subtracted in 200 components = -0.000397909 Jy ! Clean residual min=-0.005693 max=0.006720 Jy/beam ! Clean residual mean=0.000009 rms=0.001837 Jy/beam ! Combined flux in latest and established models = 0.173254 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 97 components and 0.173254 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.312855Jy sigma=0.000688 ! Fit after self-cal, rms=0.312876Jy sigma=0.000688 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.312876Jy sigma=0.000688 ! Fit after self-cal, rms=0.316807Jy sigma=0.000687 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.317 mas, bmaj=10.02 mas, bpa=-18.98 degrees ! Estimated noise=501.702 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00123813 Jy ! Component: 100 - total flux cleaned = 0.00105668 Jy ! Component: 150 - total flux cleaned = 0.000947541 Jy ! Component: 200 - total flux cleaned = 0.000916404 Jy ! Total flux subtracted in 200 components = 0.000916404 Jy ! Clean residual min=-0.005411 max=0.006690 Jy/beam ! Clean residual mean=0.000010 rms=0.001776 Jy/beam ! Combined flux in latest and established models = 0.174171 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 99 components and 0.174171 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.316733Jy sigma=0.000687 ! Fit after self-cal, rms=0.316723Jy sigma=0.000687 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000315236 Jy ! Component: 100 - total flux cleaned = 0.000151199 Jy ! Component: 150 - total flux cleaned = 1.81725e-05 Jy ! Component: 200 - total flux cleaned = -0.000127045 Jy ! Total flux subtracted in 200 components = -0.000127045 Jy ! Clean residual min=-0.005592 max=0.006471 Jy/beam ! Clean residual mean=0.000008 rms=0.001778 Jy/beam ! Combined flux in latest and established models = 0.174043 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 101 components and 0.174044 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.316670Jy sigma=0.000687 ! Fit after self-cal, rms=0.316663Jy sigma=0.000687 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.316663Jy sigma=0.000687 ! Fit after self-cal, rms=0.318059Jy sigma=0.000686 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.316 mas, bmaj=11.37 mas, bpa=-27.4 degrees ! Estimated noise=530.243 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0010769 Jy ! Component: 100 - total flux cleaned = 0.000922028 Jy ! Component: 150 - total flux cleaned = 0.000763441 Jy ! Component: 200 - total flux cleaned = 0.000639681 Jy ! Total flux subtracted in 200 components = 0.000639681 Jy ! Clean residual min=-0.007575 max=0.009419 Jy/beam ! Clean residual mean=0.000013 rms=0.002762 Jy/beam ! Combined flux in latest and established models = 0.174683 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 106 components and 0.174683 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.317977Jy sigma=0.000686 ! Fit after self-cal, rms=0.318029Jy sigma=0.000686 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000309452 Jy ! Component: 100 - total flux cleaned = 0.000215745 Jy ! Component: 150 - total flux cleaned = 6.3191e-05 Jy ! Component: 200 - total flux cleaned = -2.58963e-05 Jy ! Total flux subtracted in 200 components = -2.58963e-05 Jy ! Clean residual min=-0.007575 max=0.009338 Jy/beam ! Clean residual mean=0.000012 rms=0.002766 Jy/beam ! Combined flux in latest and established models = 0.174657 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 109 components and 0.174657 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.317968Jy sigma=0.000686 ! Fit after self-cal, rms=0.318000Jy sigma=0.000686 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.32 mas, bmaj=9.946 mas, bpa=-20.16 degrees ! Estimated noise=495.323 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.32 x 9.946 at -20.16 degrees (North through East) ! Clean map min=-0.0055175 max=0.062958 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.38 mas, bmaj=9.055 mas, bpa=-20.9 degrees ! Estimated noise=1081.68 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0440397 Jy ! Component: 100 - total flux cleaned = 0.0702923 Jy ! Component: 150 - total flux cleaned = 0.0901107 Jy ! Component: 200 - total flux cleaned = 0.105872 Jy ! Total flux subtracted in 200 components = 0.105872 Jy ! Clean residual min=-0.009483 max=0.010258 Jy/beam ! Clean residual mean=-0.000116 rms=0.003062 Jy/beam ! Combined flux in latest and established models = 0.105872 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 33 model components to the UV plane model. ! The established model now contains 33 components and 0.105872 Jy ! Inverting map and beam ! Estimated beam: bmin=4.32 mas, bmaj=9.946 mas, bpa=-20.16 degrees ! Estimated noise=495.323 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0231473 Jy ! Component: 100 - total flux cleaned = 0.0380829 Jy ! Component: 150 - total flux cleaned = 0.0478267 Jy ! Component: 200 - total flux cleaned = 0.0542523 Jy ! Total flux subtracted in 200 components = 0.0542523 Jy ! Clean residual min=-0.006846 max=0.005210 Jy/beam ! Clean residual mean=-0.000049 rms=0.002138 Jy/beam ! Combined flux in latest and established models = 0.160125 Jy ! Adding 72 model components to the UV plane model. ! The established model now contains 90 components and 0.160125 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.316 mas, bmaj=11.37 mas, bpa=-27.4 degrees ! Estimated noise=530.243 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00640001 Jy ! Component: 100 - total flux cleaned = 0.00969058 Jy ! Component: 150 - total flux cleaned = 0.01142 Jy ! Component: 200 - total flux cleaned = 0.0123377 Jy ! Total flux subtracted in 200 components = 0.0123377 Jy ! Clean residual min=-0.007891 max=0.009158 Jy/beam ! Clean residual mean=-0.000002 rms=0.002810 Jy/beam ! Combined flux in latest and established models = 0.172462 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000487707 Jy ! Component: 100 - total flux cleaned = 0.00061174 Jy ! Component: 150 - total flux cleaned = 0.000654731 Jy ! Component: 200 - total flux cleaned = 0.000704929 Jy ! Total flux subtracted in 200 components = 0.000704929 Jy ! Clean residual min=-0.007796 max=0.009286 Jy/beam ! Clean residual mean=0.000002 rms=0.002804 Jy/beam ! Combined flux in latest and established models = 0.173167 Jy ! Adding 53 model components to the UV plane model. ! The established model now contains 130 components and 0.173167 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.32 mas, bmaj=9.946 mas, bpa=-20.16 degrees ! Estimated noise=495.323 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000234987 Jy ! Component: 100 - total flux cleaned = -0.000235617 Jy ! Component: 150 - total flux cleaned = -0.00027396 Jy ! Component: 200 - total flux cleaned = -0.000274668 Jy ! Total flux subtracted in 200 components = -0.000274668 Jy ! Clean residual min=-0.005266 max=0.006087 Jy/beam ! Clean residual mean=0.000000 rms=0.001774 Jy/beam ! Combined flux in latest and established models = 0.172892 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 138 components and 0.172892 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.317901Jy sigma=0.000687 ! Fit after self-cal, rms=0.317842Jy sigma=0.000686 wmodel J0534+1927_S_2017_09_26_pus_map.mod ! Writing 138 model components to file: J0534+1927_S_2017_09_26_pus_map.mod wobs J0534+1927_S_2017_09_26_pus_uvs.fits ! Writing UV FITS file: J0534+1927_S_2017_09_26_pus_uvs.fits wwins J0534+1927_S_2017_09_26_pus_map.win ! wwins: Wrote 1 windows to J0534+1927_S_2017_09_26_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00155931 Jy ! Component: 100 - total flux cleaned = 0.00225538 Jy ! Component: 150 - total flux cleaned = 0.00262323 Jy ! Component: 200 - total flux cleaned = 0.00305744 Jy ! Component: 250 - total flux cleaned = 0.00330386 Jy ! Component: 300 - total flux cleaned = 0.00338492 Jy ! Component: 350 - total flux cleaned = 0.00353728 Jy ! Component: 400 - total flux cleaned = 0.00375718 Jy ! Component: 450 - total flux cleaned = 0.00382859 Jy ! Component: 500 - total flux cleaned = 0.00396936 Jy ! Component: 550 - total flux cleaned = 0.00417221 Jy ! Component: 600 - total flux cleaned = 0.00436777 Jy ! Component: 650 - total flux cleaned = 0.00436747 Jy ! Component: 700 - total flux cleaned = 0.00436694 Jy ! Component: 750 - total flux cleaned = 0.00424659 Jy ! Component: 800 - total flux cleaned = 0.00430522 Jy ! Component: 850 - total flux cleaned = 0.00424802 Jy ! Component: 900 - total flux cleaned = 0.00430399 Jy ! Component: 950 - total flux cleaned = 0.00424803 Jy ! Component: 1000 - total flux cleaned = 0.00430159 Jy ! Component: 1050 - total flux cleaned = 0.00430141 Jy ! Component: 1100 - total flux cleaned = 0.00430139 Jy ! Component: 1150 - total flux cleaned = 0.00420094 Jy ! Component: 1200 - total flux cleaned = 0.00440047 Jy ! Component: 1250 - total flux cleaned = 0.00439983 Jy ! Component: 1300 - total flux cleaned = 0.00435249 Jy ! Component: 1350 - total flux cleaned = 0.00449363 Jy ! Component: 1400 - total flux cleaned = 0.00449264 Jy ! Component: 1450 - total flux cleaned = 0.0044927 Jy ! Component: 1500 - total flux cleaned = 0.00453717 Jy ! Component: 1550 - total flux cleaned = 0.00453737 Jy ! Component: 1600 - total flux cleaned = 0.00462375 Jy ! Component: 1650 - total flux cleaned = 0.00462283 Jy ! Component: 1700 - total flux cleaned = 0.00458172 Jy ! Component: 1750 - total flux cleaned = 0.00462272 Jy ! Component: 1800 - total flux cleaned = 0.0046227 Jy ! Component: 1850 - total flux cleaned = 0.00458357 Jy ! Component: 1900 - total flux cleaned = 0.00462282 Jy ! Component: 1950 - total flux cleaned = 0.00469964 Jy ! Component: 2000 - total flux cleaned = 0.00469959 Jy ! Component: 2050 - total flux cleaned = 0.00477368 Jy ! Component: 2100 - total flux cleaned = 0.00477315 Jy ! Component: 2150 - total flux cleaned = 0.00473718 Jy ! Component: 2200 - total flux cleaned = 0.00477292 Jy ! Component: 2250 - total flux cleaned = 0.00484251 Jy ! Component: 2300 - total flux cleaned = 0.00491174 Jy ! Component: 2350 - total flux cleaned = 0.00487667 Jy ! Component: 2400 - total flux cleaned = 0.00491063 Jy ! Component: 2450 - total flux cleaned = 0.00487673 Jy ! Component: 2500 - total flux cleaned = 0.00481084 Jy ! Component: 2550 - total flux cleaned = 0.00487606 Jy ! Component: 2600 - total flux cleaned = 0.00494034 Jy ! Component: 2650 - total flux cleaned = 0.0049085 Jy ! Component: 2700 - total flux cleaned = 0.00487774 Jy ! Component: 2750 - total flux cleaned = 0.00490892 Jy ! Component: 2800 - total flux cleaned = 0.00493915 Jy ! Component: 2850 - total flux cleaned = 0.0049085 Jy ! Component: 2900 - total flux cleaned = 0.00490826 Jy ! Component: 2950 - total flux cleaned = 0.0049671 Jy ! Component: 3000 - total flux cleaned = 0.00496703 Jy ! Component: 3050 - total flux cleaned = 0.00493879 Jy ! Component: 3100 - total flux cleaned = 0.00493896 Jy ! Component: 3150 - total flux cleaned = 0.00488248 Jy ! Component: 3200 - total flux cleaned = 0.00479847 Jy ! Component: 3250 - total flux cleaned = 0.00474263 Jy ! Component: 3300 - total flux cleaned = 0.00463341 Jy ! Component: 3350 - total flux cleaned = 0.00449861 Jy ! Component: 3400 - total flux cleaned = 0.00425812 Jy ! Component: 3450 - total flux cleaned = 0.00409939 Jy ! Component: 3500 - total flux cleaned = 0.00381057 Jy ! Component: 3550 - total flux cleaned = 0.00370653 Jy ! Component: 3600 - total flux cleaned = 0.00339707 Jy ! Component: 3650 - total flux cleaned = 0.00326946 Jy ! Component: 3700 - total flux cleaned = 0.00314238 Jy ! Component: 3750 - total flux cleaned = 0.00296627 Jy ! Component: 3800 - total flux cleaned = 0.00286637 Jy ! Component: 3850 - total flux cleaned = 0.0027178 Jy ! Component: 3900 - total flux cleaned = 0.00259501 Jy ! Component: 3950 - total flux cleaned = 0.00247274 Jy ! Component: 4000 - total flux cleaned = 0.00225468 Jy ! Component: 4050 - total flux cleaned = 0.00225458 Jy ! Total flux subtracted in 4096 components = 0.00203954 Jy ! Clean residual min=-0.001405 max=0.001333 Jy/beam ! Clean residual mean=0.000007 rms=0.000513 Jy/beam ! Combined flux in latest and established models = 0.174932 Jy keep ! Adding 495 model components to the UV plane model. ! The established model now contains 633 components and 0.174932 Jy ![Exited script file: muppet] wmap "J0534+1927_S_2017_09_26_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.32 x 9.946 at -20.16 degrees (North through East) ! Clean map min=-0.0040997 max=0.062879 Jy/beam ! Writing clean map to FITS file: J0534+1927_S_2017_09_26_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0628793 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000510461 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -2.43543 2.43543 4.87086 9.74172 19.4834 38.9669 77.9338 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0015 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.062 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.32 x 9.946 at -20.16 degrees (North through East) ! Clean map min=-0.0040997 max=0.062879 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0534+1927_S_2017_09_26_pus_uvs.log closed on Sat May 11 12:54:59 2019