! Started logfile: J0534+1927_S_2017_02_19_pus_uvs.log on Sat May 4 18:43:31 2019 obs J0534+1927_S_2017_02_19_pus_uva.fits ! Reading UV FITS file: J0534+1927_S_2017_02_19_pus_uva.fits ! AN table 1: 218 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.725484 visibilities/baseline/integration-bin. ! Found source: J0534+1927 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 482 lines of history. ! ! Reading 28468 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0534+1927_S_2017_02_19_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 342 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 372 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 313 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 928 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.999256Jy sigma=0.008764 ! Fit after self-cal, rms=0.958018Jy sigma=0.008418 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.682 mas, bmaj=7.321 mas, bpa=-12.84 degrees ! Estimated noise=809.659 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0335799 Jy ! Component: 100 - total flux cleaned = 0.0422022 Jy ! Total flux subtracted in 100 components = 0.0422022 Jy ! Clean residual min=-0.003872 max=0.004236 Jy/beam ! Clean residual mean=-0.000001 rms=0.001196 Jy/beam ! Combined flux in latest and established models = 0.0422021 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.0422021 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086388Jy sigma=0.000698 ! Fit after self-cal, rms=0.084963Jy sigma=0.000685 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.3 mas, bmaj=7.647 mas, bpa=-10.13 degrees ! Estimated noise=532.895 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00772843 Jy ! Component: 100 - total flux cleaned = 0.0127477 Jy ! Component: 150 - total flux cleaned = 0.0164374 Jy ! Component: 200 - total flux cleaned = 0.0192057 Jy ! Total flux subtracted in 200 components = 0.0192057 Jy ! Clean residual min=-0.004302 max=0.004168 Jy/beam ! Clean residual mean=0.000004 rms=0.001215 Jy/beam ! Combined flux in latest and established models = 0.0614078 Jy ! Performing phase self-cal ! Adding 63 model components to the UV plane model. ! The established model now contains 73 components and 0.0614078 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083974Jy sigma=0.000678 ! Fit after self-cal, rms=0.083733Jy sigma=0.000677 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.18 FD 1.02 HN 1.22 KP 0.71 ! LA 0.79 MK 1.14 NL 0.99 OV 1.22 ! PT 1.00* SC 0.94 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.17 FD 1.10 HN 1.10 KP 0.78 ! LA 0.82 MK 1.05 NL 1.13 OV 1.21 ! PT 1.00* SC 1.05 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.06 HN 0.98 KP 0.74 ! LA 0.82 MK 1.06 NL 1.12 OV 1.14 ! PT 1.00* SC 1.04 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 1.09 HN 0.86 KP 1.00* ! LA 0.82 MK 0.82 NL 1.00* OV 0.85 ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.083733Jy sigma=0.000677 ! Fit after self-cal, rms=0.081419Jy sigma=0.000671 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.37 mas, bmaj=7.861 mas, bpa=-10.26 degrees ! Estimated noise=523.44 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00189566 Jy ! Component: 100 - total flux cleaned = 0.00296094 Jy ! Component: 150 - total flux cleaned = 0.00359571 Jy ! Component: 200 - total flux cleaned = 0.00383415 Jy ! Total flux subtracted in 200 components = 0.00383415 Jy ! Clean residual min=-0.004006 max=0.003913 Jy/beam ! Clean residual mean=0.000020 rms=0.001104 Jy/beam ! Combined flux in latest and established models = 0.065242 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 77 components and 0.065242 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081374Jy sigma=0.000670 ! Fit after self-cal, rms=0.081698Jy sigma=0.000667 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081698Jy sigma=0.000667 ! Fit after self-cal, rms=0.089654Jy sigma=0.000660 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.405 mas, bmaj=7.814 mas, bpa=-11.01 degrees ! Estimated noise=537.345 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00188071 Jy ! Component: 100 - total flux cleaned = 0.00253747 Jy ! Component: 150 - total flux cleaned = 0.00285871 Jy ! Component: 200 - total flux cleaned = 0.00310656 Jy ! Total flux subtracted in 200 components = 0.00310656 Jy ! Clean residual min=-0.002872 max=0.004029 Jy/beam ! Clean residual mean=0.000030 rms=0.000874 Jy/beam ! Combined flux in latest and established models = 0.0683485 Jy selfcal ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 79 components and 0.0683485 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089626Jy sigma=0.000660 ! Fit after self-cal, rms=0.090347Jy sigma=0.000657 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000361455 Jy ! Component: 100 - total flux cleaned = 0.000614178 Jy ! Component: 150 - total flux cleaned = 0.000685269 Jy ! Component: 200 - total flux cleaned = 0.000788638 Jy ! Total flux subtracted in 200 components = 0.000788638 Jy ! Clean residual min=-0.002994 max=0.003499 Jy/beam ! Clean residual mean=0.000027 rms=0.000863 Jy/beam ! Combined flux in latest and established models = 0.0691372 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 85 components and 0.0691372 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090337Jy sigma=0.000657 ! Fit after self-cal, rms=0.090323Jy sigma=0.000657 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090323Jy sigma=0.000657 ! Fit after self-cal, rms=0.095144Jy sigma=0.000656 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.401 mas, bmaj=7.763 mas, bpa=-11.47 degrees ! Estimated noise=537.669 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00147607 Jy ! Component: 100 - total flux cleaned = 0.00185732 Jy ! Component: 150 - total flux cleaned = 0.00207618 Jy ! Component: 200 - total flux cleaned = 0.0021787 Jy ! Total flux subtracted in 200 components = 0.0021787 Jy ! Clean residual min=-0.002664 max=0.003474 Jy/beam ! Clean residual mean=0.000027 rms=0.000801 Jy/beam ! Combined flux in latest and established models = 0.0713159 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 86 components and 0.0713159 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095131Jy sigma=0.000655 ! Fit after self-cal, rms=0.095413Jy sigma=0.000655 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (25, 64). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00307862 Jy ! Component: 100 - total flux cleaned = 0.00463978 Jy ! Component: 150 - total flux cleaned = 0.00578833 Jy ! Component: 200 - total flux cleaned = 0.00649969 Jy ! Total flux subtracted in 200 components = 0.00649969 Jy ! Clean residual min=-0.002631 max=0.002988 Jy/beam ! Clean residual mean=0.000020 rms=0.000739 Jy/beam ! Combined flux in latest and established models = 0.0778155 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 125 components and 0.0778156 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095309Jy sigma=0.000654 ! Fit after self-cal, rms=0.095227Jy sigma=0.000653 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095227Jy sigma=0.000653 ! Fit after self-cal, rms=0.096157Jy sigma=0.000653 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.204 mas, bmaj=9.931 mas, bpa=-13.03 degrees ! Estimated noise=637.216 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00307596 Jy ! Component: 100 - total flux cleaned = 0.00488567 Jy ! Component: 150 - total flux cleaned = 0.00622335 Jy ! Component: 200 - total flux cleaned = 0.00716935 Jy ! Total flux subtracted in 200 components = 0.00716935 Jy ! Clean residual min=-0.003947 max=0.003594 Jy/beam ! Clean residual mean=0.000037 rms=0.001128 Jy/beam ! Combined flux in latest and established models = 0.0849849 Jy selfcal ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 157 components and 0.0849849 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096109Jy sigma=0.000652 ! Fit after self-cal, rms=0.096091Jy sigma=0.000652 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00191096 Jy ! Component: 100 - total flux cleaned = 0.00260419 Jy ! Component: 150 - total flux cleaned = 0.0031975 Jy ! Component: 200 - total flux cleaned = 0.00362192 Jy ! Total flux subtracted in 200 components = 0.00362192 Jy ! Clean residual min=-0.003790 max=0.003451 Jy/beam ! Clean residual mean=0.000035 rms=0.001140 Jy/beam ! Combined flux in latest and established models = 0.0886068 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 170 components and 0.0886068 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096076Jy sigma=0.000651 ! Fit after self-cal, rms=0.096049Jy sigma=0.000651 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.415 mas, bmaj=7.764 mas, bpa=-11.75 degrees ! Estimated noise=536.702 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.415 x 7.764 at -11.75 degrees (North through East) ! Clean map min=-0.0025585 max=0.04398 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.741 mas, bmaj=7.359 mas, bpa=-14.57 degrees ! Estimated noise=800.733 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0336482 Jy ! Component: 100 - total flux cleaned = 0.0442602 Jy ! Component: 150 - total flux cleaned = 0.0515344 Jy ! Component: 200 - total flux cleaned = 0.057383 Jy ! Total flux subtracted in 200 components = 0.057383 Jy ! Clean residual min=-0.003746 max=0.004219 Jy/beam ! Clean residual mean=0.000009 rms=0.000999 Jy/beam ! Combined flux in latest and established models = 0.057383 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 24 model components to the UV plane model. ! The established model now contains 24 components and 0.057383 Jy ! Inverting map and beam ! Estimated beam: bmin=3.415 mas, bmaj=7.764 mas, bpa=-11.75 degrees ! Estimated noise=536.702 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00593878 Jy ! Component: 100 - total flux cleaned = 0.0104015 Jy ! Component: 150 - total flux cleaned = 0.0139638 Jy ! Component: 200 - total flux cleaned = 0.0169012 Jy ! Total flux subtracted in 200 components = 0.0169012 Jy ! Clean residual min=-0.003132 max=0.002943 Jy/beam ! Clean residual mean=0.000017 rms=0.000815 Jy/beam ! Combined flux in latest and established models = 0.0742842 Jy ! Adding 45 model components to the UV plane model. ! The established model now contains 61 components and 0.0742842 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.204 mas, bmaj=9.931 mas, bpa=-13.03 degrees ! Estimated noise=637.216 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0042314 Jy ! Component: 100 - total flux cleaned = 0.00729985 Jy ! Component: 150 - total flux cleaned = 0.00965612 Jy ! Component: 200 - total flux cleaned = 0.0110881 Jy ! Total flux subtracted in 200 components = 0.0110881 Jy ! Clean residual min=-0.004444 max=0.003764 Jy/beam ! Clean residual mean=0.000033 rms=0.001199 Jy/beam ! Combined flux in latest and established models = 0.0853723 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00104786 Jy ! Component: 100 - total flux cleaned = 0.00191728 Jy ! Component: 150 - total flux cleaned = 0.00260082 Jy ! Component: 200 - total flux cleaned = 0.00317659 Jy ! Total flux subtracted in 200 components = 0.00317659 Jy ! Clean residual min=-0.003996 max=0.003518 Jy/beam ! Clean residual mean=0.000032 rms=0.001162 Jy/beam ! Combined flux in latest and established models = 0.0885488 Jy ! Adding 86 model components to the UV plane model. ! The established model now contains 126 components and 0.0885488 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.415 mas, bmaj=7.764 mas, bpa=-11.75 degrees ! Estimated noise=536.702 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000561859 Jy ! Component: 100 - total flux cleaned = 0.000386109 Jy ! Component: 150 - total flux cleaned = 0.000353759 Jy ! Component: 200 - total flux cleaned = 0.000354498 Jy ! Total flux subtracted in 200 components = 0.000354498 Jy ! Clean residual min=-0.002858 max=0.002463 Jy/beam ! Clean residual mean=0.000017 rms=0.000701 Jy/beam ! Combined flux in latest and established models = 0.0889033 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 145 components and 0.0889033 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096041Jy sigma=0.000651 ! Fit after self-cal, rms=0.095985Jy sigma=0.000651 wmodel J0534+1927_S_2017_02_19_pus_map.mod ! Writing 145 model components to file: J0534+1927_S_2017_02_19_pus_map.mod wobs J0534+1927_S_2017_02_19_pus_uvs.fits ! Writing UV FITS file: J0534+1927_S_2017_02_19_pus_uvs.fits wwins J0534+1927_S_2017_02_19_pus_map.win ! wwins: Wrote 2 windows to J0534+1927_S_2017_02_19_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000406463 Jy ! Component: 100 - total flux cleaned = 0.000962391 Jy ! Component: 150 - total flux cleaned = 0.00148536 Jy ! Component: 200 - total flux cleaned = 0.00202586 Jy ! Component: 250 - total flux cleaned = 0.00239711 Jy ! Component: 300 - total flux cleaned = 0.00275614 Jy ! Component: 350 - total flux cleaned = 0.00306946 Jy ! Component: 400 - total flux cleaned = 0.00344287 Jy ! Component: 450 - total flux cleaned = 0.00370693 Jy ! Component: 500 - total flux cleaned = 0.00393278 Jy ! Component: 550 - total flux cleaned = 0.00418518 Jy ! Component: 600 - total flux cleaned = 0.00427763 Jy ! Component: 650 - total flux cleaned = 0.00445931 Jy ! Component: 700 - total flux cleaned = 0.00445954 Jy ! Component: 750 - total flux cleaned = 0.00454664 Jy ! Component: 800 - total flux cleaned = 0.00466049 Jy ! Component: 850 - total flux cleaned = 0.00463246 Jy ! Component: 900 - total flux cleaned = 0.0045786 Jy ! Component: 950 - total flux cleaned = 0.00463356 Jy ! Component: 1000 - total flux cleaned = 0.00466057 Jy ! Component: 1050 - total flux cleaned = 0.00463484 Jy ! Component: 1100 - total flux cleaned = 0.00468569 Jy ! Component: 1150 - total flux cleaned = 0.00463521 Jy ! Component: 1200 - total flux cleaned = 0.00458585 Jy ! Component: 1250 - total flux cleaned = 0.0045859 Jy ! Component: 1300 - total flux cleaned = 0.00453818 Jy ! Component: 1350 - total flux cleaned = 0.00458565 Jy ! Component: 1400 - total flux cleaned = 0.00453893 Jy ! Component: 1450 - total flux cleaned = 0.00453906 Jy ! Component: 1500 - total flux cleaned = 0.00451633 Jy ! Component: 1550 - total flux cleaned = 0.00453914 Jy ! Component: 1600 - total flux cleaned = 0.00451686 Jy ! Component: 1650 - total flux cleaned = 0.00447276 Jy ! Component: 1700 - total flux cleaned = 0.00442961 Jy ! Component: 1750 - total flux cleaned = 0.00445068 Jy ! Component: 1800 - total flux cleaned = 0.00434569 Jy ! Component: 1850 - total flux cleaned = 0.00436638 Jy ! Component: 1900 - total flux cleaned = 0.00432509 Jy ! Component: 1950 - total flux cleaned = 0.00424433 Jy ! Component: 2000 - total flux cleaned = 0.00422454 Jy ! Component: 2050 - total flux cleaned = 0.00418542 Jy ! Component: 2100 - total flux cleaned = 0.00412699 Jy ! Component: 2150 - total flux cleaned = 0.00406968 Jy ! Component: 2200 - total flux cleaned = 0.00405068 Jy ! Component: 2250 - total flux cleaned = 0.0039754 Jy ! Component: 2300 - total flux cleaned = 0.00397565 Jy ! Component: 2350 - total flux cleaned = 0.00393868 Jy ! Component: 2400 - total flux cleaned = 0.00388402 Jy ! Component: 2450 - total flux cleaned = 0.00386602 Jy ! Component: 2500 - total flux cleaned = 0.00379423 Jy ! Component: 2550 - total flux cleaned = 0.00370569 Jy ! Component: 2600 - total flux cleaned = 0.0036179 Jy ! Component: 2650 - total flux cleaned = 0.00354827 Jy ! Component: 2700 - total flux cleaned = 0.00349656 Jy ! Component: 2750 - total flux cleaned = 0.00339424 Jy ! Component: 2800 - total flux cleaned = 0.00334351 Jy ! Component: 2850 - total flux cleaned = 0.00324293 Jy ! Component: 2900 - total flux cleaned = 0.00311034 Jy ! Component: 2950 - total flux cleaned = 0.00312657 Jy ! Component: 3000 - total flux cleaned = 0.00301251 Jy ! Component: 3050 - total flux cleaned = 0.00293203 Jy ! Component: 3100 - total flux cleaned = 0.00289998 Jy ! Component: 3150 - total flux cleaned = 0.00285241 Jy ! Component: 3200 - total flux cleaned = 0.00283679 Jy ! Component: 3250 - total flux cleaned = 0.00275888 Jy ! Component: 3300 - total flux cleaned = 0.00275899 Jy ! Component: 3350 - total flux cleaned = 0.00274346 Jy ! Component: 3400 - total flux cleaned = 0.00272836 Jy ! Component: 3450 - total flux cleaned = 0.00266805 Jy ! Component: 3500 - total flux cleaned = 0.00259352 Jy ! Component: 3550 - total flux cleaned = 0.00260839 Jy ! Component: 3600 - total flux cleaned = 0.00260827 Jy ! Component: 3650 - total flux cleaned = 0.0026081 Jy ! Component: 3700 - total flux cleaned = 0.00252102 Jy ! Component: 3750 - total flux cleaned = 0.00246345 Jy ! Component: 3800 - total flux cleaned = 0.00247793 Jy ! Component: 3850 - total flux cleaned = 0.00252034 Jy ! Component: 3900 - total flux cleaned = 0.00250632 Jy ! Component: 3950 - total flux cleaned = 0.00252026 Jy ! Component: 4000 - total flux cleaned = 0.00247869 Jy ! Component: 4050 - total flux cleaned = 0.00249244 Jy ! Total flux subtracted in 4096 components = 0.00247877 Jy ! Clean residual min=-0.000786 max=0.000779 Jy/beam ! Clean residual mean=0.000007 rms=0.000280 Jy/beam ! Combined flux in latest and established models = 0.0913821 Jy keep ! Adding 426 model components to the UV plane model. ! The established model now contains 571 components and 0.0913822 Jy ![Exited script file: muppet] wmap "J0534+1927_S_2017_02_19_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.415 x 7.764 at -11.75 degrees (North through East) ! Clean map min=-0.0017045 max=0.043899 Jy/beam ! Writing clean map to FITS file: J0534+1927_S_2017_02_19_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0438985 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000276894 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.89228 1.89228 3.78456 7.56912 15.1382 30.2765 60.5529 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.043 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.415 x 7.764 at -11.75 degrees (North through East) ! Clean map min=-0.0017045 max=0.043899 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0534+1927_S_2017_02_19_pus_uvs.log closed on Sat May 4 18:43:37 2019