! Started logfile: J0533+4822_S_2017_01_16_pus_uvs.log on Sun Apr 7 15:06:00 2019 obs J0533+4822_S_2017_01_16_pus_uva.fits ! Reading UV FITS file: J0533+4822_S_2017_01_16_pus_uva.fits ! AN table 1: 16 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.572222 visibilities/baseline/integration-bin. ! Found source: J0533+4822 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 622 lines of history. ! ! Reading 1648 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0533+4822_S_2017_01_16_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 38 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 38 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 38 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 68 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.535097Jy sigma=0.003969 ! Fit after self-cal, rms=0.524765Jy sigma=0.003930 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.083 mas, bmaj=7.591 mas, bpa=39.76 degrees ! Estimated noise=3077.54 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.404419 Jy ! Component: 100 - total flux cleaned = 0.495228 Jy ! Total flux subtracted in 100 components = 0.495228 Jy ! Clean residual min=-0.024661 max=0.032531 Jy/beam ! Clean residual mean=0.000134 rms=0.008163 Jy/beam ! Combined flux in latest and established models = 0.495227 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.495227 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.185158Jy sigma=0.001000 ! Fit after self-cal, rms=0.185246Jy sigma=0.001000 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.99 mas, bmaj=7.894 mas, bpa=37.13 degrees ! Estimated noise=2375.06 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0360606 Jy ! Component: 100 - total flux cleaned = 0.0538989 Jy ! Component: 150 - total flux cleaned = 0.0649581 Jy ! Component: 200 - total flux cleaned = 0.0721092 Jy ! Total flux subtracted in 200 components = 0.0721092 Jy ! Clean residual min=-0.020655 max=0.024369 Jy/beam ! Clean residual mean=0.000336 rms=0.006504 Jy/beam ! Combined flux in latest and established models = 0.567337 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 44 components and 0.567337 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.180317Jy sigma=0.000901 ! Fit after self-cal, rms=0.180423Jy sigma=0.000899 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 0.90 HN 1.00* KP 0.97 ! LA 1.04 MK 1.00* NL 0.89 OV 0.96 ! PT 1.06 SC 0.93 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.96 HN 1.00* KP 0.93 ! LA 1.00 MK 1.00* NL 1.00 OV 0.99 ! PT 1.07 SC 1.04 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 0.97 HN 1.00* KP 0.88 ! LA 0.99 MK 1.00* NL 1.02 OV 0.92 ! PT 1.04 SC 1.00 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.00 HN 1.00* KP 1.00* ! LA 1.11 MK 1.00* NL 1.00* OV 0.99 ! PT 1.07 SC 1.50 ! ! ! Fit before self-cal, rms=0.180423Jy sigma=0.000899 ! Fit after self-cal, rms=0.230465Jy sigma=0.000822 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=5.015 mas, bmaj=7.896 mas, bpa=36.8 degrees ! Estimated noise=2344.29 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00307725 Jy ! Component: 100 - total flux cleaned = -0.00455746 Jy ! Component: 150 - total flux cleaned = -0.00473345 Jy ! Component: 200 - total flux cleaned = -0.00473296 Jy ! Total flux subtracted in 200 components = -0.00473296 Jy ! Clean residual min=-0.020760 max=0.020519 Jy/beam ! Clean residual mean=0.000398 rms=0.005627 Jy/beam ! Combined flux in latest and established models = 0.562604 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 54 components and 0.562604 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.229846Jy sigma=0.000818 ! Fit after self-cal, rms=0.230293Jy sigma=0.000817 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.230293Jy sigma=0.000817 ! Fit after self-cal, rms=0.206261Jy sigma=0.000656 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=5.001 mas, bmaj=7.895 mas, bpa=37.06 degrees ! Estimated noise=2349.38 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00137606 Jy ! Component: 100 - total flux cleaned = 0.00137746 Jy ! Component: 150 - total flux cleaned = 0.0013756 Jy ! Component: 200 - total flux cleaned = 0.00131805 Jy ! Total flux subtracted in 200 components = 0.00131805 Jy ! Clean residual min=-0.007606 max=0.008400 Jy/beam ! Clean residual mean=-0.000000 rms=0.001758 Jy/beam ! Combined flux in latest and established models = 0.563922 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 64 components and 0.563922 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.206185Jy sigma=0.000654 ! Fit after self-cal, rms=0.207307Jy sigma=0.000654 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (10.5, 9). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00770617 Jy ! Component: 100 - total flux cleaned = 0.0117969 Jy ! Component: 150 - total flux cleaned = 0.0136579 Jy ! Component: 200 - total flux cleaned = 0.0141268 Jy ! Total flux subtracted in 200 components = 0.0141268 Jy ! Clean residual min=-0.006718 max=0.005636 Jy/beam ! Clean residual mean=-0.000011 rms=0.001393 Jy/beam ! Combined flux in latest and established models = 0.578048 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 98 components and 0.578048 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.207024Jy sigma=0.000647 ! Fit after self-cal, rms=0.207056Jy sigma=0.000646 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.207056Jy sigma=0.000646 ! Fit after self-cal, rms=0.206458Jy sigma=0.000646 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.988 mas, bmaj=7.881 mas, bpa=36.99 degrees ! Estimated noise=2350.01 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00347796 Jy ! Component: 100 - total flux cleaned = 0.00483437 Jy ! Component: 150 - total flux cleaned = 0.00498283 Jy ! Component: 200 - total flux cleaned = 0.00498322 Jy ! Total flux subtracted in 200 components = 0.00498322 Jy ! Clean residual min=-0.006022 max=0.004789 Jy/beam ! Clean residual mean=-0.000012 rms=0.001256 Jy/beam ! Combined flux in latest and established models = 0.583032 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 118 components and 0.583032 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.206392Jy sigma=0.000644 ! Fit after self-cal, rms=0.206452Jy sigma=0.000644 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00118953 Jy ! Component: 100 - total flux cleaned = 0.00118969 Jy ! Component: 150 - total flux cleaned = 0.00119029 Jy ! Component: 200 - total flux cleaned = 0.00118816 Jy ! Total flux subtracted in 200 components = 0.00118816 Jy ! Clean residual min=-0.005834 max=0.004445 Jy/beam ! Clean residual mean=-0.000013 rms=0.001216 Jy/beam ! Combined flux in latest and established models = 0.58422 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 131 components and 0.58422 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.206401Jy sigma=0.000643 ! Fit after self-cal, rms=0.206431Jy sigma=0.000643 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.206431Jy sigma=0.000643 ! Fit after self-cal, rms=0.206404Jy sigma=0.000643 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.73 mas, bmaj=10.14 mas, bpa=2.795 degrees ! Estimated noise=2562.6 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00219138 Jy ! Component: 100 - total flux cleaned = 0.00266575 Jy ! Component: 150 - total flux cleaned = 0.0026663 Jy ! Component: 200 - total flux cleaned = 0.00269822 Jy ! Total flux subtracted in 200 components = 0.00269822 Jy ! Clean residual min=-0.005452 max=0.004790 Jy/beam ! Clean residual mean=-0.000021 rms=0.001305 Jy/beam ! Combined flux in latest and established models = 0.586918 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 147 components and 0.586918 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.206378Jy sigma=0.000643 ! Fit after self-cal, rms=0.206362Jy sigma=0.000643 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000475406 Jy ! Component: 100 - total flux cleaned = 0.000415023 Jy ! Component: 150 - total flux cleaned = 0.000443143 Jy ! Component: 200 - total flux cleaned = 0.000467034 Jy ! Total flux subtracted in 200 components = 0.000467034 Jy ! Clean residual min=-0.005433 max=0.004541 Jy/beam ! Clean residual mean=-0.000022 rms=0.001293 Jy/beam ! Combined flux in latest and established models = 0.587385 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 157 components and 0.587385 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.206349Jy sigma=0.000642 ! Fit after self-cal, rms=0.206348Jy sigma=0.000642 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.985 mas, bmaj=7.882 mas, bpa=36.98 degrees ! Estimated noise=2350.6 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.985 x 7.882 at 36.98 degrees (North through East) ! Clean map min=-0.0053857 max=0.51262 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.206348Jy sigma=0.000642 ! Fit after self-cal, rms=0.215112Jy sigma=0.000590 ! Inverting map and beam ! Estimated beam: bmin=4.984 mas, bmaj=7.882 mas, bpa=36.94 degrees ! Estimated noise=2351.02 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.95804e-05 Jy ! Component: 100 - total flux cleaned = -0.000140616 Jy ! Component: 150 - total flux cleaned = -0.000136418 Jy ! Component: 200 - total flux cleaned = -0.000177269 Jy ! Total flux subtracted in 200 components = -0.000177269 Jy ! Clean residual min=-0.005371 max=0.004314 Jy/beam ! Clean residual mean=-0.000014 rms=0.001147 Jy/beam ! Combined flux in latest and established models = 0.587208 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 172 components and 0.587208 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.215039Jy sigma=0.000590 ! Fit after self-cal, rms=0.215077Jy sigma=0.000590 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00011673 Jy ! Component: 100 - total flux cleaned = 7.71871e-05 Jy ! Component: 150 - total flux cleaned = 3.9502e-05 Jy ! Component: 200 - total flux cleaned = 6.61033e-06 Jy ! Total flux subtracted in 200 components = 6.61033e-06 Jy ! Clean residual min=-0.005292 max=0.004299 Jy/beam ! Clean residual mean=-0.000014 rms=0.001136 Jy/beam ! Combined flux in latest and established models = 0.587214 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 176 components and 0.587214 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.215030Jy sigma=0.000590 ! Fit after self-cal, rms=0.215061Jy sigma=0.000590 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.215061Jy sigma=0.000590 ! Fit after self-cal, rms=0.214827Jy sigma=0.000589 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.09 mas, bmaj=7.603 mas, bpa=39.59 degrees ! Estimated noise=3021.6 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.396768 Jy ! Component: 100 - total flux cleaned = 0.486277 Jy ! Component: 150 - total flux cleaned = 0.520257 Jy ! Component: 200 - total flux cleaned = 0.538603 Jy ! Total flux subtracted in 200 components = 0.538603 Jy ! Clean residual min=-0.010176 max=0.011183 Jy/beam ! Clean residual mean=0.000002 rms=0.002539 Jy/beam ! Combined flux in latest and established models = 0.538603 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 29 model components to the UV plane model. ! The established model now contains 29 components and 0.538603 Jy ! Inverting map and beam ! Estimated beam: bmin=4.984 mas, bmaj=7.885 mas, bpa=36.92 degrees ! Estimated noise=2351.73 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0143527 Jy ! Component: 100 - total flux cleaned = 0.0236596 Jy ! Component: 150 - total flux cleaned = 0.030453 Jy ! Component: 200 - total flux cleaned = 0.0356173 Jy ! Total flux subtracted in 200 components = 0.0356173 Jy ! Clean residual min=-0.006485 max=0.005204 Jy/beam ! Clean residual mean=-0.000007 rms=0.001408 Jy/beam ! Combined flux in latest and established models = 0.57422 Jy ! Adding 55 model components to the UV plane model. ! The established model now contains 77 components and 0.57422 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.724 mas, bmaj=10.15 mas, bpa=3.407 degrees ! Estimated noise=2563.76 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00509669 Jy ! Component: 100 - total flux cleaned = 0.00849999 Jy ! Component: 150 - total flux cleaned = 0.0106501 Jy ! Component: 200 - total flux cleaned = 0.0116209 Jy ! Total flux subtracted in 200 components = 0.0116209 Jy ! Clean residual min=-0.005463 max=0.004404 Jy/beam ! Clean residual mean=-0.000023 rms=0.001327 Jy/beam ! Combined flux in latest and established models = 0.585841 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000784368 Jy ! Component: 100 - total flux cleaned = 0.00128589 Jy ! Component: 150 - total flux cleaned = 0.0014187 Jy ! Component: 200 - total flux cleaned = 0.00157695 Jy ! Total flux subtracted in 200 components = 0.00157695 Jy ! Clean residual min=-0.005291 max=0.004268 Jy/beam ! Clean residual mean=-0.000025 rms=0.001287 Jy/beam ! Combined flux in latest and established models = 0.587418 Jy ! Adding 53 model components to the UV plane model. ! The established model now contains 116 components and 0.587418 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.984 mas, bmaj=7.885 mas, bpa=36.92 degrees ! Estimated noise=2351.73 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000747323 Jy ! Component: 100 - total flux cleaned = -0.000553672 Jy ! Component: 150 - total flux cleaned = -0.00032371 Jy ! Component: 200 - total flux cleaned = -0.000164057 Jy ! Total flux subtracted in 200 components = -0.000164057 Jy ! Clean residual min=-0.005493 max=0.004327 Jy/beam ! Clean residual mean=-0.000015 rms=0.001158 Jy/beam ! Combined flux in latest and established models = 0.587254 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 140 components and 0.587254 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.214884Jy sigma=0.000590 ! Fit after self-cal, rms=0.214959Jy sigma=0.000590 wmodel J0533+4822_S_2017_01_16_pus_map.mod ! Writing 140 model components to file: J0533+4822_S_2017_01_16_pus_map.mod wobs J0533+4822_S_2017_01_16_pus_uvs.fits ! Writing UV FITS file: J0533+4822_S_2017_01_16_pus_uvs.fits wwins J0533+4822_S_2017_01_16_pus_map.win ! wwins: Wrote 2 windows to J0533+4822_S_2017_01_16_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00233442 Jy ! Component: 100 - total flux cleaned = -0.00289286 Jy ! Component: 150 - total flux cleaned = -0.00274449 Jy ! Component: 200 - total flux cleaned = -0.00288082 Jy ! Component: 250 - total flux cleaned = -0.00307853 Jy ! Component: 300 - total flux cleaned = -0.00307789 Jy ! Component: 350 - total flux cleaned = -0.00301869 Jy ! Component: 400 - total flux cleaned = -0.0029014 Jy ! Component: 450 - total flux cleaned = -0.00290262 Jy ! Component: 500 - total flux cleaned = -0.00301435 Jy ! Component: 550 - total flux cleaned = -0.00328425 Jy ! Component: 600 - total flux cleaned = -0.00354685 Jy ! Component: 650 - total flux cleaned = -0.00390589 Jy ! Component: 700 - total flux cleaned = -0.00420554 Jy ! Component: 750 - total flux cleaned = -0.00449879 Jy ! Component: 800 - total flux cleaned = -0.00464246 Jy ! Component: 850 - total flux cleaned = -0.00506556 Jy ! Component: 900 - total flux cleaned = -0.00529635 Jy ! Component: 950 - total flux cleaned = -0.0056591 Jy ! Component: 1000 - total flux cleaned = -0.00588259 Jy ! Component: 1050 - total flux cleaned = -0.00619152 Jy ! Component: 1100 - total flux cleaned = -0.00640908 Jy ! Component: 1150 - total flux cleaned = -0.0066242 Jy ! Component: 1200 - total flux cleaned = -0.00687926 Jy ! Component: 1250 - total flux cleaned = -0.00721496 Jy ! Component: 1300 - total flux cleaned = -0.00746387 Jy ! Component: 1350 - total flux cleaned = -0.00783341 Jy ! Component: 1400 - total flux cleaned = -0.008077 Jy ! Component: 1450 - total flux cleaned = -0.00839863 Jy ! Component: 1500 - total flux cleaned = -0.0086766 Jy ! Component: 1550 - total flux cleaned = -0.00887342 Jy ! Component: 1600 - total flux cleaned = -0.00914639 Jy ! Component: 1650 - total flux cleaned = -0.00933961 Jy ! Component: 1700 - total flux cleaned = -0.00968403 Jy ! Component: 1750 - total flux cleaned = -0.0100635 Jy ! Component: 1800 - total flux cleaned = -0.0101764 Jy ! Component: 1850 - total flux cleaned = -0.0104008 Jy ! Component: 1900 - total flux cleaned = -0.0106972 Jy ! Component: 1950 - total flux cleaned = -0.010918 Jy ! Component: 2000 - total flux cleaned = -0.0112103 Jy ! Component: 2050 - total flux cleaned = -0.011355 Jy ! Component: 2100 - total flux cleaned = -0.011607 Jy ! Component: 2150 - total flux cleaned = -0.0117499 Jy ! Component: 2200 - total flux cleaned = -0.0119629 Jy ! Component: 2250 - total flux cleaned = -0.0120685 Jy ! Component: 2300 - total flux cleaned = -0.012384 Jy ! Component: 2350 - total flux cleaned = -0.0124532 Jy ! Component: 2400 - total flux cleaned = -0.012626 Jy ! Component: 2450 - total flux cleaned = -0.0127634 Jy ! Component: 2500 - total flux cleaned = -0.0129342 Jy ! Component: 2550 - total flux cleaned = -0.0132056 Jy ! Component: 2600 - total flux cleaned = -0.0132728 Jy ! Component: 2650 - total flux cleaned = -0.0133735 Jy ! Component: 2700 - total flux cleaned = -0.0135733 Jy ! Component: 2750 - total flux cleaned = -0.0137058 Jy ! Component: 2800 - total flux cleaned = -0.0138704 Jy ! Component: 2850 - total flux cleaned = -0.0139687 Jy ! Component: 2900 - total flux cleaned = -0.0142292 Jy ! Component: 2950 - total flux cleaned = -0.0144557 Jy ! Component: 3000 - total flux cleaned = -0.01452 Jy ! Component: 3050 - total flux cleaned = -0.014776 Jy ! Component: 3100 - total flux cleaned = -0.0149034 Jy ! Component: 3150 - total flux cleaned = -0.0150301 Jy ! Component: 3200 - total flux cleaned = -0.0151564 Jy ! Component: 3250 - total flux cleaned = -0.0153759 Jy ! Component: 3300 - total flux cleaned = -0.0155008 Jy ! Component: 3350 - total flux cleaned = -0.0157804 Jy ! Component: 3400 - total flux cleaned = -0.015966 Jy ! Component: 3450 - total flux cleaned = -0.0160889 Jy ! Component: 3500 - total flux cleaned = -0.0163035 Jy ! Component: 3550 - total flux cleaned = -0.0165474 Jy ! Component: 3600 - total flux cleaned = -0.0165777 Jy ! Component: 3650 - total flux cleaned = -0.01688 Jy ! Component: 3700 - total flux cleaned = -0.0170606 Jy ! Component: 3750 - total flux cleaned = -0.0170906 Jy ! Component: 3800 - total flux cleaned = -0.0173 Jy ! Component: 3850 - total flux cleaned = -0.0174192 Jy ! Component: 3900 - total flux cleaned = -0.0175972 Jy ! Component: 3950 - total flux cleaned = -0.0178041 Jy ! Component: 4000 - total flux cleaned = -0.0179807 Jy ! Component: 4050 - total flux cleaned = -0.0181272 Jy ! Total flux subtracted in 4096 components = -0.0182735 Jy ! Clean residual min=-0.001616 max=0.001755 Jy/beam ! Clean residual mean=-0.000009 rms=0.000511 Jy/beam ! Combined flux in latest and established models = 0.56898 Jy keep ! Adding 220 model components to the UV plane model. ! The established model now contains 360 components and 0.56898 Jy ![Exited script file: muppet] wmap "J0533+4822_S_2017_01_16_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.984 x 7.885 at 36.92 degrees (North through East) ! Clean map min=-0.0039114 max=0.51045 Jy/beam ! Writing clean map to FITS file: J0533+4822_S_2017_01_16_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.510447 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000495543 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.291241 0.291241 0.582481 1.16496 2.32993 4.65985 9.3197 18.6394 37.2788 74.5576 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0014 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.51 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.984 x 7.885 at 36.92 degrees (North through East) ! Clean map min=-0.0039114 max=0.51045 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0533+4822_S_2017_01_16_pus_uvs.log closed on Sun Apr 7 15:06:06 2019