! Started logfile: J0533+4210_S_2017_01_16_pus_uvs.log on Sun Apr 7 15:05:53 2019 obs J0533+4210_S_2017_01_16_pus_uva.fits ! Reading UV FITS file: J0533+4210_S_2017_01_16_pus_uva.fits ! AN table 1: 172 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.782687 visibilities/baseline/integration-bin. ! Found source: J0533+4210 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 622 lines of history. ! ! Reading 24232 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0533+4210_S_2017_01_16_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 191 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 191 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 191 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 588 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.012293Jy sigma=0.008237 ! Fit after self-cal, rms=0.988759Jy sigma=0.008160 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.886 mas, bmaj=6.468 mas, bpa=10.55 degrees ! Estimated noise=866.414 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0519335 Jy ! Component: 100 - total flux cleaned = 0.0646003 Jy ! Total flux subtracted in 100 components = 0.0646003 Jy ! Clean residual min=-0.004418 max=0.011138 Jy/beam ! Clean residual mean=0.000033 rms=0.001368 Jy/beam ! Combined flux in latest and established models = 0.0646003 Jy ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 3 components and 0.0646003 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.369759Jy sigma=0.000692 ! Fit after self-cal, rms=0.369695Jy sigma=0.000692 ! Inverting map ! Added new window around map position (-19, 5.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0101125 Jy ! Component: 100 - total flux cleaned = 0.0158771 Jy ! Total flux subtracted in 100 components = 0.0158771 Jy ! Clean residual min=-0.003985 max=0.010006 Jy/beam ! Clean residual mean=0.000030 rms=0.001123 Jy/beam ! Combined flux in latest and established models = 0.0804773 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 19 components and 0.0804773 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.369316Jy sigma=0.000678 ! Fit after self-cal, rms=0.369297Jy sigma=0.000676 ! Inverting map ! Added new window around map position (-10, 4.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00913367 Jy ! Component: 100 - total flux cleaned = 0.014246 Jy ! Total flux subtracted in 100 components = 0.014246 Jy ! Clean residual min=-0.003480 max=0.003778 Jy/beam ! Clean residual mean=0.000022 rms=0.000861 Jy/beam ! Combined flux in latest and established models = 0.0947233 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 28 components and 0.0947233 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.369171Jy sigma=0.000665 ! Fit after self-cal, rms=0.369152Jy sigma=0.000664 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.649 mas, bmaj=6.92 mas, bpa=11.08 degrees ! Estimated noise=567.224 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00634695 Jy ! Component: 100 - total flux cleaned = 0.0103647 Jy ! Component: 150 - total flux cleaned = 0.0132615 Jy ! Component: 200 - total flux cleaned = 0.0154034 Jy ! Total flux subtracted in 200 components = 0.0154034 Jy ! Clean residual min=-0.002672 max=0.003941 Jy/beam ! Clean residual mean=0.000036 rms=0.000724 Jy/beam ! Combined flux in latest and established models = 0.110127 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 59 components and 0.110127 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.369101Jy sigma=0.000658 ! Fit after self-cal, rms=0.369088Jy sigma=0.000657 ! Inverting map ! Added new window around map position (-27, 5.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00411764 Jy ! Component: 100 - total flux cleaned = 0.00674588 Jy ! Component: 150 - total flux cleaned = 0.00872964 Jy ! Component: 200 - total flux cleaned = 0.0101742 Jy ! Total flux subtracted in 200 components = 0.0101742 Jy ! Clean residual min=-0.002182 max=0.002419 Jy/beam ! Clean residual mean=0.000028 rms=0.000591 Jy/beam ! Combined flux in latest and established models = 0.120301 Jy ! Performing phase self-cal ! Adding 54 model components to the UV plane model. ! The established model now contains 108 components and 0.120301 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.369068Jy sigma=0.000655 ! Fit after self-cal, rms=0.369053Jy sigma=0.000655 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.97 HN 0.96 KP 0.98 ! LA 1.00 MK 1.00* NL 0.85 OV 0.94 ! PT 1.00 SC 0.99 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.01 HN 1.01 KP 0.99 ! LA 0.92 MK 1.00* NL 0.99 OV 1.05 ! PT 1.02 SC 1.07 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.14 FD 1.04 HN 1.00 KP 1.03 ! LA 0.95 MK 1.00* NL 1.01 OV 0.93 ! PT 1.04 SC 1.02 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.04 HN 0.97 KP 1.00* ! LA 1.03 MK 1.00* NL 1.00* OV 0.95 ! PT 0.93 SC 0.66 ! ! ! Fit before self-cal, rms=0.369053Jy sigma=0.000655 ! Fit after self-cal, rms=0.249275Jy sigma=0.000653 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.665 mas, bmaj=6.952 mas, bpa=10.23 degrees ! Estimated noise=560.863 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00138805 Jy ! Component: 100 - total flux cleaned = 0.00224519 Jy ! Component: 150 - total flux cleaned = 0.00280568 Jy ! Component: 200 - total flux cleaned = 0.00310268 Jy ! Total flux subtracted in 200 components = 0.00310268 Jy ! Clean residual min=-0.001839 max=0.001659 Jy/beam ! Clean residual mean=0.000023 rms=0.000519 Jy/beam ! Combined flux in latest and established models = 0.123404 Jy ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 141 components and 0.123404 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.249249Jy sigma=0.000652 ! Fit after self-cal, rms=0.249239Jy sigma=0.000652 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.249239Jy sigma=0.000652 ! Fit after self-cal, rms=0.083889Jy sigma=0.000650 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.647 mas, bmaj=6.927 mas, bpa=10.22 degrees ! Estimated noise=560.748 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0013086 Jy ! Component: 100 - total flux cleaned = 0.00205648 Jy ! Component: 150 - total flux cleaned = 0.00232376 Jy ! Component: 200 - total flux cleaned = 0.00265564 Jy ! Total flux subtracted in 200 components = 0.00265564 Jy ! Clean residual min=-0.001415 max=0.001555 Jy/beam ! Clean residual mean=0.000001 rms=0.000382 Jy/beam ! Combined flux in latest and established models = 0.126059 Jy selfcal ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 167 components and 0.126059 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083862Jy sigma=0.000649 ! Fit after self-cal, rms=0.083961Jy sigma=0.000649 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000213736 Jy ! Component: 100 - total flux cleaned = 0.000466989 Jy ! Component: 150 - total flux cleaned = 0.000587544 Jy ! Component: 200 - total flux cleaned = 0.00071638 Jy ! Total flux subtracted in 200 components = 0.00071638 Jy ! Clean residual min=-0.001383 max=0.001536 Jy/beam ! Clean residual mean=0.000002 rms=0.000371 Jy/beam ! Combined flux in latest and established models = 0.126776 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 181 components and 0.126776 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083950Jy sigma=0.000649 ! Fit after self-cal, rms=0.083950Jy sigma=0.000649 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083950Jy sigma=0.000649 ! Fit after self-cal, rms=0.084316Jy sigma=0.000649 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.648 mas, bmaj=6.918 mas, bpa=10.03 degrees ! Estimated noise=559.499 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000646167 Jy ! Component: 100 - total flux cleaned = 0.000958496 Jy ! Component: 150 - total flux cleaned = 0.00118898 Jy ! Component: 200 - total flux cleaned = 0.00131018 Jy ! Total flux subtracted in 200 components = 0.00131018 Jy ! Clean residual min=-0.001368 max=0.001533 Jy/beam ! Clean residual mean=0.000001 rms=0.000359 Jy/beam ! Combined flux in latest and established models = 0.128086 Jy selfcal ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 191 components and 0.128086 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084306Jy sigma=0.000649 ! Fit after self-cal, rms=0.084329Jy sigma=0.000649 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000124649 Jy ! Component: 100 - total flux cleaned = 0.000192653 Jy ! Component: 150 - total flux cleaned = 0.000208866 Jy ! Component: 200 - total flux cleaned = 0.000253918 Jy ! Total flux subtracted in 200 components = 0.000253918 Jy ! Clean residual min=-0.001355 max=0.001525 Jy/beam ! Clean residual mean=0.000002 rms=0.000355 Jy/beam ! Combined flux in latest and established models = 0.12834 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 204 components and 0.12834 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084322Jy sigma=0.000649 ! Fit after self-cal, rms=0.084322Jy sigma=0.000649 ! Inverting map ! Added new window around map position (-62.5, 69.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000876499 Jy ! Component: 100 - total flux cleaned = 0.000772447 Jy ! Component: 150 - total flux cleaned = 0.000751509 Jy ! Component: 200 - total flux cleaned = 0.000809575 Jy ! Total flux subtracted in 200 components = 0.000809575 Jy ! Clean residual min=-0.001375 max=0.001365 Jy/beam ! Clean residual mean=0.000002 rms=0.000336 Jy/beam ! Combined flux in latest and established models = 0.129149 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 220 components and 0.129149 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084294Jy sigma=0.000648 ! Fit after self-cal, rms=0.084295Jy sigma=0.000648 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084295Jy sigma=0.000648 ! Fit after self-cal, rms=0.084408Jy sigma=0.000648 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.079 mas, bmaj=9.311 mas, bpa=-9.765 degrees ! Estimated noise=651.495 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000885291 Jy ! Component: 100 - total flux cleaned = 0.00118312 Jy ! Component: 150 - total flux cleaned = 0.00141247 Jy ! Component: 200 - total flux cleaned = 0.00157248 Jy ! Total flux subtracted in 200 components = 0.00157248 Jy ! Clean residual min=-0.001498 max=0.001356 Jy/beam ! Clean residual mean=0.000005 rms=0.000394 Jy/beam ! Combined flux in latest and established models = 0.130722 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 236 components and 0.130722 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084396Jy sigma=0.000648 ! Fit after self-cal, rms=0.084401Jy sigma=0.000648 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000171113 Jy ! Component: 100 - total flux cleaned = 0.000267176 Jy ! Component: 150 - total flux cleaned = 0.000301545 Jy ! Component: 200 - total flux cleaned = 0.000348788 Jy ! Total flux subtracted in 200 components = 0.000348788 Jy ! Clean residual min=-0.001480 max=0.001343 Jy/beam ! Clean residual mean=0.000005 rms=0.000386 Jy/beam ! Combined flux in latest and established models = 0.131071 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 247 components and 0.131071 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084395Jy sigma=0.000648 ! Fit after self-cal, rms=0.084393Jy sigma=0.000648 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.645 mas, bmaj=6.91 mas, bpa=9.949 degrees ! Estimated noise=559.009 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.645 x 6.91 at 9.949 degrees (North through East) ! Clean map min=-0.0013679 max=0.064135 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.866 mas, bmaj=6.429 mas, bpa=10.06 degrees ! Estimated noise=838.033 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0492008 Jy ! Component: 100 - total flux cleaned = 0.0665937 Jy ! Component: 150 - total flux cleaned = 0.0783432 Jy ! Component: 200 - total flux cleaned = 0.0870081 Jy ! Total flux subtracted in 200 components = 0.0870081 Jy ! Clean residual min=-0.003603 max=0.005488 Jy/beam ! Clean residual mean=0.000017 rms=0.000926 Jy/beam ! Combined flux in latest and established models = 0.0870081 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 22 model components to the UV plane model. ! The established model now contains 22 components and 0.0870081 Jy ! Inverting map and beam ! Estimated beam: bmin=4.645 mas, bmaj=6.91 mas, bpa=9.949 degrees ! Estimated noise=559.009 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00903821 Jy ! Component: 100 - total flux cleaned = 0.0156799 Jy ! Component: 150 - total flux cleaned = 0.0207734 Jy ! Component: 200 - total flux cleaned = 0.0247586 Jy ! Total flux subtracted in 200 components = 0.0247586 Jy ! Clean residual min=-0.002295 max=0.002484 Jy/beam ! Clean residual mean=0.000014 rms=0.000560 Jy/beam ! Combined flux in latest and established models = 0.111767 Jy ! Adding 69 model components to the UV plane model. ! The established model now contains 80 components and 0.111767 Jy ! Inverting map ! Added new window around map position (-34.5, 1.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00324884 Jy ! Component: 100 - total flux cleaned = 0.00594064 Jy ! Component: 150 - total flux cleaned = 0.00819859 Jy ! Component: 200 - total flux cleaned = 0.0101019 Jy ! Total flux subtracted in 200 components = 0.0101019 Jy ! Clean residual min=-0.001891 max=0.001487 Jy/beam ! Clean residual mean=0.000007 rms=0.000411 Jy/beam ! Combined flux in latest and established models = 0.121869 Jy ! Adding 58 model components to the UV plane model. ! The established model now contains 131 components and 0.121869 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.079 mas, bmaj=9.311 mas, bpa=-9.765 degrees ! Estimated noise=651.495 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00247219 Jy ! Component: 100 - total flux cleaned = 0.00426551 Jy ! Component: 150 - total flux cleaned = 0.00570607 Jy ! Component: 200 - total flux cleaned = 0.00689833 Jy ! Total flux subtracted in 200 components = 0.00689833 Jy ! Clean residual min=-0.001749 max=0.001585 Jy/beam ! Clean residual mean=0.000008 rms=0.000422 Jy/beam ! Combined flux in latest and established models = 0.128767 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000729034 Jy ! Component: 100 - total flux cleaned = 0.00118797 Jy ! Component: 150 - total flux cleaned = 0.00150417 Jy ! Component: 200 - total flux cleaned = 0.00170662 Jy ! Total flux subtracted in 200 components = 0.00170662 Jy ! Clean residual min=-0.001623 max=0.001527 Jy/beam ! Clean residual mean=0.000006 rms=0.000394 Jy/beam ! Combined flux in latest and established models = 0.130474 Jy ! Adding 150 model components to the UV plane model. ! The established model now contains 262 components and 0.130473 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.645 mas, bmaj=6.91 mas, bpa=9.949 degrees ! Estimated noise=559.009 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000229025 Jy ! Component: 100 - total flux cleaned = 0.000455381 Jy ! Component: 150 - total flux cleaned = 0.000634859 Jy ! Component: 200 - total flux cleaned = 0.000754138 Jy ! Total flux subtracted in 200 components = 0.000754138 Jy ! Clean residual min=-0.001440 max=0.001299 Jy/beam ! Clean residual mean=0.000002 rms=0.000327 Jy/beam ! Combined flux in latest and established models = 0.131228 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 288 components and 0.131228 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084394Jy sigma=0.000648 ! Fit after self-cal, rms=0.084387Jy sigma=0.000648 wmodel J0533+4210_S_2017_01_16_pus_map.mod ! Writing 288 model components to file: J0533+4210_S_2017_01_16_pus_map.mod wobs J0533+4210_S_2017_01_16_pus_uvs.fits ! Writing UV FITS file: J0533+4210_S_2017_01_16_pus_uvs.fits wwins J0533+4210_S_2017_01_16_pus_map.win ! wwins: Wrote 6 windows to J0533+4210_S_2017_01_16_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000210995 Jy ! Component: 100 - total flux cleaned = -0.000190156 Jy ! Component: 150 - total flux cleaned = -0.000128381 Jy ! Component: 200 - total flux cleaned = -0.000109357 Jy ! Component: 250 - total flux cleaned = -0.000109496 Jy ! Component: 300 - total flux cleaned = 1.27375e-06 Jy ! Component: 350 - total flux cleaned = 3.72252e-05 Jy ! Component: 400 - total flux cleaned = 0.000124678 Jy ! Component: 450 - total flux cleaned = 0.000124392 Jy ! Component: 500 - total flux cleaned = 0.000191535 Jy ! Component: 550 - total flux cleaned = 0.000306517 Jy ! Component: 600 - total flux cleaned = 0.000403146 Jy ! Component: 650 - total flux cleaned = 0.000371406 Jy ! Component: 700 - total flux cleaned = 0.000450566 Jy ! Component: 750 - total flux cleaned = 0.000543232 Jy ! Component: 800 - total flux cleaned = 0.000543095 Jy ! Component: 850 - total flux cleaned = 0.000587965 Jy ! Component: 900 - total flux cleaned = 0.000647496 Jy ! Component: 950 - total flux cleaned = 0.000662043 Jy ! Component: 1000 - total flux cleaned = 0.000763291 Jy ! Component: 1050 - total flux cleaned = 0.000806093 Jy ! Component: 1100 - total flux cleaned = 0.000792149 Jy ! Component: 1150 - total flux cleaned = 0.000945681 Jy ! Component: 1200 - total flux cleaned = 0.000931668 Jy ! Component: 1250 - total flux cleaned = 0.000986045 Jy ! Component: 1300 - total flux cleaned = 0.00103963 Jy ! Component: 1350 - total flux cleaned = 0.00107951 Jy ! Component: 1400 - total flux cleaned = 0.00111911 Jy ! Component: 1450 - total flux cleaned = 0.00107984 Jy ! Component: 1500 - total flux cleaned = 0.00111853 Jy ! Component: 1550 - total flux cleaned = 0.00116969 Jy ! Component: 1600 - total flux cleaned = 0.00118271 Jy ! Component: 1650 - total flux cleaned = 0.00129573 Jy ! Component: 1700 - total flux cleaned = 0.00132061 Jy ! Component: 1750 - total flux cleaned = 0.00139459 Jy ! Component: 1800 - total flux cleaned = 0.00145544 Jy ! Component: 1850 - total flux cleaned = 0.00149164 Jy ! Component: 1900 - total flux cleaned = 0.00147983 Jy ! Component: 1950 - total flux cleaned = 0.00156324 Jy ! Component: 2000 - total flux cleaned = 0.00163403 Jy ! Component: 2050 - total flux cleaned = 0.00161061 Jy ! Component: 2100 - total flux cleaned = 0.00165716 Jy ! Component: 2150 - total flux cleaned = 0.0017147 Jy ! Component: 2200 - total flux cleaned = 0.00174908 Jy ! Component: 2250 - total flux cleaned = 0.00180567 Jy ! Component: 2300 - total flux cleaned = 0.00181691 Jy ! Component: 2350 - total flux cleaned = 0.00183929 Jy ! Component: 2400 - total flux cleaned = 0.00188355 Jy ! Component: 2450 - total flux cleaned = 0.00192767 Jy ! Component: 2500 - total flux cleaned = 0.0019605 Jy ! Component: 2550 - total flux cleaned = 0.0019822 Jy ! Component: 2600 - total flux cleaned = 0.00201455 Jy ! Component: 2650 - total flux cleaned = 0.00201455 Jy ! Component: 2700 - total flux cleaned = 0.0020358 Jy ! Component: 2750 - total flux cleaned = 0.00204637 Jy ! Component: 2800 - total flux cleaned = 0.00206742 Jy ! Component: 2850 - total flux cleaned = 0.00213016 Jy ! Component: 2900 - total flux cleaned = 0.00207806 Jy ! Component: 2950 - total flux cleaned = 0.00214012 Jy ! Component: 3000 - total flux cleaned = 0.00217098 Jy ! Component: 3050 - total flux cleaned = 0.00217098 Jy ! Component: 3100 - total flux cleaned = 0.0022014 Jy ! Component: 3150 - total flux cleaned = 0.00223166 Jy ! Component: 3200 - total flux cleaned = 0.00227168 Jy ! Component: 3250 - total flux cleaned = 0.00224171 Jy ! Component: 3300 - total flux cleaned = 0.00227142 Jy ! Component: 3350 - total flux cleaned = 0.00224182 Jy ! Component: 3400 - total flux cleaned = 0.00230055 Jy ! Component: 3450 - total flux cleaned = 0.00230062 Jy ! Component: 3500 - total flux cleaned = 0.00232009 Jy ! Component: 3550 - total flux cleaned = 0.00232013 Jy ! Component: 3600 - total flux cleaned = 0.00233935 Jy ! Component: 3650 - total flux cleaned = 0.00232977 Jy ! Component: 3700 - total flux cleaned = 0.00235831 Jy ! Component: 3750 - total flux cleaned = 0.00232996 Jy ! Component: 3800 - total flux cleaned = 0.00235831 Jy ! Component: 3850 - total flux cleaned = 0.0023958 Jy ! Component: 3900 - total flux cleaned = 0.00241447 Jy ! Component: 3950 - total flux cleaned = 0.00241445 Jy ! Component: 4000 - total flux cleaned = 0.00240522 Jy ! Component: 4050 - total flux cleaned = 0.00242357 Jy ! Total flux subtracted in 4096 components = 0.00245094 Jy ! Clean residual min=-0.000574 max=0.000569 Jy/beam ! Clean residual mean=0.000000 rms=0.000174 Jy/beam ! Combined flux in latest and established models = 0.133679 Jy keep ! Adding 283 model components to the UV plane model. ! The established model now contains 571 components and 0.133678 Jy ![Exited script file: muppet] wmap "J0533+4210_S_2017_01_16_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.645 x 6.91 at 9.949 degrees (North through East) ! Clean map min=-0.00094948 max=0.063426 Jy/beam ! Writing clean map to FITS file: J0533+4210_S_2017_01_16_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0634257 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000172993 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.818247 0.818247 1.63649 3.27299 6.54597 13.0919 26.1839 52.3678 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.063 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.645 x 6.91 at 9.949 degrees (North through East) ! Clean map min=-0.00094948 max=0.063426 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0533+4210_S_2017_01_16_pus_uvs.log closed on Sun Apr 7 15:06:00 2019