! Started logfile: J0532-0307_S_2017_05_27_pus_uvs.log on Fri May 3 10:57:32 2019 obs J0532-0307_S_2017_05_27_pus_uva.fits ! Reading UV FITS file: J0532-0307_S_2017_05_27_pus_uva.fits ! AN table 1: 94 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.972104 visibilities/baseline/integration-bin. ! Found source: J0532-0307 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1211 lines of history. ! ! Reading 16448 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0532-0307_S_2017_05_27_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 15 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 47 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 15 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 486 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.813497Jy sigma=0.018077 ! Fit after self-cal, rms=0.807131Jy sigma=0.018033 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.132 mas, bmaj=6.542 mas, bpa=0.8723 degrees ! Estimated noise=867.506 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.112761 Jy ! Component: 100 - total flux cleaned = 0.143032 Jy ! Total flux subtracted in 100 components = 0.143032 Jy ! Clean residual min=-0.030833 max=0.046661 Jy/beam ! Clean residual mean=0.000057 rms=0.009105 Jy/beam ! Combined flux in latest and established models = 0.143032 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.143032 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.152697Jy sigma=0.002265 ! Fit after self-cal, rms=0.152636Jy sigma=0.002265 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.561 mas, bmaj=7.429 mas, bpa=0.5537 degrees ! Estimated noise=651.849 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (8.5, 3.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0524058 Jy ! Component: 100 - total flux cleaned = 0.0860731 Jy ! Component: 150 - total flux cleaned = 0.110526 Jy ! Component: 200 - total flux cleaned = 0.128791 Jy ! Total flux subtracted in 200 components = 0.128791 Jy ! Clean residual min=-0.020049 max=0.026278 Jy/beam ! Clean residual mean=0.000054 rms=0.006053 Jy/beam ! Combined flux in latest and established models = 0.271822 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 42 components and 0.271822 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.129364Jy sigma=0.001886 ! Fit after self-cal, rms=0.125450Jy sigma=0.001873 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.54 FD 0.80 HN 0.90 KP 0.94 ! LA 0.89 MK 1.10 NL 0.99 OV 0.89 ! PT 0.94 SC 0.87 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.73 FD 0.83 HN 0.94 KP 0.90 ! LA 0.85 MK 0.98 NL 1.13 OV 0.87 ! PT 0.94 SC 0.94 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 8.64 FD 0.89 HN 0.95 KP 0.90 ! LA 0.90 MK 1.11 NL 1.11 OV 0.99 ! PT 0.92 SC 0.87 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.89 HN 0.97 KP 1.00* ! LA 0.90 MK 1.48 NL 1.00* OV 1.00* ! PT 0.95 SC 1.00* ! ! ! Fit before self-cal, rms=0.125450Jy sigma=0.001873 ! Fit after self-cal, rms=0.479930Jy sigma=0.000806 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.571 mas, bmaj=8.087 mas, bpa=-0.7573 degrees ! Estimated noise=714.12 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0035757 Jy ! Component: 100 - total flux cleaned = 0.00403968 Jy ! Component: 150 - total flux cleaned = 0.00368187 Jy ! Component: 200 - total flux cleaned = 0.00269357 Jy ! Total flux subtracted in 200 components = 0.00269357 Jy ! Clean residual min=-0.008114 max=0.007496 Jy/beam ! Clean residual mean=-0.000010 rms=0.001922 Jy/beam ! Combined flux in latest and established models = 0.274516 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 56 components and 0.274516 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.476033Jy sigma=0.000781 ! Fit after self-cal, rms=0.475786Jy sigma=0.000770 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.475786Jy sigma=0.000770 ! Fit after self-cal, rms=0.343397Jy sigma=0.000722 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.569 mas, bmaj=7.992 mas, bpa=-0.575 degrees ! Estimated noise=693.34 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00269457 Jy ! Component: 100 - total flux cleaned = 0.00144056 Jy ! Component: 150 - total flux cleaned = 0.000202107 Jy ! Component: 200 - total flux cleaned = -0.000491379 Jy ! Total flux subtracted in 200 components = -0.000491379 Jy ! Clean residual min=-0.005159 max=0.004661 Jy/beam ! Clean residual mean=-0.000000 rms=0.001173 Jy/beam ! Combined flux in latest and established models = 0.274024 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 71 components and 0.274024 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.341913Jy sigma=0.000711 ! Fit after self-cal, rms=0.341866Jy sigma=0.000709 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000887215 Jy ! Component: 100 - total flux cleaned = 0.000298195 Jy ! Component: 150 - total flux cleaned = -8.9183e-05 Jy ! Component: 200 - total flux cleaned = -0.000316611 Jy ! Total flux subtracted in 200 components = -0.000316611 Jy ! Clean residual min=-0.004423 max=0.004044 Jy/beam ! Clean residual mean=-0.000000 rms=0.000988 Jy/beam ! Combined flux in latest and established models = 0.273708 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 84 components and 0.273708 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.341101Jy sigma=0.000707 ! Fit after self-cal, rms=0.341093Jy sigma=0.000706 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.341093Jy sigma=0.000706 ! Fit after self-cal, rms=0.382146Jy sigma=0.000703 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.55 mas, bmaj=7.983 mas, bpa=-0.708 degrees ! Estimated noise=690.261 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000292357 Jy ! Component: 100 - total flux cleaned = -0.000891142 Jy ! Component: 150 - total flux cleaned = -0.00114967 Jy ! Component: 200 - total flux cleaned = -0.00137687 Jy ! Total flux subtracted in 200 components = -0.00137687 Jy ! Clean residual min=-0.003696 max=0.003331 Jy/beam ! Clean residual mean=-0.000002 rms=0.000860 Jy/beam ! Combined flux in latest and established models = 0.272331 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 91 components and 0.272331 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.381316Jy sigma=0.000701 ! Fit after self-cal, rms=0.381309Jy sigma=0.000701 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000319398 Jy ! Component: 100 - total flux cleaned = 0.000215659 Jy ! Component: 150 - total flux cleaned = 0.00012121 Jy ! Component: 200 - total flux cleaned = -4.48748e-05 Jy ! Total flux subtracted in 200 components = -4.48748e-05 Jy ! Clean residual min=-0.003305 max=0.002996 Jy/beam ! Clean residual mean=-0.000002 rms=0.000779 Jy/beam ! Combined flux in latest and established models = 0.272286 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 102 components and 0.272286 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.380811Jy sigma=0.000700 ! Fit after self-cal, rms=0.380807Jy sigma=0.000700 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.380807Jy sigma=0.000700 ! Fit after self-cal, rms=0.410640Jy sigma=0.000699 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.625 mas, bmaj=12.73 mas, bpa=-2.834 degrees ! Estimated noise=827.372 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00043015 Jy ! Component: 100 - total flux cleaned = -0.000793382 Jy ! Component: 150 - total flux cleaned = -0.00100674 Jy ! Component: 200 - total flux cleaned = -0.00119688 Jy ! Total flux subtracted in 200 components = -0.00119688 Jy ! Clean residual min=-0.002866 max=0.003214 Jy/beam ! Clean residual mean=-0.000005 rms=0.000872 Jy/beam ! Combined flux in latest and established models = 0.271089 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 111 components and 0.271089 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.410010Jy sigma=0.000698 ! Fit after self-cal, rms=0.410006Jy sigma=0.000698 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.93017e-05 Jy ! Component: 100 - total flux cleaned = -0.000210816 Jy ! Component: 150 - total flux cleaned = -0.000361403 Jy ! Component: 200 - total flux cleaned = -0.000497804 Jy ! Total flux subtracted in 200 components = -0.000497804 Jy ! Clean residual min=-0.002588 max=0.002934 Jy/beam ! Clean residual mean=-0.000004 rms=0.000799 Jy/beam ! Combined flux in latest and established models = 0.270591 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 120 components and 0.270591 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.409594Jy sigma=0.000698 ! Fit after self-cal, rms=0.409591Jy sigma=0.000698 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.537 mas, bmaj=7.996 mas, bpa=-0.971 degrees ! Estimated noise=691.407 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.537 x 7.996 at -0.971 degrees (North through East) ! Clean map min=-0.0028733 max=0.14978 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.024 mas, bmaj=6.934 mas, bpa=-0.3396 degrees ! Estimated noise=988.211 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.131918 Jy ! Component: 100 - total flux cleaned = 0.180995 Jy ! Component: 150 - total flux cleaned = 0.206586 Jy ! Component: 200 - total flux cleaned = 0.222876 Jy ! Total flux subtracted in 200 components = 0.222876 Jy ! Clean residual min=-0.005022 max=0.008741 Jy/beam ! Clean residual mean=0.000017 rms=0.001464 Jy/beam ! Combined flux in latest and established models = 0.222876 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 26 model components to the UV plane model. ! The established model now contains 26 components and 0.222876 Jy ! Inverting map and beam ! Estimated beam: bmin=3.537 mas, bmaj=7.996 mas, bpa=-0.971 degrees ! Estimated noise=691.407 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0145226 Jy ! Component: 100 - total flux cleaned = 0.0236485 Jy ! Component: 150 - total flux cleaned = 0.0298896 Jy ! Component: 200 - total flux cleaned = 0.0343145 Jy ! Total flux subtracted in 200 components = 0.0343145 Jy ! Clean residual min=-0.002779 max=0.003755 Jy/beam ! Clean residual mean=0.000007 rms=0.000790 Jy/beam ! Combined flux in latest and established models = 0.25719 Jy ! Adding 43 model components to the UV plane model. ! The established model now contains 63 components and 0.25719 Jy ! Inverting map ! Added new window around map position (-2.5, 10). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00368327 Jy ! Component: 100 - total flux cleaned = 0.00630085 Jy ! Component: 150 - total flux cleaned = 0.00784788 Jy ! Component: 200 - total flux cleaned = 0.00902705 Jy ! Total flux subtracted in 200 components = 0.00902705 Jy ! Clean residual min=-0.002455 max=0.002642 Jy/beam ! Clean residual mean=0.000001 rms=0.000633 Jy/beam ! Combined flux in latest and established models = 0.266217 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 89 components and 0.266217 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.625 mas, bmaj=12.73 mas, bpa=-2.834 degrees ! Estimated noise=827.372 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00205768 Jy ! Component: 100 - total flux cleaned = 0.0031896 Jy ! Component: 150 - total flux cleaned = 0.00350631 Jy ! Component: 200 - total flux cleaned = 0.00378247 Jy ! Total flux subtracted in 200 components = 0.00378247 Jy ! Clean residual min=-0.002341 max=0.002623 Jy/beam ! Clean residual mean=-0.000002 rms=0.000725 Jy/beam ! Combined flux in latest and established models = 0.27 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000209696 Jy ! Component: 100 - total flux cleaned = 0.000399252 Jy ! Component: 150 - total flux cleaned = 0.000515554 Jy ! Component: 200 - total flux cleaned = 0.000623013 Jy ! Total flux subtracted in 200 components = 0.000623013 Jy ! Clean residual min=-0.002219 max=0.002585 Jy/beam ! Clean residual mean=-0.000003 rms=0.000711 Jy/beam ! Combined flux in latest and established models = 0.270623 Jy ! Adding 57 model components to the UV plane model. ! The established model now contains 136 components and 0.270623 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.537 mas, bmaj=7.996 mas, bpa=-0.971 degrees ! Estimated noise=691.407 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000366164 Jy ! Component: 100 - total flux cleaned = -0.000227069 Jy ! Component: 150 - total flux cleaned = -0.000144278 Jy ! Component: 200 - total flux cleaned = -6.88212e-05 Jy ! Total flux subtracted in 200 components = -6.88212e-05 Jy ! Clean residual min=-0.002592 max=0.002396 Jy/beam ! Clean residual mean=-0.000001 rms=0.000573 Jy/beam ! Combined flux in latest and established models = 0.270554 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 153 components and 0.270554 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.408009Jy sigma=0.000698 ! Fit after self-cal, rms=0.407996Jy sigma=0.000698 wmodel J0532-0307_S_2017_05_27_pus_map.mod ! Writing 153 model components to file: J0532-0307_S_2017_05_27_pus_map.mod wobs J0532-0307_S_2017_05_27_pus_uvs.fits ! Writing UV FITS file: J0532-0307_S_2017_05_27_pus_uvs.fits wwins J0532-0307_S_2017_05_27_pus_map.win ! wwins: Wrote 3 windows to J0532-0307_S_2017_05_27_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000160636 Jy ! Component: 100 - total flux cleaned = -7.70321e-05 Jy ! Component: 150 - total flux cleaned = -7.75894e-05 Jy ! Component: 200 - total flux cleaned = -7.85274e-05 Jy ! Component: 250 - total flux cleaned = -7.86076e-05 Jy ! Component: 300 - total flux cleaned = -0.00014617 Jy ! Component: 350 - total flux cleaned = -0.00030922 Jy ! Component: 400 - total flux cleaned = -0.000435921 Jy ! Component: 450 - total flux cleaned = -0.000497511 Jy ! Component: 500 - total flux cleaned = -0.000558671 Jy ! Component: 550 - total flux cleaned = -0.000558382 Jy ! Component: 600 - total flux cleaned = -0.000470392 Jy ! Component: 650 - total flux cleaned = -0.000356093 Jy ! Component: 700 - total flux cleaned = -0.000384414 Jy ! Component: 750 - total flux cleaned = -0.000328424 Jy ! Component: 800 - total flux cleaned = -0.00030058 Jy ! Component: 850 - total flux cleaned = -0.000191932 Jy ! Component: 900 - total flux cleaned = -0.000165314 Jy ! Component: 950 - total flux cleaned = -0.000138965 Jy ! Component: 1000 - total flux cleaned = -3.45638e-05 Jy ! Component: 1050 - total flux cleaned = 0.000119829 Jy ! Component: 1100 - total flux cleaned = 0.000170477 Jy ! Component: 1150 - total flux cleaned = 0.00029632 Jy ! Component: 1200 - total flux cleaned = 0.000396112 Jy ! Component: 1250 - total flux cleaned = 0.000543338 Jy ! Component: 1300 - total flux cleaned = 0.000567862 Jy ! Component: 1350 - total flux cleaned = 0.000784703 Jy ! Component: 1400 - total flux cleaned = 0.000832444 Jy ! Component: 1450 - total flux cleaned = 0.000902854 Jy ! Component: 1500 - total flux cleaned = 0.00104287 Jy ! Component: 1550 - total flux cleaned = 0.00111238 Jy ! Component: 1600 - total flux cleaned = 0.00118097 Jy ! Component: 1650 - total flux cleaned = 0.00133964 Jy ! Component: 1700 - total flux cleaned = 0.00145161 Jy ! Component: 1750 - total flux cleaned = 0.00149626 Jy ! Component: 1800 - total flux cleaned = 0.00156247 Jy ! Component: 1850 - total flux cleaned = 0.0015844 Jy ! Component: 1900 - total flux cleaned = 0.00162783 Jy ! Component: 1950 - total flux cleaned = 0.00173561 Jy ! Component: 2000 - total flux cleaned = 0.00184221 Jy ! Component: 2050 - total flux cleaned = 0.0018635 Jy ! Component: 2100 - total flux cleaned = 0.00190564 Jy ! Component: 2150 - total flux cleaned = 0.00188484 Jy ! Component: 2200 - total flux cleaned = 0.00194715 Jy ! Component: 2250 - total flux cleaned = 0.0019678 Jy ! Component: 2300 - total flux cleaned = 0.00200847 Jy ! Component: 2350 - total flux cleaned = 0.00204906 Jy ! Component: 2400 - total flux cleaned = 0.00206935 Jy ! Component: 2450 - total flux cleaned = 0.00210944 Jy ! Component: 2500 - total flux cleaned = 0.0021496 Jy ! Component: 2550 - total flux cleaned = 0.00216938 Jy ! Component: 2600 - total flux cleaned = 0.00218896 Jy ! Component: 2650 - total flux cleaned = 0.00224768 Jy ! Component: 2700 - total flux cleaned = 0.00222813 Jy ! Component: 2750 - total flux cleaned = 0.00226671 Jy ! Component: 2800 - total flux cleaned = 0.00226661 Jy ! Component: 2850 - total flux cleaned = 0.00224772 Jy ! Component: 2900 - total flux cleaned = 0.00226665 Jy ! Component: 2950 - total flux cleaned = 0.00226666 Jy ! Component: 3000 - total flux cleaned = 0.00230421 Jy ! Component: 3050 - total flux cleaned = 0.00226692 Jy ! Component: 3100 - total flux cleaned = 0.00228519 Jy ! Component: 3150 - total flux cleaned = 0.00228509 Jy ! Component: 3200 - total flux cleaned = 0.00226668 Jy ! Component: 3250 - total flux cleaned = 0.00226673 Jy ! Component: 3300 - total flux cleaned = 0.00232108 Jy ! Component: 3350 - total flux cleaned = 0.00230313 Jy ! Component: 3400 - total flux cleaned = 0.00235678 Jy ! Component: 3450 - total flux cleaned = 0.0023567 Jy ! Component: 3500 - total flux cleaned = 0.00230363 Jy ! Component: 3550 - total flux cleaned = 0.00235664 Jy ! Component: 3600 - total flux cleaned = 0.00239176 Jy ! Component: 3650 - total flux cleaned = 0.00242655 Jy ! Component: 3700 - total flux cleaned = 0.00247852 Jy ! Component: 3750 - total flux cleaned = 0.00247856 Jy ! Component: 3800 - total flux cleaned = 0.00249575 Jy ! Component: 3850 - total flux cleaned = 0.00249568 Jy ! Component: 3900 - total flux cleaned = 0.00252973 Jy ! Component: 3950 - total flux cleaned = 0.00261435 Jy ! Component: 4000 - total flux cleaned = 0.00263114 Jy ! Component: 4050 - total flux cleaned = 0.00269819 Jy ! Total flux subtracted in 4096 components = 0.0027149 Jy ! Clean residual min=-0.000995 max=0.001187 Jy/beam ! Clean residual mean=-0.000002 rms=0.000310 Jy/beam ! Combined flux in latest and established models = 0.273269 Jy keep ! Adding 239 model components to the UV plane model. ! The established model now contains 392 components and 0.273269 Jy ![Exited script file: muppet] wmap "J0532-0307_S_2017_05_27_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.537 x 7.996 at -0.971 degrees (North through East) ! Clean map min=-0.0024728 max=0.15307 Jy/beam ! Writing clean map to FITS file: J0532-0307_S_2017_05_27_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.153074 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000304483 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.596736 0.596736 1.19347 2.38694 4.77389 9.54777 19.0955 38.1911 76.3822 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.153 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.537 x 7.996 at -0.971 degrees (North through East) ! Clean map min=-0.0024728 max=0.15307 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0532-0307_S_2017_05_27_pus_uvs.log closed on Fri May 3 10:57:39 2019