! Started logfile: J0527-2307_S_2017_06_15_pus_uvs.log on Tue May 7 15:12:13 2019 obs J0527-2307_S_2017_06_15_pus_uva.fits ! Reading UV FITS file: J0527-2307_S_2017_06_15_pus_uva.fits ! AN table 1: 95 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.969357 visibilities/baseline/integration-bin. ! Found source: J0527-2307 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 603 lines of history. ! ! Reading 16576 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0527-2307_S_2017_06_15_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 16 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 121 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 121 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 657 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.952929Jy sigma=0.007022 ! Fit after self-cal, rms=0.936329Jy sigma=0.006904 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.513 mas, bmaj=7.091 mas, bpa=-5.412 degrees ! Estimated noise=1434.19 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0517185 Jy ! Component: 100 - total flux cleaned = 0.0640656 Jy ! Total flux subtracted in 100 components = 0.0640656 Jy ! Clean residual min=-0.005725 max=0.005916 Jy/beam ! Clean residual mean=-0.000027 rms=0.001347 Jy/beam ! Combined flux in latest and established models = 0.0640656 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.0640656 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094980Jy sigma=0.000675 ! Fit after self-cal, rms=0.094856Jy sigma=0.000674 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.979 mas, bmaj=7.939 mas, bpa=-5.171 degrees ! Estimated noise=919.697 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00636047 Jy ! Component: 100 - total flux cleaned = 0.00932898 Jy ! Component: 150 - total flux cleaned = 0.0103024 Jy ! Component: 200 - total flux cleaned = 0.0106568 Jy ! Total flux subtracted in 200 components = 0.0106568 Jy ! Clean residual min=-0.004514 max=0.005003 Jy/beam ! Clean residual mean=-0.000057 rms=0.001280 Jy/beam ! Combined flux in latest and established models = 0.0747224 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 22 components and 0.0747224 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094449Jy sigma=0.000671 ! Fit after self-cal, rms=0.094445Jy sigma=0.000671 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.13 FD 0.91 HN 1.22 KP 1.06 ! LA 0.88 MK 1.07 NL 0.93 OV 0.98 ! PT 1.00 SC 0.91 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.88 HN 1.55 KP 1.33 ! LA 0.87 MK 1.02 NL 1.06 OV 1.06 ! PT 0.99 SC 0.99 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.97 HN 1.22 KP 0.94 ! LA 0.87 MK 1.01 NL 1.00 OV 0.87 ! PT 1.02 SC 0.97 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.90 HN 1.08 KP 1.00* ! LA 0.86 MK 0.93 NL 1.00* OV 1.00* ! PT 0.88 SC 1.00* ! ! ! Fit before self-cal, rms=0.094445Jy sigma=0.000671 ! Fit after self-cal, rms=0.099503Jy sigma=0.000666 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.015 mas, bmaj=7.903 mas, bpa=-4.305 degrees ! Estimated noise=920.957 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000181072 Jy ! Component: 100 - total flux cleaned = -0.000324779 Jy ! Component: 150 - total flux cleaned = -0.000355263 Jy ! Component: 200 - total flux cleaned = -0.000384257 Jy ! Total flux subtracted in 200 components = -0.000384257 Jy ! Clean residual min=-0.003754 max=0.004783 Jy/beam ! Clean residual mean=-0.000043 rms=0.001099 Jy/beam ! Combined flux in latest and established models = 0.0743381 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 32 components and 0.0743381 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099473Jy sigma=0.000666 ! Fit after self-cal, rms=0.099800Jy sigma=0.000665 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099800Jy sigma=0.000665 ! Fit after self-cal, rms=0.103421Jy sigma=0.000661 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.029 mas, bmaj=7.86 mas, bpa=-4.344 degrees ! Estimated noise=918.763 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000142189 Jy ! Component: 100 - total flux cleaned = -0.000141125 Jy ! Component: 150 - total flux cleaned = -0.000141163 Jy ! Component: 200 - total flux cleaned = -0.000158851 Jy ! Total flux subtracted in 200 components = -0.000158851 Jy ! Clean residual min=-0.003261 max=0.004296 Jy/beam ! Clean residual mean=-0.000026 rms=0.000982 Jy/beam ! Combined flux in latest and established models = 0.0741793 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 40 components and 0.0741793 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103414Jy sigma=0.000661 ! Fit after self-cal, rms=0.103692Jy sigma=0.000661 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (124.5, 127). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00383459 Jy ! Component: 100 - total flux cleaned = 0.00531213 Jy ! Component: 150 - total flux cleaned = 0.0058191 Jy ! Component: 200 - total flux cleaned = 0.0058952 Jy ! Total flux subtracted in 200 components = 0.0058952 Jy ! Clean residual min=-0.003251 max=0.004230 Jy/beam ! Clean residual mean=-0.000021 rms=0.000931 Jy/beam ! Combined flux in latest and established models = 0.0800745 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 62 components and 0.0800745 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103577Jy sigma=0.000660 ! Fit after self-cal, rms=0.103553Jy sigma=0.000659 ! Inverting map ! Added new window around map position (19, 29.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0041085 Jy ! Component: 100 - total flux cleaned = 0.00650979 Jy ! Component: 150 - total flux cleaned = 0.00824821 Jy ! Component: 200 - total flux cleaned = 0.00953008 Jy ! Total flux subtracted in 200 components = 0.00953008 Jy ! Clean residual min=-0.002841 max=0.003644 Jy/beam ! Clean residual mean=-0.000010 rms=0.000772 Jy/beam ! Combined flux in latest and established models = 0.0896046 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 89 components and 0.0896046 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103383Jy sigma=0.000658 ! Fit after self-cal, rms=0.103340Jy sigma=0.000657 ! Inverting map ! Added new window around map position (111, 126). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00343433 Jy ! Component: 100 - total flux cleaned = 0.00555053 Jy ! Component: 150 - total flux cleaned = 0.00721207 Jy ! Component: 200 - total flux cleaned = 0.0085985 Jy ! Total flux subtracted in 200 components = 0.0085985 Jy ! Clean residual min=-0.002697 max=0.002471 Jy/beam ! Clean residual mean=0.000003 rms=0.000683 Jy/beam ! Combined flux in latest and established models = 0.0982031 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 106 components and 0.0982031 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103210Jy sigma=0.000656 ! Fit after self-cal, rms=0.103171Jy sigma=0.000656 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103171Jy sigma=0.000656 ! Fit after self-cal, rms=0.102696Jy sigma=0.000655 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.034 mas, bmaj=7.861 mas, bpa=-4.001 degrees ! Estimated noise=904.801 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00206341 Jy ! Component: 100 - total flux cleaned = 0.00358797 Jy ! Component: 150 - total flux cleaned = 0.00484182 Jy ! Component: 200 - total flux cleaned = 0.00582139 Jy ! Total flux subtracted in 200 components = 0.00582139 Jy ! Clean residual min=-0.002394 max=0.002397 Jy/beam ! Clean residual mean=-0.000001 rms=0.000609 Jy/beam ! Combined flux in latest and established models = 0.104024 Jy selfcal ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 126 components and 0.104024 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102640Jy sigma=0.000655 ! Fit after self-cal, rms=0.102626Jy sigma=0.000655 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00122161 Jy ! Component: 100 - total flux cleaned = 0.00202172 Jy ! Component: 150 - total flux cleaned = 0.00270929 Jy ! Component: 200 - total flux cleaned = 0.00330113 Jy ! Total flux subtracted in 200 components = 0.00330113 Jy ! Clean residual min=-0.002503 max=0.002384 Jy/beam ! Clean residual mean=0.000003 rms=0.000605 Jy/beam ! Combined flux in latest and established models = 0.107326 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 133 components and 0.107326 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102603Jy sigma=0.000654 ! Fit after self-cal, rms=0.102590Jy sigma=0.000654 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102590Jy sigma=0.000654 ! Fit after self-cal, rms=0.102344Jy sigma=0.000654 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.716 mas, bmaj=18.38 mas, bpa=-1.03 degrees ! Estimated noise=1132.58 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00191991 Jy ! Component: 100 - total flux cleaned = 0.0031924 Jy ! Component: 150 - total flux cleaned = 0.00410728 Jy ! Component: 200 - total flux cleaned = 0.00460774 Jy ! Total flux subtracted in 200 components = 0.00460774 Jy ! Clean residual min=-0.002703 max=0.002488 Jy/beam ! Clean residual mean=-0.000000 rms=0.000783 Jy/beam ! Combined flux in latest and established models = 0.111933 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 145 components and 0.111933 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102337Jy sigma=0.000654 ! Fit after self-cal, rms=0.102328Jy sigma=0.000654 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000940849 Jy ! Component: 100 - total flux cleaned = 0.00136099 Jy ! Component: 150 - total flux cleaned = 0.0015017 Jy ! Component: 200 - total flux cleaned = 0.00160843 Jy ! Total flux subtracted in 200 components = 0.00160843 Jy ! Clean residual min=-0.002603 max=0.002620 Jy/beam ! Clean residual mean=0.000003 rms=0.000775 Jy/beam ! Combined flux in latest and established models = 0.113542 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 149 components and 0.113542 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102327Jy sigma=0.000654 ! Fit after self-cal, rms=0.102322Jy sigma=0.000654 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.034 mas, bmaj=7.866 mas, bpa=-3.878 degrees ! Estimated noise=902.074 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.034 x 7.866 at -3.878 degrees (North through East) ! Clean map min=-0.0020569 max=0.065669 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.555 mas, bmaj=6.914 mas, bpa=-3.94 degrees ! Estimated noise=1442.98 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0510188 Jy ! Component: 100 - total flux cleaned = 0.0637613 Jy ! Component: 150 - total flux cleaned = 0.0707638 Jy ! Component: 200 - total flux cleaned = 0.0762934 Jy ! Total flux subtracted in 200 components = 0.0762934 Jy ! Clean residual min=-0.005038 max=0.004226 Jy/beam ! Clean residual mean=-0.000018 rms=0.001208 Jy/beam ! Combined flux in latest and established models = 0.0762934 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 24 model components to the UV plane model. ! The established model now contains 24 components and 0.0762934 Jy ! Inverting map and beam ! Estimated beam: bmin=3.034 mas, bmaj=7.866 mas, bpa=-3.878 degrees ! Estimated noise=902.074 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00564048 Jy ! Component: 100 - total flux cleaned = 0.0100468 Jy ! Component: 150 - total flux cleaned = 0.0137494 Jy ! Component: 200 - total flux cleaned = 0.0169399 Jy ! Total flux subtracted in 200 components = 0.0169399 Jy ! Clean residual min=-0.002921 max=0.002950 Jy/beam ! Clean residual mean=-0.000019 rms=0.000795 Jy/beam ! Combined flux in latest and established models = 0.0932333 Jy ! Adding 44 model components to the UV plane model. ! The established model now contains 66 components and 0.0932333 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.716 mas, bmaj=18.38 mas, bpa=-1.03 degrees ! Estimated noise=1132.58 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00475219 Jy ! Component: 100 - total flux cleaned = 0.00828078 Jy ! Component: 150 - total flux cleaned = 0.0110359 Jy ! Component: 200 - total flux cleaned = 0.013209 Jy ! Total flux subtracted in 200 components = 0.013209 Jy ! Clean residual min=-0.003076 max=0.002963 Jy/beam ! Clean residual mean=-0.000012 rms=0.000895 Jy/beam ! Combined flux in latest and established models = 0.106442 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00173295 Jy ! Component: 100 - total flux cleaned = 0.00312108 Jy ! Component: 150 - total flux cleaned = 0.00423855 Jy ! Component: 200 - total flux cleaned = 0.0051408 Jy ! Total flux subtracted in 200 components = 0.0051408 Jy ! Clean residual min=-0.003034 max=0.002782 Jy/beam ! Clean residual mean=0.000003 rms=0.000828 Jy/beam ! Combined flux in latest and established models = 0.111583 Jy ! Adding 65 model components to the UV plane model. ! The established model now contains 121 components and 0.111583 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.034 mas, bmaj=7.866 mas, bpa=-3.878 degrees ! Estimated noise=902.074 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000768187 Jy ! Component: 100 - total flux cleaned = 0.000966941 Jy ! Component: 150 - total flux cleaned = 0.00110339 Jy ! Component: 200 - total flux cleaned = 0.00122441 Jy ! Total flux subtracted in 200 components = 0.00122441 Jy ! Clean residual min=-0.002229 max=0.002797 Jy/beam ! Clean residual mean=0.000000 rms=0.000597 Jy/beam ! Combined flux in latest and established models = 0.112807 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 136 components and 0.112807 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102358Jy sigma=0.000654 ! Fit after self-cal, rms=0.102336Jy sigma=0.000654 wmodel J0527-2307_S_2017_06_15_pus_map.mod ! Writing 136 model components to file: J0527-2307_S_2017_06_15_pus_map.mod wobs J0527-2307_S_2017_06_15_pus_uvs.fits ! Writing UV FITS file: J0527-2307_S_2017_06_15_pus_uvs.fits wwins J0527-2307_S_2017_06_15_pus_map.win ! wwins: Wrote 4 windows to J0527-2307_S_2017_06_15_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000886901 Jy ! Component: 100 - total flux cleaned = 0.000888772 Jy ! Component: 150 - total flux cleaned = 0.000739196 Jy ! Component: 200 - total flux cleaned = 0.000488203 Jy ! Component: 250 - total flux cleaned = 0.000350281 Jy ! Component: 300 - total flux cleaned = 5.26037e-05 Jy ! Component: 350 - total flux cleaned = -0.000140424 Jy ! Component: 400 - total flux cleaned = -0.000391113 Jy ! Component: 450 - total flux cleaned = -0.000543439 Jy ! Component: 500 - total flux cleaned = -0.000692024 Jy ! Component: 550 - total flux cleaned = -0.000837269 Jy ! Component: 600 - total flux cleaned = -0.00106253 Jy ! Component: 650 - total flux cleaned = -0.00108975 Jy ! Component: 700 - total flux cleaned = -0.0012252 Jy ! Component: 750 - total flux cleaned = -0.00122495 Jy ! Component: 800 - total flux cleaned = -0.00122519 Jy ! Component: 850 - total flux cleaned = -0.00117463 Jy ! Component: 900 - total flux cleaned = -0.00112498 Jy ! Component: 950 - total flux cleaned = -0.00105189 Jy ! Component: 1000 - total flux cleaned = -0.00102813 Jy ! Component: 1050 - total flux cleaned = -0.00102802 Jy ! Component: 1100 - total flux cleaned = -0.000934264 Jy ! Component: 1150 - total flux cleaned = -0.000934305 Jy ! Component: 1200 - total flux cleaned = -0.000821626 Jy ! Component: 1250 - total flux cleaned = -0.000799812 Jy ! Component: 1300 - total flux cleaned = -0.000777944 Jy ! Component: 1350 - total flux cleaned = -0.000734383 Jy ! Component: 1400 - total flux cleaned = -0.000691539 Jy ! Component: 1450 - total flux cleaned = -0.000670427 Jy ! Component: 1500 - total flux cleaned = -0.000649693 Jy ! Component: 1550 - total flux cleaned = -0.000670215 Jy ! Component: 1600 - total flux cleaned = -0.000629748 Jy ! Component: 1650 - total flux cleaned = -0.000650033 Jy ! Component: 1700 - total flux cleaned = -0.000630366 Jy ! Component: 1750 - total flux cleaned = -0.000552296 Jy ! Component: 1800 - total flux cleaned = -0.000552574 Jy ! Component: 1850 - total flux cleaned = -0.000514343 Jy ! Component: 1900 - total flux cleaned = -0.000457676 Jy ! Component: 1950 - total flux cleaned = -0.000419956 Jy ! Component: 2000 - total flux cleaned = -0.000345851 Jy ! Component: 2050 - total flux cleaned = -0.000309355 Jy ! Component: 2100 - total flux cleaned = -0.000291377 Jy ! Component: 2150 - total flux cleaned = -0.000291306 Jy ! Component: 2200 - total flux cleaned = -0.000273398 Jy ! Component: 2250 - total flux cleaned = -0.000291026 Jy ! Component: 2300 - total flux cleaned = -0.000290795 Jy ! Component: 2350 - total flux cleaned = -0.000273697 Jy ! Component: 2400 - total flux cleaned = -0.00023962 Jy ! Component: 2450 - total flux cleaned = -0.000290814 Jy ! Component: 2500 - total flux cleaned = -0.000290741 Jy ! Component: 2550 - total flux cleaned = -0.000240753 Jy ! Component: 2600 - total flux cleaned = -0.000240985 Jy ! Component: 2650 - total flux cleaned = -0.000322852 Jy ! Component: 2700 - total flux cleaned = -0.000371494 Jy ! Component: 2750 - total flux cleaned = -0.000339525 Jy ! Component: 2800 - total flux cleaned = -0.000371533 Jy ! Component: 2850 - total flux cleaned = -0.000419073 Jy ! Component: 2900 - total flux cleaned = -0.000466167 Jy ! Component: 2950 - total flux cleaned = -0.000466082 Jy ! Component: 3000 - total flux cleaned = -0.000450547 Jy ! Component: 3050 - total flux cleaned = -0.000511715 Jy ! Component: 3100 - total flux cleaned = -0.000557124 Jy ! Component: 3150 - total flux cleaned = -0.000526912 Jy ! Component: 3200 - total flux cleaned = -0.000556903 Jy ! Component: 3250 - total flux cleaned = -0.000586603 Jy ! Component: 3300 - total flux cleaned = -0.000645446 Jy ! Component: 3350 - total flux cleaned = -0.000645346 Jy ! Component: 3400 - total flux cleaned = -0.000645358 Jy ! Component: 3450 - total flux cleaned = -0.000630959 Jy ! Component: 3500 - total flux cleaned = -0.000702254 Jy ! Component: 3550 - total flux cleaned = -0.000744577 Jy ! Component: 3600 - total flux cleaned = -0.00075873 Jy ! Component: 3650 - total flux cleaned = -0.00077255 Jy ! Component: 3700 - total flux cleaned = -0.000842161 Jy ! Component: 3750 - total flux cleaned = -0.000883488 Jy ! Component: 3800 - total flux cleaned = -0.000924531 Jy ! Component: 3850 - total flux cleaned = -0.00096532 Jy ! Component: 3900 - total flux cleaned = -0.00101937 Jy ! Component: 3950 - total flux cleaned = -0.00107295 Jy ! Component: 4000 - total flux cleaned = -0.00109948 Jy ! Component: 4050 - total flux cleaned = -0.00111271 Jy ! Total flux subtracted in 4096 components = -0.00112589 Jy ! Clean residual min=-0.000839 max=0.000743 Jy/beam ! Clean residual mean=-0.000002 rms=0.000238 Jy/beam ! Combined flux in latest and established models = 0.111682 Jy keep ! Adding 284 model components to the UV plane model. ! The established model now contains 420 components and 0.111682 Jy ![Exited script file: muppet] wmap "J0527-2307_S_2017_06_15_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.034 x 7.866 at -3.878 degrees (North through East) ! Clean map min=-0.0019425 max=0.06645 Jy/beam ! Writing clean map to FITS file: J0527-2307_S_2017_06_15_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0664499 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000236844 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.06928 1.06928 2.13855 4.2771 8.55421 17.1084 34.2168 68.4336 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.066 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.034 x 7.866 at -3.878 degrees (North through East) ! Clean map min=-0.0019425 max=0.06645 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0527-2307_S_2017_06_15_pus_uvs.log closed on Tue May 7 15:12:18 2019