! Started logfile: J0527-2258_S_2017_10_09_pus_uvs.log on Sun May 12 13:05:11 2019 obs J0527-2258_S_2017_10_09_pus_uva.fits ! Reading UV FITS file: J0527-2258_S_2017_10_09_pus_uva.fits ! AN table 1: 115 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.734058 visibilities/baseline/integration-bin. ! Found source: J0527-2258 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 496 lines of history. ! ! Reading 12156 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0527-2258_S_2017_10_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 142 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 214 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 199 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 608 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.940760Jy sigma=0.007198 ! Fit after self-cal, rms=0.926922Jy sigma=0.007102 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.561 mas, bmaj=13.09 mas, bpa=-20.56 degrees ! Estimated noise=1370.27 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0576542 Jy ! Component: 100 - total flux cleaned = 0.0708812 Jy ! Total flux subtracted in 100 components = 0.0708812 Jy ! Clean residual min=-0.004044 max=0.005223 Jy/beam ! Clean residual mean=-0.000017 rms=0.001253 Jy/beam ! Combined flux in latest and established models = 0.0708812 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.0708812 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093237Jy sigma=0.000652 ! Fit after self-cal, rms=0.093202Jy sigma=0.000652 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.027 mas, bmaj=14.93 mas, bpa=-19.46 degrees ! Estimated noise=1002.25 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00919845 Jy ! Component: 100 - total flux cleaned = 0.0145682 Jy ! Component: 150 - total flux cleaned = 0.0178927 Jy ! Component: 200 - total flux cleaned = 0.0201035 Jy ! Total flux subtracted in 200 components = 0.0201035 Jy ! Clean residual min=-0.002906 max=0.003197 Jy/beam ! Clean residual mean=-0.000014 rms=0.000833 Jy/beam ! Combined flux in latest and established models = 0.0909846 Jy ! Performing phase self-cal ! Adding 52 model components to the UV plane model. ! The established model now contains 68 components and 0.0909846 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092232Jy sigma=0.000644 ! Fit after self-cal, rms=0.092143Jy sigma=0.000644 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 0.95 HN 0.98 KP 0.97 ! LA 1.08 MK 1.04 NL 0.93 OV 1.00* ! PT 1.00 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.57 FD 0.93 HN 1.09 KP 1.00 ! LA 0.95 MK 1.00 NL 1.10 OV 1.00* ! PT 0.97 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.15 FD 0.99 HN 0.99 KP 0.96 ! LA 0.81 MK 1.05 NL 1.15 OV 1.00* ! PT 0.92 ! ! ! Correcting IF 4. ! A total of 51 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.97 HN 0.93 KP 1.00* ! LA 1.00* MK 1.02 NL 1.00* OV 1.00* ! PT 0.98 ! ! ! Fit before self-cal, rms=0.092143Jy sigma=0.000644 ! Fit after self-cal, rms=0.090841Jy sigma=0.000641 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.07 mas, bmaj=15.3 mas, bpa=-19.5 degrees ! Estimated noise=1003.67 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000249537 Jy ! Component: 100 - total flux cleaned = -0.00034365 Jy ! Component: 150 - total flux cleaned = -0.000368432 Jy ! Component: 200 - total flux cleaned = -0.00034524 Jy ! Total flux subtracted in 200 components = -0.00034524 Jy ! Clean residual min=-0.002510 max=0.002254 Jy/beam ! Clean residual mean=-0.000007 rms=0.000627 Jy/beam ! Combined flux in latest and established models = 0.0906394 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 81 components and 0.0906394 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090818Jy sigma=0.000641 ! Fit after self-cal, rms=0.090827Jy sigma=0.000640 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090827Jy sigma=0.000640 ! Fit after self-cal, rms=0.091127Jy sigma=0.000640 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.074 mas, bmaj=15.35 mas, bpa=-19.5 degrees ! Estimated noise=1003.79 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000354965 Jy ! Component: 100 - total flux cleaned = -0.000474708 Jy ! Component: 150 - total flux cleaned = -0.000535533 Jy ! Component: 200 - total flux cleaned = -0.000553698 Jy ! Total flux subtracted in 200 components = -0.000553698 Jy ! Clean residual min=-0.002453 max=0.002234 Jy/beam ! Clean residual mean=-0.000007 rms=0.000619 Jy/beam ! Combined flux in latest and established models = 0.0900857 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 92 components and 0.0900857 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091110Jy sigma=0.000640 ! Fit after self-cal, rms=0.091118Jy sigma=0.000640 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.58308e-05 Jy ! Component: 100 - total flux cleaned = -6.56408e-05 Jy ! Component: 150 - total flux cleaned = -6.57724e-05 Jy ! Component: 200 - total flux cleaned = -8.05493e-05 Jy ! Total flux subtracted in 200 components = -8.05493e-05 Jy ! Clean residual min=-0.002444 max=0.002205 Jy/beam ! Clean residual mean=-0.000007 rms=0.000618 Jy/beam ! Combined flux in latest and established models = 0.0900051 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 98 components and 0.0900051 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091108Jy sigma=0.000640 ! Fit after self-cal, rms=0.091106Jy sigma=0.000640 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091106Jy sigma=0.000640 ! Fit after self-cal, rms=0.091159Jy sigma=0.000639 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.076 mas, bmaj=15.4 mas, bpa=-19.69 degrees ! Estimated noise=1002.72 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000526805 Jy ! Component: 100 - total flux cleaned = -0.000661365 Jy ! Component: 150 - total flux cleaned = -0.000759214 Jy ! Component: 200 - total flux cleaned = -0.000829673 Jy ! Total flux subtracted in 200 components = -0.000829673 Jy ! Clean residual min=-0.002304 max=0.002045 Jy/beam ! Clean residual mean=-0.000006 rms=0.000564 Jy/beam ! Combined flux in latest and established models = 0.0891755 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 107 components and 0.0891754 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091143Jy sigma=0.000639 ! Fit after self-cal, rms=0.091162Jy sigma=0.000639 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.28058e-05 Jy ! Component: 100 - total flux cleaned = -7.85282e-05 Jy ! Component: 150 - total flux cleaned = -9.32776e-05 Jy ! Component: 200 - total flux cleaned = -0.000106317 Jy ! Total flux subtracted in 200 components = -0.000106317 Jy ! Clean residual min=-0.002327 max=0.001997 Jy/beam ! Clean residual mean=-0.000007 rms=0.000565 Jy/beam ! Combined flux in latest and established models = 0.0890691 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 114 components and 0.0890691 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091155Jy sigma=0.000639 ! Fit after self-cal, rms=0.091152Jy sigma=0.000639 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091152Jy sigma=0.000639 ! Fit after self-cal, rms=0.091278Jy sigma=0.000639 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.939 mas, bmaj=21.49 mas, bpa=-7.639 degrees ! Estimated noise=1232.89 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000284455 Jy ! Component: 100 - total flux cleaned = -0.000295968 Jy ! Component: 150 - total flux cleaned = -0.000297246 Jy ! Component: 200 - total flux cleaned = -0.000306378 Jy ! Total flux subtracted in 200 components = -0.000306378 Jy ! Clean residual min=-0.002576 max=0.002006 Jy/beam ! Clean residual mean=-0.000011 rms=0.000682 Jy/beam ! Combined flux in latest and established models = 0.0887628 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 125 components and 0.0887627 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091275Jy sigma=0.000639 ! Fit after self-cal, rms=0.091292Jy sigma=0.000639 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.62193e-05 Jy ! Component: 100 - total flux cleaned = 3.74952e-05 Jy ! Component: 150 - total flux cleaned = 3.6912e-05 Jy ! Component: 200 - total flux cleaned = 2.98886e-05 Jy ! Total flux subtracted in 200 components = 2.98886e-05 Jy ! Clean residual min=-0.002571 max=0.002012 Jy/beam ! Clean residual mean=-0.000011 rms=0.000679 Jy/beam ! Combined flux in latest and established models = 0.0887926 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 133 components and 0.0887926 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091292Jy sigma=0.000639 ! Fit after self-cal, rms=0.091294Jy sigma=0.000639 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.078 mas, bmaj=15.43 mas, bpa=-19.77 degrees ! Estimated noise=1001.4 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.078 x 15.43 at -19.77 degrees (North through East) ! Clean map min=-0.0021841 max=0.073832 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.609 mas, bmaj=13.34 mas, bpa=-21.03 degrees ! Estimated noise=1346.05 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0567443 Jy ! Component: 100 - total flux cleaned = 0.0699473 Jy ! Component: 150 - total flux cleaned = 0.0761939 Jy ! Component: 200 - total flux cleaned = 0.080179 Jy ! Total flux subtracted in 200 components = 0.080179 Jy ! Clean residual min=-0.003121 max=0.003021 Jy/beam ! Clean residual mean=-0.000009 rms=0.000816 Jy/beam ! Combined flux in latest and established models = 0.080179 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 0.080179 Jy ! Inverting map and beam ! Estimated beam: bmin=3.078 mas, bmaj=15.43 mas, bpa=-19.77 degrees ! Estimated noise=1001.4 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00382334 Jy ! Component: 100 - total flux cleaned = 0.00549383 Jy ! Component: 150 - total flux cleaned = 0.00621518 Jy ! Component: 200 - total flux cleaned = 0.00676701 Jy ! Total flux subtracted in 200 components = 0.00676701 Jy ! Clean residual min=-0.002354 max=0.002062 Jy/beam ! Clean residual mean=-0.000009 rms=0.000582 Jy/beam ! Combined flux in latest and established models = 0.086946 Jy ! Adding 26 model components to the UV plane model. ! The established model now contains 43 components and 0.086946 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.939 mas, bmaj=21.49 mas, bpa=-7.639 degrees ! Estimated noise=1232.89 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00125824 Jy ! Component: 100 - total flux cleaned = 0.00150316 Jy ! Component: 150 - total flux cleaned = 0.00160353 Jy ! Component: 200 - total flux cleaned = 0.00166576 Jy ! Total flux subtracted in 200 components = 0.00166576 Jy ! Clean residual min=-0.002556 max=0.002032 Jy/beam ! Clean residual mean=-0.000011 rms=0.000681 Jy/beam ! Combined flux in latest and established models = 0.0886117 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.54516e-05 Jy ! Component: 100 - total flux cleaned = 4.12284e-05 Jy ! Component: 150 - total flux cleaned = 4.88646e-05 Jy ! Component: 200 - total flux cleaned = 6.31178e-05 Jy ! Total flux subtracted in 200 components = 6.31178e-05 Jy ! Clean residual min=-0.002547 max=0.002015 Jy/beam ! Clean residual mean=-0.000011 rms=0.000680 Jy/beam ! Combined flux in latest and established models = 0.0886749 Jy ! Adding 21 model components to the UV plane model. ! The established model now contains 59 components and 0.0886748 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.078 mas, bmaj=15.43 mas, bpa=-19.77 degrees ! Estimated noise=1001.4 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000376625 Jy ! Component: 100 - total flux cleaned = -0.000378491 Jy ! Component: 150 - total flux cleaned = -0.000378446 Jy ! Component: 200 - total flux cleaned = -0.000358716 Jy ! Total flux subtracted in 200 components = -0.000358716 Jy ! Clean residual min=-0.002353 max=0.001967 Jy/beam ! Clean residual mean=-0.000006 rms=0.000562 Jy/beam ! Combined flux in latest and established models = 0.0883161 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 70 components and 0.0883161 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091292Jy sigma=0.000639 ! Fit after self-cal, rms=0.091271Jy sigma=0.000639 wmodel J0527-2258_S_2017_10_09_pus_map.mod ! Writing 70 model components to file: J0527-2258_S_2017_10_09_pus_map.mod wobs J0527-2258_S_2017_10_09_pus_uvs.fits ! Writing UV FITS file: J0527-2258_S_2017_10_09_pus_uvs.fits wwins J0527-2258_S_2017_10_09_pus_map.win ! wwins: Wrote 1 windows to J0527-2258_S_2017_10_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000946696 Jy ! Component: 100 - total flux cleaned = -0.00138651 Jy ! Component: 150 - total flux cleaned = -0.00172492 Jy ! Component: 200 - total flux cleaned = -0.00191646 Jy ! Component: 250 - total flux cleaned = -0.00197823 Jy ! Component: 300 - total flux cleaned = -0.00221315 Jy ! Component: 350 - total flux cleaned = -0.00238193 Jy ! Component: 400 - total flux cleaned = -0.00251776 Jy ! Component: 450 - total flux cleaned = -0.00267484 Jy ! Component: 500 - total flux cleaned = -0.00277677 Jy ! Component: 550 - total flux cleaned = -0.00285077 Jy ! Component: 600 - total flux cleaned = -0.00292274 Jy ! Component: 650 - total flux cleaned = -0.00287577 Jy ! Component: 700 - total flux cleaned = -0.00289927 Jy ! Component: 750 - total flux cleaned = -0.00287732 Jy ! Component: 800 - total flux cleaned = -0.00292113 Jy ! Component: 850 - total flux cleaned = -0.00292094 Jy ! Component: 900 - total flux cleaned = -0.00285847 Jy ! Component: 950 - total flux cleaned = -0.00283756 Jy ! Component: 1000 - total flux cleaned = -0.00273719 Jy ! Component: 1050 - total flux cleaned = -0.00269746 Jy ! Component: 1100 - total flux cleaned = -0.00269717 Jy ! Component: 1150 - total flux cleaned = -0.00260335 Jy ! Component: 1200 - total flux cleaned = -0.00256654 Jy ! Component: 1250 - total flux cleaned = -0.00251215 Jy ! Component: 1300 - total flux cleaned = -0.00251201 Jy ! Component: 1350 - total flux cleaned = -0.0024588 Jy ! Component: 1400 - total flux cleaned = -0.0023895 Jy ! Component: 1450 - total flux cleaned = -0.00232145 Jy ! Component: 1500 - total flux cleaned = -0.00227097 Jy ! Component: 1550 - total flux cleaned = -0.00215499 Jy ! Component: 1600 - total flux cleaned = -0.00210603 Jy ! Component: 1650 - total flux cleaned = -0.00207377 Jy ! Component: 1700 - total flux cleaned = -0.00202613 Jy ! Component: 1750 - total flux cleaned = -0.00194788 Jy ! Component: 1800 - total flux cleaned = -0.00191692 Jy ! Component: 1850 - total flux cleaned = -0.0018863 Jy ! Component: 1900 - total flux cleaned = -0.00184065 Jy ! Component: 1950 - total flux cleaned = -0.00173622 Jy ! Component: 2000 - total flux cleaned = -0.00170684 Jy ! Component: 2050 - total flux cleaned = -0.0016921 Jy ! Component: 2100 - total flux cleaned = -0.00160558 Jy ! Component: 2150 - total flux cleaned = -0.00161994 Jy ! Component: 2200 - total flux cleaned = -0.00160577 Jy ! Component: 2250 - total flux cleaned = -0.00159176 Jy ! Component: 2300 - total flux cleaned = -0.0015919 Jy ! Component: 2350 - total flux cleaned = -0.00155088 Jy ! Component: 2400 - total flux cleaned = -0.00156438 Jy ! Component: 2450 - total flux cleaned = -0.00156431 Jy ! Component: 2500 - total flux cleaned = -0.00156425 Jy ! Component: 2550 - total flux cleaned = -0.00157745 Jy ! Component: 2600 - total flux cleaned = -0.00161655 Jy ! Component: 2650 - total flux cleaned = -0.00160371 Jy ! Component: 2700 - total flux cleaned = -0.00161657 Jy ! Component: 2750 - total flux cleaned = -0.00164182 Jy ! Component: 2800 - total flux cleaned = -0.00165416 Jy ! Component: 2850 - total flux cleaned = -0.00166647 Jy ! Component: 2900 - total flux cleaned = -0.00162963 Jy ! Component: 2950 - total flux cleaned = -0.00169091 Jy ! Component: 3000 - total flux cleaned = -0.00167868 Jy ! Component: 3050 - total flux cleaned = -0.00167875 Jy ! Component: 3100 - total flux cleaned = -0.00172648 Jy ! Component: 3150 - total flux cleaned = -0.00170275 Jy ! Component: 3200 - total flux cleaned = -0.00171443 Jy ! Component: 3250 - total flux cleaned = -0.0016911 Jy ! Component: 3300 - total flux cleaned = -0.0016912 Jy ! Component: 3350 - total flux cleaned = -0.0017141 Jy ! Component: 3400 - total flux cleaned = -0.00170264 Jy ! Component: 3450 - total flux cleaned = -0.00173656 Jy ! Component: 3500 - total flux cleaned = -0.00174767 Jy ! Component: 3550 - total flux cleaned = -0.00171412 Jy ! Component: 3600 - total flux cleaned = -0.00172526 Jy ! Component: 3650 - total flux cleaned = -0.00173633 Jy ! Component: 3700 - total flux cleaned = -0.00172537 Jy ! Component: 3750 - total flux cleaned = -0.00173625 Jy ! Component: 3800 - total flux cleaned = -0.00174711 Jy ! Component: 3850 - total flux cleaned = -0.00174719 Jy ! Component: 3900 - total flux cleaned = -0.0017579 Jy ! Component: 3950 - total flux cleaned = -0.0018003 Jy ! Component: 4000 - total flux cleaned = -0.00177909 Jy ! Component: 4050 - total flux cleaned = -0.00178951 Jy ! Total flux subtracted in 4096 components = -0.00176871 Jy ! Clean residual min=-0.000615 max=0.000582 Jy/beam ! Clean residual mean=-0.000001 rms=0.000190 Jy/beam ! Combined flux in latest and established models = 0.0865474 Jy keep ! Adding 284 model components to the UV plane model. ! The established model now contains 354 components and 0.0865474 Jy ![Exited script file: muppet] wmap "J0527-2258_S_2017_10_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.078 x 15.43 at -19.77 degrees (North through East) ! Clean map min=-0.0016317 max=0.074242 Jy/beam ! Writing clean map to FITS file: J0527-2258_S_2017_10_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0742422 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000185027 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.747661 0.747661 1.49532 2.99064 5.98129 11.9626 23.9252 47.8503 95.7006 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.074 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.078 x 15.43 at -19.77 degrees (North through East) ! Clean map min=-0.0016317 max=0.074242 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0527-2258_S_2017_10_09_pus_uvs.log closed on Sun May 12 13:05:16 2019