! Started logfile: J0527-2258_S_2017_06_15_pus_uvs.log on Tue May 7 15:12:08 2019 obs J0527-2258_S_2017_06_15_pus_uva.fits ! Reading UV FITS file: J0527-2258_S_2017_06_15_pus_uva.fits ! AN table 1: 76 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.96462 visibilities/baseline/integration-bin. ! Found source: J0527-2258 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 603 lines of history. ! ! Reading 13196 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0527-2258_S_2017_06_15_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 16 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 88 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 74 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 594 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.943942Jy sigma=0.006962 ! Fit after self-cal, rms=0.928634Jy sigma=0.006854 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.565 mas, bmaj=6.962 mas, bpa=-4.809 degrees ! Estimated noise=1376.85 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0571099 Jy ! Component: 100 - total flux cleaned = 0.0701595 Jy ! Total flux subtracted in 100 components = 0.0701595 Jy ! Clean residual min=-0.004984 max=0.007341 Jy/beam ! Clean residual mean=-0.000011 rms=0.001384 Jy/beam ! Combined flux in latest and established models = 0.0701595 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.0701595 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095433Jy sigma=0.000680 ! Fit after self-cal, rms=0.095310Jy sigma=0.000679 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.024 mas, bmaj=7.861 mas, bpa=-4.325 degrees ! Estimated noise=1022.31 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00782608 Jy ! Component: 100 - total flux cleaned = 0.0113928 Jy ! Component: 150 - total flux cleaned = 0.0133003 Jy ! Component: 200 - total flux cleaned = 0.0137956 Jy ! Total flux subtracted in 200 components = 0.0137956 Jy ! Clean residual min=-0.003721 max=0.004764 Jy/beam ! Clean residual mean=-0.000008 rms=0.001004 Jy/beam ! Combined flux in latest and established models = 0.0839551 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 27 components and 0.0839551 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094735Jy sigma=0.000675 ! Fit after self-cal, rms=0.094723Jy sigma=0.000674 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 0.97 HN 1.25 KP 1.01 ! LA 0.93 MK 1.04 NL 0.95 OV 1.03 ! PT 0.95 SC 0.98 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.95 HN 1.57 KP 1.01 ! LA 0.91 MK 1.03 NL 1.01 OV 1.00 ! PT 0.95 SC 0.97 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.56 FD 0.99 HN 1.14 KP 1.00 ! LA 0.92 MK 1.05 NL 1.01 OV 0.91 ! PT 0.99 SC 0.89 ! ! ! Correcting IF 4. ! A total of 126 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.67 HN 0.68 KP 1.00* ! LA 1.00* MK 0.99 NL 1.00* OV 1.00* ! PT 1.18 SC 1.00* ! ! ! Fit before self-cal, rms=0.094723Jy sigma=0.000674 ! Fit after self-cal, rms=0.101403Jy sigma=0.000672 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.056 mas, bmaj=7.806 mas, bpa=-3.105 degrees ! Estimated noise=1038.53 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000355143 Jy ! Component: 100 - total flux cleaned = 0.000235588 Jy ! Component: 150 - total flux cleaned = 0.000134977 Jy ! Component: 200 - total flux cleaned = 7.46161e-05 Jy ! Total flux subtracted in 200 components = 7.46161e-05 Jy ! Clean residual min=-0.002820 max=0.003671 Jy/beam ! Clean residual mean=0.000004 rms=0.000802 Jy/beam ! Combined flux in latest and established models = 0.0840297 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 36 components and 0.0840297 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101366Jy sigma=0.000672 ! Fit after self-cal, rms=0.101644Jy sigma=0.000671 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101644Jy sigma=0.000671 ! Fit after self-cal, rms=0.101620Jy sigma=0.000669 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.058 mas, bmaj=7.78 mas, bpa=-3.243 degrees ! Estimated noise=1035.05 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00028699 Jy ! Component: 100 - total flux cleaned = 0.000205728 Jy ! Component: 150 - total flux cleaned = 0.000136216 Jy ! Component: 200 - total flux cleaned = 0.000156178 Jy ! Total flux subtracted in 200 components = 0.000156178 Jy ! Clean residual min=-0.002502 max=0.002836 Jy/beam ! Clean residual mean=0.000003 rms=0.000661 Jy/beam ! Combined flux in latest and established models = 0.0841859 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 42 components and 0.0841859 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101607Jy sigma=0.000668 ! Fit after self-cal, rms=0.101696Jy sigma=0.000668 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (42, 43). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0019407 Jy ! Component: 100 - total flux cleaned = 0.00200494 Jy ! Component: 150 - total flux cleaned = 0.00190015 Jy ! Component: 200 - total flux cleaned = 0.0018089 Jy ! Total flux subtracted in 200 components = 0.0018089 Jy ! Clean residual min=-0.002416 max=0.002635 Jy/beam ! Clean residual mean=0.000001 rms=0.000625 Jy/beam ! Combined flux in latest and established models = 0.0859948 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 60 components and 0.0859948 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101599Jy sigma=0.000668 ! Fit after self-cal, rms=0.101590Jy sigma=0.000668 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101590Jy sigma=0.000668 ! Fit after self-cal, rms=0.101433Jy sigma=0.000668 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.048 mas, bmaj=7.758 mas, bpa=-3.328 degrees ! Estimated noise=1031.76 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000707255 Jy ! Component: 100 - total flux cleaned = 0.000660729 Jy ! Component: 150 - total flux cleaned = 0.000659099 Jy ! Component: 200 - total flux cleaned = 0.000658909 Jy ! Total flux subtracted in 200 components = 0.000658909 Jy ! Clean residual min=-0.002370 max=0.002624 Jy/beam ! Clean residual mean=0.000000 rms=0.000617 Jy/beam ! Combined flux in latest and established models = 0.0866537 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 65 components and 0.0866537 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101391Jy sigma=0.000667 ! Fit after self-cal, rms=0.101386Jy sigma=0.000667 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-47.5, 97). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0022452 Jy ! Component: 100 - total flux cleaned = 0.00283641 Jy ! Component: 150 - total flux cleaned = 0.00291936 Jy ! Component: 200 - total flux cleaned = 0.00288207 Jy ! Total flux subtracted in 200 components = 0.00288207 Jy ! Clean residual min=-0.002153 max=0.002657 Jy/beam ! Clean residual mean=0.000003 rms=0.000579 Jy/beam ! Combined flux in latest and established models = 0.0895357 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 79 components and 0.0895358 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101326Jy sigma=0.000667 ! Fit after self-cal, rms=0.101308Jy sigma=0.000667 ! Inverting map ! Added new window around map position (100, -50). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00125815 Jy ! Component: 100 - total flux cleaned = 0.00143439 Jy ! Component: 150 - total flux cleaned = 0.00167391 Jy ! Component: 200 - total flux cleaned = 0.00175628 Jy ! Total flux subtracted in 200 components = 0.00175628 Jy ! Clean residual min=-0.001973 max=0.002081 Jy/beam ! Clean residual mean=0.000003 rms=0.000546 Jy/beam ! Combined flux in latest and established models = 0.091292 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 97 components and 0.091292 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101222Jy sigma=0.000666 ! Fit after self-cal, rms=0.101203Jy sigma=0.000666 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101203Jy sigma=0.000666 ! Fit after self-cal, rms=0.101025Jy sigma=0.000666 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.686 mas, bmaj=17.63 mas, bpa=-0.6257 degrees ! Estimated noise=1317.25 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00130344 Jy ! Component: 100 - total flux cleaned = 0.00193973 Jy ! Component: 150 - total flux cleaned = 0.00213251 Jy ! Component: 200 - total flux cleaned = 0.00223679 Jy ! Total flux subtracted in 200 components = 0.00223679 Jy ! Clean residual min=-0.001902 max=0.002209 Jy/beam ! Clean residual mean=0.000004 rms=0.000666 Jy/beam ! Combined flux in latest and established models = 0.0935288 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 111 components and 0.0935288 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101006Jy sigma=0.000666 ! Fit after self-cal, rms=0.101000Jy sigma=0.000666 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00063132 Jy ! Component: 100 - total flux cleaned = 0.000728816 Jy ! Component: 150 - total flux cleaned = 0.000787585 Jy ! Component: 200 - total flux cleaned = 0.000815177 Jy ! Total flux subtracted in 200 components = 0.000815177 Jy ! Clean residual min=-0.001910 max=0.002169 Jy/beam ! Clean residual mean=0.000004 rms=0.000654 Jy/beam ! Combined flux in latest and established models = 0.094344 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 117 components and 0.094344 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100990Jy sigma=0.000666 ! Fit after self-cal, rms=0.100986Jy sigma=0.000666 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.04 mas, bmaj=7.738 mas, bpa=-3.343 degrees ! Estimated noise=1029.96 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.04 x 7.738 at -3.343 degrees (North through East) ! Clean map min=-0.0023792 max=0.074091 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.574 mas, bmaj=6.832 mas, bpa=-4.158 degrees ! Estimated noise=1416.76 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0571636 Jy ! Component: 100 - total flux cleaned = 0.0711491 Jy ! Component: 150 - total flux cleaned = 0.0777285 Jy ! Component: 200 - total flux cleaned = 0.0822355 Jy ! Total flux subtracted in 200 components = 0.0822355 Jy ! Clean residual min=-0.003919 max=0.003495 Jy/beam ! Clean residual mean=-0.000006 rms=0.000956 Jy/beam ! Combined flux in latest and established models = 0.0822355 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.0822355 Jy ! Inverting map and beam ! Estimated beam: bmin=3.04 mas, bmaj=7.738 mas, bpa=-3.343 degrees ! Estimated noise=1029.96 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (5, -12.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00469108 Jy ! Component: 100 - total flux cleaned = 0.00703295 Jy ! Component: 150 - total flux cleaned = 0.00872119 Jy ! Component: 200 - total flux cleaned = 0.0100524 Jy ! Total flux subtracted in 200 components = 0.0100524 Jy ! Clean residual min=-0.002455 max=0.002349 Jy/beam ! Clean residual mean=0.000000 rms=0.000610 Jy/beam ! Combined flux in latest and established models = 0.0922879 Jy ! Adding 34 model components to the UV plane model. ! The established model now contains 47 components and 0.0922879 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.686 mas, bmaj=17.63 mas, bpa=-0.6257 degrees ! Estimated noise=1317.25 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00164525 Jy ! Component: 100 - total flux cleaned = 0.00218669 Jy ! Component: 150 - total flux cleaned = 0.00271536 Jy ! Component: 200 - total flux cleaned = 0.00307693 Jy ! Total flux subtracted in 200 components = 0.00307693 Jy ! Clean residual min=-0.002010 max=0.002221 Jy/beam ! Clean residual mean=0.000005 rms=0.000672 Jy/beam ! Combined flux in latest and established models = 0.0953648 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000234723 Jy ! Component: 100 - total flux cleaned = 0.000490202 Jy ! Component: 150 - total flux cleaned = 0.000529605 Jy ! Component: 200 - total flux cleaned = 0.000639546 Jy ! Total flux subtracted in 200 components = 0.000639546 Jy ! Clean residual min=-0.001989 max=0.002155 Jy/beam ! Clean residual mean=0.000007 rms=0.000645 Jy/beam ! Combined flux in latest and established models = 0.0960043 Jy ! Adding 41 model components to the UV plane model. ! The established model now contains 88 components and 0.0960044 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.04 mas, bmaj=7.738 mas, bpa=-3.343 degrees ! Estimated noise=1029.96 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000114946 Jy ! Component: 100 - total flux cleaned = -0.000375301 Jy ! Component: 150 - total flux cleaned = -0.000423644 Jy ! Component: 200 - total flux cleaned = -0.000467361 Jy ! Total flux subtracted in 200 components = -0.000467361 Jy ! Clean residual min=-0.002002 max=0.002160 Jy/beam ! Clean residual mean=0.000004 rms=0.000534 Jy/beam ! Combined flux in latest and established models = 0.095537 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 105 components and 0.095537 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101001Jy sigma=0.000666 ! Fit after self-cal, rms=0.100984Jy sigma=0.000666 wmodel J0527-2258_S_2017_06_15_pus_map.mod ! Writing 105 model components to file: J0527-2258_S_2017_06_15_pus_map.mod wobs J0527-2258_S_2017_06_15_pus_uvs.fits ! Writing UV FITS file: J0527-2258_S_2017_06_15_pus_uvs.fits wwins J0527-2258_S_2017_06_15_pus_map.win ! wwins: Wrote 5 windows to J0527-2258_S_2017_06_15_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000125186 Jy ! Component: 100 - total flux cleaned = 5.34482e-05 Jy ! Component: 150 - total flux cleaned = -8.21168e-05 Jy ! Component: 200 - total flux cleaned = -0.000211875 Jy ! Component: 250 - total flux cleaned = -0.000431906 Jy ! Component: 300 - total flux cleaned = -0.000615495 Jy ! Component: 350 - total flux cleaned = -0.000675554 Jy ! Component: 400 - total flux cleaned = -0.000733964 Jy ! Component: 450 - total flux cleaned = -0.000676871 Jy ! Component: 500 - total flux cleaned = -0.000761439 Jy ! Component: 550 - total flux cleaned = -0.000622793 Jy ! Component: 600 - total flux cleaned = -0.000649964 Jy ! Component: 650 - total flux cleaned = -0.000515304 Jy ! Component: 700 - total flux cleaned = -0.000621193 Jy ! Component: 750 - total flux cleaned = -0.000568256 Jy ! Component: 800 - total flux cleaned = -0.000490693 Jy ! Component: 850 - total flux cleaned = -0.000439794 Jy ! Component: 900 - total flux cleaned = -0.000389782 Jy ! Component: 950 - total flux cleaned = -0.000340457 Jy ! Component: 1000 - total flux cleaned = -0.000364595 Jy ! Component: 1050 - total flux cleaned = -0.00031633 Jy ! Component: 1100 - total flux cleaned = -0.000268475 Jy ! Component: 1150 - total flux cleaned = -0.000221323 Jy ! Component: 1200 - total flux cleaned = -0.000174937 Jy ! Component: 1250 - total flux cleaned = -0.000152052 Jy ! Component: 1300 - total flux cleaned = -6.09911e-05 Jy ! Component: 1350 - total flux cleaned = 6.21939e-06 Jy ! Component: 1400 - total flux cleaned = -3.79063e-05 Jy ! Component: 1450 - total flux cleaned = 2.80628e-05 Jy ! Component: 1500 - total flux cleaned = 0.000136616 Jy ! Component: 1550 - total flux cleaned = 0.000179327 Jy ! Component: 1600 - total flux cleaned = 0.000243066 Jy ! Component: 1650 - total flux cleaned = 0.000368629 Jy ! Component: 1700 - total flux cleaned = 0.000472259 Jy ! Component: 1750 - total flux cleaned = 0.00055462 Jy ! Component: 1800 - total flux cleaned = 0.000615798 Jy ! Component: 1850 - total flux cleaned = 0.000776727 Jy ! Component: 1900 - total flux cleaned = 0.000816636 Jy ! Component: 1950 - total flux cleaned = 0.000895517 Jy ! Component: 2000 - total flux cleaned = 0.000993492 Jy ! Component: 2050 - total flux cleaned = 0.00109019 Jy ! Component: 2100 - total flux cleaned = 0.00118601 Jy ! Component: 2150 - total flux cleaned = 0.00124281 Jy ! Component: 2200 - total flux cleaned = 0.00133697 Jy ! Component: 2250 - total flux cleaned = 0.00139315 Jy ! Component: 2300 - total flux cleaned = 0.00146729 Jy ! Component: 2350 - total flux cleaned = 0.00148558 Jy ! Component: 2400 - total flux cleaned = 0.00155847 Jy ! Component: 2450 - total flux cleaned = 0.00154037 Jy ! Component: 2500 - total flux cleaned = 0.00163022 Jy ! Component: 2550 - total flux cleaned = 0.00166585 Jy ! Component: 2600 - total flux cleaned = 0.00175419 Jy ! Component: 2650 - total flux cleaned = 0.00177186 Jy ! Component: 2700 - total flux cleaned = 0.00189351 Jy ! Component: 2750 - total flux cleaned = 0.00194515 Jy ! Component: 2800 - total flux cleaned = 0.00204772 Jy ! Component: 2850 - total flux cleaned = 0.00203062 Jy ! Component: 2900 - total flux cleaned = 0.00213168 Jy ! Component: 2950 - total flux cleaned = 0.00213157 Jy ! Component: 3000 - total flux cleaned = 0.00209835 Jy ! Component: 3050 - total flux cleaned = 0.00221389 Jy ! Component: 3100 - total flux cleaned = 0.00224662 Jy ! Component: 3150 - total flux cleaned = 0.00224643 Jy ! Component: 3200 - total flux cleaned = 0.00226261 Jy ! Component: 3250 - total flux cleaned = 0.00227877 Jy ! Component: 3300 - total flux cleaned = 0.00234263 Jy ! Component: 3350 - total flux cleaned = 0.00239003 Jy ! Component: 3400 - total flux cleaned = 0.00242142 Jy ! Component: 3450 - total flux cleaned = 0.00246839 Jy ! Component: 3500 - total flux cleaned = 0.00249926 Jy ! Component: 3550 - total flux cleaned = 0.00248374 Jy ! Component: 3600 - total flux cleaned = 0.00249919 Jy ! Component: 3650 - total flux cleaned = 0.00256013 Jy ! Component: 3700 - total flux cleaned = 0.0026055 Jy ! Component: 3750 - total flux cleaned = 0.00262061 Jy ! Component: 3800 - total flux cleaned = 0.00266569 Jy ! Component: 3850 - total flux cleaned = 0.00266568 Jy ! Component: 3900 - total flux cleaned = 0.00271014 Jy ! Component: 3950 - total flux cleaned = 0.00272479 Jy ! Component: 4000 - total flux cleaned = 0.00276874 Jy ! Component: 4050 - total flux cleaned = 0.00278339 Jy ! Total flux subtracted in 4096 components = 0.00276889 Jy ! Clean residual min=-0.000834 max=0.000755 Jy/beam ! Clean residual mean=0.000005 rms=0.000261 Jy/beam ! Combined flux in latest and established models = 0.0983059 Jy keep ! Adding 289 model components to the UV plane model. ! The established model now contains 394 components and 0.0983059 Jy ![Exited script file: muppet] wmap "J0527-2258_S_2017_06_15_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.04 x 7.738 at -3.343 degrees (North through East) ! Clean map min=-0.0017518 max=0.073574 Jy/beam ! Writing clean map to FITS file: J0527-2258_S_2017_06_15_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0735742 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000261893 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.06787 1.06787 2.13575 4.27149 8.54299 17.086 34.172 68.3439 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.073 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.04 x 7.738 at -3.343 degrees (North through East) ! Clean map min=-0.0017518 max=0.073574 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0527-2258_S_2017_06_15_pus_uvs.log closed on Tue May 7 15:12:13 2019