! Started logfile: J0527+0331_S_2017_06_15_pus_uvs.log on Tue May 7 15:12:03 2019 obs J0527+0331_S_2017_06_15_pus_uva.fits ! Reading UV FITS file: J0527+0331_S_2017_06_15_pus_uva.fits ! AN table 1: 8 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.852778 visibilities/baseline/integration-bin. ! Found source: J0527+0331 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 603 lines of history. ! ! Reading 1228 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0527+0331_S_2017_06_15_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 7 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 15 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 7 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 47 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.808436Jy sigma=0.007269 ! Fit after self-cal, rms=0.799591Jy sigma=0.007193 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.505 mas, bmaj=7.247 mas, bpa=-5.941 degrees ! Estimated noise=3175.46 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.148986 Jy ! Component: 100 - total flux cleaned = 0.195869 Jy ! Total flux subtracted in 100 components = 0.195869 Jy ! Clean residual min=-0.011947 max=0.021858 Jy/beam ! Clean residual mean=0.000055 rms=0.003939 Jy/beam ! Combined flux in latest and established models = 0.195869 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.195869 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089150Jy sigma=0.000777 ! Fit after self-cal, rms=0.089123Jy sigma=0.000776 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.019 mas, bmaj=8.081 mas, bpa=-4.124 degrees ! Estimated noise=2609.8 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0312019 Jy ! Component: 100 - total flux cleaned = 0.0463084 Jy ! Component: 150 - total flux cleaned = 0.0546204 Jy ! Component: 200 - total flux cleaned = 0.0595779 Jy ! Total flux subtracted in 200 components = 0.0595779 Jy ! Clean residual min=-0.006504 max=0.006675 Jy/beam ! Clean residual mean=0.000021 rms=0.001732 Jy/beam ! Combined flux in latest and established models = 0.255447 Jy ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 52 components and 0.255447 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078787Jy sigma=0.000673 ! Fit after self-cal, rms=0.078800Jy sigma=0.000673 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 0.97 HN 0.97 KP 0.99 ! LA 1.03 MK 1.08 NL 0.85 OV 1.00 ! PT 1.02 SC 0.98 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.99 HN 0.99 KP 1.06 ! LA 0.97 MK 1.07 NL 1.03 OV 1.08 ! PT 0.97 SC 1.06 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.08 HN 1.04 KP 0.98 ! LA 0.97 MK 1.03 NL 0.97 OV 0.89 ! PT 0.98 SC 0.96 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.04 HN 0.96 KP 1.00* ! LA 0.86 MK 0.86 NL 1.00* OV 1.00* ! PT 1.00 SC 1.00* ! ! ! Fit before self-cal, rms=0.078800Jy sigma=0.000673 ! Fit after self-cal, rms=0.075398Jy sigma=0.000656 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.047 mas, bmaj=8.121 mas, bpa=-3.989 degrees ! Estimated noise=2597.25 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.11963e-05 Jy ! Component: 100 - total flux cleaned = -7.91065e-05 Jy ! Component: 150 - total flux cleaned = -3.57752e-05 Jy ! Component: 200 - total flux cleaned = -3.71972e-05 Jy ! Total flux subtracted in 200 components = -3.71972e-05 Jy ! Clean residual min=-0.005670 max=0.007156 Jy/beam ! Clean residual mean=-0.000000 rms=0.001538 Jy/beam ! Combined flux in latest and established models = 0.25541 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 60 components and 0.25541 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075345Jy sigma=0.000656 ! Fit after self-cal, rms=0.075330Jy sigma=0.000655 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075330Jy sigma=0.000655 ! Fit after self-cal, rms=0.075293Jy sigma=0.000655 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.048 mas, bmaj=8.125 mas, bpa=-4.014 degrees ! Estimated noise=2595.36 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000258168 Jy ! Component: 100 - total flux cleaned = -0.000260426 Jy ! Component: 150 - total flux cleaned = -0.000258866 Jy ! Component: 200 - total flux cleaned = -0.000258552 Jy ! Total flux subtracted in 200 components = -0.000258552 Jy ! Clean residual min=-0.005549 max=0.007109 Jy/beam ! Clean residual mean=-0.000000 rms=0.001525 Jy/beam ! Combined flux in latest and established models = 0.255151 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 60 components and 0.255151 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075253Jy sigma=0.000655 ! Fit after self-cal, rms=0.075250Jy sigma=0.000655 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (23, 70). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00288973 Jy ! Component: 100 - total flux cleaned = 0.00305964 Jy ! Component: 150 - total flux cleaned = 0.00269714 Jy ! Component: 200 - total flux cleaned = 0.00260353 Jy ! Total flux subtracted in 200 components = 0.00260353 Jy ! Clean residual min=-0.005676 max=0.005356 Jy/beam ! Clean residual mean=0.000003 rms=0.001319 Jy/beam ! Combined flux in latest and established models = 0.257755 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 78 components and 0.257755 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074527Jy sigma=0.000649 ! Fit after self-cal, rms=0.074517Jy sigma=0.000649 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074517Jy sigma=0.000649 ! Fit after self-cal, rms=0.074326Jy sigma=0.000649 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.045 mas, bmaj=8.132 mas, bpa=-4.136 degrees ! Estimated noise=2586.51 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00072863 Jy ! Component: 100 - total flux cleaned = 0.000580591 Jy ! Component: 150 - total flux cleaned = 0.000578581 Jy ! Component: 200 - total flux cleaned = 0.000522289 Jy ! Total flux subtracted in 200 components = 0.000522289 Jy ! Clean residual min=-0.005558 max=0.005080 Jy/beam ! Clean residual mean=0.000000 rms=0.001266 Jy/beam ! Combined flux in latest and established models = 0.258277 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 89 components and 0.258277 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074202Jy sigma=0.000648 ! Fit after self-cal, rms=0.074207Jy sigma=0.000648 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000117634 Jy ! Component: 100 - total flux cleaned = 0.000209894 Jy ! Component: 150 - total flux cleaned = 0.000295961 Jy ! Component: 200 - total flux cleaned = 0.000415792 Jy ! Total flux subtracted in 200 components = 0.000415792 Jy ! Clean residual min=-0.005434 max=0.005026 Jy/beam ! Clean residual mean=0.000000 rms=0.001249 Jy/beam ! Combined flux in latest and established models = 0.258693 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 96 components and 0.258693 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074158Jy sigma=0.000647 ! Fit after self-cal, rms=0.074160Jy sigma=0.000647 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074160Jy sigma=0.000647 ! Fit after self-cal, rms=0.074218Jy sigma=0.000647 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.583 mas, bmaj=13.25 mas, bpa=-2.451 degrees ! Estimated noise=3229.64 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00196077 Jy ! Component: 100 - total flux cleaned = 0.0025728 Jy ! Component: 150 - total flux cleaned = 0.00250273 Jy ! Component: 200 - total flux cleaned = 0.00243647 Jy ! Total flux subtracted in 200 components = 0.00243647 Jy ! Clean residual min=-0.005243 max=0.004846 Jy/beam ! Clean residual mean=-0.000005 rms=0.001484 Jy/beam ! Combined flux in latest and established models = 0.261129 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 107 components and 0.261129 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074230Jy sigma=0.000647 ! Fit after self-cal, rms=0.074223Jy sigma=0.000647 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000191498 Jy ! Component: 100 - total flux cleaned = 0.00019513 Jy ! Component: 150 - total flux cleaned = 0.000136228 Jy ! Component: 200 - total flux cleaned = 0.000135137 Jy ! Total flux subtracted in 200 components = 0.000135137 Jy ! Clean residual min=-0.005214 max=0.004833 Jy/beam ! Clean residual mean=-0.000004 rms=0.001479 Jy/beam ! Combined flux in latest and established models = 0.261264 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 113 components and 0.261264 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074246Jy sigma=0.000647 ! Fit after self-cal, rms=0.074241Jy sigma=0.000647 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.044 mas, bmaj=8.138 mas, bpa=-4.227 degrees ! Estimated noise=2588.01 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.044 x 8.138 at -4.227 degrees (North through East) ! Clean map min=-0.0049977 max=0.19889 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.519 mas, bmaj=7.274 mas, bpa=-6.032 degrees ! Estimated noise=3163.69 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.148207 Jy ! Component: 100 - total flux cleaned = 0.194334 Jy ! Component: 150 - total flux cleaned = 0.218384 Jy ! Component: 200 - total flux cleaned = 0.232181 Jy ! Total flux subtracted in 200 components = 0.232181 Jy ! Clean residual min=-0.008236 max=0.008845 Jy/beam ! Clean residual mean=0.000021 rms=0.002308 Jy/beam ! Combined flux in latest and established models = 0.232181 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 28 model components to the UV plane model. ! The established model now contains 28 components and 0.232181 Jy ! Inverting map and beam ! Estimated beam: bmin=3.044 mas, bmaj=8.138 mas, bpa=-4.227 degrees ! Estimated noise=2588.01 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-3, -1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0115334 Jy ! Component: 100 - total flux cleaned = 0.0154864 Jy ! Component: 150 - total flux cleaned = 0.0183224 Jy ! Component: 200 - total flux cleaned = 0.0202765 Jy ! Total flux subtracted in 200 components = 0.0202765 Jy ! Clean residual min=-0.005489 max=0.005474 Jy/beam ! Clean residual mean=0.000009 rms=0.001389 Jy/beam ! Combined flux in latest and established models = 0.252457 Jy ! Adding 34 model components to the UV plane model. ! The established model now contains 53 components and 0.252457 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.583 mas, bmaj=13.25 mas, bpa=-2.451 degrees ! Estimated noise=3229.64 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00467683 Jy ! Component: 100 - total flux cleaned = 0.00635137 Jy ! Component: 150 - total flux cleaned = 0.00680571 Jy ! Component: 200 - total flux cleaned = 0.00699446 Jy ! Total flux subtracted in 200 components = 0.00699446 Jy ! Clean residual min=-0.005182 max=0.004593 Jy/beam ! Clean residual mean=-0.000001 rms=0.001483 Jy/beam ! Combined flux in latest and established models = 0.259452 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.66623e-05 Jy ! Component: 100 - total flux cleaned = 5.66746e-05 Jy ! Component: 150 - total flux cleaned = 0.000108132 Jy ! Component: 200 - total flux cleaned = 0.000157121 Jy ! Total flux subtracted in 200 components = 0.000157121 Jy ! Clean residual min=-0.005114 max=0.004591 Jy/beam ! Clean residual mean=-0.000003 rms=0.001452 Jy/beam ! Combined flux in latest and established models = 0.259609 Jy ! Adding 47 model components to the UV plane model. ! The established model now contains 91 components and 0.259609 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.044 mas, bmaj=8.138 mas, bpa=-4.227 degrees ! Estimated noise=2588.01 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000743297 Jy ! Component: 100 - total flux cleaned = 0.000452335 Jy ! Component: 150 - total flux cleaned = 0.000605024 Jy ! Component: 200 - total flux cleaned = 0.000395105 Jy ! Total flux subtracted in 200 components = 0.000395105 Jy ! Clean residual min=-0.005086 max=0.004695 Jy/beam ! Clean residual mean=-0.000000 rms=0.001206 Jy/beam ! Combined flux in latest and established models = 0.260004 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 110 components and 0.260004 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074162Jy sigma=0.000646 ! Fit after self-cal, rms=0.074131Jy sigma=0.000646 wmodel J0527+0331_S_2017_06_15_pus_map.mod ! Writing 110 model components to file: J0527+0331_S_2017_06_15_pus_map.mod wobs J0527+0331_S_2017_06_15_pus_uvs.fits ! Writing UV FITS file: J0527+0331_S_2017_06_15_pus_uvs.fits wwins J0527+0331_S_2017_06_15_pus_map.win ! wwins: Wrote 3 windows to J0527+0331_S_2017_06_15_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -4.85332e-05 Jy ! Component: 100 - total flux cleaned = 0.000762896 Jy ! Component: 150 - total flux cleaned = 0.00181853 Jy ! Component: 200 - total flux cleaned = 0.0022476 Jy ! Component: 250 - total flux cleaned = 0.00258579 Jy ! Component: 300 - total flux cleaned = 0.00304176 Jy ! Component: 350 - total flux cleaned = 0.00354445 Jy ! Component: 400 - total flux cleaned = 0.00390795 Jy ! Component: 450 - total flux cleaned = 0.00420016 Jy ! Component: 500 - total flux cleaned = 0.00448232 Jy ! Component: 550 - total flux cleaned = 0.00470098 Jy ! Component: 600 - total flux cleaned = 0.00480758 Jy ! Component: 650 - total flux cleaned = 0.00506616 Jy ! Component: 700 - total flux cleaned = 0.00536768 Jy ! Component: 750 - total flux cleaned = 0.00551541 Jy ! Component: 800 - total flux cleaned = 0.00589862 Jy ! Component: 850 - total flux cleaned = 0.00613269 Jy ! Component: 900 - total flux cleaned = 0.00645387 Jy ! Component: 950 - total flux cleaned = 0.00658913 Jy ! Component: 1000 - total flux cleaned = 0.00694044 Jy ! Component: 1050 - total flux cleaned = 0.00707049 Jy ! Component: 1100 - total flux cleaned = 0.00736706 Jy ! Component: 1150 - total flux cleaned = 0.00740794 Jy ! Component: 1200 - total flux cleaned = 0.00744807 Jy ! Component: 1250 - total flux cleaned = 0.00744711 Jy ! Component: 1300 - total flux cleaned = 0.00740762 Jy ! Component: 1350 - total flux cleaned = 0.00744609 Jy ! Component: 1400 - total flux cleaned = 0.0074461 Jy ! Component: 1450 - total flux cleaned = 0.00737216 Jy ! Component: 1500 - total flux cleaned = 0.00744584 Jy ! Component: 1550 - total flux cleaned = 0.00741002 Jy ! Component: 1600 - total flux cleaned = 0.0073744 Jy ! Component: 1650 - total flux cleaned = 0.00734038 Jy ! Component: 1700 - total flux cleaned = 0.00727161 Jy ! Component: 1750 - total flux cleaned = 0.00716926 Jy ! Component: 1800 - total flux cleaned = 0.00700113 Jy ! Component: 1850 - total flux cleaned = 0.00686864 Jy ! Component: 1900 - total flux cleaned = 0.00673731 Jy ! Component: 1950 - total flux cleaned = 0.00660752 Jy ! Component: 2000 - total flux cleaned = 0.00651137 Jy ! Component: 2050 - total flux cleaned = 0.0064482 Jy ! Component: 2100 - total flux cleaned = 0.0062295 Jy ! Component: 2150 - total flux cleaned = 0.00616848 Jy ! Component: 2200 - total flux cleaned = 0.00598535 Jy ! Component: 2250 - total flux cleaned = 0.00589466 Jy ! Component: 2300 - total flux cleaned = 0.00574494 Jy ! Component: 2350 - total flux cleaned = 0.00553735 Jy ! Component: 2400 - total flux cleaned = 0.00536113 Jy ! Component: 2450 - total flux cleaned = 0.0052739 Jy ! Component: 2500 - total flux cleaned = 0.00515853 Jy ! Component: 2550 - total flux cleaned = 0.00504415 Jy ! Component: 2600 - total flux cleaned = 0.00498752 Jy ! Component: 2650 - total flux cleaned = 0.00481857 Jy ! Component: 2700 - total flux cleaned = 0.00470688 Jy ! Component: 2750 - total flux cleaned = 0.00465124 Jy ! Component: 2800 - total flux cleaned = 0.00448601 Jy ! Component: 2850 - total flux cleaned = 0.00451324 Jy ! Component: 2900 - total flux cleaned = 0.00445887 Jy ! Component: 2950 - total flux cleaned = 0.00437785 Jy ! Component: 3000 - total flux cleaned = 0.0042439 Jy ! Component: 3050 - total flux cleaned = 0.00424367 Jy ! Component: 3100 - total flux cleaned = 0.0041643 Jy ! Component: 3150 - total flux cleaned = 0.00416403 Jy ! Component: 3200 - total flux cleaned = 0.00398116 Jy ! Component: 3250 - total flux cleaned = 0.00395523 Jy ! Component: 3300 - total flux cleaned = 0.00385204 Jy ! Component: 3350 - total flux cleaned = 0.0038008 Jy ! Component: 3400 - total flux cleaned = 0.00364777 Jy ! Component: 3450 - total flux cleaned = 0.00359701 Jy ! Component: 3500 - total flux cleaned = 0.00347088 Jy ! Component: 3550 - total flux cleaned = 0.00332018 Jy ! Component: 3600 - total flux cleaned = 0.00322044 Jy ! Component: 3650 - total flux cleaned = 0.00312085 Jy ! Component: 3700 - total flux cleaned = 0.00297235 Jy ! Component: 3750 - total flux cleaned = 0.00292313 Jy ! Component: 3800 - total flux cleaned = 0.00277596 Jy ! Component: 3850 - total flux cleaned = 0.00267841 Jy ! Component: 3900 - total flux cleaned = 0.00260546 Jy ! Component: 3950 - total flux cleaned = 0.00250856 Jy ! Component: 4000 - total flux cleaned = 0.00238819 Jy ! Component: 4050 - total flux cleaned = 0.00224407 Jy ! Total flux subtracted in 4096 components = 0.00219617 Jy ! Clean residual min=-0.001634 max=0.001392 Jy/beam ! Clean residual mean=0.000003 rms=0.000412 Jy/beam ! Combined flux in latest and established models = 0.2622 Jy keep ! Adding 254 model components to the UV plane model. ! The established model now contains 364 components and 0.2622 Jy ![Exited script file: muppet] wmap "J0527+0331_S_2017_06_15_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.044 x 8.138 at -4.227 degrees (North through East) ! Clean map min=-0.0040686 max=0.19978 Jy/beam ! Writing clean map to FITS file: J0527+0331_S_2017_06_15_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.19978 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000414435 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.622338 0.622338 1.24468 2.48935 4.9787 9.95741 19.9148 39.8296 79.6593 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0012 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.199 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.044 x 8.138 at -4.227 degrees (North through East) ! Clean map min=-0.0040686 max=0.19978 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0527+0331_S_2017_06_15_pus_uvs.log closed on Tue May 7 15:12:07 2019