! Started logfile: J0527+0331_S_2017_02_24_pus_uvs.log on Sat May 4 11:19:07 2019 obs J0527+0331_S_2017_02_24_pus_uva.fits ! Reading UV FITS file: J0527+0331_S_2017_02_24_pus_uva.fits ! AN table 1: 8 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.3 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0527+0331 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 823 lines of history. ! ! Reading 432 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0527+0331_S_2017_02_24_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 35 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 35 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 35 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 45 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.718400Jy sigma=0.006527 ! Fit after self-cal, rms=0.716846Jy sigma=0.006515 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.107 mas, bmaj=20.89 mas, bpa=-20.16 degrees ! Estimated noise=5161.62 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.213106 Jy ! Component: 100 - total flux cleaned = 0.271847 Jy ! Total flux subtracted in 100 components = 0.271847 Jy ! Clean residual min=-0.018917 max=0.026022 Jy/beam ! Clean residual mean=-0.000770 rms=0.007548 Jy/beam ! Combined flux in latest and established models = 0.271847 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.271847 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085528Jy sigma=0.000745 ! Fit after self-cal, rms=0.085457Jy sigma=0.000744 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.838 mas, bmaj=20.53 mas, bpa=-19.91 degrees ! Estimated noise=3954.74 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0306271 Jy ! Component: 100 - total flux cleaned = 0.0436806 Jy ! Component: 150 - total flux cleaned = 0.0517302 Jy ! Component: 200 - total flux cleaned = 0.0572994 Jy ! Total flux subtracted in 200 components = 0.0572994 Jy ! Clean residual min=-0.010998 max=0.007631 Jy/beam ! Clean residual mean=-0.000186 rms=0.003056 Jy/beam ! Combined flux in latest and established models = 0.329146 Jy ! Performing phase self-cal ! Adding 61 model components to the UV plane model. ! The established model now contains 63 components and 0.329146 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074190Jy sigma=0.000651 ! Fit after self-cal, rms=0.074171Jy sigma=0.000651 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.04 HN 1.00* KP 0.97 ! LA 0.95 MK 1.02 NL 1.00* OV 1.00 ! PT 1.06 SC 1.00* ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.93 HN 1.00* KP 0.96 ! LA 0.91 MK 0.98 NL 1.00* OV 1.12 ! PT 1.00 SC 1.00* ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00 HN 1.00* KP 1.08 ! LA 1.04 MK 1.05 NL 1.00* OV 0.99 ! PT 0.96 SC 1.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.02 HN 1.00* KP 1.00* ! LA 0.89 MK 0.97 NL 1.00* OV 1.00 ! PT 1.00 SC 1.00* ! ! ! Fit before self-cal, rms=0.074171Jy sigma=0.000651 ! Fit after self-cal, rms=0.070211Jy sigma=0.000627 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.805 mas, bmaj=20.48 mas, bpa=-19.9 degrees ! Estimated noise=3986.71 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00200953 Jy ! Component: 100 - total flux cleaned = -0.00277675 Jy ! Component: 150 - total flux cleaned = -0.00297808 Jy ! Component: 200 - total flux cleaned = -0.00315445 Jy ! Total flux subtracted in 200 components = -0.00315445 Jy ! Clean residual min=-0.008960 max=0.006018 Jy/beam ! Clean residual mean=-0.000006 rms=0.002259 Jy/beam ! Combined flux in latest and established models = 0.325991 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 77 components and 0.325992 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070146Jy sigma=0.000626 ! Fit after self-cal, rms=0.070140Jy sigma=0.000626 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070140Jy sigma=0.000626 ! Fit after self-cal, rms=0.070155Jy sigma=0.000626 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.808 mas, bmaj=20.5 mas, bpa=-19.89 degrees ! Estimated noise=3986.93 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00101895 Jy ! Component: 100 - total flux cleaned = -0.00140906 Jy ! Component: 150 - total flux cleaned = -0.00159568 Jy ! Component: 200 - total flux cleaned = -0.00167214 Jy ! Total flux subtracted in 200 components = -0.00167214 Jy ! Clean residual min=-0.008942 max=0.005861 Jy/beam ! Clean residual mean=-0.000005 rms=0.002240 Jy/beam ! Combined flux in latest and established models = 0.324319 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 87 components and 0.324319 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070135Jy sigma=0.000626 ! Fit after self-cal, rms=0.070132Jy sigma=0.000626 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00023858 Jy ! Component: 100 - total flux cleaned = -0.000237961 Jy ! Component: 150 - total flux cleaned = -0.000261168 Jy ! Component: 200 - total flux cleaned = -0.000283944 Jy ! Total flux subtracted in 200 components = -0.000283944 Jy ! Clean residual min=-0.008898 max=0.005807 Jy/beam ! Clean residual mean=-0.000006 rms=0.002228 Jy/beam ! Combined flux in latest and established models = 0.324035 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 94 components and 0.324035 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070120Jy sigma=0.000626 ! Fit after self-cal, rms=0.070118Jy sigma=0.000626 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070118Jy sigma=0.000626 ! Fit after self-cal, rms=0.070080Jy sigma=0.000626 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.808 mas, bmaj=20.5 mas, bpa=-19.9 degrees ! Estimated noise=3984.1 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000545032 Jy ! Component: 100 - total flux cleaned = -0.000725309 Jy ! Component: 150 - total flux cleaned = -0.000810349 Jy ! Component: 200 - total flux cleaned = -0.00085194 Jy ! Total flux subtracted in 200 components = -0.00085194 Jy ! Clean residual min=-0.008879 max=0.005762 Jy/beam ! Clean residual mean=-0.000004 rms=0.002216 Jy/beam ! Combined flux in latest and established models = 0.323184 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 97 components and 0.323184 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070068Jy sigma=0.000626 ! Fit after self-cal, rms=0.070066Jy sigma=0.000626 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000178655 Jy ! Component: 100 - total flux cleaned = -0.000218157 Jy ! Component: 150 - total flux cleaned = -0.000236829 Jy ! Component: 200 - total flux cleaned = -0.000273777 Jy ! Total flux subtracted in 200 components = -0.000273777 Jy ! Clean residual min=-0.008839 max=0.005718 Jy/beam ! Clean residual mean=-0.000005 rms=0.002208 Jy/beam ! Combined flux in latest and established models = 0.32291 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 99 components and 0.32291 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070058Jy sigma=0.000626 ! Fit after self-cal, rms=0.070056Jy sigma=0.000626 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070056Jy sigma=0.000626 ! Fit after self-cal, rms=0.070005Jy sigma=0.000626 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=10.76 mas, bmaj=22.25 mas, bpa=-1.831 degrees ! Estimated noise=4762.66 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00061347 Jy ! Component: 100 - total flux cleaned = -0.000706337 Jy ! Component: 150 - total flux cleaned = -0.000771565 Jy ! Component: 200 - total flux cleaned = -0.000854965 Jy ! Total flux subtracted in 200 components = -0.000854965 Jy ! Clean residual min=-0.010898 max=0.007484 Jy/beam ! Clean residual mean=-0.000004 rms=0.003041 Jy/beam ! Combined flux in latest and established models = 0.322055 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 104 components and 0.322055 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070002Jy sigma=0.000626 ! Fit after self-cal, rms=0.069994Jy sigma=0.000626 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000325553 Jy ! Component: 100 - total flux cleaned = -0.000325768 Jy ! Component: 150 - total flux cleaned = -0.00030493 Jy ! Component: 200 - total flux cleaned = -0.000304586 Jy ! Total flux subtracted in 200 components = -0.000304586 Jy ! Clean residual min=-0.010857 max=0.007456 Jy/beam ! Clean residual mean=-0.000005 rms=0.003022 Jy/beam ! Combined flux in latest and established models = 0.32175 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 109 components and 0.32175 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069994Jy sigma=0.000626 ! Fit after self-cal, rms=0.069987Jy sigma=0.000626 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.808 mas, bmaj=20.51 mas, bpa=-19.9 degrees ! Estimated noise=3980.82 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.808 x 20.51 at -19.9 degrees (North through East) ! Clean map min=-0.0086145 max=0.27825 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.113 mas, bmaj=21.09 mas, bpa=-20.2 degrees ! Estimated noise=5102.21 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.209925 Jy ! Component: 100 - total flux cleaned = 0.267088 Jy ! Component: 150 - total flux cleaned = 0.294053 Jy ! Component: 200 - total flux cleaned = 0.307135 Jy ! Total flux subtracted in 200 components = 0.307135 Jy ! Clean residual min=-0.011151 max=0.007779 Jy/beam ! Clean residual mean=-0.000196 rms=0.003115 Jy/beam ! Combined flux in latest and established models = 0.307135 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.307135 Jy ! Inverting map and beam ! Estimated beam: bmin=3.808 mas, bmaj=20.51 mas, bpa=-19.9 degrees ! Estimated noise=3980.82 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00741631 Jy ! Component: 100 - total flux cleaned = 0.0115881 Jy ! Component: 150 - total flux cleaned = 0.014411 Jy ! Component: 200 - total flux cleaned = 0.0159227 Jy ! Total flux subtracted in 200 components = 0.0159227 Jy ! Clean residual min=-0.008665 max=0.006165 Jy/beam ! Clean residual mean=-0.000012 rms=0.002302 Jy/beam ! Combined flux in latest and established models = 0.323058 Jy ! Adding 31 model components to the UV plane model. ! The established model now contains 49 components and 0.323058 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=10.76 mas, bmaj=22.25 mas, bpa=-1.831 degrees ! Estimated noise=4762.66 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000374637 Jy ! Component: 100 - total flux cleaned = 0.000272739 Jy ! Component: 150 - total flux cleaned = -2.11677e-05 Jy ! Component: 200 - total flux cleaned = -0.000200394 Jy ! Total flux subtracted in 200 components = -0.000200394 Jy ! Clean residual min=-0.010814 max=0.007636 Jy/beam ! Clean residual mean=-0.000008 rms=0.003108 Jy/beam ! Combined flux in latest and established models = 0.322857 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000208512 Jy ! Component: 100 - total flux cleaned = -0.000401826 Jy ! Component: 150 - total flux cleaned = -0.000511244 Jy ! Component: 200 - total flux cleaned = -0.000580247 Jy ! Total flux subtracted in 200 components = -0.000580247 Jy ! Clean residual min=-0.010825 max=0.007521 Jy/beam ! Clean residual mean=-0.000010 rms=0.003066 Jy/beam ! Combined flux in latest and established models = 0.322277 Jy ! Adding 32 model components to the UV plane model. ! The established model now contains 80 components and 0.322277 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.808 mas, bmaj=20.51 mas, bpa=-19.9 degrees ! Estimated noise=3980.82 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000420542 Jy ! Component: 100 - total flux cleaned = 0.000692995 Jy ! Component: 150 - total flux cleaned = 0.000773218 Jy ! Component: 200 - total flux cleaned = 0.000878329 Jy ! Total flux subtracted in 200 components = 0.000878329 Jy ! Clean residual min=-0.008569 max=0.005804 Jy/beam ! Clean residual mean=0.000003 rms=0.002203 Jy/beam ! Combined flux in latest and established models = 0.323155 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 94 components and 0.323155 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070003Jy sigma=0.000626 ! Fit after self-cal, rms=0.069998Jy sigma=0.000626 wmodel J0527+0331_S_2017_02_24_pus_map.mod ! Writing 94 model components to file: J0527+0331_S_2017_02_24_pus_map.mod wobs J0527+0331_S_2017_02_24_pus_uvs.fits ! Writing UV FITS file: J0527+0331_S_2017_02_24_pus_uvs.fits wwins J0527+0331_S_2017_02_24_pus_map.win ! wwins: Wrote 1 windows to J0527+0331_S_2017_02_24_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00365178 Jy ! Component: 100 - total flux cleaned = -0.00641874 Jy ! Component: 150 - total flux cleaned = -0.00762528 Jy ! Component: 200 - total flux cleaned = -0.00810895 Jy ! Component: 250 - total flux cleaned = -0.00839522 Jy ! Component: 300 - total flux cleaned = -0.00807329 Jy ! Component: 350 - total flux cleaned = -0.00777764 Jy ! Component: 400 - total flux cleaned = -0.00755838 Jy ! Component: 450 - total flux cleaned = -0.00719531 Jy ! Component: 500 - total flux cleaned = -0.00695313 Jy ! Component: 550 - total flux cleaned = -0.00672083 Jy ! Component: 600 - total flux cleaned = -0.00663031 Jy ! Component: 650 - total flux cleaned = -0.00658733 Jy ! Component: 700 - total flux cleaned = -0.00666945 Jy ! Component: 750 - total flux cleaned = -0.00674902 Jy ! Component: 800 - total flux cleaned = -0.00682533 Jy ! Component: 850 - total flux cleaned = -0.0069373 Jy ! Component: 900 - total flux cleaned = -0.00700999 Jy ! Component: 950 - total flux cleaned = -0.00718683 Jy ! Component: 1000 - total flux cleaned = -0.00735876 Jy ! Component: 1050 - total flux cleaned = -0.00746031 Jy ! Component: 1100 - total flux cleaned = -0.00759268 Jy ! Component: 1150 - total flux cleaned = -0.0076581 Jy ! Component: 1200 - total flux cleaned = -0.007754 Jy ! Component: 1250 - total flux cleaned = -0.00781728 Jy ! Component: 1300 - total flux cleaned = -0.00791063 Jy ! Component: 1350 - total flux cleaned = -0.00784956 Jy ! Component: 1400 - total flux cleaned = -0.00784953 Jy ! Component: 1450 - total flux cleaned = -0.0078798 Jy ! Component: 1500 - total flux cleaned = -0.00790987 Jy ! Component: 1550 - total flux cleaned = -0.00793948 Jy ! Component: 1600 - total flux cleaned = -0.00793938 Jy ! Component: 1650 - total flux cleaned = -0.00796914 Jy ! Component: 1700 - total flux cleaned = -0.00796898 Jy ! Component: 1750 - total flux cleaned = -0.00796894 Jy ! Component: 1800 - total flux cleaned = -0.00793943 Jy ! Component: 1850 - total flux cleaned = -0.00788063 Jy ! Component: 1900 - total flux cleaned = -0.00785069 Jy ! Component: 1950 - total flux cleaned = -0.00779066 Jy ! Component: 2000 - total flux cleaned = -0.00775963 Jy ! Component: 2050 - total flux cleaned = -0.00775992 Jy ! Component: 2100 - total flux cleaned = -0.0076975 Jy ! Component: 2150 - total flux cleaned = -0.00769729 Jy ! Component: 2200 - total flux cleaned = -0.00766537 Jy ! Component: 2250 - total flux cleaned = -0.00766547 Jy ! Component: 2300 - total flux cleaned = -0.00769872 Jy ! Component: 2350 - total flux cleaned = -0.00769871 Jy ! Component: 2400 - total flux cleaned = -0.00769822 Jy ! Component: 2450 - total flux cleaned = -0.00773301 Jy ! Component: 2500 - total flux cleaned = -0.00769685 Jy ! Component: 2550 - total flux cleaned = -0.00769679 Jy ! Component: 2600 - total flux cleaned = -0.00769677 Jy ! Component: 2650 - total flux cleaned = -0.00765847 Jy ! Component: 2700 - total flux cleaned = -0.00761911 Jy ! Component: 2750 - total flux cleaned = -0.00757873 Jy ! Component: 2800 - total flux cleaned = -0.00753707 Jy ! Component: 2850 - total flux cleaned = -0.00753746 Jy ! Component: 2900 - total flux cleaned = -0.00745067 Jy ! Component: 2950 - total flux cleaned = -0.00740597 Jy ! Component: 3000 - total flux cleaned = -0.00731452 Jy ! Component: 3050 - total flux cleaned = -0.00726709 Jy ! Component: 3100 - total flux cleaned = -0.00721842 Jy ! Component: 3150 - total flux cleaned = -0.00711889 Jy ! Component: 3200 - total flux cleaned = -0.00706787 Jy ! Component: 3250 - total flux cleaned = -0.00696278 Jy ! Component: 3300 - total flux cleaned = -0.00690852 Jy ! Component: 3350 - total flux cleaned = -0.00679755 Jy ! Component: 3400 - total flux cleaned = -0.00673986 Jy ! Component: 3450 - total flux cleaned = -0.00662215 Jy ! Component: 3500 - total flux cleaned = -0.0065613 Jy ! Component: 3550 - total flux cleaned = -0.00649925 Jy ! Component: 3600 - total flux cleaned = -0.00637157 Jy ! Component: 3650 - total flux cleaned = -0.00623844 Jy ! Component: 3700 - total flux cleaned = -0.00617054 Jy ! Component: 3750 - total flux cleaned = -0.00603002 Jy ! Component: 3800 - total flux cleaned = -0.00595741 Jy ! Component: 3850 - total flux cleaned = -0.00588399 Jy ! Component: 3900 - total flux cleaned = -0.00573095 Jy ! Component: 3950 - total flux cleaned = -0.0055736 Jy ! Component: 4000 - total flux cleaned = -0.00557315 Jy ! Component: 4050 - total flux cleaned = -0.00540592 Jy ! Total flux subtracted in 4096 components = -0.0052349 Jy ! Clean residual min=-0.004630 max=0.004805 Jy/beam ! Clean residual mean=-0.000007 rms=0.001379 Jy/beam ! Combined flux in latest and established models = 0.31792 Jy keep ! Adding 240 model components to the UV plane model. ! The established model now contains 334 components and 0.31792 Jy ![Exited script file: muppet] wmap "J0527+0331_S_2017_02_24_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.808 x 20.51 at -19.9 degrees (North through East) ! Clean map min=-0.0087826 max=0.27713 Jy/beam ! Writing clean map to FITS file: J0527+0331_S_2017_02_24_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.277133 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00144393 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.56307 1.56307 3.12614 6.25229 12.5046 25.0092 50.0183 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0043 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.277 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.808 x 20.51 at -19.9 degrees (North through East) ! Clean map min=-0.0087826 max=0.27713 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0527+0331_S_2017_02_24_pus_uvs.log closed on Sat May 4 11:19:12 2019