! Started logfile: J0526-2342_S_2017_10_09_pus_uvs.log on Sun May 12 13:05:06 2019 obs J0526-2342_S_2017_10_09_pus_uva.fits ! Reading UV FITS file: J0526-2342_S_2017_10_09_pus_uva.fits ! AN table 1: 115 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.75 visibilities/baseline/integration-bin. ! Found source: J0526-2342 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 496 lines of history. ! ! Reading 12420 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0526-2342_S_2017_10_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 133 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 190 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 190 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 598 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.878269Jy sigma=0.006842 ! Fit after self-cal, rms=0.866710Jy sigma=0.006755 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.631 mas, bmaj=12.91 mas, bpa=-20.46 degrees ! Estimated noise=1477.33 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.101612 Jy ! Component: 100 - total flux cleaned = 0.127564 Jy ! Total flux subtracted in 100 components = 0.127564 Jy ! Clean residual min=-0.009345 max=0.012056 Jy/beam ! Clean residual mean=-0.000040 rms=0.002621 Jy/beam ! Combined flux in latest and established models = 0.127564 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 27 components and 0.127564 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103829Jy sigma=0.000734 ! Fit after self-cal, rms=0.103802Jy sigma=0.000733 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.045 mas, bmaj=14.25 mas, bpa=-19.05 degrees ! Estimated noise=976.796 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0209988 Jy ! Component: 100 - total flux cleaned = 0.0336511 Jy ! Component: 150 - total flux cleaned = 0.042292 Jy ! Component: 200 - total flux cleaned = 0.0484093 Jy ! Total flux subtracted in 200 components = 0.0484093 Jy ! Clean residual min=-0.006129 max=0.006977 Jy/beam ! Clean residual mean=-0.000032 rms=0.001742 Jy/beam ! Combined flux in latest and established models = 0.175974 Jy ! Performing phase self-cal ! Adding 50 model components to the UV plane model. ! The established model now contains 74 components and 0.175974 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098861Jy sigma=0.000695 ! Fit after self-cal, rms=0.098752Jy sigma=0.000695 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.88 HN 1.04 KP 1.07 ! LA 0.99 MK 1.01 NL 0.95 OV 1.00* ! PT 0.99 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.76 FD 0.93 HN 1.01 KP 1.05 ! LA 0.98 MK 1.03 NL 1.11 OV 1.00* ! PT 0.94 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.21 FD 0.98 HN 1.01 KP 0.89 ! LA 0.75 MK 1.05 NL 1.21 OV 1.00* ! PT 0.93 ! ! ! Correcting IF 4. ! A total of 21 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.89 HN 1.07 KP 1.00* ! LA 1.00* MK 0.94 NL 1.00* OV 1.00* ! PT 1.13 ! ! ! Fit before self-cal, rms=0.098752Jy sigma=0.000695 ! Fit after self-cal, rms=0.096934Jy sigma=0.000673 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.078 mas, bmaj=14.9 mas, bpa=-19.14 degrees ! Estimated noise=987.462 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00120442 Jy ! Component: 100 - total flux cleaned = -0.00136173 Jy ! Component: 150 - total flux cleaned = -0.00135733 Jy ! Component: 200 - total flux cleaned = -0.00135342 Jy ! Total flux subtracted in 200 components = -0.00135342 Jy ! Clean residual min=-0.004512 max=0.003727 Jy/beam ! Clean residual mean=0.000006 rms=0.000913 Jy/beam ! Combined flux in latest and established models = 0.17462 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 91 components and 0.17462 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096813Jy sigma=0.000673 ! Fit after self-cal, rms=0.096885Jy sigma=0.000672 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096885Jy sigma=0.000672 ! Fit after self-cal, rms=0.097751Jy sigma=0.000672 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.081 mas, bmaj=15 mas, bpa=-19.17 degrees ! Estimated noise=990.976 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000666904 Jy ! Component: 100 - total flux cleaned = -0.000779116 Jy ! Component: 150 - total flux cleaned = -0.000930711 Jy ! Component: 200 - total flux cleaned = -0.00106479 Jy ! Total flux subtracted in 200 components = -0.00106479 Jy ! Clean residual min=-0.003897 max=0.003661 Jy/beam ! Clean residual mean=0.000006 rms=0.000863 Jy/beam ! Combined flux in latest and established models = 0.173556 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 104 components and 0.173556 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097684Jy sigma=0.000671 ! Fit after self-cal, rms=0.097692Jy sigma=0.000671 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.8043e-05 Jy ! Component: 100 - total flux cleaned = -0.000177312 Jy ! Component: 150 - total flux cleaned = -0.00027862 Jy ! Component: 200 - total flux cleaned = -0.000370189 Jy ! Total flux subtracted in 200 components = -0.000370189 Jy ! Clean residual min=-0.003765 max=0.003552 Jy/beam ! Clean residual mean=0.000005 rms=0.000855 Jy/beam ! Combined flux in latest and established models = 0.173185 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 110 components and 0.173185 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097661Jy sigma=0.000671 ! Fit after self-cal, rms=0.097655Jy sigma=0.000671 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097655Jy sigma=0.000671 ! Fit after self-cal, rms=0.098363Jy sigma=0.000670 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.079 mas, bmaj=15.08 mas, bpa=-19.32 degrees ! Estimated noise=993.363 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000627988 Jy ! Component: 100 - total flux cleaned = -0.000731451 Jy ! Component: 150 - total flux cleaned = -0.000868836 Jy ! Component: 200 - total flux cleaned = -0.000911477 Jy ! Total flux subtracted in 200 components = -0.000911477 Jy ! Clean residual min=-0.002866 max=0.003332 Jy/beam ! Clean residual mean=0.000005 rms=0.000747 Jy/beam ! Combined flux in latest and established models = 0.172274 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 119 components and 0.172274 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098306Jy sigma=0.000669 ! Fit after self-cal, rms=0.098317Jy sigma=0.000669 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (31.5, -10.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00123825 Jy ! Component: 100 - total flux cleaned = 0.00115296 Jy ! Component: 150 - total flux cleaned = 0.00115125 Jy ! Component: 200 - total flux cleaned = 0.00120933 Jy ! Total flux subtracted in 200 components = 0.00120933 Jy ! Clean residual min=-0.002654 max=0.002631 Jy/beam ! Clean residual mean=0.000006 rms=0.000651 Jy/beam ! Combined flux in latest and established models = 0.173483 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 145 components and 0.173483 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098169Jy sigma=0.000668 ! Fit after self-cal, rms=0.098147Jy sigma=0.000668 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098147Jy sigma=0.000668 ! Fit after self-cal, rms=0.098106Jy sigma=0.000668 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.901 mas, bmaj=21.76 mas, bpa=-6.842 degrees ! Estimated noise=1204.05 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00017039 Jy ! Component: 100 - total flux cleaned = 0.0002611 Jy ! Component: 150 - total flux cleaned = 0.000381148 Jy ! Component: 200 - total flux cleaned = 0.000491461 Jy ! Total flux subtracted in 200 components = 0.000491461 Jy ! Clean residual min=-0.002390 max=0.002104 Jy/beam ! Clean residual mean=0.000016 rms=0.000665 Jy/beam ! Combined flux in latest and established models = 0.173975 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 166 components and 0.173975 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098079Jy sigma=0.000668 ! Fit after self-cal, rms=0.098077Jy sigma=0.000668 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000179981 Jy ! Component: 100 - total flux cleaned = 0.000242593 Jy ! Component: 150 - total flux cleaned = 0.000328291 Jy ! Component: 200 - total flux cleaned = 0.000328312 Jy ! Total flux subtracted in 200 components = 0.000328312 Jy ! Clean residual min=-0.002227 max=0.002042 Jy/beam ! Clean residual mean=0.000016 rms=0.000644 Jy/beam ! Combined flux in latest and established models = 0.174303 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 178 components and 0.174303 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098061Jy sigma=0.000668 ! Fit after self-cal, rms=0.098057Jy sigma=0.000668 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.08 mas, bmaj=15.1 mas, bpa=-19.37 degrees ! Estimated noise=991.065 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.08 x 15.1 at -19.37 degrees (North through East) ! Clean map min=-0.0021933 max=0.1308 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.638 mas, bmaj=13.44 mas, bpa=-20.71 degrees ! Estimated noise=1502.7 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.102879 Jy ! Component: 100 - total flux cleaned = 0.127159 Jy ! Component: 150 - total flux cleaned = 0.138905 Jy ! Component: 200 - total flux cleaned = 0.146658 Jy ! Total flux subtracted in 200 components = 0.146658 Jy ! Clean residual min=-0.004378 max=0.005447 Jy/beam ! Clean residual mean=-0.000014 rms=0.001233 Jy/beam ! Combined flux in latest and established models = 0.146658 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 49 model components to the UV plane model. ! The established model now contains 49 components and 0.146658 Jy ! Inverting map and beam ! Estimated beam: bmin=3.08 mas, bmaj=15.1 mas, bpa=-19.37 degrees ! Estimated noise=991.065 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00857629 Jy ! Component: 100 - total flux cleaned = 0.0138712 Jy ! Component: 150 - total flux cleaned = 0.017204 Jy ! Component: 200 - total flux cleaned = 0.0193368 Jy ! Total flux subtracted in 200 components = 0.0193368 Jy ! Clean residual min=-0.002982 max=0.003525 Jy/beam ! Clean residual mean=-0.000003 rms=0.000794 Jy/beam ! Combined flux in latest and established models = 0.165995 Jy ! Adding 41 model components to the UV plane model. ! The established model now contains 85 components and 0.165995 Jy ! Inverting map ! Added new window around map position (21.5, 20). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00232541 Jy ! Component: 100 - total flux cleaned = 0.00358109 Jy ! Component: 150 - total flux cleaned = 0.00444225 Jy ! Component: 200 - total flux cleaned = 0.00528056 Jy ! Total flux subtracted in 200 components = 0.00528056 Jy ! Clean residual min=-0.002520 max=0.002408 Jy/beam ! Clean residual mean=0.000006 rms=0.000656 Jy/beam ! Combined flux in latest and established models = 0.171276 Jy ! Adding 27 model components to the UV plane model. ! The established model now contains 107 components and 0.171276 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.901 mas, bmaj=21.76 mas, bpa=-6.842 degrees ! Estimated noise=1204.05 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00191634 Jy ! Component: 100 - total flux cleaned = 0.00207718 Jy ! Component: 150 - total flux cleaned = 0.00227571 Jy ! Component: 200 - total flux cleaned = 0.00241132 Jy ! Total flux subtracted in 200 components = 0.00241132 Jy ! Clean residual min=-0.002308 max=0.002182 Jy/beam ! Clean residual mean=0.000016 rms=0.000682 Jy/beam ! Combined flux in latest and established models = 0.173687 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000167198 Jy ! Component: 100 - total flux cleaned = 0.000285568 Jy ! Component: 150 - total flux cleaned = 0.000433319 Jy ! Component: 200 - total flux cleaned = 0.000605066 Jy ! Total flux subtracted in 200 components = 0.000605066 Jy ! Clean residual min=-0.002126 max=0.002058 Jy/beam ! Clean residual mean=0.000017 rms=0.000649 Jy/beam ! Combined flux in latest and established models = 0.174292 Jy ! Adding 60 model components to the UV plane model. ! The established model now contains 161 components and 0.174292 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.08 mas, bmaj=15.1 mas, bpa=-19.37 degrees ! Estimated noise=991.065 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00071498 Jy ! Component: 100 - total flux cleaned = 0.00100281 Jy ! Component: 150 - total flux cleaned = 0.00117642 Jy ! Component: 200 - total flux cleaned = 0.00121677 Jy ! Total flux subtracted in 200 components = 0.00121677 Jy ! Clean residual min=-0.002353 max=0.002213 Jy/beam ! Clean residual mean=0.000010 rms=0.000562 Jy/beam ! Combined flux in latest and established models = 0.175509 Jy selfcal ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 192 components and 0.175509 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097964Jy sigma=0.000668 ! Fit after self-cal, rms=0.097892Jy sigma=0.000668 wmodel J0526-2342_S_2017_10_09_pus_map.mod ! Writing 192 model components to file: J0526-2342_S_2017_10_09_pus_map.mod wobs J0526-2342_S_2017_10_09_pus_uvs.fits ! Writing UV FITS file: J0526-2342_S_2017_10_09_pus_uvs.fits wwins J0526-2342_S_2017_10_09_pus_map.win ! wwins: Wrote 3 windows to J0526-2342_S_2017_10_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000364298 Jy ! Component: 100 - total flux cleaned = -0.000609469 Jy ! Component: 150 - total flux cleaned = -0.000872002 Jy ! Component: 200 - total flux cleaned = -0.00108976 Jy ! Component: 250 - total flux cleaned = -0.00132768 Jy ! Component: 300 - total flux cleaned = -0.0014134 Jy ! Component: 350 - total flux cleaned = -0.00152534 Jy ! Component: 400 - total flux cleaned = -0.00160641 Jy ! Component: 450 - total flux cleaned = -0.00163226 Jy ! Component: 500 - total flux cleaned = -0.00158136 Jy ! Component: 550 - total flux cleaned = -0.0016312 Jy ! Component: 600 - total flux cleaned = -0.00158258 Jy ! Component: 650 - total flux cleaned = -0.0016067 Jy ! Component: 700 - total flux cleaned = -0.00153672 Jy ! Component: 750 - total flux cleaned = -0.00151339 Jy ! Component: 800 - total flux cleaned = -0.00144626 Jy ! Component: 850 - total flux cleaned = -0.00135873 Jy ! Component: 900 - total flux cleaned = -0.00129491 Jy ! Component: 950 - total flux cleaned = -0.0012739 Jy ! Component: 1000 - total flux cleaned = -0.00127392 Jy ! Component: 1050 - total flux cleaned = -0.00121312 Jy ! Component: 1100 - total flux cleaned = -0.00129322 Jy ! Component: 1150 - total flux cleaned = -0.00129359 Jy ! Component: 1200 - total flux cleaned = -0.00135208 Jy ! Component: 1250 - total flux cleaned = -0.00135197 Jy ! Component: 1300 - total flux cleaned = -0.0013147 Jy ! Component: 1350 - total flux cleaned = -0.00136989 Jy ! Component: 1400 - total flux cleaned = -0.00136969 Jy ! Component: 1450 - total flux cleaned = -0.00133409 Jy ! Component: 1500 - total flux cleaned = -0.00136913 Jy ! Component: 1550 - total flux cleaned = -0.00136904 Jy ! Component: 1600 - total flux cleaned = -0.00133484 Jy ! Component: 1650 - total flux cleaned = -0.00126788 Jy ! Component: 1700 - total flux cleaned = -0.00125168 Jy ! Component: 1750 - total flux cleaned = -0.00120288 Jy ! Component: 1800 - total flux cleaned = -0.00117102 Jy ! Component: 1850 - total flux cleaned = -0.00112344 Jy ! Component: 1900 - total flux cleaned = -0.0011079 Jy ! Component: 1950 - total flux cleaned = -0.00106119 Jy ! Component: 2000 - total flux cleaned = -0.000999991 Jy ! Component: 2050 - total flux cleaned = -0.00100024 Jy ! Component: 2100 - total flux cleaned = -0.000970146 Jy ! Component: 2150 - total flux cleaned = -0.000955471 Jy ! Component: 2200 - total flux cleaned = -0.000882236 Jy ! Component: 2250 - total flux cleaned = -0.000867709 Jy ! Component: 2300 - total flux cleaned = -0.000839062 Jy ! Component: 2350 - total flux cleaned = -0.00079658 Jy ! Component: 2400 - total flux cleaned = -0.000754522 Jy ! Component: 2450 - total flux cleaned = -0.000713055 Jy ! Component: 2500 - total flux cleaned = -0.000699327 Jy ! Component: 2550 - total flux cleaned = -0.000658453 Jy ! Component: 2600 - total flux cleaned = -0.000618045 Jy ! Component: 2650 - total flux cleaned = -0.000525091 Jy ! Component: 2700 - total flux cleaned = -0.000525288 Jy ! Component: 2750 - total flux cleaned = -0.000538269 Jy ! Component: 2800 - total flux cleaned = -0.000525422 Jy ! Component: 2850 - total flux cleaned = -0.00051243 Jy ! Component: 2900 - total flux cleaned = -0.000499943 Jy ! Component: 2950 - total flux cleaned = -0.000512465 Jy ! Component: 3000 - total flux cleaned = -0.000512306 Jy ! Component: 3050 - total flux cleaned = -0.000500048 Jy ! Component: 3100 - total flux cleaned = -0.000512309 Jy ! Component: 3150 - total flux cleaned = -0.000548519 Jy ! Component: 3200 - total flux cleaned = -0.000524495 Jy ! Component: 3250 - total flux cleaned = -0.00054824 Jy ! Component: 3300 - total flux cleaned = -0.000548291 Jy ! Component: 3350 - total flux cleaned = -0.000595122 Jy ! Component: 3400 - total flux cleaned = -0.000629797 Jy ! Component: 3450 - total flux cleaned = -0.000606804 Jy ! Component: 3500 - total flux cleaned = -0.000595506 Jy ! Component: 3550 - total flux cleaned = -0.000618307 Jy ! Component: 3600 - total flux cleaned = -0.000663294 Jy ! Component: 3650 - total flux cleaned = -0.000663183 Jy ! Component: 3700 - total flux cleaned = -0.00070738 Jy ! Component: 3750 - total flux cleaned = -0.000718289 Jy ! Component: 3800 - total flux cleaned = -0.000718289 Jy ! Component: 3850 - total flux cleaned = -0.00071834 Jy ! Component: 3900 - total flux cleaned = -0.000772062 Jy ! Component: 3950 - total flux cleaned = -0.000804152 Jy ! Component: 4000 - total flux cleaned = -0.000804028 Jy ! Component: 4050 - total flux cleaned = -0.00081463 Jy ! Total flux subtracted in 4096 components = -0.000814708 Jy ! Clean residual min=-0.000590 max=0.000592 Jy/beam ! Clean residual mean=-0.000001 rms=0.000199 Jy/beam ! Combined flux in latest and established models = 0.174694 Jy keep ! Adding 272 model components to the UV plane model. ! The established model now contains 464 components and 0.174694 Jy ![Exited script file: muppet] wmap "J0526-2342_S_2017_10_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.08 x 15.1 at -19.37 degrees (North through East) ! Clean map min=-0.0023231 max=0.13485 Jy/beam ! Writing clean map to FITS file: J0526-2342_S_2017_10_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.134853 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000198704 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.442047 0.442047 0.884093 1.76819 3.53637 7.07274 14.1455 28.291 56.582 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.134 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.08 x 15.1 at -19.37 degrees (North through East) ! Clean map min=-0.0023231 max=0.13485 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0526-2342_S_2017_10_09_pus_uvs.log closed on Sun May 12 13:05:11 2019