! Started logfile: J0524-3126_S_2017_10_21_pus_uvs.log on Sat May 11 20:51:29 2019 obs J0524-3126_S_2017_10_21_pus_uva.fits ! Reading UV FITS file: J0524-3126_S_2017_10_21_pus_uva.fits ! AN table 1: 145 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.857088 visibilities/baseline/integration-bin. ! Found source: J0524-3126 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 644 lines of history. ! ! Reading 17896 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0524-3126_S_2017_10_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 184 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 300 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 227 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 767 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.989312Jy sigma=0.007411 ! Fit after self-cal, rms=0.941358Jy sigma=0.007073 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.798 mas, bmaj=11.23 mas, bpa=-19.43 degrees ! Estimated noise=1396.52 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0462383 Jy ! Component: 100 - total flux cleaned = 0.0583917 Jy ! Total flux subtracted in 100 components = 0.0583917 Jy ! Clean residual min=-0.005842 max=0.005907 Jy/beam ! Clean residual mean=-0.000035 rms=0.001596 Jy/beam ! Combined flux in latest and established models = 0.0583917 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.0583917 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104100Jy sigma=0.000706 ! Fit after self-cal, rms=0.103136Jy sigma=0.000700 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.513 mas, bmaj=13.38 mas, bpa=-19.29 degrees ! Estimated noise=918.065 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0103451 Jy ! Component: 100 - total flux cleaned = 0.0150154 Jy ! Component: 150 - total flux cleaned = 0.01736 Jy ! Component: 200 - total flux cleaned = 0.0185878 Jy ! Total flux subtracted in 200 components = 0.0185878 Jy ! Clean residual min=-0.004638 max=0.006111 Jy/beam ! Clean residual mean=-0.000060 rms=0.001445 Jy/beam ! Combined flux in latest and established models = 0.0769795 Jy ! Performing phase self-cal ! Adding 50 model components to the UV plane model. ! The established model now contains 61 components and 0.0769795 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102167Jy sigma=0.000693 ! Fit after self-cal, rms=0.102118Jy sigma=0.000692 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.89 FD 0.98 HN 1.02 KP 1.21 ! LA 1.09 MK 1.12 NL 0.84 OV 1.18 ! PT 0.85 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.03 HN 1.01 KP 1.05 ! LA 1.06 MK 1.08 NL 1.10 OV 1.16 ! PT 0.75 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.10 HN 0.89 KP 1.17 ! LA 0.85 MK 1.11 NL 1.11 OV 1.09 ! PT 0.79 ! ! ! Correcting IF 4. ! A total of 78 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.94 HN 0.86 KP 1.00* ! LA 0.87 MK 0.86 NL 1.00* OV 1.00* ! PT 0.75 ! ! ! Fit before self-cal, rms=0.102118Jy sigma=0.000692 ! Fit after self-cal, rms=0.101371Jy sigma=0.000685 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.553 mas, bmaj=13.4 mas, bpa=-19.26 degrees ! Estimated noise=929.378 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000405065 Jy ! Component: 100 - total flux cleaned = 0.000493321 Jy ! Component: 150 - total flux cleaned = 0.000520054 Jy ! Component: 200 - total flux cleaned = 0.000521143 Jy ! Total flux subtracted in 200 components = 0.000521143 Jy ! Clean residual min=-0.002638 max=0.003259 Jy/beam ! Clean residual mean=-0.000017 rms=0.000810 Jy/beam ! Combined flux in latest and established models = 0.0775006 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 72 components and 0.0775006 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101354Jy sigma=0.000685 ! Fit after self-cal, rms=0.101935Jy sigma=0.000683 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101935Jy sigma=0.000683 ! Fit after self-cal, rms=0.105082Jy sigma=0.000681 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.575 mas, bmaj=13.42 mas, bpa=-19.32 degrees ! Estimated noise=936.891 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000657839 Jy ! Component: 100 - total flux cleaned = 0.000687374 Jy ! Component: 150 - total flux cleaned = 0.000713954 Jy ! Component: 200 - total flux cleaned = 0.00073853 Jy ! Total flux subtracted in 200 components = 0.00073853 Jy ! Clean residual min=-0.002622 max=0.002622 Jy/beam ! Clean residual mean=-0.000001 rms=0.000717 Jy/beam ! Combined flux in latest and established models = 0.0782392 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 77 components and 0.0782392 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105062Jy sigma=0.000681 ! Fit after self-cal, rms=0.105676Jy sigma=0.000680 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.93383e-05 Jy ! Component: 100 - total flux cleaned = 5.71138e-05 Jy ! Component: 150 - total flux cleaned = 0.00013308 Jy ! Component: 200 - total flux cleaned = 0.000178755 Jy ! Total flux subtracted in 200 components = 0.000178755 Jy ! Clean residual min=-0.002688 max=0.002587 Jy/beam ! Clean residual mean=-0.000009 rms=0.000732 Jy/beam ! Combined flux in latest and established models = 0.0784179 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 83 components and 0.0784179 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105657Jy sigma=0.000680 ! Fit after self-cal, rms=0.105674Jy sigma=0.000680 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105674Jy sigma=0.000680 ! Fit after self-cal, rms=0.107357Jy sigma=0.000680 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.566 mas, bmaj=13.37 mas, bpa=-19.36 degrees ! Estimated noise=937.246 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000619442 Jy ! Component: 100 - total flux cleaned = 0.000700517 Jy ! Component: 150 - total flux cleaned = 0.000773947 Jy ! Component: 200 - total flux cleaned = 0.000819244 Jy ! Total flux subtracted in 200 components = 0.000819244 Jy ! Clean residual min=-0.002538 max=0.002602 Jy/beam ! Clean residual mean=0.000002 rms=0.000697 Jy/beam ! Combined flux in latest and established models = 0.0792372 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 90 components and 0.0792372 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107338Jy sigma=0.000680 ! Fit after self-cal, rms=0.107686Jy sigma=0.000680 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000125173 Jy ! Component: 100 - total flux cleaned = -4.87032e-05 Jy ! Component: 150 - total flux cleaned = 2.05708e-05 Jy ! Component: 200 - total flux cleaned = 8.49767e-05 Jy ! Total flux subtracted in 200 components = 8.49767e-05 Jy ! Clean residual min=-0.002649 max=0.002662 Jy/beam ! Clean residual mean=-0.000001 rms=0.000703 Jy/beam ! Combined flux in latest and established models = 0.0793221 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 92 components and 0.0793222 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107670Jy sigma=0.000680 ! Fit after self-cal, rms=0.107678Jy sigma=0.000680 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107678Jy sigma=0.000680 ! Fit after self-cal, rms=0.108319Jy sigma=0.000679 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.332 mas, bmaj=26.36 mas, bpa=-4.205 degrees ! Estimated noise=1087.45 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000922941 Jy ! Component: 100 - total flux cleaned = 0.000968516 Jy ! Component: 150 - total flux cleaned = 0.00100766 Jy ! Component: 200 - total flux cleaned = 0.00102614 Jy ! Total flux subtracted in 200 components = 0.00102614 Jy ! Clean residual min=-0.002385 max=0.002667 Jy/beam ! Clean residual mean=0.000005 rms=0.000818 Jy/beam ! Combined flux in latest and established models = 0.0803483 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 101 components and 0.0803483 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108307Jy sigma=0.000679 ! Fit after self-cal, rms=0.108500Jy sigma=0.000679 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.01178e-05 Jy ! Component: 100 - total flux cleaned = -4.67253e-05 Jy ! Component: 150 - total flux cleaned = -1.46931e-05 Jy ! Component: 200 - total flux cleaned = 2.96845e-05 Jy ! Total flux subtracted in 200 components = 2.96845e-05 Jy ! Clean residual min=-0.002316 max=0.002712 Jy/beam ! Clean residual mean=0.000004 rms=0.000802 Jy/beam ! Combined flux in latest and established models = 0.080378 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 104 components and 0.080378 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108494Jy sigma=0.000679 ! Fit after self-cal, rms=0.108506Jy sigma=0.000679 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.549 mas, bmaj=13.32 mas, bpa=-19.41 degrees ! Estimated noise=935.307 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.549 x 13.32 at -19.41 degrees (North through East) ! Clean map min=-0.0025141 max=0.050439 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.807 mas, bmaj=11.15 mas, bpa=-19.68 degrees ! Estimated noise=1435.42 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0458771 Jy ! Component: 100 - total flux cleaned = 0.0595034 Jy ! Component: 150 - total flux cleaned = 0.0675011 Jy ! Component: 200 - total flux cleaned = 0.0726262 Jy ! Total flux subtracted in 200 components = 0.0726262 Jy ! Clean residual min=-0.004322 max=0.004418 Jy/beam ! Clean residual mean=-0.000007 rms=0.001173 Jy/beam ! Combined flux in latest and established models = 0.0726262 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 32 model components to the UV plane model. ! The established model now contains 32 components and 0.0726262 Jy ! Inverting map and beam ! Estimated beam: bmin=3.549 mas, bmaj=13.32 mas, bpa=-19.41 degrees ! Estimated noise=935.307 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (2, 11.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00482064 Jy ! Component: 100 - total flux cleaned = 0.00730277 Jy ! Component: 150 - total flux cleaned = 0.00813029 Jy ! Component: 200 - total flux cleaned = 0.00858378 Jy ! Total flux subtracted in 200 components = 0.00858378 Jy ! Clean residual min=-0.002810 max=0.002696 Jy/beam ! Clean residual mean=0.000005 rms=0.000686 Jy/beam ! Combined flux in latest and established models = 0.08121 Jy ! Adding 24 model components to the UV plane model. ! The established model now contains 53 components and 0.08121 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.332 mas, bmaj=26.36 mas, bpa=-4.205 degrees ! Estimated noise=1087.45 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000578868 Jy ! Component: 100 - total flux cleaned = 0.000549573 Jy ! Component: 150 - total flux cleaned = 0.00049619 Jy ! Component: 200 - total flux cleaned = 0.000472808 Jy ! Total flux subtracted in 200 components = 0.000472808 Jy ! Clean residual min=-0.002282 max=0.002545 Jy/beam ! Clean residual mean=0.000011 rms=0.000768 Jy/beam ! Combined flux in latest and established models = 0.0816828 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.23716e-05 Jy ! Component: 100 - total flux cleaned = -6.39192e-05 Jy ! Component: 150 - total flux cleaned = -8.29523e-05 Jy ! Component: 200 - total flux cleaned = -0.000101164 Jy ! Total flux subtracted in 200 components = -0.000101164 Jy ! Clean residual min=-0.002261 max=0.002492 Jy/beam ! Clean residual mean=0.000010 rms=0.000760 Jy/beam ! Combined flux in latest and established models = 0.0815817 Jy ! Adding 19 model components to the UV plane model. ! The established model now contains 71 components and 0.0815817 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.549 mas, bmaj=13.32 mas, bpa=-19.41 degrees ! Estimated noise=935.307 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.32041e-05 Jy ! Component: 100 - total flux cleaned = -3.2829e-05 Jy ! Component: 150 - total flux cleaned = -3.335e-05 Jy ! Component: 200 - total flux cleaned = -6.15786e-05 Jy ! Total flux subtracted in 200 components = -6.15786e-05 Jy ! Clean residual min=-0.002650 max=0.002574 Jy/beam ! Clean residual mean=0.000005 rms=0.000660 Jy/beam ! Combined flux in latest and established models = 0.0815201 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 79 components and 0.0815201 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108424Jy sigma=0.000679 ! Fit after self-cal, rms=0.108468Jy sigma=0.000679 wmodel J0524-3126_S_2017_10_21_pus_map.mod ! Writing 79 model components to file: J0524-3126_S_2017_10_21_pus_map.mod wobs J0524-3126_S_2017_10_21_pus_uvs.fits ! Writing UV FITS file: J0524-3126_S_2017_10_21_pus_uvs.fits wwins J0524-3126_S_2017_10_21_pus_map.win ! wwins: Wrote 2 windows to J0524-3126_S_2017_10_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000342941 Jy ! Component: 100 - total flux cleaned = -0.000556388 Jy ! Component: 150 - total flux cleaned = -0.000871744 Jy ! Component: 200 - total flux cleaned = -0.00120328 Jy ! Component: 250 - total flux cleaned = -0.00155208 Jy ! Component: 300 - total flux cleaned = -0.00188631 Jy ! Component: 350 - total flux cleaned = -0.00207954 Jy ! Component: 400 - total flux cleaned = -0.00226483 Jy ! Component: 450 - total flux cleaned = -0.00238445 Jy ! Component: 500 - total flux cleaned = -0.0024719 Jy ! Component: 550 - total flux cleaned = -0.00261233 Jy ! Component: 600 - total flux cleaned = -0.00261195 Jy ! Component: 650 - total flux cleaned = -0.00266506 Jy ! Component: 700 - total flux cleaned = -0.00266489 Jy ! Component: 750 - total flux cleaned = -0.00269075 Jy ! Component: 800 - total flux cleaned = -0.0028149 Jy ! Component: 850 - total flux cleaned = -0.00281491 Jy ! Component: 900 - total flux cleaned = -0.00283884 Jy ! Component: 950 - total flux cleaned = -0.00290885 Jy ! Component: 1000 - total flux cleaned = -0.00290924 Jy ! Component: 1050 - total flux cleaned = -0.00295387 Jy ! Component: 1100 - total flux cleaned = -0.00299788 Jy ! Component: 1150 - total flux cleaned = -0.00299831 Jy ! Component: 1200 - total flux cleaned = -0.00306177 Jy ! Component: 1250 - total flux cleaned = -0.00312415 Jy ! Component: 1300 - total flux cleaned = -0.00310376 Jy ! Component: 1350 - total flux cleaned = -0.00312382 Jy ! Component: 1400 - total flux cleaned = -0.00312369 Jy ! Component: 1450 - total flux cleaned = -0.00314267 Jy ! Component: 1500 - total flux cleaned = -0.00310414 Jy ! Component: 1550 - total flux cleaned = -0.00302894 Jy ! Component: 1600 - total flux cleaned = -0.00295505 Jy ! Component: 1650 - total flux cleaned = -0.0029368 Jy ! Component: 1700 - total flux cleaned = -0.00286517 Jy ! Component: 1750 - total flux cleaned = -0.00284767 Jy ! Component: 1800 - total flux cleaned = -0.00283052 Jy ! Component: 1850 - total flux cleaned = -0.00283039 Jy ! Component: 1900 - total flux cleaned = -0.00277973 Jy ! Component: 1950 - total flux cleaned = -0.00279645 Jy ! Component: 2000 - total flux cleaned = -0.0027799 Jy ! Component: 2050 - total flux cleaned = -0.00277963 Jy ! Component: 2100 - total flux cleaned = -0.00271494 Jy ! Component: 2150 - total flux cleaned = -0.00273128 Jy ! Component: 2200 - total flux cleaned = -0.00269971 Jy ! Component: 2250 - total flux cleaned = -0.00268428 Jy ! Component: 2300 - total flux cleaned = -0.00266916 Jy ! Component: 2350 - total flux cleaned = -0.00266924 Jy ! Component: 2400 - total flux cleaned = -0.00263918 Jy ! Component: 2450 - total flux cleaned = -0.00265424 Jy ! Component: 2500 - total flux cleaned = -0.00268336 Jy ! Component: 2550 - total flux cleaned = -0.00266851 Jy ! Component: 2600 - total flux cleaned = -0.00266852 Jy ! Component: 2650 - total flux cleaned = -0.00272567 Jy ! Component: 2700 - total flux cleaned = -0.00276814 Jy ! Component: 2750 - total flux cleaned = -0.00281019 Jy ! Component: 2800 - total flux cleaned = -0.00285173 Jy ! Component: 2850 - total flux cleaned = -0.00286536 Jy ! Component: 2900 - total flux cleaned = -0.00291992 Jy ! Component: 2950 - total flux cleaned = -0.00297402 Jy ! Component: 3000 - total flux cleaned = -0.00302759 Jy ! Component: 3050 - total flux cleaned = -0.00306752 Jy ! Component: 3100 - total flux cleaned = -0.00312038 Jy ! Component: 3150 - total flux cleaned = -0.0031989 Jy ! Component: 3200 - total flux cleaned = -0.00323785 Jy ! Component: 3250 - total flux cleaned = -0.00328952 Jy ! Component: 3300 - total flux cleaned = -0.00332797 Jy ! Component: 3350 - total flux cleaned = -0.00337874 Jy ! Component: 3400 - total flux cleaned = -0.00345451 Jy ! Component: 3450 - total flux cleaned = -0.00347954 Jy ! Component: 3500 - total flux cleaned = -0.0035294 Jy ! Component: 3550 - total flux cleaned = -0.00360339 Jy ! Component: 3600 - total flux cleaned = -0.00360336 Jy ! Component: 3650 - total flux cleaned = -0.0036764 Jy ! Component: 3700 - total flux cleaned = -0.00368847 Jy ! Component: 3750 - total flux cleaned = -0.0037365 Jy ! Component: 3800 - total flux cleaned = -0.00373652 Jy ! Component: 3850 - total flux cleaned = -0.00380771 Jy ! Component: 3900 - total flux cleaned = -0.0038664 Jy ! Component: 3950 - total flux cleaned = -0.00391307 Jy ! Component: 4000 - total flux cleaned = -0.0039364 Jy ! Component: 4050 - total flux cleaned = -0.00399397 Jy ! Total flux subtracted in 4096 components = -0.00401675 Jy ! Clean residual min=-0.000660 max=0.000602 Jy/beam ! Clean residual mean=-0.000001 rms=0.000215 Jy/beam ! Combined flux in latest and established models = 0.0775033 Jy keep ! Adding 245 model components to the UV plane model. ! The established model now contains 324 components and 0.0775034 Jy ![Exited script file: muppet] wmap "J0524-3126_S_2017_10_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.549 x 13.32 at -19.41 degrees (North through East) ! Clean map min=-0.00163 max=0.049214 Jy/beam ! Writing clean map to FITS file: J0524-3126_S_2017_10_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0492136 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000214108 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.30518 1.30518 2.61036 5.22072 10.4414 20.8829 41.7658 83.5315 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.049 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.549 x 13.32 at -19.41 degrees (North through East) ! Clean map min=-0.00163 max=0.049214 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0524-3126_S_2017_10_21_pus_uvs.log closed on Sat May 11 20:51:34 2019