! Started logfile: J0524-3126_S_2017_10_09_pus_uvs.log on Sun May 12 13:05:01 2019 obs J0524-3126_S_2017_10_09_pus_uva.fits ! Reading UV FITS file: J0524-3126_S_2017_10_09_pus_uva.fits ! AN table 1: 73 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.501142 visibilities/baseline/integration-bin. ! Found source: J0524-3126 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 496 lines of history. ! ! Reading 5268 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0524-3126_S_2017_10_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 207 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 250 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 251 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 444 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.980829Jy sigma=0.006984 ! Fit after self-cal, rms=0.935022Jy sigma=0.006682 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.533 mas, bmaj=22.88 mas, bpa=-12.47 degrees ! Estimated noise=2305.03 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0473736 Jy ! Component: 100 - total flux cleaned = 0.0597857 Jy ! Total flux subtracted in 100 components = 0.0597857 Jy ! Clean residual min=-0.006751 max=0.006597 Jy/beam ! Clean residual mean=-0.000065 rms=0.002023 Jy/beam ! Combined flux in latest and established models = 0.0597857 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.0597857 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094673Jy sigma=0.000610 ! Fit after self-cal, rms=0.093833Jy sigma=0.000605 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.113 mas, bmaj=31.13 mas, bpa=-12.72 degrees ! Estimated noise=1766.44 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0124139 Jy ! Component: 100 - total flux cleaned = 0.0181487 Jy ! Component: 150 - total flux cleaned = 0.0210832 Jy ! Component: 200 - total flux cleaned = 0.0227107 Jy ! Total flux subtracted in 200 components = 0.0227107 Jy ! Clean residual min=-0.004196 max=0.007183 Jy/beam ! Clean residual mean=-0.000023 rms=0.001430 Jy/beam ! Combined flux in latest and established models = 0.0824964 Jy ! Performing phase self-cal ! Adding 52 model components to the UV plane model. ! The established model now contains 57 components and 0.0824964 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092213Jy sigma=0.000595 ! Fit after self-cal, rms=0.091883Jy sigma=0.000593 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.14 FD 0.94 HN 1.00* KP 1.07 ! LA 1.07 MK 1.16 NL 0.87 OV 1.00* ! PT 1.05 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.94 HN 1.00* KP 1.01 ! LA 1.04 MK 1.05 NL 1.03 OV 1.00* ! PT 0.96 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.02 HN 1.00* KP 0.92 ! LA 0.81 MK 1.13 NL 1.15 OV 1.00* ! PT 0.92 ! ! ! Correcting IF 4. ! A total of 213 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* ! ! ! Fit before self-cal, rms=0.091883Jy sigma=0.000593 ! Fit after self-cal, rms=0.093490Jy sigma=0.000596 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.353 mas, bmaj=31.42 mas, bpa=-12.66 degrees ! Estimated noise=1895.86 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-11, -104). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00447201 Jy ! Component: 100 - total flux cleaned = 0.0044335 Jy ! Component: 150 - total flux cleaned = 0.00483746 Jy ! Component: 200 - total flux cleaned = 0.00498238 Jy ! Total flux subtracted in 200 components = 0.00498238 Jy ! Clean residual min=-0.003393 max=0.003350 Jy/beam ! Clean residual mean=0.000032 rms=0.000858 Jy/beam ! Combined flux in latest and established models = 0.0874787 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 85 components and 0.0874787 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093072Jy sigma=0.000593 ! Fit after self-cal, rms=0.092879Jy sigma=0.000592 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092879Jy sigma=0.000592 ! Fit after self-cal, rms=0.091555Jy sigma=0.000592 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.356 mas, bmaj=31.16 mas, bpa=-12.67 degrees ! Estimated noise=1871.94 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00293819 Jy ! Component: 100 - total flux cleaned = 0.00363869 Jy ! Component: 150 - total flux cleaned = 0.00396459 Jy ! Component: 200 - total flux cleaned = 0.0041383 Jy ! Total flux subtracted in 200 components = 0.0041383 Jy ! Clean residual min=-0.002846 max=0.002767 Jy/beam ! Clean residual mean=0.000035 rms=0.000750 Jy/beam ! Combined flux in latest and established models = 0.091617 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 99 components and 0.091617 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091379Jy sigma=0.000591 ! Fit after self-cal, rms=0.091309Jy sigma=0.000591 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00165668 Jy ! Component: 100 - total flux cleaned = 0.00197063 Jy ! Component: 150 - total flux cleaned = 0.00213991 Jy ! Component: 200 - total flux cleaned = 0.00213997 Jy ! Total flux subtracted in 200 components = 0.00213997 Jy ! Clean residual min=-0.002723 max=0.002814 Jy/beam ! Clean residual mean=0.000045 rms=0.000740 Jy/beam ! Combined flux in latest and established models = 0.093757 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 109 components and 0.093757 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091209Jy sigma=0.000590 ! Fit after self-cal, rms=0.091123Jy sigma=0.000590 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091123Jy sigma=0.000590 ! Fit after self-cal, rms=0.090457Jy sigma=0.000590 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.353 mas, bmaj=31.06 mas, bpa=-12.68 degrees ! Estimated noise=1858.12 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00147361 Jy ! Component: 100 - total flux cleaned = 0.00177167 Jy ! Component: 150 - total flux cleaned = 0.00181473 Jy ! Component: 200 - total flux cleaned = 0.00189488 Jy ! Total flux subtracted in 200 components = 0.00189488 Jy ! Clean residual min=-0.002551 max=0.002552 Jy/beam ! Clean residual mean=0.000044 rms=0.000699 Jy/beam ! Combined flux in latest and established models = 0.0956519 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 129 components and 0.0956519 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090395Jy sigma=0.000589 ! Fit after self-cal, rms=0.090395Jy sigma=0.000589 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000720789 Jy ! Component: 100 - total flux cleaned = 0.00093149 Jy ! Component: 150 - total flux cleaned = 0.000969675 Jy ! Component: 200 - total flux cleaned = 0.00100639 Jy ! Total flux subtracted in 200 components = 0.00100639 Jy ! Clean residual min=-0.002491 max=0.002671 Jy/beam ! Clean residual mean=0.000052 rms=0.000709 Jy/beam ! Combined flux in latest and established models = 0.0966583 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 141 components and 0.0966583 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090352Jy sigma=0.000589 ! Fit after self-cal, rms=0.090283Jy sigma=0.000589 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090283Jy sigma=0.000589 ! Fit after self-cal, rms=0.090226Jy sigma=0.000589 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=11.6 mas, bmaj=37.15 mas, bpa=0.1095 degrees ! Estimated noise=2256.5 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000734001 Jy ! Component: 100 - total flux cleaned = 0.000955161 Jy ! Component: 150 - total flux cleaned = 0.00102248 Jy ! Component: 200 - total flux cleaned = 0.000991815 Jy ! Total flux subtracted in 200 components = 0.000991815 Jy ! Clean residual min=-0.002346 max=0.002771 Jy/beam ! Clean residual mean=0.000072 rms=0.000841 Jy/beam ! Combined flux in latest and established models = 0.0976501 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 161 components and 0.0976501 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090190Jy sigma=0.000589 ! Fit after self-cal, rms=0.090192Jy sigma=0.000589 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000201891 Jy ! Component: 100 - total flux cleaned = 0.000232468 Jy ! Component: 150 - total flux cleaned = 0.000233187 Jy ! Component: 200 - total flux cleaned = 0.000234587 Jy ! Total flux subtracted in 200 components = 0.000234587 Jy ! Clean residual min=-0.002370 max=0.002742 Jy/beam ! Clean residual mean=0.000077 rms=0.000854 Jy/beam ! Combined flux in latest and established models = 0.0978846 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 171 components and 0.0978846 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090167Jy sigma=0.000589 ! Fit after self-cal, rms=0.090163Jy sigma=0.000589 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.348 mas, bmaj=31.12 mas, bpa=-12.7 degrees ! Estimated noise=1854.63 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.348 x 31.12 at -12.7 degrees (North through East) ! Clean map min=-0.0044675 max=0.065994 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.655 mas, bmaj=22.54 mas, bpa=-12.53 degrees ! Estimated noise=2491.18 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0488659 Jy ! Component: 100 - total flux cleaned = 0.060003 Jy ! Component: 150 - total flux cleaned = 0.0665222 Jy ! Component: 200 - total flux cleaned = 0.0712687 Jy ! Total flux subtracted in 200 components = 0.0712687 Jy ! Clean residual min=-0.006350 max=0.006472 Jy/beam ! Clean residual mean=-0.000033 rms=0.001998 Jy/beam ! Combined flux in latest and established models = 0.0712687 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 30 model components to the UV plane model. ! The established model now contains 30 components and 0.0712687 Jy ! Inverting map and beam ! Estimated beam: bmin=3.348 mas, bmaj=31.12 mas, bpa=-12.7 degrees ! Estimated noise=1854.63 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00797265 Jy ! Component: 100 - total flux cleaned = 0.0128719 Jy ! Component: 150 - total flux cleaned = 0.0165545 Jy ! Component: 200 - total flux cleaned = 0.0194607 Jy ! Total flux subtracted in 200 components = 0.0194607 Jy ! Clean residual min=-0.003282 max=0.003387 Jy/beam ! Clean residual mean=0.000004 rms=0.000949 Jy/beam ! Combined flux in latest and established models = 0.0907294 Jy ! Adding 56 model components to the UV plane model. ! The established model now contains 85 components and 0.0907294 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=11.6 mas, bmaj=37.15 mas, bpa=0.1095 degrees ! Estimated noise=2256.5 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00239143 Jy ! Component: 100 - total flux cleaned = 0.00327396 Jy ! Component: 150 - total flux cleaned = 0.00404482 Jy ! Component: 200 - total flux cleaned = 0.00465884 Jy ! Total flux subtracted in 200 components = 0.00465884 Jy ! Clean residual min=-0.002771 max=0.002588 Jy/beam ! Clean residual mean=0.000052 rms=0.000940 Jy/beam ! Combined flux in latest and established models = 0.0953883 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000493434 Jy ! Component: 100 - total flux cleaned = 0.000942217 Jy ! Component: 150 - total flux cleaned = 0.00134905 Jy ! Component: 200 - total flux cleaned = 0.00149082 Jy ! Total flux subtracted in 200 components = 0.00149082 Jy ! Clean residual min=-0.002465 max=0.002674 Jy/beam ! Clean residual mean=0.000064 rms=0.000873 Jy/beam ! Combined flux in latest and established models = 0.0968791 Jy ! Adding 73 model components to the UV plane model. ! The established model now contains 153 components and 0.0968791 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.348 mas, bmaj=31.12 mas, bpa=-12.7 degrees ! Estimated noise=1854.63 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000595428 Jy ! Component: 100 - total flux cleaned = 0.000652781 Jy ! Component: 150 - total flux cleaned = 0.000545598 Jy ! Component: 200 - total flux cleaned = 0.000454309 Jy ! Total flux subtracted in 200 components = 0.000454309 Jy ! Clean residual min=-0.002588 max=0.002475 Jy/beam ! Clean residual mean=0.000047 rms=0.000703 Jy/beam ! Combined flux in latest and established models = 0.0973334 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 178 components and 0.0973334 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090165Jy sigma=0.000589 ! Fit after self-cal, rms=0.090106Jy sigma=0.000588 wmodel J0524-3126_S_2017_10_09_pus_map.mod ! Writing 178 model components to file: J0524-3126_S_2017_10_09_pus_map.mod wobs J0524-3126_S_2017_10_09_pus_uvs.fits ! Writing UV FITS file: J0524-3126_S_2017_10_09_pus_uvs.fits wwins J0524-3126_S_2017_10_09_pus_map.win ! wwins: Wrote 2 windows to J0524-3126_S_2017_10_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00013228 Jy ! Component: 100 - total flux cleaned = -0.000329366 Jy ! Component: 150 - total flux cleaned = -0.00026109 Jy ! Component: 200 - total flux cleaned = -0.000136086 Jy ! Component: 250 - total flux cleaned = 0.000157927 Jy ! Component: 300 - total flux cleaned = 0.000464281 Jy ! Component: 350 - total flux cleaned = 0.000649168 Jy ! Component: 400 - total flux cleaned = 0.000825998 Jy ! Component: 450 - total flux cleaned = 0.000994051 Jy ! Component: 500 - total flux cleaned = 0.00103995 Jy ! Component: 550 - total flux cleaned = 0.00117237 Jy ! Component: 600 - total flux cleaned = 0.00123537 Jy ! Component: 650 - total flux cleaned = 0.00131748 Jy ! Component: 700 - total flux cleaned = 0.00131813 Jy ! Component: 750 - total flux cleaned = 0.00129922 Jy ! Component: 800 - total flux cleaned = 0.00122377 Jy ! Component: 850 - total flux cleaned = 0.00120523 Jy ! Component: 900 - total flux cleaned = 0.0011689 Jy ! Component: 950 - total flux cleaned = 0.00116886 Jy ! Component: 1000 - total flux cleaned = 0.00113401 Jy ! Component: 1050 - total flux cleaned = 0.00106546 Jy ! Component: 1100 - total flux cleaned = 0.00103207 Jy ! Component: 1150 - total flux cleaned = 0.000982196 Jy ! Component: 1200 - total flux cleaned = 0.00093313 Jy ! Component: 1250 - total flux cleaned = 0.000916818 Jy ! Component: 1300 - total flux cleaned = 0.000837327 Jy ! Component: 1350 - total flux cleaned = 0.000837433 Jy ! Component: 1400 - total flux cleaned = 0.000806608 Jy ! Component: 1450 - total flux cleaned = 0.000791344 Jy ! Component: 1500 - total flux cleaned = 0.00077628 Jy ! Component: 1550 - total flux cleaned = 0.000731321 Jy ! Component: 1600 - total flux cleaned = 0.000731271 Jy ! Component: 1650 - total flux cleaned = 0.000731114 Jy ! Component: 1700 - total flux cleaned = 0.000701932 Jy ! Component: 1750 - total flux cleaned = 0.000687469 Jy ! Component: 1800 - total flux cleaned = 0.000673107 Jy ! Component: 1850 - total flux cleaned = 0.000658914 Jy ! Component: 1900 - total flux cleaned = 0.00064464 Jy ! Component: 1950 - total flux cleaned = 0.000616367 Jy ! Component: 2000 - total flux cleaned = 0.000588325 Jy ! Component: 2050 - total flux cleaned = 0.000602168 Jy ! Component: 2100 - total flux cleaned = 0.000588206 Jy ! Component: 2150 - total flux cleaned = 0.000602135 Jy ! Component: 2200 - total flux cleaned = 0.000629998 Jy ! Component: 2250 - total flux cleaned = 0.0006161 Jy ! Component: 2300 - total flux cleaned = 0.000630055 Jy ! Component: 2350 - total flux cleaned = 0.000643958 Jy ! Component: 2400 - total flux cleaned = 0.000686306 Jy ! Component: 2450 - total flux cleaned = 0.000686379 Jy ! Component: 2500 - total flux cleaned = 0.000686464 Jy ! Component: 2550 - total flux cleaned = 0.000672072 Jy ! Component: 2600 - total flux cleaned = 0.000642943 Jy ! Component: 2650 - total flux cleaned = 0.000628141 Jy ! Component: 2700 - total flux cleaned = 0.000613364 Jy ! Component: 2750 - total flux cleaned = 0.000643241 Jy ! Component: 2800 - total flux cleaned = 0.000613326 Jy ! Component: 2850 - total flux cleaned = 0.000582924 Jy ! Component: 2900 - total flux cleaned = 0.000629574 Jy ! Component: 2950 - total flux cleaned = 0.000598369 Jy ! Component: 3000 - total flux cleaned = 0.000614354 Jy ! Component: 3050 - total flux cleaned = 0.00061457 Jy ! Component: 3100 - total flux cleaned = 0.00063118 Jy ! Component: 3150 - total flux cleaned = 0.000631168 Jy ! Component: 3200 - total flux cleaned = 0.000665002 Jy ! Component: 3250 - total flux cleaned = 0.000665098 Jy ! Component: 3300 - total flux cleaned = 0.000700125 Jy ! Component: 3350 - total flux cleaned = 0.000700103 Jy ! Component: 3400 - total flux cleaned = 0.00073615 Jy ! Component: 3450 - total flux cleaned = 0.000736134 Jy ! Component: 3500 - total flux cleaned = 0.00079219 Jy ! Component: 3550 - total flux cleaned = 0.000811437 Jy ! Component: 3600 - total flux cleaned = 0.000830664 Jy ! Component: 3650 - total flux cleaned = 0.000869966 Jy ! Component: 3700 - total flux cleaned = 0.000909896 Jy ! Component: 3750 - total flux cleaned = 0.000970931 Jy ! Component: 3800 - total flux cleaned = 0.000991783 Jy ! Component: 3850 - total flux cleaned = 0.00103406 Jy ! Component: 3900 - total flux cleaned = 0.00107676 Jy ! Component: 3950 - total flux cleaned = 0.00112017 Jy ! Component: 4000 - total flux cleaned = 0.00116449 Jy ! Component: 4050 - total flux cleaned = 0.00118706 Jy ! Total flux subtracted in 4096 components = 0.00120983 Jy ! Clean residual min=-0.001374 max=0.001363 Jy/beam ! Clean residual mean=0.000003 rms=0.000383 Jy/beam ! Combined flux in latest and established models = 0.0985432 Jy keep ! Adding 178 model components to the UV plane model. ! The established model now contains 356 components and 0.0985433 Jy ![Exited script file: muppet] wmap "J0524-3126_S_2017_10_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.348 x 31.12 at -12.7 degrees (North through East) ! Clean map min=-0.0048086 max=0.060926 Jy/beam ! Writing clean map to FITS file: J0524-3126_S_2017_10_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0609255 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00041472 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -2.0421 2.0421 4.0842 8.16839 16.3368 32.6736 65.3471 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0012 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.06 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.348 x 31.12 at -12.7 degrees (North through East) ! Clean map min=-0.0048086 max=0.060926 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0524-3126_S_2017_10_09_pus_uvs.log closed on Sun May 12 13:05:06 2019