! Started logfile: J0524-2818_S_2017_06_10_pus_uvs.log on Mon May 6 14:45:43 2019 obs J0524-2818_S_2017_06_10_pus_uva.fits ! Reading UV FITS file: J0524-2818_S_2017_06_10_pus_uva.fits ! AN table 1: 54 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.960082 visibilities/baseline/integration-bin. ! Found source: J0524-2818 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1154 lines of history. ! ! Reading 9332 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0524-2818_S_2017_06_10_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 25 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 64 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 37 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 282 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.859324Jy sigma=0.005884 ! Fit after self-cal, rms=0.835656Jy sigma=0.005731 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.514 mas, bmaj=6.818 mas, bpa=-11.17 degrees ! Estimated noise=1788.35 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.127439 Jy ! Component: 100 - total flux cleaned = 0.161979 Jy ! Total flux subtracted in 100 components = 0.161979 Jy ! Clean residual min=-0.009742 max=0.023019 Jy/beam ! Clean residual mean=0.000054 rms=0.002826 Jy/beam ! Combined flux in latest and established models = 0.161979 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.161979 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113020Jy sigma=0.000733 ! Fit after self-cal, rms=0.112997Jy sigma=0.000733 ! Inverting map ! Added new window around map position (3.5, -9). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0203482 Jy ! Component: 100 - total flux cleaned = 0.0308824 Jy ! Total flux subtracted in 100 components = 0.0308824 Jy ! Clean residual min=-0.008524 max=0.016217 Jy/beam ! Clean residual mean=0.000063 rms=0.002154 Jy/beam ! Combined flux in latest and established models = 0.192861 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 19 components and 0.192861 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109010Jy sigma=0.000702 ! Fit after self-cal, rms=0.108742Jy sigma=0.000700 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.95 mas, bmaj=7.725 mas, bpa=-9.584 degrees ! Estimated noise=1268.7 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-3.5, 9). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0116588 Jy ! Component: 100 - total flux cleaned = 0.0176917 Jy ! Component: 150 - total flux cleaned = 0.0192207 Jy ! Component: 200 - total flux cleaned = 0.0201566 Jy ! Total flux subtracted in 200 components = 0.0201566 Jy ! Clean residual min=-0.005149 max=0.006243 Jy/beam ! Clean residual mean=0.000051 rms=0.001556 Jy/beam ! Combined flux in latest and established models = 0.213018 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 45 components and 0.213018 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107409Jy sigma=0.000691 ! Fit after self-cal, rms=0.107428Jy sigma=0.000691 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.22 FD 0.91 HN 1.10 KP 1.06 ! LA 0.99 MK 0.99 NL 0.91 OV 0.98 ! PT 1.03 SC 0.91 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.96 HN 1.04 KP 1.01 ! LA 1.00 MK 0.99 NL 1.05 OV 0.99 ! PT 0.99 SC 0.99 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 0.99 HN 1.01 KP 1.00 ! LA 0.99 MK 1.02 NL 1.03 OV 0.90 ! PT 1.01 SC 0.97 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.07 HN 1.09 KP 1.00* ! LA 0.84 MK 0.92 NL 1.00* OV 1.00* ! PT 1.06 SC 1.00* ! ! ! Fit before self-cal, rms=0.107428Jy sigma=0.000691 ! Fit after self-cal, rms=0.109800Jy sigma=0.000685 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.94 mas, bmaj=7.665 mas, bpa=-9.231 degrees ! Estimated noise=1260.4 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00244366 Jy ! Component: 100 - total flux cleaned = -0.00269449 Jy ! Component: 150 - total flux cleaned = -0.00284118 Jy ! Component: 200 - total flux cleaned = -0.00290943 Jy ! Total flux subtracted in 200 components = -0.00290943 Jy ! Clean residual min=-0.004711 max=0.005530 Jy/beam ! Clean residual mean=0.000020 rms=0.001378 Jy/beam ! Combined flux in latest and established models = 0.210109 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 65 components and 0.210109 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109663Jy sigma=0.000684 ! Fit after self-cal, rms=0.109735Jy sigma=0.000684 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109735Jy sigma=0.000684 ! Fit after self-cal, rms=0.121136Jy sigma=0.000675 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.941 mas, bmaj=7.685 mas, bpa=-9.358 degrees ! Estimated noise=1268.83 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000752779 Jy ! Component: 100 - total flux cleaned = -0.000948641 Jy ! Component: 150 - total flux cleaned = -0.00105503 Jy ! Component: 200 - total flux cleaned = -0.00110243 Jy ! Total flux subtracted in 200 components = -0.00110243 Jy ! Clean residual min=-0.003829 max=0.005234 Jy/beam ! Clean residual mean=0.000005 rms=0.001078 Jy/beam ! Combined flux in latest and established models = 0.209006 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 79 components and 0.209006 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121066Jy sigma=0.000675 ! Fit after self-cal, rms=0.121297Jy sigma=0.000675 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (30.5, 2.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00459102 Jy ! Component: 100 - total flux cleaned = 0.00679434 Jy ! Component: 150 - total flux cleaned = 0.00770944 Jy ! Component: 200 - total flux cleaned = 0.00811808 Jy ! Total flux subtracted in 200 components = 0.00811808 Jy ! Clean residual min=-0.003470 max=0.003481 Jy/beam ! Clean residual mean=-0.000000 rms=0.000925 Jy/beam ! Combined flux in latest and established models = 0.217124 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 109 components and 0.217124 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121110Jy sigma=0.000673 ! Fit after self-cal, rms=0.121115Jy sigma=0.000673 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121115Jy sigma=0.000673 ! Fit after self-cal, rms=0.126974Jy sigma=0.000673 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.945 mas, bmaj=7.713 mas, bpa=-9.305 degrees ! Estimated noise=1268.01 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.03544e-05 Jy ! Component: 100 - total flux cleaned = 0.000362396 Jy ! Component: 150 - total flux cleaned = 0.000609943 Jy ! Component: 200 - total flux cleaned = 0.000918856 Jy ! Total flux subtracted in 200 components = 0.000918856 Jy ! Clean residual min=-0.003261 max=0.003495 Jy/beam ! Clean residual mean=-0.000002 rms=0.000866 Jy/beam ! Combined flux in latest and established models = 0.218043 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 128 components and 0.218043 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126903Jy sigma=0.000672 ! Fit after self-cal, rms=0.126949Jy sigma=0.000672 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00030107 Jy ! Component: 100 - total flux cleaned = 0.00061606 Jy ! Component: 150 - total flux cleaned = 0.000652121 Jy ! Component: 200 - total flux cleaned = 0.000687897 Jy ! Total flux subtracted in 200 components = 0.000687897 Jy ! Clean residual min=-0.003204 max=0.003450 Jy/beam ! Clean residual mean=-0.000002 rms=0.000857 Jy/beam ! Combined flux in latest and established models = 0.218731 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 140 components and 0.218731 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126914Jy sigma=0.000672 ! Fit after self-cal, rms=0.126912Jy sigma=0.000672 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126912Jy sigma=0.000672 ! Fit after self-cal, rms=0.127950Jy sigma=0.000672 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.621 mas, bmaj=18.69 mas, bpa=-4.56 degrees ! Estimated noise=1684.75 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00129705 Jy ! Component: 100 - total flux cleaned = 0.00154347 Jy ! Component: 150 - total flux cleaned = 0.00164584 Jy ! Component: 200 - total flux cleaned = 0.00173519 Jy ! Total flux subtracted in 200 components = 0.00173519 Jy ! Clean residual min=-0.003636 max=0.003978 Jy/beam ! Clean residual mean=-0.000008 rms=0.001178 Jy/beam ! Combined flux in latest and established models = 0.220466 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 152 components and 0.220466 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.127927Jy sigma=0.000672 ! Fit after self-cal, rms=0.127925Jy sigma=0.000672 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000210463 Jy ! Component: 100 - total flux cleaned = 0.000388361 Jy ! Component: 150 - total flux cleaned = 0.000426693 Jy ! Component: 200 - total flux cleaned = 0.00042875 Jy ! Total flux subtracted in 200 components = 0.00042875 Jy ! Clean residual min=-0.003662 max=0.003993 Jy/beam ! Clean residual mean=-0.000009 rms=0.001165 Jy/beam ! Combined flux in latest and established models = 0.220895 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 159 components and 0.220895 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.127914Jy sigma=0.000672 ! Fit after self-cal, rms=0.127906Jy sigma=0.000672 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.948 mas, bmaj=7.74 mas, bpa=-9.249 degrees ! Estimated noise=1267.4 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.948 x 7.74 at -9.249 degrees (North through East) ! Clean map min=-0.0028621 max=0.15865 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.505 mas, bmaj=6.805 mas, bpa=-10.86 degrees ! Estimated noise=1811.53 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.128737 Jy ! Component: 100 - total flux cleaned = 0.164546 Jy ! Component: 150 - total flux cleaned = 0.181593 Jy ! Component: 200 - total flux cleaned = 0.191157 Jy ! Total flux subtracted in 200 components = 0.191157 Jy ! Clean residual min=-0.005904 max=0.005600 Jy/beam ! Clean residual mean=0.000010 rms=0.001425 Jy/beam ! Combined flux in latest and established models = 0.191158 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 24 model components to the UV plane model. ! The established model now contains 24 components and 0.191158 Jy ! Inverting map and beam ! Estimated beam: bmin=2.948 mas, bmaj=7.74 mas, bpa=-9.249 degrees ! Estimated noise=1267.4 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00805345 Jy ! Component: 100 - total flux cleaned = 0.0134142 Jy ! Component: 150 - total flux cleaned = 0.0174426 Jy ! Component: 200 - total flux cleaned = 0.0205606 Jy ! Total flux subtracted in 200 components = 0.0205606 Jy ! Clean residual min=-0.003482 max=0.003468 Jy/beam ! Clean residual mean=-0.000004 rms=0.000941 Jy/beam ! Combined flux in latest and established models = 0.211718 Jy ! Adding 34 model components to the UV plane model. ! The established model now contains 55 components and 0.211718 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.621 mas, bmaj=18.69 mas, bpa=-4.56 degrees ! Estimated noise=1684.75 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00428026 Jy ! Component: 100 - total flux cleaned = 0.0068982 Jy ! Component: 150 - total flux cleaned = 0.00864669 Jy ! Component: 200 - total flux cleaned = 0.00968442 Jy ! Total flux subtracted in 200 components = 0.00968442 Jy ! Clean residual min=-0.003856 max=0.003764 Jy/beam ! Clean residual mean=-0.000005 rms=0.001158 Jy/beam ! Combined flux in latest and established models = 0.221403 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000459065 Jy ! Component: 100 - total flux cleaned = 0.000570184 Jy ! Component: 150 - total flux cleaned = 0.000638498 Jy ! Component: 200 - total flux cleaned = 0.000735854 Jy ! Total flux subtracted in 200 components = 0.000735854 Jy ! Clean residual min=-0.003700 max=0.003700 Jy/beam ! Clean residual mean=-0.000006 rms=0.001128 Jy/beam ! Combined flux in latest and established models = 0.222138 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 81 components and 0.222138 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.948 mas, bmaj=7.74 mas, bpa=-9.249 degrees ! Estimated noise=1267.4 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000775741 Jy ! Component: 100 - total flux cleaned = -0.000843155 Jy ! Component: 150 - total flux cleaned = -0.000902277 Jy ! Component: 200 - total flux cleaned = -0.000900848 Jy ! Total flux subtracted in 200 components = -0.000900848 Jy ! Clean residual min=-0.003074 max=0.003101 Jy/beam ! Clean residual mean=-0.000003 rms=0.000832 Jy/beam ! Combined flux in latest and established models = 0.221238 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 102 components and 0.221238 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.127928Jy sigma=0.000672 ! Fit after self-cal, rms=0.127922Jy sigma=0.000672 wmodel J0524-2818_S_2017_06_10_pus_map.mod ! Writing 102 model components to file: J0524-2818_S_2017_06_10_pus_map.mod wobs J0524-2818_S_2017_06_10_pus_uvs.fits ! Writing UV FITS file: J0524-2818_S_2017_06_10_pus_uvs.fits wwins J0524-2818_S_2017_06_10_pus_map.win ! wwins: Wrote 4 windows to J0524-2818_S_2017_06_10_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000393452 Jy ! Component: 100 - total flux cleaned = -0.000880886 Jy ! Component: 150 - total flux cleaned = -0.0011922 Jy ! Component: 200 - total flux cleaned = -0.00154268 Jy ! Component: 250 - total flux cleaned = -0.00168811 Jy ! Component: 300 - total flux cleaned = -0.00178205 Jy ! Component: 350 - total flux cleaned = -0.00196426 Jy ! Component: 400 - total flux cleaned = -0.00218541 Jy ! Component: 450 - total flux cleaned = -0.0021415 Jy ! Component: 500 - total flux cleaned = -0.00239633 Jy ! Component: 550 - total flux cleaned = -0.00256143 Jy ! Component: 600 - total flux cleaned = -0.00280399 Jy ! Component: 650 - total flux cleaned = -0.00288308 Jy ! Component: 700 - total flux cleaned = -0.00303888 Jy ! Component: 750 - total flux cleaned = -0.00303929 Jy ! Component: 800 - total flux cleaned = -0.00319033 Jy ! Component: 850 - total flux cleaned = -0.0032643 Jy ! Component: 900 - total flux cleaned = -0.00326555 Jy ! Component: 950 - total flux cleaned = -0.00340781 Jy ! Component: 1000 - total flux cleaned = -0.00323234 Jy ! Component: 1050 - total flux cleaned = -0.00326755 Jy ! Component: 1100 - total flux cleaned = -0.00340322 Jy ! Component: 1150 - total flux cleaned = -0.00320251 Jy ! Component: 1200 - total flux cleaned = -0.00333492 Jy ! Component: 1250 - total flux cleaned = -0.0032694 Jy ! Component: 1300 - total flux cleaned = -0.00320487 Jy ! Component: 1350 - total flux cleaned = -0.00307858 Jy ! Component: 1400 - total flux cleaned = -0.00304818 Jy ! Component: 1450 - total flux cleaned = -0.00301727 Jy ! Component: 1500 - total flux cleaned = -0.00298711 Jy ! Component: 1550 - total flux cleaned = -0.0028668 Jy ! Component: 1600 - total flux cleaned = -0.00280779 Jy ! Component: 1650 - total flux cleaned = -0.00274912 Jy ! Component: 1700 - total flux cleaned = -0.00269136 Jy ! Component: 1750 - total flux cleaned = -0.00257695 Jy ! Component: 1800 - total flux cleaned = -0.0026052 Jy ! Component: 1850 - total flux cleaned = -0.00260476 Jy ! Component: 1900 - total flux cleaned = -0.00265994 Jy ! Component: 1950 - total flux cleaned = -0.00265915 Jy ! Component: 2000 - total flux cleaned = -0.00260498 Jy ! Component: 2050 - total flux cleaned = -0.00265904 Jy ! Component: 2100 - total flux cleaned = -0.00260645 Jy ! Component: 2150 - total flux cleaned = -0.00263257 Jy ! Component: 2200 - total flux cleaned = -0.00265839 Jy ! Component: 2250 - total flux cleaned = -0.00263274 Jy ! Component: 2300 - total flux cleaned = -0.00265805 Jy ! Component: 2350 - total flux cleaned = -0.0026834 Jy ! Component: 2400 - total flux cleaned = -0.00275854 Jy ! Component: 2450 - total flux cleaned = -0.00275877 Jy ! Component: 2500 - total flux cleaned = -0.00273397 Jy ! Component: 2550 - total flux cleaned = -0.00273377 Jy ! Component: 2600 - total flux cleaned = -0.00273409 Jy ! Component: 2650 - total flux cleaned = -0.00278171 Jy ! Component: 2700 - total flux cleaned = -0.00278197 Jy ! Component: 2750 - total flux cleaned = -0.00268798 Jy ! Component: 2800 - total flux cleaned = -0.00250178 Jy ! Component: 2850 - total flux cleaned = -0.00252486 Jy ! Component: 2900 - total flux cleaned = -0.00254761 Jy ! Component: 2950 - total flux cleaned = -0.00247949 Jy ! Component: 3000 - total flux cleaned = -0.00243442 Jy ! Component: 3050 - total flux cleaned = -0.00236755 Jy ! Component: 3100 - total flux cleaned = -0.00241198 Jy ! Component: 3150 - total flux cleaned = -0.00238964 Jy ! Component: 3200 - total flux cleaned = -0.00232401 Jy ! Component: 3250 - total flux cleaned = -0.00225872 Jy ! Component: 3300 - total flux cleaned = -0.00223708 Jy ! Component: 3350 - total flux cleaned = -0.0021943 Jy ! Component: 3400 - total flux cleaned = -0.00221545 Jy ! Component: 3450 - total flux cleaned = -0.00215217 Jy ! Component: 3500 - total flux cleaned = -0.0021522 Jy ! Component: 3550 - total flux cleaned = -0.00215227 Jy ! Component: 3600 - total flux cleaned = -0.00202867 Jy ! Component: 3650 - total flux cleaned = -0.00206955 Jy ! Component: 3700 - total flux cleaned = -0.0019678 Jy ! Component: 3750 - total flux cleaned = -0.00206872 Jy ! Component: 3800 - total flux cleaned = -0.00194856 Jy ! Component: 3850 - total flux cleaned = -0.00198829 Jy ! Component: 3900 - total flux cleaned = -0.00190929 Jy ! Component: 3950 - total flux cleaned = -0.00187 Jy ! Component: 4000 - total flux cleaned = -0.00185036 Jy ! Component: 4050 - total flux cleaned = -0.00185026 Jy ! Total flux subtracted in 4096 components = -0.00175397 Jy ! Clean residual min=-0.001083 max=0.001539 Jy/beam ! Clean residual mean=0.000008 rms=0.000353 Jy/beam ! Combined flux in latest and established models = 0.219484 Jy keep ! Adding 299 model components to the UV plane model. ! The established model now contains 401 components and 0.219484 Jy ![Exited script file: muppet] wmap "J0524-2818_S_2017_06_10_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.948 x 7.74 at -9.249 degrees (North through East) ! Clean map min=-0.0020813 max=0.16082 Jy/beam ! Writing clean map to FITS file: J0524-2818_S_2017_06_10_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.160821 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000354461 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.661222 0.661222 1.32244 2.64489 5.28977 10.5795 21.1591 42.3182 84.6364 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.001 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.16 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.948 x 7.74 at -9.249 degrees (North through East) ! Clean map min=-0.0020813 max=0.16082 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0524-2818_S_2017_06_10_pus_uvs.log closed on Mon May 6 14:45:48 2019