! Started logfile: J0522-4020_S_2017_10_09_pus_uvs.log on Sun May 12 13:04:56 2019 obs J0522-4020_S_2017_10_09_pus_uva.fits ! Reading UV FITS file: J0522-4020_S_2017_10_09_pus_uva.fits ! AN table 1: 144 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.439043 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0522-4020 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 496 lines of history. ! ! Reading 9104 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0522-4020_S_2017_10_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 475 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 475 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 417 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 844 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.884960Jy sigma=0.005211 ! Fit after self-cal, rms=0.849149Jy sigma=0.004991 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.308 mas, bmaj=13.81 mas, bpa=-21.13 degrees ! Estimated noise=2346.39 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.110609 Jy ! Component: 100 - total flux cleaned = 0.144728 Jy ! Total flux subtracted in 100 components = 0.144728 Jy ! Clean residual min=-0.012548 max=0.023868 Jy/beam ! Clean residual mean=-0.000131 rms=0.004443 Jy/beam ! Combined flux in latest and established models = 0.144728 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.144728 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.129952Jy sigma=0.000696 ! Fit after self-cal, rms=0.129959Jy sigma=0.000695 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.984 mas, bmaj=16.73 mas, bpa=-20.99 degrees ! Estimated noise=1486.32 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-5, 17). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0312365 Jy ! Component: 100 - total flux cleaned = 0.0456092 Jy ! Component: 150 - total flux cleaned = 0.0537503 Jy ! Component: 200 - total flux cleaned = 0.0551223 Jy ! Total flux subtracted in 200 components = 0.0551223 Jy ! Clean residual min=-0.006292 max=0.008335 Jy/beam ! Clean residual mean=-0.000060 rms=0.002071 Jy/beam ! Combined flux in latest and established models = 0.199851 Jy ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 52 components and 0.199851 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122396Jy sigma=0.000652 ! Fit after self-cal, rms=0.122233Jy sigma=0.000651 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.91 HN 1.21 KP 1.04 ! LA 1.04 MK 0.98 NL 0.91 OV 1.00* ! PT 1.03 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.93 HN 1.33 KP 0.97 ! LA 0.97 MK 1.03 NL 1.00 OV 1.00* ! PT 1.01 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.99 HN 1.11 KP 0.89 ! LA 0.80 MK 1.00 NL 1.62 OV 1.00* ! PT 0.99 ! ! ! Correcting IF 4. ! A total of 300 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.04 HN 0.86 KP 1.00* ! LA 1.00* MK 0.94 NL 1.00* OV 1.00* ! PT 1.17 ! ! ! Fit before self-cal, rms=0.122233Jy sigma=0.000651 ! Fit after self-cal, rms=0.128713Jy sigma=0.000641 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.07 mas, bmaj=17.15 mas, bpa=-21.52 degrees ! Estimated noise=1550.32 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00183594 Jy ! Component: 100 - total flux cleaned = -0.00222686 Jy ! Component: 150 - total flux cleaned = -0.00222808 Jy ! Component: 200 - total flux cleaned = -0.00242813 Jy ! Total flux subtracted in 200 components = -0.00242813 Jy ! Clean residual min=-0.004394 max=0.004466 Jy/beam ! Clean residual mean=-0.000062 rms=0.001221 Jy/beam ! Combined flux in latest and established models = 0.197422 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 76 components and 0.197422 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128332Jy sigma=0.000640 ! Fit after self-cal, rms=0.128624Jy sigma=0.000639 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128624Jy sigma=0.000639 ! Fit after self-cal, rms=0.134613Jy sigma=0.000635 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.07 mas, bmaj=17.24 mas, bpa=-21.72 degrees ! Estimated noise=1552.44 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.8977e-05 Jy ! Component: 100 - total flux cleaned = -0.000113022 Jy ! Component: 150 - total flux cleaned = -0.000148189 Jy ! Component: 200 - total flux cleaned = -0.000214281 Jy ! Total flux subtracted in 200 components = -0.000214281 Jy ! Clean residual min=-0.003063 max=0.002853 Jy/beam ! Clean residual mean=-0.000034 rms=0.000803 Jy/beam ! Combined flux in latest and established models = 0.197208 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 96 components and 0.197208 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.134573Jy sigma=0.000635 ! Fit after self-cal, rms=0.134642Jy sigma=0.000634 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000233011 Jy ! Component: 100 - total flux cleaned = 0.000166114 Jy ! Component: 150 - total flux cleaned = 0.000136567 Jy ! Component: 200 - total flux cleaned = 0.000136853 Jy ! Total flux subtracted in 200 components = 0.000136853 Jy ! Clean residual min=-0.003092 max=0.002817 Jy/beam ! Clean residual mean=-0.000035 rms=0.000794 Jy/beam ! Combined flux in latest and established models = 0.197345 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 105 components and 0.197345 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.134617Jy sigma=0.000634 ! Fit after self-cal, rms=0.134624Jy sigma=0.000634 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.134624Jy sigma=0.000634 ! Fit after self-cal, rms=0.135648Jy sigma=0.000634 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.071 mas, bmaj=17.23 mas, bpa=-21.74 degrees ! Estimated noise=1553.06 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000113991 Jy ! Component: 100 - total flux cleaned = -0.000240469 Jy ! Component: 150 - total flux cleaned = -0.000295649 Jy ! Component: 200 - total flux cleaned = -0.000295956 Jy ! Total flux subtracted in 200 components = -0.000295956 Jy ! Clean residual min=-0.003107 max=0.002742 Jy/beam ! Clean residual mean=-0.000033 rms=0.000783 Jy/beam ! Combined flux in latest and established models = 0.197049 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 113 components and 0.197049 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.135626Jy sigma=0.000634 ! Fit after self-cal, rms=0.135646Jy sigma=0.000634 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.70482e-05 Jy ! Component: 100 - total flux cleaned = -7.38532e-06 Jy ! Component: 150 - total flux cleaned = -3.0034e-05 Jy ! Component: 200 - total flux cleaned = -5.22749e-05 Jy ! Total flux subtracted in 200 components = -5.22749e-05 Jy ! Clean residual min=-0.003108 max=0.002729 Jy/beam ! Clean residual mean=-0.000034 rms=0.000785 Jy/beam ! Combined flux in latest and established models = 0.196997 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 121 components and 0.196997 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.135630Jy sigma=0.000634 ! Fit after self-cal, rms=0.135638Jy sigma=0.000634 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.135638Jy sigma=0.000634 ! Fit after self-cal, rms=0.135877Jy sigma=0.000634 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.862 mas, bmaj=44.04 mas, bpa=-10.99 degrees ! Estimated noise=1933.51 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.94664e-05 Jy ! Component: 100 - total flux cleaned = -0.000107724 Jy ! Component: 150 - total flux cleaned = -0.000124174 Jy ! Component: 200 - total flux cleaned = -0.00015419 Jy ! Total flux subtracted in 200 components = -0.00015419 Jy ! Clean residual min=-0.003491 max=0.002642 Jy/beam ! Clean residual mean=-0.000061 rms=0.000972 Jy/beam ! Combined flux in latest and established models = 0.196843 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 148 components and 0.196843 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.135873Jy sigma=0.000634 ! Fit after self-cal, rms=0.135881Jy sigma=0.000634 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.2846e-05 Jy ! Component: 100 - total flux cleaned = 3.46385e-05 Jy ! Component: 150 - total flux cleaned = 9.98113e-06 Jy ! Component: 200 - total flux cleaned = -1.43261e-06 Jy ! Total flux subtracted in 200 components = -1.43261e-06 Jy ! Clean residual min=-0.003489 max=0.002648 Jy/beam ! Clean residual mean=-0.000061 rms=0.000972 Jy/beam ! Combined flux in latest and established models = 0.196841 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 169 components and 0.196841 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.135879Jy sigma=0.000634 ! Fit after self-cal, rms=0.135880Jy sigma=0.000634 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.072 mas, bmaj=17.23 mas, bpa=-21.74 degrees ! Estimated noise=1554.8 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.072 x 17.23 at -21.74 degrees (North through East) ! Clean map min=-0.0041818 max=0.12817 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.315 mas, bmaj=14.02 mas, bpa=-22.05 degrees ! Estimated noise=2546.73 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.115652 Jy ! Component: 100 - total flux cleaned = 0.151043 Jy ! Component: 150 - total flux cleaned = 0.169498 Jy ! Component: 200 - total flux cleaned = 0.180266 Jy ! Total flux subtracted in 200 components = 0.180266 Jy ! Clean residual min=-0.006405 max=0.008871 Jy/beam ! Clean residual mean=-0.000054 rms=0.001695 Jy/beam ! Combined flux in latest and established models = 0.180266 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 38 model components to the UV plane model. ! The established model now contains 38 components and 0.180266 Jy ! Inverting map and beam ! Estimated beam: bmin=3.072 mas, bmaj=17.23 mas, bpa=-21.74 degrees ! Estimated noise=1554.8 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (4.5, -16). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00978228 Jy ! Component: 100 - total flux cleaned = 0.0149584 Jy ! Component: 150 - total flux cleaned = 0.0166081 Jy ! Component: 200 - total flux cleaned = 0.0173157 Jy ! Total flux subtracted in 200 components = 0.0173157 Jy ! Clean residual min=-0.003245 max=0.003146 Jy/beam ! Clean residual mean=-0.000028 rms=0.000893 Jy/beam ! Combined flux in latest and established models = 0.197582 Jy ! Adding 41 model components to the UV plane model. ! The established model now contains 79 components and 0.197582 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.862 mas, bmaj=44.04 mas, bpa=-10.99 degrees ! Estimated noise=1933.51 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.26353e-05 Jy ! Component: 100 - total flux cleaned = -6.24647e-05 Jy ! Component: 150 - total flux cleaned = -0.000120669 Jy ! Component: 200 - total flux cleaned = -0.000221428 Jy ! Total flux subtracted in 200 components = -0.000221428 Jy ! Clean residual min=-0.003276 max=0.002975 Jy/beam ! Clean residual mean=-0.000055 rms=0.000980 Jy/beam ! Combined flux in latest and established models = 0.197361 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.29511e-05 Jy ! Component: 100 - total flux cleaned = -8.07736e-05 Jy ! Component: 150 - total flux cleaned = -0.000111348 Jy ! Component: 200 - total flux cleaned = -0.000109803 Jy ! Total flux subtracted in 200 components = -0.000109803 Jy ! Clean residual min=-0.003169 max=0.002856 Jy/beam ! Clean residual mean=-0.000057 rms=0.000957 Jy/beam ! Combined flux in latest and established models = 0.197251 Jy ! Adding 74 model components to the UV plane model. ! The established model now contains 149 components and 0.197251 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.072 mas, bmaj=17.23 mas, bpa=-21.74 degrees ! Estimated noise=1554.8 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000438008 Jy ! Component: 100 - total flux cleaned = 0.000340274 Jy ! Component: 150 - total flux cleaned = 0.000251099 Jy ! Component: 200 - total flux cleaned = 0.000172359 Jy ! Total flux subtracted in 200 components = 0.000172359 Jy ! Clean residual min=-0.002989 max=0.002873 Jy/beam ! Clean residual mean=-0.000031 rms=0.000783 Jy/beam ! Combined flux in latest and established models = 0.197423 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 175 components and 0.197423 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.135879Jy sigma=0.000634 ! Fit after self-cal, rms=0.135818Jy sigma=0.000634 wmodel J0522-4020_S_2017_10_09_pus_map.mod ! Writing 175 model components to file: J0522-4020_S_2017_10_09_pus_map.mod wobs J0522-4020_S_2017_10_09_pus_uvs.fits ! Writing UV FITS file: J0522-4020_S_2017_10_09_pus_uvs.fits wwins J0522-4020_S_2017_10_09_pus_map.win ! wwins: Wrote 3 windows to J0522-4020_S_2017_10_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000227755 Jy ! Component: 100 - total flux cleaned = -0.000512828 Jy ! Component: 150 - total flux cleaned = -0.000554854 Jy ! Component: 200 - total flux cleaned = -0.000597466 Jy ! Component: 250 - total flux cleaned = -0.000712117 Jy ! Component: 300 - total flux cleaned = -0.00071216 Jy ! Component: 350 - total flux cleaned = -0.000676491 Jy ! Component: 400 - total flux cleaned = -0.000743299 Jy ! Component: 450 - total flux cleaned = -0.000775501 Jy ! Component: 500 - total flux cleaned = -0.00064961 Jy ! Component: 550 - total flux cleaned = -0.000496666 Jy ! Component: 600 - total flux cleaned = -0.000318715 Jy ! Component: 650 - total flux cleaned = -0.000347633 Jy ! Component: 700 - total flux cleaned = -0.000234042 Jy ! Component: 750 - total flux cleaned = -0.000151776 Jy ! Component: 800 - total flux cleaned = -0.00012525 Jy ! Component: 850 - total flux cleaned = -7.23827e-05 Jy ! Component: 900 - total flux cleaned = 3.13864e-05 Jy ! Component: 950 - total flux cleaned = 8.23698e-05 Jy ! Component: 1000 - total flux cleaned = 0.000132368 Jy ! Component: 1050 - total flux cleaned = 0.000108085 Jy ! Component: 1100 - total flux cleaned = 6.0208e-05 Jy ! Component: 1150 - total flux cleaned = 3.68954e-05 Jy ! Component: 1200 - total flux cleaned = 1.3701e-05 Jy ! Component: 1250 - total flux cleaned = 1.37255e-05 Jy ! Component: 1300 - total flux cleaned = -0.000100768 Jy ! Component: 1350 - total flux cleaned = -0.000168742 Jy ! Component: 1400 - total flux cleaned = -0.000258287 Jy ! Component: 1450 - total flux cleaned = -0.00030252 Jy ! Component: 1500 - total flux cleaned = -0.000390121 Jy ! Component: 1550 - total flux cleaned = -0.000390248 Jy ! Component: 1600 - total flux cleaned = -0.000497942 Jy ! Component: 1650 - total flux cleaned = -0.000561759 Jy ! Component: 1700 - total flux cleaned = -0.000624935 Jy ! Component: 1750 - total flux cleaned = -0.000729442 Jy ! Component: 1800 - total flux cleaned = -0.000812406 Jy ! Component: 1850 - total flux cleaned = -0.000853497 Jy ! Component: 1900 - total flux cleaned = -0.000955482 Jy ! Component: 1950 - total flux cleaned = -0.000995634 Jy ! Component: 2000 - total flux cleaned = -0.00105591 Jy ! Component: 2050 - total flux cleaned = -0.00111557 Jy ! Component: 2100 - total flux cleaned = -0.0011948 Jy ! Component: 2150 - total flux cleaned = -0.00131311 Jy ! Component: 2200 - total flux cleaned = -0.00141123 Jy ! Component: 2250 - total flux cleaned = -0.00148941 Jy ! Component: 2300 - total flux cleaned = -0.00160614 Jy ! Component: 2350 - total flux cleaned = -0.00172239 Jy ! Component: 2400 - total flux cleaned = -0.00183809 Jy ! Component: 2450 - total flux cleaned = -0.00193423 Jy ! Component: 2500 - total flux cleaned = -0.00210646 Jy ! Component: 2550 - total flux cleaned = -0.0021637 Jy ! Component: 2600 - total flux cleaned = -0.00231582 Jy ! Component: 2650 - total flux cleaned = -0.00246752 Jy ! Component: 2700 - total flux cleaned = -0.00256206 Jy ! Component: 2750 - total flux cleaned = -0.00269423 Jy ! Component: 2800 - total flux cleaned = -0.00282624 Jy ! Component: 2850 - total flux cleaned = -0.00295793 Jy ! Component: 2900 - total flux cleaned = -0.00307088 Jy ! Component: 2950 - total flux cleaned = -0.00320232 Jy ! Component: 3000 - total flux cleaned = -0.00333353 Jy ! Component: 3050 - total flux cleaned = -0.00350229 Jy ! Component: 3100 - total flux cleaned = -0.0036335 Jy ! Component: 3150 - total flux cleaned = -0.00368976 Jy ! Component: 3200 - total flux cleaned = -0.00383981 Jy ! Component: 3250 - total flux cleaned = -0.00397111 Jy ! Component: 3300 - total flux cleaned = -0.00408391 Jy ! Component: 3350 - total flux cleaned = -0.00415917 Jy ! Component: 3400 - total flux cleaned = -0.00429107 Jy ! Component: 3450 - total flux cleaned = -0.00432874 Jy ! Component: 3500 - total flux cleaned = -0.00444218 Jy ! Component: 3550 - total flux cleaned = -0.00451807 Jy ! Component: 3600 - total flux cleaned = -0.00459418 Jy ! Component: 3650 - total flux cleaned = -0.00463246 Jy ! Component: 3700 - total flux cleaned = -0.00469018 Jy ! Component: 3750 - total flux cleaned = -0.004748 Jy ! Component: 3800 - total flux cleaned = -0.00482548 Jy ! Component: 3850 - total flux cleaned = -0.00484493 Jy ! Component: 3900 - total flux cleaned = -0.00492332 Jy ! Component: 3950 - total flux cleaned = -0.00494303 Jy ! Component: 4000 - total flux cleaned = -0.00496278 Jy ! Component: 4050 - total flux cleaned = -0.00502288 Jy ! Total flux subtracted in 4096 components = -0.00510332 Jy ! Clean residual min=-0.001216 max=0.001128 Jy/beam ! Clean residual mean=-0.000031 rms=0.000351 Jy/beam ! Combined flux in latest and established models = 0.19232 Jy keep ! Adding 217 model components to the UV plane model. ! The established model now contains 392 components and 0.19232 Jy ![Exited script file: muppet] wmap "J0522-4020_S_2017_10_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.072 x 17.23 at -21.74 degrees (North through East) ! Clean map min=-0.0034037 max=0.12682 Jy/beam ! Writing clean map to FITS file: J0522-4020_S_2017_10_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.126819 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000364979 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.863387 0.863387 1.72677 3.45355 6.90709 13.8142 27.6284 55.2567 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.001 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.126 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.072 x 17.23 at -21.74 degrees (North through East) ! Clean map min=-0.0034037 max=0.12682 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0522-4020_S_2017_10_09_pus_uvs.log closed on Sun May 12 13:05:01 2019