! Started logfile: J0522-4020_S_2017_02_24_pus_uvs.log on Sat May 4 11:19:02 2019 obs J0522-4020_S_2017_02_24_pus_uva.fits ! Reading UV FITS file: J0522-4020_S_2017_02_24_pus_uva.fits ! AN table 1: 96 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.596759 visibilities/baseline/integration-bin. ! Found source: J0522-4020 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 823 lines of history. ! ! Reading 10312 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0522-4020_S_2017_02_24_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 304 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 295 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 328 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 586 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.887836Jy sigma=0.030112 ! Fit after self-cal, rms=0.843665Jy sigma=0.029724 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.432 mas, bmaj=8.965 mas, bpa=-9.112 degrees ! Estimated noise=1148.29 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0557622 Jy ! Component: 100 - total flux cleaned = 0.0567467 Jy ! Total flux subtracted in 100 components = 0.0567467 Jy ! Clean residual min=-0.032492 max=0.037785 Jy/beam ! Clean residual mean=0.000411 rms=0.013347 Jy/beam ! Combined flux in latest and established models = 0.0567467 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.0567467 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.185223Jy sigma=0.001818 ! Fit after self-cal, rms=0.185081Jy sigma=0.001811 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.277 mas, bmaj=9.713 mas, bpa=-8.169 degrees ! Estimated noise=983.064 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0404136 Jy ! Component: 100 - total flux cleaned = 0.0418136 Jy ! Component: 150 - total flux cleaned = 0.0413901 Jy ! Component: 200 - total flux cleaned = 0.0410457 Jy ! Total flux subtracted in 200 components = 0.0410457 Jy ! Clean residual min=-0.032805 max=0.040476 Jy/beam ! Clean residual mean=0.001932 rms=0.012613 Jy/beam ! Combined flux in latest and established models = 0.0977924 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 12 components and 0.0977924 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.162322Jy sigma=0.002891 ! Fit after self-cal, rms=0.162271Jy sigma=0.002891 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.71 HN 1.25 KP 0.75 ! LA 0.68 MK 1.05 NL 0.72 OV 0.79 ! PT 0.71 SC 0.99 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.66 HN 1.66 KP 0.66 ! LA 0.72 MK 0.98 NL 0.82 OV 0.82 ! PT 0.73 SC 1.04 ! ! ! Correcting IF 3. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.70 HN 1.33 KP 0.71 ! LA 0.69 MK 0.97 NL 0.95 OV 0.74 ! PT 0.70 SC 1.01 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.79 HN 1.00 KP 1.00* ! LA 28.76 MK 1.00 NL 1.00* OV 0.79 ! PT 0.77 SC 1.00* ! ! ! Fit before self-cal, rms=0.162271Jy sigma=0.002891 ! Fit after self-cal, rms=1.089883Jy sigma=0.000718 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.331 mas, bmaj=8.564 mas, bpa=-6.468 degrees ! Estimated noise=1006.34 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-4.5, 22). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.007317 Jy ! Component: 100 - total flux cleaned = 0.00820204 Jy ! Component: 150 - total flux cleaned = 0.00863765 Jy ! Component: 200 - total flux cleaned = 0.00900101 Jy ! Total flux subtracted in 200 components = 0.00900101 Jy ! Clean residual min=-0.006455 max=0.005327 Jy/beam ! Clean residual mean=0.000022 rms=0.001397 Jy/beam ! Combined flux in latest and established models = 0.106793 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 32 components and 0.106793 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.089635Jy sigma=0.000713 ! Fit after self-cal, rms=1.091286Jy sigma=0.000706 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.091286Jy sigma=0.000706 ! Fit after self-cal, rms=1.349270Jy sigma=0.000700 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.252 mas, bmaj=8.572 mas, bpa=-6.237 degrees ! Estimated noise=1021.73 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00398074 Jy ! Component: 100 - total flux cleaned = 0.00499087 Jy ! Component: 150 - total flux cleaned = 0.00527752 Jy ! Component: 200 - total flux cleaned = 0.00540236 Jy ! Total flux subtracted in 200 components = 0.00540236 Jy ! Clean residual min=-0.004980 max=0.004351 Jy/beam ! Clean residual mean=-0.000001 rms=0.001243 Jy/beam ! Combined flux in latest and established models = 0.112196 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 48 components and 0.112196 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.348827Jy sigma=0.000700 ! Fit after self-cal, rms=1.349007Jy sigma=0.000700 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000127075 Jy ! Component: 100 - total flux cleaned = 0.000243504 Jy ! Component: 150 - total flux cleaned = 0.000295456 Jy ! Component: 200 - total flux cleaned = 0.000294702 Jy ! Total flux subtracted in 200 components = 0.000294702 Jy ! Clean residual min=-0.004917 max=0.004453 Jy/beam ! Clean residual mean=0.000002 rms=0.001236 Jy/beam ! Combined flux in latest and established models = 0.11249 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 59 components and 0.11249 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.348933Jy sigma=0.000700 ! Fit after self-cal, rms=1.348922Jy sigma=0.000700 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.348922Jy sigma=0.000700 ! Fit after self-cal, rms=0.129986Jy sigma=0.000682 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.225 mas, bmaj=8.526 mas, bpa=-6.494 degrees ! Estimated noise=1019.4 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.23106e-05 Jy ! Component: 100 - total flux cleaned = -0.000194371 Jy ! Component: 150 - total flux cleaned = -0.000339643 Jy ! Component: 200 - total flux cleaned = -0.000425398 Jy ! Total flux subtracted in 200 components = -0.000425398 Jy ! Clean residual min=-0.002717 max=0.002533 Jy/beam ! Clean residual mean=-0.000022 rms=0.000675 Jy/beam ! Combined flux in latest and established models = 0.112065 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 73 components and 0.112065 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.129920Jy sigma=0.000682 ! Fit after self-cal, rms=0.129666Jy sigma=0.000681 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000277 Jy ! Component: 100 - total flux cleaned = -0.000316777 Jy ! Component: 150 - total flux cleaned = -0.000391333 Jy ! Component: 200 - total flux cleaned = -0.000391165 Jy ! Total flux subtracted in 200 components = -0.000391165 Jy ! Clean residual min=-0.002743 max=0.002403 Jy/beam ! Clean residual mean=-0.000022 rms=0.000677 Jy/beam ! Combined flux in latest and established models = 0.111674 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 79 components and 0.111674 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.129628Jy sigma=0.000681 ! Fit after self-cal, rms=0.129625Jy sigma=0.000681 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.129625Jy sigma=0.000681 ! Fit after self-cal, rms=0.130316Jy sigma=0.000681 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.404 mas, bmaj=29.06 mas, bpa=-2.826 degrees ! Estimated noise=1156.79 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.52735e-05 Jy ! Component: 100 - total flux cleaned = 5.19455e-05 Jy ! Component: 150 - total flux cleaned = 1.68013e-05 Jy ! Component: 200 - total flux cleaned = 2.57043e-06 Jy ! Total flux subtracted in 200 components = 2.57043e-06 Jy ! Clean residual min=-0.002458 max=0.002400 Jy/beam ! Clean residual mean=-0.000042 rms=0.000739 Jy/beam ! Combined flux in latest and established models = 0.111676 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 91 components and 0.111676 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.130314Jy sigma=0.000681 ! Fit after self-cal, rms=0.130299Jy sigma=0.000681 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.67835e-05 Jy ! Component: 100 - total flux cleaned = -8.70098e-05 Jy ! Component: 150 - total flux cleaned = -7.49623e-05 Jy ! Component: 200 - total flux cleaned = -6.3503e-05 Jy ! Total flux subtracted in 200 components = -6.3503e-05 Jy ! Clean residual min=-0.002498 max=0.002382 Jy/beam ! Clean residual mean=-0.000043 rms=0.000735 Jy/beam ! Combined flux in latest and established models = 0.111613 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 96 components and 0.111613 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.130300Jy sigma=0.000681 ! Fit after self-cal, rms=0.130295Jy sigma=0.000681 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.212 mas, bmaj=8.503 mas, bpa=-6.605 degrees ! Estimated noise=1019.54 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.212 x 8.503 at -6.605 degrees (North through East) ! Clean map min=-0.0044347 max=0.11786 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.463 mas, bmaj=6.548 mas, bpa=-5.018 degrees ! Estimated noise=1850.9 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0917053 Jy ! Component: 100 - total flux cleaned = 0.111736 Jy ! Component: 150 - total flux cleaned = 0.113616 Jy ! Component: 200 - total flux cleaned = 0.114079 Jy ! Total flux subtracted in 200 components = 0.114079 Jy ! Clean residual min=-0.005302 max=0.004584 Jy/beam ! Clean residual mean=-0.000013 rms=0.001221 Jy/beam ! Combined flux in latest and established models = 0.114079 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.114079 Jy ! Inverting map and beam ! Estimated beam: bmin=3.212 mas, bmaj=8.503 mas, bpa=-6.605 degrees ! Estimated noise=1019.54 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00150368 Jy ! Component: 100 - total flux cleaned = -0.00173476 Jy ! Component: 150 - total flux cleaned = -0.00183668 Jy ! Component: 200 - total flux cleaned = -0.00184112 Jy ! Total flux subtracted in 200 components = -0.00184112 Jy ! Clean residual min=-0.002871 max=0.003121 Jy/beam ! Clean residual mean=-0.000021 rms=0.000717 Jy/beam ! Combined flux in latest and established models = 0.112238 Jy ! Adding 22 model components to the UV plane model. ! The established model now contains 32 components and 0.112238 Jy ! Inverting map ! Added new window around map position (41.5, -22). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00206043 Jy ! Component: 100 - total flux cleaned = 0.00220691 Jy ! Component: 150 - total flux cleaned = 0.00240052 Jy ! Component: 200 - total flux cleaned = 0.00245874 Jy ! Total flux subtracted in 200 components = 0.00245874 Jy ! Clean residual min=-0.002738 max=0.002335 Jy/beam ! Clean residual mean=-0.000014 rms=0.000650 Jy/beam ! Combined flux in latest and established models = 0.114696 Jy ! Adding 23 model components to the UV plane model. ! The established model now contains 45 components and 0.114696 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.404 mas, bmaj=29.06 mas, bpa=-2.826 degrees ! Estimated noise=1156.79 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000122902 Jy ! Component: 100 - total flux cleaned = 2.39124e-05 Jy ! Component: 150 - total flux cleaned = -4.61336e-05 Jy ! Component: 200 - total flux cleaned = -0.000111789 Jy ! Total flux subtracted in 200 components = -0.000111789 Jy ! Clean residual min=-0.001994 max=0.002158 Jy/beam ! Clean residual mean=-0.000026 rms=0.000657 Jy/beam ! Combined flux in latest and established models = 0.114585 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.61476e-05 Jy ! Component: 100 - total flux cleaned = -9.05032e-05 Jy ! Component: 150 - total flux cleaned = -0.000104367 Jy ! Component: 200 - total flux cleaned = -0.000117968 Jy ! Total flux subtracted in 200 components = -0.000117968 Jy ! Clean residual min=-0.001974 max=0.002123 Jy/beam ! Clean residual mean=-0.000027 rms=0.000655 Jy/beam ! Combined flux in latest and established models = 0.114467 Jy ! Adding 13 model components to the UV plane model. ! The established model now contains 58 components and 0.114467 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.212 mas, bmaj=8.503 mas, bpa=-6.605 degrees ! Estimated noise=1019.54 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.06281e-05 Jy ! Component: 100 - total flux cleaned = 6.17837e-05 Jy ! Component: 150 - total flux cleaned = 6.05383e-05 Jy ! Component: 200 - total flux cleaned = 6.00243e-05 Jy ! Total flux subtracted in 200 components = 6.00243e-05 Jy ! Clean residual min=-0.002708 max=0.002298 Jy/beam ! Clean residual mean=-0.000015 rms=0.000625 Jy/beam ! Combined flux in latest and established models = 0.114527 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 69 components and 0.114527 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.130318Jy sigma=0.000680 ! Fit after self-cal, rms=0.130437Jy sigma=0.000680 wmodel J0522-4020_S_2017_02_24_pus_map.mod ! Writing 69 model components to file: J0522-4020_S_2017_02_24_pus_map.mod wobs J0522-4020_S_2017_02_24_pus_uvs.fits ! Writing UV FITS file: J0522-4020_S_2017_02_24_pus_uvs.fits wwins J0522-4020_S_2017_02_24_pus_map.win ! wwins: Wrote 3 windows to J0522-4020_S_2017_02_24_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00108978 Jy ! Component: 100 - total flux cleaned = -0.00171699 Jy ! Component: 150 - total flux cleaned = -0.0019538 Jy ! Component: 200 - total flux cleaned = -0.0019526 Jy ! Component: 250 - total flux cleaned = -0.00206072 Jy ! Component: 300 - total flux cleaned = -0.00212917 Jy ! Component: 350 - total flux cleaned = -0.00219596 Jy ! Component: 400 - total flux cleaned = -0.00235917 Jy ! Component: 450 - total flux cleaned = -0.0025183 Jy ! Component: 500 - total flux cleaned = -0.00264323 Jy ! Component: 550 - total flux cleaned = -0.0027041 Jy ! Component: 600 - total flux cleaned = -0.00270431 Jy ! Component: 650 - total flux cleaned = -0.00279162 Jy ! Component: 700 - total flux cleaned = -0.00284834 Jy ! Component: 750 - total flux cleaned = -0.00287588 Jy ! Component: 800 - total flux cleaned = -0.00290369 Jy ! Component: 850 - total flux cleaned = -0.00293084 Jy ! Component: 900 - total flux cleaned = -0.00298366 Jy ! Component: 950 - total flux cleaned = -0.00298374 Jy ! Component: 1000 - total flux cleaned = -0.00295841 Jy ! Component: 1050 - total flux cleaned = -0.00290844 Jy ! Component: 1100 - total flux cleaned = -0.00290882 Jy ! Component: 1150 - total flux cleaned = -0.00290871 Jy ! Component: 1200 - total flux cleaned = -0.00293216 Jy ! Component: 1250 - total flux cleaned = -0.00283827 Jy ! Component: 1300 - total flux cleaned = -0.00283797 Jy ! Component: 1350 - total flux cleaned = -0.00270188 Jy ! Component: 1400 - total flux cleaned = -0.00268009 Jy ! Component: 1450 - total flux cleaned = -0.00263572 Jy ! Component: 1500 - total flux cleaned = -0.00252709 Jy ! Component: 1550 - total flux cleaned = -0.00248409 Jy ! Component: 1600 - total flux cleaned = -0.0024414 Jy ! Component: 1650 - total flux cleaned = -0.00231582 Jy ! Component: 1700 - total flux cleaned = -0.00229525 Jy ! Component: 1750 - total flux cleaned = -0.00227454 Jy ! Component: 1800 - total flux cleaned = -0.00221397 Jy ! Component: 1850 - total flux cleaned = -0.00217386 Jy ! Component: 1900 - total flux cleaned = -0.00211443 Jy ! Component: 1950 - total flux cleaned = -0.00211444 Jy ! Component: 2000 - total flux cleaned = -0.00205601 Jy ! Component: 2050 - total flux cleaned = -0.00201762 Jy ! Component: 2100 - total flux cleaned = -0.00196047 Jy ! Component: 2150 - total flux cleaned = -0.00190413 Jy ! Component: 2200 - total flux cleaned = -0.00188538 Jy ! Component: 2250 - total flux cleaned = -0.00181152 Jy ! Component: 2300 - total flux cleaned = -0.00173853 Jy ! Component: 2350 - total flux cleaned = -0.00173862 Jy ! Component: 2400 - total flux cleaned = -0.00163029 Jy ! Component: 2450 - total flux cleaned = -0.00155881 Jy ! Component: 2500 - total flux cleaned = -0.00148779 Jy ! Component: 2550 - total flux cleaned = -0.0014175 Jy ! Component: 2600 - total flux cleaned = -0.00140013 Jy ! Component: 2650 - total flux cleaned = -0.00131358 Jy ! Component: 2700 - total flux cleaned = -0.001245 Jy ! Component: 2750 - total flux cleaned = -0.00124491 Jy ! Component: 2800 - total flux cleaned = -0.00117718 Jy ! Component: 2850 - total flux cleaned = -0.00116016 Jy ! Component: 2900 - total flux cleaned = -0.00111002 Jy ! Component: 2950 - total flux cleaned = -0.0010271 Jy ! Component: 3000 - total flux cleaned = -0.000994144 Jy ! Component: 3050 - total flux cleaned = -0.000912525 Jy ! Component: 3100 - total flux cleaned = -0.000944886 Jy ! Component: 3150 - total flux cleaned = -0.000880384 Jy ! Component: 3200 - total flux cleaned = -0.000880215 Jy ! Component: 3250 - total flux cleaned = -0.000864297 Jy ! Component: 3300 - total flux cleaned = -0.000832645 Jy ! Component: 3350 - total flux cleaned = -0.000801286 Jy ! Component: 3400 - total flux cleaned = -0.000785508 Jy ! Component: 3450 - total flux cleaned = -0.000754454 Jy ! Component: 3500 - total flux cleaned = -0.000738948 Jy ! Component: 3550 - total flux cleaned = -0.000723544 Jy ! Component: 3600 - total flux cleaned = -0.000662413 Jy ! Component: 3650 - total flux cleaned = -0.000677673 Jy ! Component: 3700 - total flux cleaned = -0.00064751 Jy ! Component: 3750 - total flux cleaned = -0.000617567 Jy ! Component: 3800 - total flux cleaned = -0.00060262 Jy ! Component: 3850 - total flux cleaned = -0.000587787 Jy ! Component: 3900 - total flux cleaned = -0.000602517 Jy ! Component: 3950 - total flux cleaned = -0.000543868 Jy ! Component: 4000 - total flux cleaned = -0.000544013 Jy ! Component: 4050 - total flux cleaned = -0.000500611 Jy ! Total flux subtracted in 4096 components = -0.000500721 Jy ! Clean residual min=-0.000775 max=0.000911 Jy/beam ! Clean residual mean=-0.000002 rms=0.000253 Jy/beam ! Combined flux in latest and established models = 0.114026 Jy keep ! Adding 226 model components to the UV plane model. ! The established model now contains 295 components and 0.114026 Jy ![Exited script file: muppet] wmap "J0522-4020_S_2017_02_24_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.212 x 8.503 at -6.605 degrees (North through East) ! Clean map min=-0.0033686 max=0.11465 Jy/beam ! Writing clean map to FITS file: J0522-4020_S_2017_02_24_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.114653 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00024967 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.653284 0.653284 1.30657 2.61314 5.22627 10.4525 20.9051 41.8102 83.6203 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.114 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.212 x 8.503 at -6.605 degrees (North through East) ! Clean map min=-0.0033686 max=0.11465 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0522-4020_S_2017_02_24_pus_uvs.log closed on Sat May 4 11:19:07 2019