! Started logfile: J0520-0240_S_2017_10_09_pus_uvs.log on Sun May 12 13:04:51 2019 obs J0520-0240_S_2017_10_09_pus_uva.fits ! Reading UV FITS file: J0520-0240_S_2017_10_09_pus_uva.fits ! AN table 1: 145 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.570881 visibilities/baseline/integration-bin. ! Found source: J0520-0240 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 496 lines of history. ! ! Reading 11920 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0520-0240_S_2017_10_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 345 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 465 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 529 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1063 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.980330Jy sigma=0.008069 ! Fit after self-cal, rms=0.941820Jy sigma=0.007790 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.669 mas, bmaj=13.58 mas, bpa=-18.41 degrees ! Estimated noise=1344.56 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0420362 Jy ! Component: 100 - total flux cleaned = 0.0539157 Jy ! Total flux subtracted in 100 components = 0.0539157 Jy ! Clean residual min=-0.006376 max=0.009379 Jy/beam ! Clean residual mean=-0.000001 rms=0.002243 Jy/beam ! Combined flux in latest and established models = 0.0539157 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 0.0539157 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092728Jy sigma=0.000706 ! Fit after self-cal, rms=0.092038Jy sigma=0.000700 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.604 mas, bmaj=13.21 mas, bpa=-17.6 degrees ! Estimated noise=996.738 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0174861 Jy ! Component: 100 - total flux cleaned = 0.0296096 Jy ! Component: 150 - total flux cleaned = 0.0383634 Jy ! Component: 200 - total flux cleaned = 0.0447267 Jy ! Total flux subtracted in 200 components = 0.0447267 Jy ! Clean residual min=-0.005979 max=0.009007 Jy/beam ! Clean residual mean=0.000001 rms=0.002533 Jy/beam ! Combined flux in latest and established models = 0.0986424 Jy ! Performing phase self-cal ! Adding 63 model components to the UV plane model. ! The established model now contains 76 components and 0.0986424 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088044Jy sigma=0.000661 ! Fit after self-cal, rms=0.087471Jy sigma=0.000656 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.20 HN 1.11 KP 0.95 ! LA 0.90 MK 1.19 NL 1.43 OV 1.00* ! PT 0.82 ! ! ! Correcting IF 2. ! A total of 90 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.26 FD 1.14 HN 1.13 KP 0.93 ! LA 0.85 MK 1.23 NL 1.38 OV 1.00* ! PT 0.84 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.20 HN 0.88 KP 0.79 ! LA 0.68 MK 1.11 NL 1.49 OV 1.00* ! PT 0.82 ! ! ! Correcting IF 4. ! A total of 78 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.72 HN 0.80 KP 1.00* ! LA 1.00* MK 0.50 NL 1.00* OV 1.00* ! PT 1.41 ! ! ! Fit before self-cal, rms=0.087471Jy sigma=0.000656 ! Fit after self-cal, rms=0.094039Jy sigma=0.000640 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.718 mas, bmaj=13.53 mas, bpa=-17.08 degrees ! Estimated noise=1002.97 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00252146 Jy ! Component: 100 - total flux cleaned = 0.00260878 Jy ! Component: 150 - total flux cleaned = 0.0025451 Jy ! Component: 200 - total flux cleaned = 0.00244224 Jy ! Total flux subtracted in 200 components = 0.00244224 Jy ! Clean residual min=-0.004354 max=0.005621 Jy/beam ! Clean residual mean=-0.000008 rms=0.001312 Jy/beam ! Combined flux in latest and established models = 0.101085 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 92 components and 0.101085 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093867Jy sigma=0.000639 ! Fit after self-cal, rms=0.094755Jy sigma=0.000636 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094755Jy sigma=0.000636 ! Fit after self-cal, rms=0.096932Jy sigma=0.000631 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.679 mas, bmaj=13.44 mas, bpa=-17.14 degrees ! Estimated noise=999.665 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000719002 Jy ! Component: 100 - total flux cleaned = 0.000807331 Jy ! Component: 150 - total flux cleaned = 0.000690192 Jy ! Component: 200 - total flux cleaned = 0.000615838 Jy ! Total flux subtracted in 200 components = 0.000615838 Jy ! Clean residual min=-0.002678 max=0.003738 Jy/beam ! Clean residual mean=0.000003 rms=0.000846 Jy/beam ! Combined flux in latest and established models = 0.1017 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 98 components and 0.1017 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096899Jy sigma=0.000631 ! Fit after self-cal, rms=0.097192Jy sigma=0.000630 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (5, -37.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0034059 Jy ! Component: 100 - total flux cleaned = 0.00370686 Jy ! Component: 150 - total flux cleaned = 0.00387756 Jy ! Component: 200 - total flux cleaned = 0.00397728 Jy ! Total flux subtracted in 200 components = 0.00397728 Jy ! Clean residual min=-0.002432 max=0.002524 Jy/beam ! Clean residual mean=0.000002 rms=0.000691 Jy/beam ! Combined flux in latest and established models = 0.105678 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 124 components and 0.105678 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097031Jy sigma=0.000629 ! Fit after self-cal, rms=0.096784Jy sigma=0.000628 ! Inverting map ! Added new window around map position (-31.5, -24). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0021787 Jy ! Component: 100 - total flux cleaned = 0.00280811 Jy ! Component: 150 - total flux cleaned = 0.00305788 Jy ! Component: 200 - total flux cleaned = 0.00327139 Jy ! Total flux subtracted in 200 components = 0.00327139 Jy ! Clean residual min=-0.002371 max=0.001970 Jy/beam ! Clean residual mean=0.000001 rms=0.000615 Jy/beam ! Combined flux in latest and established models = 0.108949 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 148 components and 0.108949 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096638Jy sigma=0.000627 ! Fit after self-cal, rms=0.096430Jy sigma=0.000627 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096430Jy sigma=0.000627 ! Fit after self-cal, rms=0.094533Jy sigma=0.000627 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.669 mas, bmaj=13.52 mas, bpa=-17.19 degrees ! Estimated noise=984.751 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000640776 Jy ! Component: 100 - total flux cleaned = 0.0010715 Jy ! Component: 150 - total flux cleaned = 0.00137725 Jy ! Component: 200 - total flux cleaned = 0.00159861 Jy ! Total flux subtracted in 200 components = 0.00159861 Jy ! Clean residual min=-0.001951 max=0.001810 Jy/beam ! Clean residual mean=0.000002 rms=0.000550 Jy/beam ! Combined flux in latest and established models = 0.110548 Jy selfcal ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 171 components and 0.110548 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094455Jy sigma=0.000626 ! Fit after self-cal, rms=0.094336Jy sigma=0.000626 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000847383 Jy ! Component: 100 - total flux cleaned = 0.00110744 Jy ! Component: 150 - total flux cleaned = 0.00115023 Jy ! Component: 200 - total flux cleaned = 0.00102875 Jy ! Total flux subtracted in 200 components = 0.00102875 Jy ! Clean residual min=-0.001960 max=0.001834 Jy/beam ! Clean residual mean=0.000001 rms=0.000552 Jy/beam ! Combined flux in latest and established models = 0.111576 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 187 components and 0.111576 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094273Jy sigma=0.000625 ! Fit after self-cal, rms=0.094174Jy sigma=0.000625 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094174Jy sigma=0.000625 ! Fit after self-cal, rms=0.094225Jy sigma=0.000625 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.847 mas, bmaj=14.96 mas, bpa=-9.955 degrees ! Estimated noise=1126.8 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000506712 Jy ! Component: 100 - total flux cleaned = 0.000716963 Jy ! Component: 150 - total flux cleaned = 0.000846581 Jy ! Component: 200 - total flux cleaned = 0.000958611 Jy ! Total flux subtracted in 200 components = 0.000958611 Jy ! Clean residual min=-0.002435 max=0.002215 Jy/beam ! Clean residual mean=0.000002 rms=0.000629 Jy/beam ! Combined flux in latest and established models = 0.112535 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 214 components and 0.112535 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094186Jy sigma=0.000625 ! Fit after self-cal, rms=0.094102Jy sigma=0.000624 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00029789 Jy ! Component: 100 - total flux cleaned = 0.000480028 Jy ! Component: 150 - total flux cleaned = 0.000556898 Jy ! Component: 200 - total flux cleaned = 0.000592442 Jy ! Total flux subtracted in 200 components = 0.000592442 Jy ! Clean residual min=-0.002363 max=0.002349 Jy/beam ! Clean residual mean=0.000001 rms=0.000635 Jy/beam ! Combined flux in latest and established models = 0.113127 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 234 components and 0.113127 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094066Jy sigma=0.000624 ! Fit after self-cal, rms=0.093945Jy sigma=0.000624 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.674 mas, bmaj=13.61 mas, bpa=-17.22 degrees ! Estimated noise=981.533 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.674 x 13.61 at -17.22 degrees (North through East) ! Clean map min=-0.0048747 max=0.054588 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.715 mas, bmaj=13.58 mas, bpa=-17.93 degrees ! Estimated noise=1346.88 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0401666 Jy ! Component: 100 - total flux cleaned = 0.0567071 Jy ! Component: 150 - total flux cleaned = 0.0668845 Jy ! Component: 200 - total flux cleaned = 0.0722902 Jy ! Total flux subtracted in 200 components = 0.0722902 Jy ! Clean residual min=-0.005529 max=0.006450 Jy/beam ! Clean residual mean=0.000003 rms=0.001601 Jy/beam ! Combined flux in latest and established models = 0.0722902 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 41 model components to the UV plane model. ! The established model now contains 41 components and 0.0722902 Jy ! Inverting map and beam ! Estimated beam: bmin=3.674 mas, bmaj=13.61 mas, bpa=-17.22 degrees ! Estimated noise=981.533 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0108901 Jy ! Component: 100 - total flux cleaned = 0.0182498 Jy ! Component: 150 - total flux cleaned = 0.0220894 Jy ! Component: 200 - total flux cleaned = 0.0248415 Jy ! Total flux subtracted in 200 components = 0.0248415 Jy ! Clean residual min=-0.003810 max=0.004358 Jy/beam ! Clean residual mean=0.000001 rms=0.001170 Jy/beam ! Combined flux in latest and established models = 0.0971317 Jy ! Adding 54 model components to the UV plane model. ! The established model now contains 90 components and 0.0971318 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.847 mas, bmaj=14.96 mas, bpa=-9.955 degrees ! Estimated noise=1126.8 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00472139 Jy ! Component: 100 - total flux cleaned = 0.0069577 Jy ! Component: 150 - total flux cleaned = 0.00852406 Jy ! Component: 200 - total flux cleaned = 0.00928351 Jy ! Total flux subtracted in 200 components = 0.00928351 Jy ! Clean residual min=-0.002934 max=0.003346 Jy/beam ! Clean residual mean=0.000001 rms=0.000953 Jy/beam ! Combined flux in latest and established models = 0.106415 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000836413 Jy ! Component: 100 - total flux cleaned = 0.00139552 Jy ! Component: 150 - total flux cleaned = 0.00203196 Jy ! Component: 200 - total flux cleaned = 0.00253647 Jy ! Total flux subtracted in 200 components = 0.00253647 Jy ! Clean residual min=-0.002475 max=0.002534 Jy/beam ! Clean residual mean=0.000001 rms=0.000755 Jy/beam ! Combined flux in latest and established models = 0.108952 Jy ! Adding 75 model components to the UV plane model. ! The established model now contains 157 components and 0.108952 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.674 mas, bmaj=13.61 mas, bpa=-17.22 degrees ! Estimated noise=981.533 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00063811 Jy ! Component: 100 - total flux cleaned = 0.000701367 Jy ! Component: 150 - total flux cleaned = 0.000814433 Jy ! Component: 200 - total flux cleaned = 0.000970216 Jy ! Total flux subtracted in 200 components = 0.000970216 Jy ! Clean residual min=-0.002058 max=0.002326 Jy/beam ! Clean residual mean=0.000001 rms=0.000596 Jy/beam ! Combined flux in latest and established models = 0.109922 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 184 components and 0.109922 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094001Jy sigma=0.000625 ! Fit after self-cal, rms=0.093907Jy sigma=0.000624 wmodel J0520-0240_S_2017_10_09_pus_map.mod ! Writing 184 model components to file: J0520-0240_S_2017_10_09_pus_map.mod wobs J0520-0240_S_2017_10_09_pus_uvs.fits ! Writing UV FITS file: J0520-0240_S_2017_10_09_pus_uvs.fits wwins J0520-0240_S_2017_10_09_pus_map.win ! wwins: Wrote 3 windows to J0520-0240_S_2017_10_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000231332 Jy ! Component: 100 - total flux cleaned = -0.000551516 Jy ! Component: 150 - total flux cleaned = -0.000952308 Jy ! Component: 200 - total flux cleaned = -0.00114283 Jy ! Component: 250 - total flux cleaned = -0.00135562 Jy ! Component: 300 - total flux cleaned = -0.00153209 Jy ! Component: 350 - total flux cleaned = -0.00170306 Jy ! Component: 400 - total flux cleaned = -0.0017866 Jy ! Component: 450 - total flux cleaned = -0.0018145 Jy ! Component: 500 - total flux cleaned = -0.00189346 Jy ! Component: 550 - total flux cleaned = -0.00189263 Jy ! Component: 600 - total flux cleaned = -0.00189249 Jy ! Component: 650 - total flux cleaned = -0.00189187 Jy ! Component: 700 - total flux cleaned = -0.00186695 Jy ! Component: 750 - total flux cleaned = -0.00191358 Jy ! Component: 800 - total flux cleaned = -0.00205066 Jy ! Component: 850 - total flux cleaned = -0.00216248 Jy ! Component: 900 - total flux cleaned = -0.00216243 Jy ! Component: 950 - total flux cleaned = -0.00220601 Jy ! Component: 1000 - total flux cleaned = -0.00235462 Jy ! Component: 1050 - total flux cleaned = -0.00241739 Jy ! Component: 1100 - total flux cleaned = -0.00249938 Jy ! Component: 1150 - total flux cleaned = -0.00260004 Jy ! Component: 1200 - total flux cleaned = -0.00267937 Jy ! Component: 1250 - total flux cleaned = -0.00269882 Jy ! Component: 1300 - total flux cleaned = -0.00271826 Jy ! Component: 1350 - total flux cleaned = -0.00285073 Jy ! Component: 1400 - total flux cleaned = -0.00288744 Jy ! Component: 1450 - total flux cleaned = -0.0029057 Jy ! Component: 1500 - total flux cleaned = -0.00294187 Jy ! Component: 1550 - total flux cleaned = -0.00299534 Jy ! Component: 1600 - total flux cleaned = -0.0030479 Jy ! Component: 1650 - total flux cleaned = -0.00304801 Jy ! Component: 1700 - total flux cleaned = -0.00309961 Jy ! Component: 1750 - total flux cleaned = -0.00313355 Jy ! Component: 1800 - total flux cleaned = -0.00320065 Jy ! Component: 1850 - total flux cleaned = -0.00328354 Jy ! Component: 1900 - total flux cleaned = -0.00333262 Jy ! Component: 1950 - total flux cleaned = -0.00334885 Jy ! Component: 2000 - total flux cleaned = -0.00342912 Jy ! Component: 2050 - total flux cleaned = -0.00347678 Jy ! Component: 2100 - total flux cleaned = -0.00352396 Jy ! Component: 2150 - total flux cleaned = -0.00355529 Jy ! Component: 2200 - total flux cleaned = -0.00363246 Jy ! Component: 2250 - total flux cleaned = -0.00366309 Jy ! Component: 2300 - total flux cleaned = -0.00364799 Jy ! Component: 2350 - total flux cleaned = -0.00370837 Jy ! Component: 2400 - total flux cleaned = -0.00375317 Jy ! Component: 2450 - total flux cleaned = -0.00378266 Jy ! Component: 2500 - total flux cleaned = -0.00384121 Jy ! Component: 2550 - total flux cleaned = -0.00387019 Jy ! Component: 2600 - total flux cleaned = -0.00389897 Jy ! Component: 2650 - total flux cleaned = -0.00392763 Jy ! Component: 2700 - total flux cleaned = -0.00395588 Jy ! Component: 2750 - total flux cleaned = -0.0039978 Jy ! Component: 2800 - total flux cleaned = -0.00403941 Jy ! Component: 2850 - total flux cleaned = -0.00405313 Jy ! Component: 2900 - total flux cleaned = -0.00412147 Jy ! Component: 2950 - total flux cleaned = -0.00410793 Jy ! Component: 3000 - total flux cleaned = -0.00420215 Jy ! Component: 3050 - total flux cleaned = -0.00422878 Jy ! Component: 3100 - total flux cleaned = -0.00425527 Jy ! Component: 3150 - total flux cleaned = -0.00432106 Jy ! Component: 3200 - total flux cleaned = -0.00438637 Jy ! Component: 3250 - total flux cleaned = -0.00446407 Jy ! Component: 3300 - total flux cleaned = -0.00447694 Jy ! Component: 3350 - total flux cleaned = -0.00456637 Jy ! Component: 3400 - total flux cleaned = -0.00456635 Jy ! Component: 3450 - total flux cleaned = -0.00464209 Jy ! Component: 3500 - total flux cleaned = -0.00470464 Jy ! Component: 3550 - total flux cleaned = -0.00471712 Jy ! Component: 3600 - total flux cleaned = -0.00476671 Jy ! Component: 3650 - total flux cleaned = -0.00482821 Jy ! Component: 3700 - total flux cleaned = -0.0048405 Jy ! Component: 3750 - total flux cleaned = -0.00488921 Jy ! Component: 3800 - total flux cleaned = -0.00491338 Jy ! Component: 3850 - total flux cleaned = -0.00494949 Jy ! Component: 3900 - total flux cleaned = -0.0050093 Jy ! Component: 3950 - total flux cleaned = -0.00504501 Jy ! Component: 4000 - total flux cleaned = -0.00508054 Jy ! Component: 4050 - total flux cleaned = -0.00510418 Jy ! Total flux subtracted in 4096 components = -0.00515118 Jy ! Clean residual min=-0.000682 max=0.000686 Jy/beam ! Clean residual mean=-0.000001 rms=0.000228 Jy/beam ! Combined flux in latest and established models = 0.104771 Jy keep ! Adding 303 model components to the UV plane model. ! The established model now contains 487 components and 0.104771 Jy ![Exited script file: muppet] wmap "J0520-0240_S_2017_10_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.674 x 13.61 at -17.22 degrees (North through East) ! Clean map min=-0.0052587 max=0.053616 Jy/beam ! Writing clean map to FITS file: J0520-0240_S_2017_10_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0536157 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000220004 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.231 1.231 2.46201 4.92402 9.84803 19.6961 39.3921 78.7843 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.053 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.674 x 13.61 at -17.22 degrees (North through East) ! Clean map min=-0.0052587 max=0.053616 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0520-0240_S_2017_10_09_pus_uvs.log closed on Sun May 12 13:04:56 2019