! Started logfile: J0519-4546_S_2017_02_19_pus_uvs.log on Sat May 4 18:43:20 2019 obs J0519-4546_S_2017_02_19_pus_uva.fits ! Reading UV FITS file: J0519-4546_S_2017_02_19_pus_uva.fits ! AN table 1: 36 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.125926 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0519-4546 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 482 lines of history. ! ! Reading 816 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0519-4546_S_2017_02_19_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 221 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 221 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 225 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 360 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.683764Jy sigma=0.003533 ! Fit after self-cal, rms=0.606768Jy sigma=0.003225 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.816 mas, bmaj=39.91 mas, bpa=4.342 degrees ! Estimated noise=7626.82 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.327463 Jy ! Component: 100 - total flux cleaned = 0.501435 Jy ! Total flux subtracted in 100 components = 0.501435 Jy ! Clean residual min=-0.067634 max=0.090750 Jy/beam ! Clean residual mean=0.010377 rms=0.035503 Jy/beam ! Combined flux in latest and established models = 0.501435 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 0.501435 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.285159Jy sigma=0.001281 ! Fit after self-cal, rms=0.284424Jy sigma=0.001277 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.201 mas, bmaj=43.02 mas, bpa=5.732 degrees ! Estimated noise=5706.54 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.140406 Jy ! Component: 100 - total flux cleaned = 0.149021 Jy ! Component: 150 - total flux cleaned = 0.122626 Jy ! Component: 200 - total flux cleaned = 0.0887066 Jy ! Total flux subtracted in 200 components = 0.0887066 Jy ! Clean residual min=-0.031242 max=0.031115 Jy/beam ! Clean residual mean=0.002391 rms=0.015604 Jy/beam ! Combined flux in latest and established models = 0.590141 Jy ! Performing phase self-cal ! Adding 85 model components to the UV plane model. ! The established model now contains 97 components and 0.590141 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.168609Jy sigma=0.000761 ! Fit after self-cal, rms=0.167983Jy sigma=0.000759 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 15 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.90 HN 1.00* KP 1.16 ! LA 1.02 MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 0.94 ! ! ! Correcting IF 2. ! A total of 15 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.97 HN 1.00* KP 1.09 ! LA 0.97 MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.09 ! ! ! Correcting IF 3. ! A total of 15 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.95 HN 1.00* KP 0.98 ! LA 0.75 MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.03 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.167983Jy sigma=0.000759 ! Fit after self-cal, rms=0.121660Jy sigma=0.000630 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.213 mas, bmaj=44.81 mas, bpa=6.067 degrees ! Estimated noise=5732.5 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00794407 Jy ! Component: 100 - total flux cleaned = 0.00736236 Jy ! Component: 150 - total flux cleaned = 0.00571317 Jy ! Component: 200 - total flux cleaned = 0.00443617 Jy ! Total flux subtracted in 200 components = 0.00443617 Jy ! Clean residual min=-0.004028 max=0.004040 Jy/beam ! Clean residual mean=0.000448 rms=0.001678 Jy/beam ! Combined flux in latest and established models = 0.594578 Jy ! Performing phase self-cal ! Adding 76 model components to the UV plane model. ! The established model now contains 173 components and 0.594578 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120127Jy sigma=0.000622 ! Fit after self-cal, rms=0.120124Jy sigma=0.000622 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120124Jy sigma=0.000622 ! Fit after self-cal, rms=0.119084Jy sigma=0.000621 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.203 mas, bmaj=44.79 mas, bpa=6.072 degrees ! Estimated noise=5693.93 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00454584 Jy ! Component: 100 - total flux cleaned = 0.00418487 Jy ! Component: 150 - total flux cleaned = 0.00314039 Jy ! Component: 200 - total flux cleaned = 0.00232561 Jy ! Total flux subtracted in 200 components = 0.00232561 Jy ! Clean residual min=-0.002615 max=0.002580 Jy/beam ! Clean residual mean=0.000308 rms=0.001068 Jy/beam ! Combined flux in latest and established models = 0.596903 Jy selfcal ! Performing phase self-cal ! Adding 80 model components to the UV plane model. ! The established model now contains 240 components and 0.596903 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118562Jy sigma=0.000619 ! Fit after self-cal, rms=0.118514Jy sigma=0.000619 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00208644 Jy ! Component: 100 - total flux cleaned = 0.00377163 Jy ! Component: 150 - total flux cleaned = 0.00472947 Jy ! Component: 200 - total flux cleaned = 0.00551286 Jy ! Total flux subtracted in 200 components = 0.00551286 Jy ! Clean residual min=-0.001806 max=0.001807 Jy/beam ! Clean residual mean=0.000229 rms=0.000741 Jy/beam ! Combined flux in latest and established models = 0.602416 Jy ! Performing phase self-cal ! Adding 78 model components to the UV plane model. ! The established model now contains 315 components and 0.602416 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118278Jy sigma=0.000617 ! Fit after self-cal, rms=0.118258Jy sigma=0.000617 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118258Jy sigma=0.000617 ! Fit after self-cal, rms=0.117405Jy sigma=0.000615 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.199 mas, bmaj=45.01 mas, bpa=6.096 degrees ! Estimated noise=5687.35 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000543246 Jy ! Component: 100 - total flux cleaned = -0.000692306 Jy ! Component: 150 - total flux cleaned = -0.000952227 Jy ! Component: 200 - total flux cleaned = -0.00113755 Jy ! Total flux subtracted in 200 components = -0.00113755 Jy ! Clean residual min=-0.001013 max=0.000991 Jy/beam ! Clean residual mean=0.000003 rms=0.000367 Jy/beam ! Combined flux in latest and established models = 0.601278 Jy selfcal ! Performing phase self-cal ! Adding 64 model components to the UV plane model. ! The established model now contains 377 components and 0.601278 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117328Jy sigma=0.000615 ! Fit after self-cal, rms=0.117316Jy sigma=0.000615 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000391912 Jy ! Component: 100 - total flux cleaned = -0.000656405 Jy ! Component: 150 - total flux cleaned = -0.000707559 Jy ! Component: 200 - total flux cleaned = -0.000509073 Jy ! Total flux subtracted in 200 components = -0.000509073 Jy ! Clean residual min=-0.000818 max=0.000817 Jy/beam ! Clean residual mean=0.000012 rms=0.000301 Jy/beam ! Combined flux in latest and established models = 0.600769 Jy ! Performing phase self-cal ! Adding 56 model components to the UV plane model. ! The established model now contains 421 components and 0.600769 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117273Jy sigma=0.000615 ! Fit after self-cal, rms=0.117266Jy sigma=0.000615 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117266Jy sigma=0.000615 ! Fit after self-cal, rms=0.117004Jy sigma=0.000615 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.904 mas, bmaj=47.27 mas, bpa=2.228 degrees ! Estimated noise=7785.47 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000134842 Jy ! Component: 100 - total flux cleaned = 0.000186318 Jy ! Component: 150 - total flux cleaned = 3.77634e-05 Jy ! Component: 200 - total flux cleaned = -0.000170452 Jy ! Total flux subtracted in 200 components = -0.000170452 Jy ! Clean residual min=-0.000900 max=0.000893 Jy/beam ! Clean residual mean=-0.000058 rms=0.000321 Jy/beam ! Combined flux in latest and established models = 0.600598 Jy selfcal ! Performing phase self-cal ! Adding 76 model components to the UV plane model. ! The established model now contains 489 components and 0.600598 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116982Jy sigma=0.000614 ! Fit after self-cal, rms=0.116977Jy sigma=0.000614 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000145377 Jy ! Component: 100 - total flux cleaned = 0.000381473 Jy ! Component: 150 - total flux cleaned = 0.000440533 Jy ! Component: 200 - total flux cleaned = 0.000503484 Jy ! Total flux subtracted in 200 components = 0.000503484 Jy ! Clean residual min=-0.001082 max=0.001067 Jy/beam ! Clean residual mean=0.000069 rms=0.000417 Jy/beam ! Combined flux in latest and established models = 0.601102 Jy ! Performing phase self-cal ! Adding 89 model components to the UV plane model. ! The established model now contains 566 components and 0.601101 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116962Jy sigma=0.000614 ! Fit after self-cal, rms=0.116957Jy sigma=0.000614 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.198 mas, bmaj=45 mas, bpa=6.096 degrees ! Estimated noise=5677.75 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.198 x 45 at 6.096 degrees (North through East) ! Clean map min=-0.027686 max=0.42306 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.835 mas, bmaj=40.63 mas, bpa=4.493 degrees ! Estimated noise=7828.7 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.31276 Jy ! Component: 100 - total flux cleaned = 0.478334 Jy ! Component: 150 - total flux cleaned = 0.580568 Jy ! Component: 200 - total flux cleaned = 0.643978 Jy ! Total flux subtracted in 200 components = 0.643978 Jy ! Clean residual min=-0.032761 max=0.032830 Jy/beam ! Clean residual mean=0.004425 rms=0.014965 Jy/beam ! Combined flux in latest and established models = 0.643978 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 50 model components to the UV plane model. ! The established model now contains 50 components and 0.643978 Jy ! Inverting map and beam ! Estimated beam: bmin=3.198 mas, bmaj=45 mas, bpa=6.096 degrees ! Estimated noise=5677.75 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0159419 Jy ! Component: 100 - total flux cleaned = 0.00465605 Jy ! Component: 150 - total flux cleaned = -0.010831 Jy ! Component: 200 - total flux cleaned = -0.0266658 Jy ! Total flux subtracted in 200 components = -0.0266658 Jy ! Clean residual min=-0.016534 max=0.016406 Jy/beam ! Clean residual mean=0.000944 rms=0.006420 Jy/beam ! Combined flux in latest and established models = 0.617312 Jy ! Adding 98 model components to the UV plane model. ! The established model now contains 139 components and 0.617312 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.904 mas, bmaj=47.27 mas, bpa=2.228 degrees ! Estimated noise=7785.47 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00226655 Jy ! Component: 100 - total flux cleaned = 0.00121829 Jy ! Component: 150 - total flux cleaned = 0.00120799 Jy ! Component: 200 - total flux cleaned = -0.000350016 Jy ! Total flux subtracted in 200 components = -0.000350016 Jy ! Clean residual min=-0.008699 max=0.008910 Jy/beam ! Clean residual mean=0.000594 rms=0.003087 Jy/beam ! Combined flux in latest and established models = 0.616962 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00111574 Jy ! Component: 100 - total flux cleaned = 0.00307716 Jy ! Component: 150 - total flux cleaned = 0.00304252 Jy ! Component: 200 - total flux cleaned = 0.00212335 Jy ! Total flux subtracted in 200 components = 0.00212335 Jy ! Clean residual min=-0.016399 max=0.016468 Jy/beam ! Clean residual mean=-0.000350 rms=0.006921 Jy/beam ! Combined flux in latest and established models = 0.619085 Jy ! Adding 112 model components to the UV plane model. ! The established model now contains 248 components and 0.619086 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.198 mas, bmaj=45 mas, bpa=6.096 degrees ! Estimated noise=5677.75 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00710062 Jy ! Component: 100 - total flux cleaned = -0.00813035 Jy ! Component: 150 - total flux cleaned = -0.00967232 Jy ! Component: 200 - total flux cleaned = -0.00967361 Jy ! Total flux subtracted in 200 components = -0.00967361 Jy ! Clean residual min=-0.004835 max=0.004875 Jy/beam ! Clean residual mean=0.000263 rms=0.001276 Jy/beam ! Combined flux in latest and established models = 0.609412 Jy selfcal ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 282 components and 0.609412 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117718Jy sigma=0.000618 ! Fit after self-cal, rms=0.117584Jy sigma=0.000618 wmodel J0519-4546_S_2017_02_19_pus_map.mod ! Writing 282 model components to file: J0519-4546_S_2017_02_19_pus_map.mod wobs J0519-4546_S_2017_02_19_pus_uvs.fits ! Writing UV FITS file: J0519-4546_S_2017_02_19_pus_uvs.fits wwins J0519-4546_S_2017_02_19_pus_map.win ! wwins: No CLEAN windows to write. ! Error occured in command: wwins ![Exited script file: muppet] ! wmap "J0519-4546_S_2017_02_19_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.198 x 45 at 6.096 degrees (North through East) ! Clean map min=-0.017628 max=0.40143 Jy/beam ! Writing clean map to FITS file: J0519-4546_S_2017_02_19_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.401427 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000841736 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.629058 0.629058 1.25812 2.51623 5.03247 10.0649 20.1299 40.2597 80.5195 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0025 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.401 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.198 x 45 at 6.096 degrees (North through East) ! Clean map min=-0.017628 max=0.40143 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0519-4546_S_2017_02_19_pus_uvs.log closed on Sat May 4 18:43:24 2019