! Started logfile: J0519+0848_S_2017_08_12_pus_uvs.log on Fri May 10 14:52:36 2019 obs J0519+0848_S_2017_08_12_pus_uva.fits ! Reading UV FITS file: J0519+0848_S_2017_08_12_pus_uva.fits ! AN table 1: 83 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.91593 visibilities/baseline/integration-bin. ! Found source: J0519+0848 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 594 lines of history. ! ! Reading 13684 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0519+0848_S_2017_08_12_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 87 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 125 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 72 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 577 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.797416Jy sigma=0.006961 ! Fit after self-cal, rms=0.787635Jy sigma=0.006895 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.778 mas, bmaj=6.566 mas, bpa=-2.835 degrees ! Estimated noise=1123.4 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.164984 Jy ! Component: 100 - total flux cleaned = 0.202147 Jy ! Total flux subtracted in 100 components = 0.202147 Jy ! Clean residual min=-0.009360 max=0.013510 Jy/beam ! Clean residual mean=-0.000014 rms=0.002334 Jy/beam ! Combined flux in latest and established models = 0.202147 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.202147 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093112Jy sigma=0.000741 ! Fit after self-cal, rms=0.093113Jy sigma=0.000741 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.211 mas, bmaj=7.461 mas, bpa=-2.988 degrees ! Estimated noise=865.08 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0175417 Jy ! Component: 100 - total flux cleaned = 0.0261989 Jy ! Component: 150 - total flux cleaned = 0.0308822 Jy ! Component: 200 - total flux cleaned = 0.0335333 Jy ! Total flux subtracted in 200 components = 0.0335333 Jy ! Clean residual min=-0.005975 max=0.005799 Jy/beam ! Clean residual mean=0.000016 rms=0.001377 Jy/beam ! Combined flux in latest and established models = 0.23568 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 35 components and 0.23568 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089798Jy sigma=0.000713 ! Fit after self-cal, rms=0.089801Jy sigma=0.000713 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.12 HN 0.97 KP 1.09 ! LA 1.03 MK 1.04 NL 0.88 OV 1.03 ! PT 1.02 SC 0.96 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.00* HN 0.98 KP 1.03 ! LA 0.99 MK 1.02 NL 1.05 OV 1.07 ! PT 1.00 SC 1.04 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.73 HN 0.98 KP 1.01 ! LA 1.00 MK 1.06 NL 0.97 OV 0.97 ! PT 0.99 SC 1.02 ! ! ! Correcting IF 4. ! A total of 153 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.04 KP 1.00* ! LA 0.93 MK 1.07 NL 1.00* OV 1.00* ! PT 0.97 SC 1.00* ! ! ! Fit before self-cal, rms=0.089801Jy sigma=0.000713 ! Fit after self-cal, rms=0.086149Jy sigma=0.000687 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.272 mas, bmaj=7.488 mas, bpa=-2.39 degrees ! Estimated noise=870.175 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000409581 Jy ! Component: 100 - total flux cleaned = -0.000644728 Jy ! Component: 150 - total flux cleaned = -0.000699048 Jy ! Component: 200 - total flux cleaned = -0.000748226 Jy ! Total flux subtracted in 200 components = -0.000748226 Jy ! Clean residual min=-0.004060 max=0.004283 Jy/beam ! Clean residual mean=0.000022 rms=0.001041 Jy/beam ! Combined flux in latest and established models = 0.234932 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 48 components and 0.234932 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086120Jy sigma=0.000687 ! Fit after self-cal, rms=0.086131Jy sigma=0.000687 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086131Jy sigma=0.000687 ! Fit after self-cal, rms=0.086086Jy sigma=0.000680 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.273 mas, bmaj=7.501 mas, bpa=-2.5 degrees ! Estimated noise=869.953 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000563832 Jy ! Component: 100 - total flux cleaned = -0.000609332 Jy ! Component: 150 - total flux cleaned = -0.000644131 Jy ! Component: 200 - total flux cleaned = -0.000658358 Jy ! Total flux subtracted in 200 components = -0.000658358 Jy ! Clean residual min=-0.003462 max=0.003994 Jy/beam ! Clean residual mean=0.000006 rms=0.000966 Jy/beam ! Combined flux in latest and established models = 0.234273 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 54 components and 0.234274 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086073Jy sigma=0.000680 ! Fit after self-cal, rms=0.086080Jy sigma=0.000680 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.85971e-05 Jy ! Component: 100 - total flux cleaned = -0.000104964 Jy ! Component: 150 - total flux cleaned = -0.000117342 Jy ! Component: 200 - total flux cleaned = -0.00012768 Jy ! Total flux subtracted in 200 components = -0.00012768 Jy ! Clean residual min=-0.003420 max=0.003996 Jy/beam ! Clean residual mean=0.000006 rms=0.000962 Jy/beam ! Combined flux in latest and established models = 0.234146 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 58 components and 0.234146 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086075Jy sigma=0.000680 ! Fit after self-cal, rms=0.086072Jy sigma=0.000680 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086072Jy sigma=0.000680 ! Fit after self-cal, rms=0.085153Jy sigma=0.000664 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.278 mas, bmaj=7.506 mas, bpa=-2.507 degrees ! Estimated noise=869.933 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00023701 Jy ! Component: 100 - total flux cleaned = -0.000346418 Jy ! Component: 150 - total flux cleaned = -0.000384689 Jy ! Component: 200 - total flux cleaned = -0.000431444 Jy ! Total flux subtracted in 200 components = -0.000431444 Jy ! Clean residual min=-0.002709 max=0.003576 Jy/beam ! Clean residual mean=0.000007 rms=0.000658 Jy/beam ! Combined flux in latest and established models = 0.233714 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 61 components and 0.233714 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085144Jy sigma=0.000664 ! Fit after self-cal, rms=0.085175Jy sigma=0.000664 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (7.5, -46.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00352928 Jy ! Component: 100 - total flux cleaned = 0.00545554 Jy ! Component: 150 - total flux cleaned = 0.00683011 Jy ! Component: 200 - total flux cleaned = 0.00787326 Jy ! Total flux subtracted in 200 components = 0.00787326 Jy ! Clean residual min=-0.002273 max=0.002115 Jy/beam ! Clean residual mean=0.000005 rms=0.000551 Jy/beam ! Combined flux in latest and established models = 0.241588 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 83 components and 0.241588 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085029Jy sigma=0.000662 ! Fit after self-cal, rms=0.085018Jy sigma=0.000662 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085018Jy sigma=0.000662 ! Fit after self-cal, rms=0.084937Jy sigma=0.000662 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.153 mas, bmaj=11.87 mas, bpa=-5.95 degrees ! Estimated noise=1108.59 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00212242 Jy ! Component: 100 - total flux cleaned = 0.00316482 Jy ! Component: 150 - total flux cleaned = 0.00372936 Jy ! Component: 200 - total flux cleaned = 0.00411111 Jy ! Total flux subtracted in 200 components = 0.00411111 Jy ! Clean residual min=-0.002545 max=0.002272 Jy/beam ! Clean residual mean=0.000014 rms=0.000700 Jy/beam ! Combined flux in latest and established models = 0.245699 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 98 components and 0.245699 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084922Jy sigma=0.000662 ! Fit after self-cal, rms=0.084921Jy sigma=0.000662 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000506348 Jy ! Component: 100 - total flux cleaned = 0.000747239 Jy ! Component: 150 - total flux cleaned = 0.000884889 Jy ! Component: 200 - total flux cleaned = 0.000986943 Jy ! Total flux subtracted in 200 components = 0.000986943 Jy ! Clean residual min=-0.002452 max=0.002187 Jy/beam ! Clean residual mean=0.000013 rms=0.000684 Jy/beam ! Combined flux in latest and established models = 0.246686 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 104 components and 0.246686 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084920Jy sigma=0.000662 ! Fit after self-cal, rms=0.084919Jy sigma=0.000662 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.279 mas, bmaj=7.514 mas, bpa=-2.564 degrees ! Estimated noise=867.709 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.279 x 7.514 at -2.564 degrees (North through East) ! Clean map min=-0.0019317 max=0.21601 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.829 mas, bmaj=6.605 mas, bpa=-2.377 degrees ! Estimated noise=1146.06 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.165656 Jy ! Component: 100 - total flux cleaned = 0.202549 Jy ! Component: 150 - total flux cleaned = 0.216158 Jy ! Component: 200 - total flux cleaned = 0.22355 Jy ! Total flux subtracted in 200 components = 0.22355 Jy ! Clean residual min=-0.003167 max=0.003677 Jy/beam ! Clean residual mean=-0.000002 rms=0.000813 Jy/beam ! Combined flux in latest and established models = 0.22355 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 0.22355 Jy ! Inverting map and beam ! Estimated beam: bmin=3.279 mas, bmaj=7.514 mas, bpa=-2.564 degrees ! Estimated noise=867.709 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00512681 Jy ! Component: 100 - total flux cleaned = 0.00874959 Jy ! Component: 150 - total flux cleaned = 0.0114909 Jy ! Component: 200 - total flux cleaned = 0.0136955 Jy ! Total flux subtracted in 200 components = 0.0136955 Jy ! Clean residual min=-0.002457 max=0.002292 Jy/beam ! Clean residual mean=0.000005 rms=0.000602 Jy/beam ! Combined flux in latest and established models = 0.237246 Jy ! Adding 41 model components to the UV plane model. ! The established model now contains 57 components and 0.237246 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.153 mas, bmaj=11.87 mas, bpa=-5.95 degrees ! Estimated noise=1108.59 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00316156 Jy ! Component: 100 - total flux cleaned = 0.00537068 Jy ! Component: 150 - total flux cleaned = 0.00699466 Jy ! Component: 200 - total flux cleaned = 0.00756352 Jy ! Total flux subtracted in 200 components = 0.00756352 Jy ! Clean residual min=-0.002503 max=0.002408 Jy/beam ! Clean residual mean=0.000013 rms=0.000727 Jy/beam ! Combined flux in latest and established models = 0.244809 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000526042 Jy ! Component: 100 - total flux cleaned = 0.000899668 Jy ! Component: 150 - total flux cleaned = 0.00125702 Jy ! Component: 200 - total flux cleaned = 0.00156503 Jy ! Total flux subtracted in 200 components = 0.00156503 Jy ! Clean residual min=-0.002407 max=0.002265 Jy/beam ! Clean residual mean=0.000013 rms=0.000695 Jy/beam ! Combined flux in latest and established models = 0.246374 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 86 components and 0.246374 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.279 mas, bmaj=7.514 mas, bpa=-2.564 degrees ! Estimated noise=867.709 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000156705 Jy ! Component: 100 - total flux cleaned = 7.39001e-05 Jy ! Component: 150 - total flux cleaned = 7.30669e-05 Jy ! Component: 200 - total flux cleaned = 5.94257e-06 Jy ! Total flux subtracted in 200 components = 5.94257e-06 Jy ! Clean residual min=-0.002096 max=0.002072 Jy/beam ! Clean residual mean=0.000006 rms=0.000530 Jy/beam ! Combined flux in latest and established models = 0.24638 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 104 components and 0.24638 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084952Jy sigma=0.000662 ! Fit after self-cal, rms=0.084948Jy sigma=0.000662 wmodel J0519+0848_S_2017_08_12_pus_map.mod ! Writing 104 model components to file: J0519+0848_S_2017_08_12_pus_map.mod wobs J0519+0848_S_2017_08_12_pus_uvs.fits ! Writing UV FITS file: J0519+0848_S_2017_08_12_pus_uvs.fits wwins J0519+0848_S_2017_08_12_pus_map.win ! wwins: Wrote 2 windows to J0519+0848_S_2017_08_12_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 3.87046e-05 Jy ! Component: 100 - total flux cleaned = 0.00010997 Jy ! Component: 150 - total flux cleaned = 0.000351727 Jy ! Component: 200 - total flux cleaned = 0.000484555 Jy ! Component: 250 - total flux cleaned = 0.000645686 Jy ! Component: 300 - total flux cleaned = 0.000834002 Jy ! Component: 350 - total flux cleaned = 0.00104791 Jy ! Component: 400 - total flux cleaned = 0.00125588 Jy ! Component: 450 - total flux cleaned = 0.00134276 Jy ! Component: 500 - total flux cleaned = 0.00142817 Jy ! Component: 550 - total flux cleaned = 0.0014284 Jy ! Component: 600 - total flux cleaned = 0.00148311 Jy ! Component: 650 - total flux cleaned = 0.00156383 Jy ! Component: 700 - total flux cleaned = 0.00156365 Jy ! Component: 750 - total flux cleaned = 0.00158898 Jy ! Component: 800 - total flux cleaned = 0.00151207 Jy ! Component: 850 - total flux cleaned = 0.00136172 Jy ! Component: 900 - total flux cleaned = 0.00128844 Jy ! Component: 950 - total flux cleaned = 0.00128861 Jy ! Component: 1000 - total flux cleaned = 0.00121671 Jy ! Component: 1050 - total flux cleaned = 0.0011695 Jy ! Component: 1100 - total flux cleaned = 0.00114596 Jy ! Component: 1150 - total flux cleaned = 0.00110034 Jy ! Component: 1200 - total flux cleaned = 0.0011 Jy ! Component: 1250 - total flux cleaned = 0.00105529 Jy ! Component: 1300 - total flux cleaned = 0.00109929 Jy ! Component: 1350 - total flux cleaned = 0.00101208 Jy ! Component: 1400 - total flux cleaned = 0.00114061 Jy ! Component: 1450 - total flux cleaned = 0.00109794 Jy ! Component: 1500 - total flux cleaned = 0.00107671 Jy ! Component: 1550 - total flux cleaned = 0.00111841 Jy ! Component: 1600 - total flux cleaned = 0.00120077 Jy ! Component: 1650 - total flux cleaned = 0.00138253 Jy ! Component: 1700 - total flux cleaned = 0.00138201 Jy ! Component: 1750 - total flux cleaned = 0.00148143 Jy ! Component: 1800 - total flux cleaned = 0.00154055 Jy ! Component: 1850 - total flux cleaned = 0.00163806 Jy ! Component: 1900 - total flux cleaned = 0.0018115 Jy ! Component: 1950 - total flux cleaned = 0.00186868 Jy ! Component: 2000 - total flux cleaned = 0.00202027 Jy ! Component: 2050 - total flux cleaned = 0.00213268 Jy ! Component: 2100 - total flux cleaned = 0.0022813 Jy ! Component: 2150 - total flux cleaned = 0.0024284 Jy ! Component: 2200 - total flux cleaned = 0.00251982 Jy ! Component: 2250 - total flux cleaned = 0.00264666 Jy ! Component: 2300 - total flux cleaned = 0.00275429 Jy ! Component: 2350 - total flux cleaned = 0.00293213 Jy ! Component: 2400 - total flux cleaned = 0.00302013 Jy ! Component: 2450 - total flux cleaned = 0.00316028 Jy ! Component: 2500 - total flux cleaned = 0.00324695 Jy ! Component: 2550 - total flux cleaned = 0.0034017 Jy ! Component: 2600 - total flux cleaned = 0.00355534 Jy ! Component: 2650 - total flux cleaned = 0.00367397 Jy ! Component: 2700 - total flux cleaned = 0.00372423 Jy ! Component: 2750 - total flux cleaned = 0.00377421 Jy ! Component: 2800 - total flux cleaned = 0.00387372 Jy ! Component: 2850 - total flux cleaned = 0.00393952 Jy ! Component: 2900 - total flux cleaned = 0.00407025 Jy ! Component: 2950 - total flux cleaned = 0.0041351 Jy ! Component: 3000 - total flux cleaned = 0.0041833 Jy ! Component: 3050 - total flux cleaned = 0.00426309 Jy ! Component: 3100 - total flux cleaned = 0.00435811 Jy ! Component: 3150 - total flux cleaned = 0.0044209 Jy ! Component: 3200 - total flux cleaned = 0.00445197 Jy ! Component: 3250 - total flux cleaned = 0.00456065 Jy ! Component: 3300 - total flux cleaned = 0.00454527 Jy ! Component: 3350 - total flux cleaned = 0.00459132 Jy ! Component: 3400 - total flux cleaned = 0.00468252 Jy ! Component: 3450 - total flux cleaned = 0.0047732 Jy ! Component: 3500 - total flux cleaned = 0.00486338 Jy ! Component: 3550 - total flux cleaned = 0.00493785 Jy ! Component: 3600 - total flux cleaned = 0.00501165 Jy ! Component: 3650 - total flux cleaned = 0.00498214 Jy ! Component: 3700 - total flux cleaned = 0.00505521 Jy ! Component: 3750 - total flux cleaned = 0.00504063 Jy ! Component: 3800 - total flux cleaned = 0.00506944 Jy ! Component: 3850 - total flux cleaned = 0.00522722 Jy ! Component: 3900 - total flux cleaned = 0.00524147 Jy ! Component: 3950 - total flux cleaned = 0.00525573 Jy ! Component: 4000 - total flux cleaned = 0.00525582 Jy ! Component: 4050 - total flux cleaned = 0.00535383 Jy ! Total flux subtracted in 4096 components = 0.00543733 Jy ! Clean residual min=-0.000748 max=0.000816 Jy/beam ! Clean residual mean=0.000003 rms=0.000261 Jy/beam ! Combined flux in latest and established models = 0.251817 Jy keep ! Adding 300 model components to the UV plane model. ! The established model now contains 404 components and 0.251817 Jy ![Exited script file: muppet] wmap "J0519+0848_S_2017_08_12_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.279 x 7.514 at -2.564 degrees (North through East) ! Clean map min=-0.0014608 max=0.21606 Jy/beam ! Writing clean map to FITS file: J0519+0848_S_2017_08_12_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.216065 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000259498 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.360306 0.360306 0.720612 1.44122 2.88245 5.7649 11.5298 23.0596 46.1192 92.2384 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.216 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.279 x 7.514 at -2.564 degrees (North through East) ! Clean map min=-0.0014608 max=0.21606 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0519+0848_S_2017_08_12_pus_uvs.log closed on Fri May 10 14:52:41 2019