! Started logfile: J0518+2054_S_2017_04_28_pus_uvs.log on Thu May 2 16:17:27 2019 obs J0518+2054_S_2017_04_28_pus_uva.fits ! Reading UV FITS file: J0518+2054_S_2017_04_28_pus_uva.fits ! AN table 1: 8 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.683333 visibilities/baseline/integration-bin. ! Found source: J0518+2054 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 671 lines of history. ! ! Reading 984 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0518+2054_S_2017_04_28_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 14 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 14 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 14 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 37 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.753830Jy sigma=0.012427 ! Fit after self-cal, rms=0.750266Jy sigma=0.012324 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.065 mas, bmaj=8.84 mas, bpa=-3.137 degrees ! Estimated noise=2760.2 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.167714 Jy ! Component: 100 - total flux cleaned = 0.233554 Jy ! Total flux subtracted in 100 components = 0.233554 Jy ! Clean residual min=-0.029385 max=0.044522 Jy/beam ! Clean residual mean=-0.000062 rms=0.010254 Jy/beam ! Combined flux in latest and established models = 0.233554 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.233554 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.133685Jy sigma=0.001359 ! Fit after self-cal, rms=0.132892Jy sigma=0.001356 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.935 mas, bmaj=8.836 mas, bpa=-5.194 degrees ! Estimated noise=2583.66 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0307004 Jy ! Component: 100 - total flux cleaned = 0.0452057 Jy ! Component: 150 - total flux cleaned = 0.0548478 Jy ! Component: 200 - total flux cleaned = 0.0585236 Jy ! Total flux subtracted in 200 components = 0.0585236 Jy ! Clean residual min=-0.030242 max=0.031565 Jy/beam ! Clean residual mean=-0.000018 rms=0.008838 Jy/beam ! Combined flux in latest and established models = 0.292077 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 39 components and 0.292077 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121428Jy sigma=0.001429 ! Fit after self-cal, rms=0.121472Jy sigma=0.001429 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.54 FD 0.97 HN 0.94 KP 0.95 ! LA 1.15 MK 1.06 NL 0.97 OV 1.01 ! PT 1.03 SC 1.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.53 FD 0.86 HN 0.98 KP 0.98 ! LA 1.12 MK 0.99 NL 1.10 OV 1.03 ! PT 1.00 SC 1.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.59 FD 0.85 HN 0.92 KP 0.95 ! LA 1.04 MK 1.08 NL 1.03 OV 0.94 ! PT 1.01 SC 1.00* ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 12.06 FD 0.98 HN 0.93 KP 1.00* ! LA 1.21 MK 0.88 NL 1.00* OV 1.00* ! PT 1.05 SC 1.00* ! ! ! Fit before self-cal, rms=0.121472Jy sigma=0.001429 ! Fit after self-cal, rms=0.104866Jy sigma=0.000716 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.914 mas, bmaj=9.805 mas, bpa=-5.532 degrees ! Estimated noise=2742.29 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00616598 Jy ! Component: 100 - total flux cleaned = -0.00769084 Jy ! Component: 150 - total flux cleaned = -0.00887069 Jy ! Component: 200 - total flux cleaned = -0.00969558 Jy ! Total flux subtracted in 200 components = -0.00969558 Jy ! Clean residual min=-0.014109 max=0.010105 Jy/beam ! Clean residual mean=-0.000000 rms=0.003012 Jy/beam ! Combined flux in latest and established models = 0.282382 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 55 components and 0.282382 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104638Jy sigma=0.000700 ! Fit after self-cal, rms=0.102615Jy sigma=0.000691 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102615Jy sigma=0.000691 ! Fit after self-cal, rms=0.102947Jy sigma=0.000689 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.914 mas, bmaj=9.952 mas, bpa=-5.553 degrees ! Estimated noise=2768.51 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0023096 Jy ! Component: 100 - total flux cleaned = -0.00355293 Jy ! Component: 150 - total flux cleaned = -0.00434635 Jy ! Component: 200 - total flux cleaned = -0.00500127 Jy ! Total flux subtracted in 200 components = -0.00500127 Jy ! Clean residual min=-0.012632 max=0.009813 Jy/beam ! Clean residual mean=0.000005 rms=0.002766 Jy/beam ! Combined flux in latest and established models = 0.27738 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 64 components and 0.27738 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102970Jy sigma=0.000682 ! Fit after self-cal, rms=0.102962Jy sigma=0.000682 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000554937 Jy ! Component: 100 - total flux cleaned = -0.000796363 Jy ! Component: 150 - total flux cleaned = -0.000851965 Jy ! Component: 200 - total flux cleaned = -0.000904951 Jy ! Total flux subtracted in 200 components = -0.000904951 Jy ! Clean residual min=-0.012297 max=0.009757 Jy/beam ! Clean residual mean=0.000004 rms=0.002718 Jy/beam ! Combined flux in latest and established models = 0.276475 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 70 components and 0.276475 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102958Jy sigma=0.000680 ! Fit after self-cal, rms=0.102971Jy sigma=0.000680 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102971Jy sigma=0.000680 ! Fit after self-cal, rms=0.103903Jy sigma=0.000679 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.906 mas, bmaj=10.08 mas, bpa=-5.552 degrees ! Estimated noise=2794.18 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00134684 Jy ! Component: 100 - total flux cleaned = -0.00187411 Jy ! Component: 150 - total flux cleaned = -0.00244774 Jy ! Component: 200 - total flux cleaned = -0.00298516 Jy ! Total flux subtracted in 200 components = -0.00298516 Jy ! Clean residual min=-0.011674 max=0.009024 Jy/beam ! Clean residual mean=0.000006 rms=0.002540 Jy/beam ! Combined flux in latest and established models = 0.27349 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 72 components and 0.27349 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103931Jy sigma=0.000675 ! Fit after self-cal, rms=0.103943Jy sigma=0.000675 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00032589 Jy ! Component: 100 - total flux cleaned = -0.000420471 Jy ! Component: 150 - total flux cleaned = -0.00046653 Jy ! Component: 200 - total flux cleaned = -0.000556047 Jy ! Total flux subtracted in 200 components = -0.000556047 Jy ! Clean residual min=-0.011482 max=0.008972 Jy/beam ! Clean residual mean=0.000005 rms=0.002510 Jy/beam ! Combined flux in latest and established models = 0.272934 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 74 components and 0.272934 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103931Jy sigma=0.000674 ! Fit after self-cal, rms=0.103943Jy sigma=0.000674 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103943Jy sigma=0.000674 ! Fit after self-cal, rms=0.104688Jy sigma=0.000674 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.733 mas, bmaj=10.45 mas, bpa=-8.824 degrees ! Estimated noise=3162.2 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00116972 Jy ! Component: 100 - total flux cleaned = -0.00116824 Jy ! Component: 150 - total flux cleaned = -0.0011699 Jy ! Component: 200 - total flux cleaned = -0.00117098 Jy ! Total flux subtracted in 200 components = -0.00117098 Jy ! Clean residual min=-0.012145 max=0.010057 Jy/beam ! Clean residual mean=0.000014 rms=0.002888 Jy/beam ! Combined flux in latest and established models = 0.271763 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 78 components and 0.271763 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104723Jy sigma=0.000672 ! Fit after self-cal, rms=0.104701Jy sigma=0.000672 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.87567e-05 Jy ! Component: 100 - total flux cleaned = 3.92535e-05 Jy ! Component: 150 - total flux cleaned = 7.91167e-05 Jy ! Component: 200 - total flux cleaned = 0.000155663 Jy ! Total flux subtracted in 200 components = 0.000155663 Jy ! Clean residual min=-0.012074 max=0.009995 Jy/beam ! Clean residual mean=0.000014 rms=0.002872 Jy/beam ! Combined flux in latest and established models = 0.271919 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 85 components and 0.271919 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104692Jy sigma=0.000672 ! Fit after self-cal, rms=0.104686Jy sigma=0.000672 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.896 mas, bmaj=10.19 mas, bpa=-5.545 degrees ! Estimated noise=2811.92 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.896 x 10.19 at -5.545 degrees (North through East) ! Clean map min=-0.01113 max=0.22525 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.011 mas, bmaj=11.5 mas, bpa=-4.925 degrees ! Estimated noise=3227.03 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.185493 Jy ! Component: 100 - total flux cleaned = 0.234231 Jy ! Component: 150 - total flux cleaned = 0.254224 Jy ! Component: 200 - total flux cleaned = 0.263192 Jy ! Total flux subtracted in 200 components = 0.263192 Jy ! Clean residual min=-0.009789 max=0.009135 Jy/beam ! Clean residual mean=-0.000005 rms=0.002466 Jy/beam ! Combined flux in latest and established models = 0.263192 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 27 model components to the UV plane model. ! The established model now contains 27 components and 0.263192 Jy ! Inverting map and beam ! Estimated beam: bmin=4.896 mas, bmaj=10.19 mas, bpa=-5.545 degrees ! Estimated noise=2811.92 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0056 Jy ! Component: 100 - total flux cleaned = 0.00887261 Jy ! Component: 150 - total flux cleaned = 0.010983 Jy ! Component: 200 - total flux cleaned = 0.0121542 Jy ! Total flux subtracted in 200 components = 0.0121542 Jy ! Clean residual min=-0.010207 max=0.006974 Jy/beam ! Clean residual mean=0.000003 rms=0.002145 Jy/beam ! Combined flux in latest and established models = 0.275346 Jy ! Adding 22 model components to the UV plane model. ! The established model now contains 46 components and 0.275346 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.733 mas, bmaj=10.45 mas, bpa=-8.824 degrees ! Estimated noise=3162.2 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000532596 Jy ! Component: 100 - total flux cleaned = 0.000933882 Jy ! Component: 150 - total flux cleaned = 0.00120773 Jy ! Component: 200 - total flux cleaned = 0.00144378 Jy ! Total flux subtracted in 200 components = 0.00144378 Jy ! Clean residual min=-0.011448 max=0.008532 Jy/beam ! Clean residual mean=0.000010 rms=0.002705 Jy/beam ! Combined flux in latest and established models = 0.27679 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000206781 Jy ! Component: 100 - total flux cleaned = 0.000353681 Jy ! Component: 150 - total flux cleaned = 0.000517338 Jy ! Component: 200 - total flux cleaned = 0.000633964 Jy ! Total flux subtracted in 200 components = 0.000633964 Jy ! Clean residual min=-0.011411 max=0.008554 Jy/beam ! Clean residual mean=0.000011 rms=0.002691 Jy/beam ! Combined flux in latest and established models = 0.277424 Jy ! Adding 16 model components to the UV plane model. ! The established model now contains 58 components and 0.277424 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.896 mas, bmaj=10.19 mas, bpa=-5.545 degrees ! Estimated noise=2811.92 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000483427 Jy ! Component: 100 - total flux cleaned = 0.000292081 Jy ! Component: 150 - total flux cleaned = 0.000251293 Jy ! Component: 200 - total flux cleaned = 0.000250204 Jy ! Total flux subtracted in 200 components = 0.000250204 Jy ! Clean residual min=-0.010254 max=0.006862 Jy/beam ! Clean residual mean=0.000005 rms=0.002101 Jy/beam ! Combined flux in latest and established models = 0.277674 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 74 components and 0.277674 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104277Jy sigma=0.000666 ! Fit after self-cal, rms=0.104265Jy sigma=0.000666 wmodel J0518+2054_S_2017_04_28_pus_map.mod ! Writing 74 model components to file: J0518+2054_S_2017_04_28_pus_map.mod wobs J0518+2054_S_2017_04_28_pus_uvs.fits ! Writing UV FITS file: J0518+2054_S_2017_04_28_pus_uvs.fits wwins J0518+2054_S_2017_04_28_pus_map.win ! wwins: Wrote 1 windows to J0518+2054_S_2017_04_28_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00416409 Jy ! Component: 100 - total flux cleaned = -0.00613456 Jy ! Component: 150 - total flux cleaned = -0.00635228 Jy ! Component: 200 - total flux cleaned = -0.00655747 Jy ! Component: 250 - total flux cleaned = -0.00674483 Jy ! Component: 300 - total flux cleaned = -0.00656973 Jy ! Component: 350 - total flux cleaned = -0.00656865 Jy ! Component: 400 - total flux cleaned = -0.00672666 Jy ! Component: 450 - total flux cleaned = -0.0066514 Jy ! Component: 500 - total flux cleaned = -0.00672335 Jy ! Component: 550 - total flux cleaned = -0.00671985 Jy ! Component: 600 - total flux cleaned = -0.00644491 Jy ! Component: 650 - total flux cleaned = -0.00637798 Jy ! Component: 700 - total flux cleaned = -0.0063139 Jy ! Component: 750 - total flux cleaned = -0.00643676 Jy ! Component: 800 - total flux cleaned = -0.00643679 Jy ! Component: 850 - total flux cleaned = -0.0067269 Jy ! Component: 900 - total flux cleaned = -0.00683963 Jy ! Component: 950 - total flux cleaned = -0.00705987 Jy ! Component: 1000 - total flux cleaned = -0.00716767 Jy ! Component: 1050 - total flux cleaned = -0.00732757 Jy ! Component: 1100 - total flux cleaned = -0.00743174 Jy ! Component: 1150 - total flux cleaned = -0.00768976 Jy ! Component: 1200 - total flux cleaned = -0.00779181 Jy ! Component: 1250 - total flux cleaned = -0.00799378 Jy ! Component: 1300 - total flux cleaned = -0.00814293 Jy ! Component: 1350 - total flux cleaned = -0.00824138 Jy ! Component: 1400 - total flux cleaned = -0.00833931 Jy ! Component: 1450 - total flux cleaned = -0.00848509 Jy ! Component: 1500 - total flux cleaned = -0.00862876 Jy ! Component: 1550 - total flux cleaned = -0.00877193 Jy ! Component: 1600 - total flux cleaned = -0.00877247 Jy ! Component: 1650 - total flux cleaned = -0.00891381 Jy ! Component: 1700 - total flux cleaned = -0.00891407 Jy ! Component: 1750 - total flux cleaned = -0.00882143 Jy ! Component: 1800 - total flux cleaned = -0.00882142 Jy ! Component: 1850 - total flux cleaned = -0.00868346 Jy ! Component: 1900 - total flux cleaned = -0.00863772 Jy ! Component: 1950 - total flux cleaned = -0.00850056 Jy ! Component: 2000 - total flux cleaned = -0.00845488 Jy ! Component: 2050 - total flux cleaned = -0.00836411 Jy ! Component: 2100 - total flux cleaned = -0.00827337 Jy ! Component: 2150 - total flux cleaned = -0.00822767 Jy ! Component: 2200 - total flux cleaned = -0.0081821 Jy ! Component: 2250 - total flux cleaned = -0.00818199 Jy ! Component: 2300 - total flux cleaned = -0.00818236 Jy ! Component: 2350 - total flux cleaned = -0.00818259 Jy ! Component: 2400 - total flux cleaned = -0.0081827 Jy ! Component: 2450 - total flux cleaned = -0.00836698 Jy ! Component: 2500 - total flux cleaned = -0.00850647 Jy ! Component: 2550 - total flux cleaned = -0.00860031 Jy ! Component: 2600 - total flux cleaned = -0.00878813 Jy ! Component: 2650 - total flux cleaned = -0.00893051 Jy ! Component: 2700 - total flux cleaned = -0.00907471 Jy ! Component: 2750 - total flux cleaned = -0.00917166 Jy ! Component: 2800 - total flux cleaned = -0.00922069 Jy ! Component: 2850 - total flux cleaned = -0.00931907 Jy ! Component: 2900 - total flux cleaned = -0.00951859 Jy ! Component: 2950 - total flux cleaned = -0.00956934 Jy ! Component: 3000 - total flux cleaned = -0.00972331 Jy ! Component: 3050 - total flux cleaned = -0.00982763 Jy ! Component: 3100 - total flux cleaned = -0.00982777 Jy ! Component: 3150 - total flux cleaned = -0.00988152 Jy ! Component: 3200 - total flux cleaned = -0.00988176 Jy ! Component: 3250 - total flux cleaned = -0.00993847 Jy ! Component: 3300 - total flux cleaned = -0.00993899 Jy ! Component: 3350 - total flux cleaned = -0.00999901 Jy ! Component: 3400 - total flux cleaned = -0.0100002 Jy ! Component: 3450 - total flux cleaned = -0.0100003 Jy ! Component: 3500 - total flux cleaned = -0.0100635 Jy ! Component: 3550 - total flux cleaned = -0.010129 Jy ! Component: 3600 - total flux cleaned = -0.0101962 Jy ! Component: 3650 - total flux cleaned = -0.0101961 Jy ! Component: 3700 - total flux cleaned = -0.0102658 Jy ! Component: 3750 - total flux cleaned = -0.0102653 Jy ! Component: 3800 - total flux cleaned = -0.0104127 Jy ! Component: 3850 - total flux cleaned = -0.0104135 Jy ! Component: 3900 - total flux cleaned = -0.0104127 Jy ! Component: 3950 - total flux cleaned = -0.0104924 Jy ! Component: 4000 - total flux cleaned = -0.010493 Jy ! Component: 4050 - total flux cleaned = -0.0105764 Jy ! Total flux subtracted in 4096 components = -0.0105767 Jy ! Clean residual min=-0.005490 max=0.005589 Jy/beam ! Clean residual mean=0.000015 rms=0.001281 Jy/beam ! Combined flux in latest and established models = 0.267097 Jy keep ! Adding 245 model components to the UV plane model. ! The established model now contains 319 components and 0.267097 Jy ![Exited script file: muppet] wmap "J0518+2054_S_2017_04_28_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.896 x 10.19 at -5.545 degrees (North through East) ! Clean map min=-0.014394 max=0.22897 Jy/beam ! Writing clean map to FITS file: J0518+2054_S_2017_04_28_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.228974 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.0012749 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.67036 1.67036 3.34072 6.68145 13.3629 26.7258 53.4516 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0038 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.228 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.896 x 10.19 at -5.545 degrees (North through East) ! Clean map min=-0.014394 max=0.22897 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0518+2054_S_2017_04_28_pus_uvs.log closed on Thu May 2 16:17:31 2019