! Started logfile: J0515-4556_S_2017_02_19_pus_uvs.log on Sat May 4 18:43:10 2019 obs J0515-4556_S_2017_02_19_pus_uva.fits ! Reading UV FITS file: J0515-4556_S_2017_02_19_pus_uva.fits ! AN table 1: 72 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.20216 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0515-4556 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 482 lines of history. ! ! Reading 2620 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0515-4556_S_2017_02_19_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 384 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 384 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 389 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 638 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.502458Jy sigma=0.002796 ! Fit after self-cal, rms=0.470590Jy sigma=0.002649 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.305 mas, bmaj=7.561 mas, bpa=-5.209 degrees ! Estimated noise=3735.91 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.40804 Jy ! Component: 100 - total flux cleaned = 0.527823 Jy ! Total flux subtracted in 100 components = 0.527823 Jy ! Clean residual min=-0.034045 max=0.054986 Jy/beam ! Clean residual mean=0.001587 rms=0.010823 Jy/beam ! Combined flux in latest and established models = 0.527823 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.527823 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.186533Jy sigma=0.000895 ! Fit after self-cal, rms=0.186452Jy sigma=0.000894 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.655 mas, bmaj=8.643 mas, bpa=-3.181 degrees ! Estimated noise=2890.18 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0768398 Jy ! Component: 100 - total flux cleaned = 0.115062 Jy ! Component: 150 - total flux cleaned = 0.134511 Jy ! Component: 200 - total flux cleaned = 0.144498 Jy ! Total flux subtracted in 200 components = 0.144498 Jy ! Clean residual min=-0.016788 max=0.018899 Jy/beam ! Clean residual mean=0.000420 rms=0.005683 Jy/beam ! Combined flux in latest and established models = 0.672321 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 30 components and 0.672321 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.147618Jy sigma=0.000727 ! Fit after self-cal, rms=0.147449Jy sigma=0.000726 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 15 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.96 HN 1.00* KP 1.07 ! LA 1.03 MK 0.97 NL 1.00* OV 1.07 ! PT 1.00* SC 0.99 ! ! ! Correcting IF 2. ! A total of 15 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.01 HN 1.00* KP 1.04 ! LA 0.99 MK 1.00 NL 1.00* OV 1.11 ! PT 1.00* SC 1.04 ! ! ! Correcting IF 3. ! A total of 15 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.04 HN 1.00* KP 0.91 ! LA 0.76 MK 1.00 NL 1.00* OV 1.00 ! PT 1.00* SC 1.02 ! ! ! Correcting IF 4. ! A total of 66 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.07 HN 1.00* KP 1.00* ! LA 0.77 MK 1.01 NL 1.00* OV 0.98 ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.147449Jy sigma=0.000726 ! Fit after self-cal, rms=0.118681Jy sigma=0.000641 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.668 mas, bmaj=8.781 mas, bpa=-2.627 degrees ! Estimated noise=2951.55 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00144802 Jy ! Component: 100 - total flux cleaned = -0.00145273 Jy ! Component: 150 - total flux cleaned = -0.00140024 Jy ! Component: 200 - total flux cleaned = -0.00129682 Jy ! Total flux subtracted in 200 components = -0.00129682 Jy ! Clean residual min=-0.009524 max=0.014889 Jy/beam ! Clean residual mean=0.000137 rms=0.003449 Jy/beam ! Combined flux in latest and established models = 0.671024 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 38 components and 0.671024 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118591Jy sigma=0.000641 ! Fit after self-cal, rms=0.118505Jy sigma=0.000640 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118505Jy sigma=0.000640 ! Fit after self-cal, rms=0.118206Jy sigma=0.000638 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.674 mas, bmaj=8.79 mas, bpa=-2.605 degrees ! Estimated noise=2955.71 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00151143 Jy ! Component: 100 - total flux cleaned = -0.00156135 Jy ! Component: 150 - total flux cleaned = -0.00156117 Jy ! Component: 200 - total flux cleaned = -0.0015207 Jy ! Total flux subtracted in 200 components = -0.0015207 Jy ! Clean residual min=-0.008508 max=0.015308 Jy/beam ! Clean residual mean=0.000191 rms=0.003092 Jy/beam ! Combined flux in latest and established models = 0.669504 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 47 components and 0.669504 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118164Jy sigma=0.000638 ! Fit after self-cal, rms=0.118162Jy sigma=0.000638 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-12, -7). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0131929 Jy ! Component: 100 - total flux cleaned = 0.0181434 Jy ! Component: 150 - total flux cleaned = 0.0209947 Jy ! Component: 200 - total flux cleaned = 0.0217148 Jy ! Total flux subtracted in 200 components = 0.0217148 Jy ! Clean residual min=-0.007057 max=0.007363 Jy/beam ! Clean residual mean=0.000007 rms=0.002040 Jy/beam ! Combined flux in latest and established models = 0.691218 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 70 components and 0.691218 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116823Jy sigma=0.000630 ! Fit after self-cal, rms=0.116744Jy sigma=0.000630 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116744Jy sigma=0.000630 ! Fit after self-cal, rms=0.115786Jy sigma=0.000627 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.677 mas, bmaj=8.788 mas, bpa=-2.596 degrees ! Estimated noise=2947.95 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00417042 Jy ! Component: 100 - total flux cleaned = 0.00556364 Jy ! Component: 150 - total flux cleaned = 0.00585066 Jy ! Component: 200 - total flux cleaned = 0.00601838 Jy ! Total flux subtracted in 200 components = 0.00601838 Jy ! Clean residual min=-0.004241 max=0.004659 Jy/beam ! Clean residual mean=0.000013 rms=0.001194 Jy/beam ! Combined flux in latest and established models = 0.697237 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 90 components and 0.697237 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115643Jy sigma=0.000626 ! Fit after self-cal, rms=0.115634Jy sigma=0.000626 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0013728 Jy ! Component: 100 - total flux cleaned = 0.00172853 Jy ! Component: 150 - total flux cleaned = 0.0018648 Jy ! Component: 200 - total flux cleaned = 0.00194023 Jy ! Total flux subtracted in 200 components = 0.00194023 Jy ! Clean residual min=-0.003995 max=0.004377 Jy/beam ! Clean residual mean=-0.000002 rms=0.001150 Jy/beam ! Combined flux in latest and established models = 0.699177 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 109 components and 0.699177 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115614Jy sigma=0.000626 ! Fit after self-cal, rms=0.115613Jy sigma=0.000626 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115613Jy sigma=0.000626 ! Fit after self-cal, rms=0.115536Jy sigma=0.000626 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.704 mas, bmaj=30.01 mas, bpa=-1.77 degrees ! Estimated noise=4326.88 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00164492 Jy ! Component: 100 - total flux cleaned = 0.00164012 Jy ! Component: 150 - total flux cleaned = 0.00163844 Jy ! Component: 200 - total flux cleaned = 0.00168363 Jy ! Total flux subtracted in 200 components = 0.00168363 Jy ! Clean residual min=-0.004355 max=0.004259 Jy/beam ! Clean residual mean=0.000046 rms=0.001665 Jy/beam ! Combined flux in latest and established models = 0.700861 Jy selfcal ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 113 components and 0.700861 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115538Jy sigma=0.000626 ! Fit after self-cal, rms=0.115538Jy sigma=0.000626 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000229313 Jy ! Component: 100 - total flux cleaned = 0.000188764 Jy ! Component: 150 - total flux cleaned = 0.000130551 Jy ! Component: 200 - total flux cleaned = 0.000128631 Jy ! Total flux subtracted in 200 components = 0.000128631 Jy ! Clean residual min=-0.004342 max=0.004325 Jy/beam ! Clean residual mean=0.000045 rms=0.001640 Jy/beam ! Combined flux in latest and established models = 0.700989 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 118 components and 0.70099 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115546Jy sigma=0.000626 ! Fit after self-cal, rms=0.115545Jy sigma=0.000626 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.678 mas, bmaj=8.789 mas, bpa=-2.593 degrees ! Estimated noise=2945.96 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.678 x 8.789 at -2.593 degrees (North through East) ! Clean map min=-0.0037499 max=0.54991 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115545Jy sigma=0.000626 ! Fit after self-cal, rms=0.099157Jy sigma=0.000522 ! Inverting map and beam ! Estimated beam: bmin=2.678 mas, bmaj=8.792 mas, bpa=-2.572 degrees ! Estimated noise=2945.41 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000173277 Jy ! Component: 100 - total flux cleaned = 0.000189642 Jy ! Component: 150 - total flux cleaned = 0.000134455 Jy ! Component: 200 - total flux cleaned = 0.000133984 Jy ! Total flux subtracted in 200 components = 0.000133984 Jy ! Clean residual min=-0.003594 max=0.004169 Jy/beam ! Clean residual mean=0.000054 rms=0.001104 Jy/beam ! Combined flux in latest and established models = 0.701124 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 133 components and 0.701123 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099127Jy sigma=0.000522 ! Fit after self-cal, rms=0.099129Jy sigma=0.000522 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000375255 Jy ! Component: 100 - total flux cleaned = 0.000314797 Jy ! Component: 150 - total flux cleaned = 0.0002419 Jy ! Component: 200 - total flux cleaned = 0.000210173 Jy ! Total flux subtracted in 200 components = 0.000210173 Jy ! Clean residual min=-0.003598 max=0.004246 Jy/beam ! Clean residual mean=0.000052 rms=0.001096 Jy/beam ! Combined flux in latest and established models = 0.701334 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 141 components and 0.701334 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099118Jy sigma=0.000522 ! Fit after self-cal, rms=0.099120Jy sigma=0.000522 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099120Jy sigma=0.000522 ! Fit after self-cal, rms=0.099139Jy sigma=0.000522 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.323 mas, bmaj=7.585 mas, bpa=-5.277 degrees ! Estimated noise=4151.91 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.404928 Jy ! Component: 100 - total flux cleaned = 0.521549 Jy ! Component: 150 - total flux cleaned = 0.58078 Jy ! Component: 200 - total flux cleaned = 0.61576 Jy ! Total flux subtracted in 200 components = 0.61576 Jy ! Clean residual min=-0.018124 max=0.020784 Jy/beam ! Clean residual mean=0.000739 rms=0.004547 Jy/beam ! Combined flux in latest and established models = 0.61576 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 0.61576 Jy ! Inverting map and beam ! Estimated beam: bmin=2.679 mas, bmaj=8.792 mas, bpa=-2.573 degrees ! Estimated noise=2945.77 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, -17). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0282811 Jy ! Component: 100 - total flux cleaned = 0.0452327 Jy ! Component: 150 - total flux cleaned = 0.0563279 Jy ! Component: 200 - total flux cleaned = 0.0640588 Jy ! Total flux subtracted in 200 components = 0.0640588 Jy ! Clean residual min=-0.006051 max=0.006734 Jy/beam ! Clean residual mean=0.000227 rms=0.001830 Jy/beam ! Combined flux in latest and established models = 0.679819 Jy ! Adding 41 model components to the UV plane model. ! The established model now contains 56 components and 0.679819 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.7 mas, bmaj=30.01 mas, bpa=-1.757 degrees ! Estimated noise=4326.79 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0095927 Jy ! Component: 100 - total flux cleaned = 0.015015 Jy ! Component: 150 - total flux cleaned = 0.0181861 Jy ! Component: 200 - total flux cleaned = 0.0194233 Jy ! Total flux subtracted in 200 components = 0.0194233 Jy ! Clean residual min=-0.004807 max=0.004536 Jy/beam ! Clean residual mean=0.000172 rms=0.001709 Jy/beam ! Combined flux in latest and established models = 0.699242 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000439562 Jy ! Component: 100 - total flux cleaned = 0.000756503 Jy ! Component: 150 - total flux cleaned = 0.00102935 Jy ! Component: 200 - total flux cleaned = 0.00126304 Jy ! Total flux subtracted in 200 components = 0.00126304 Jy ! Clean residual min=-0.004190 max=0.004210 Jy/beam ! Clean residual mean=0.000147 rms=0.001547 Jy/beam ! Combined flux in latest and established models = 0.700505 Jy ! Adding 32 model components to the UV plane model. ! The established model now contains 86 components and 0.700505 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.679 mas, bmaj=8.792 mas, bpa=-2.573 degrees ! Estimated noise=2945.77 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000577418 Jy ! Component: 100 - total flux cleaned = -0.000234718 Jy ! Component: 150 - total flux cleaned = -0.000143475 Jy ! Component: 200 - total flux cleaned = -0.000144241 Jy ! Total flux subtracted in 200 components = -0.000144241 Jy ! Clean residual min=-0.004218 max=0.004602 Jy/beam ! Clean residual mean=0.000062 rms=0.001175 Jy/beam ! Combined flux in latest and established models = 0.700361 Jy selfcal ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 113 components and 0.700361 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099264Jy sigma=0.000523 ! Fit after self-cal, rms=0.099260Jy sigma=0.000522 wmodel J0515-4556_S_2017_02_19_pus_map.mod ! Writing 113 model components to file: J0515-4556_S_2017_02_19_pus_map.mod wobs J0515-4556_S_2017_02_19_pus_uvs.fits ! Writing UV FITS file: J0515-4556_S_2017_02_19_pus_uvs.fits wwins J0515-4556_S_2017_02_19_pus_map.win ! wwins: Wrote 3 windows to J0515-4556_S_2017_02_19_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00188872 Jy ! Component: 100 - total flux cleaned = 0.00299559 Jy ! Component: 150 - total flux cleaned = 0.00413037 Jy ! Component: 200 - total flux cleaned = 0.00530853 Jy ! Component: 250 - total flux cleaned = 0.00606255 Jy ! Component: 300 - total flux cleaned = 0.00666509 Jy ! Component: 350 - total flux cleaned = 0.00713105 Jy ! Component: 400 - total flux cleaned = 0.00757257 Jy ! Component: 450 - total flux cleaned = 0.00766895 Jy ! Component: 500 - total flux cleaned = 0.00775889 Jy ! Component: 550 - total flux cleaned = 0.00775833 Jy ! Component: 600 - total flux cleaned = 0.00788133 Jy ! Component: 650 - total flux cleaned = 0.00780004 Jy ! Component: 700 - total flux cleaned = 0.00772346 Jy ! Component: 750 - total flux cleaned = 0.00764753 Jy ! Component: 800 - total flux cleaned = 0.00757575 Jy ! Component: 850 - total flux cleaned = 0.00754126 Jy ! Component: 900 - total flux cleaned = 0.00747253 Jy ! Component: 950 - total flux cleaned = 0.007372 Jy ! Component: 1000 - total flux cleaned = 0.007175 Jy ! Component: 1050 - total flux cleaned = 0.00711017 Jy ! Component: 1100 - total flux cleaned = 0.00695062 Jy ! Component: 1150 - total flux cleaned = 0.00688786 Jy ! Component: 1200 - total flux cleaned = 0.00679507 Jy ! Component: 1250 - total flux cleaned = 0.00676481 Jy ! Component: 1300 - total flux cleaned = 0.00676483 Jy ! Component: 1350 - total flux cleaned = 0.00673486 Jy ! Component: 1400 - total flux cleaned = 0.00661822 Jy ! Component: 1450 - total flux cleaned = 0.00656057 Jy ! Component: 1500 - total flux cleaned = 0.00650343 Jy ! Component: 1550 - total flux cleaned = 0.00647535 Jy ! Component: 1600 - total flux cleaned = 0.00642008 Jy ! Component: 1650 - total flux cleaned = 0.00658591 Jy ! Component: 1700 - total flux cleaned = 0.00658543 Jy ! Component: 1750 - total flux cleaned = 0.00663973 Jy ! Component: 1800 - total flux cleaned = 0.00666653 Jy ! Component: 1850 - total flux cleaned = 0.00672003 Jy ! Component: 1900 - total flux cleaned = 0.00677296 Jy ! Component: 1950 - total flux cleaned = 0.00692979 Jy ! Component: 2000 - total flux cleaned = 0.00700706 Jy ! Component: 2050 - total flux cleaned = 0.00698115 Jy ! Component: 2100 - total flux cleaned = 0.00690472 Jy ! Component: 2150 - total flux cleaned = 0.00682854 Jy ! Component: 2200 - total flux cleaned = 0.00670182 Jy ! Component: 2250 - total flux cleaned = 0.00660051 Jy ! Component: 2300 - total flux cleaned = 0.00644904 Jy ! Component: 2350 - total flux cleaned = 0.00627198 Jy ! Component: 2400 - total flux cleaned = 0.00606904 Jy ! Component: 2450 - total flux cleaned = 0.00583981 Jy ! Component: 2500 - total flux cleaned = 0.00555821 Jy ! Component: 2550 - total flux cleaned = 0.00535215 Jy ! Component: 2600 - total flux cleaned = 0.00514461 Jy ! Component: 2650 - total flux cleaned = 0.00490927 Jy ! Component: 2700 - total flux cleaned = 0.00467181 Jy ! Component: 2750 - total flux cleaned = 0.00440563 Jy ! Component: 2800 - total flux cleaned = 0.00413726 Jy ! Component: 2850 - total flux cleaned = 0.00389369 Jy ! Component: 2900 - total flux cleaned = 0.00364801 Jy ! Component: 2950 - total flux cleaned = 0.00339948 Jy ! Component: 3000 - total flux cleaned = 0.00314887 Jy ! Component: 3050 - total flux cleaned = 0.00292376 Jy ! Component: 3100 - total flux cleaned = 0.00269598 Jy ! Component: 3150 - total flux cleaned = 0.00249437 Jy ! Component: 3200 - total flux cleaned = 0.00226083 Jy ! Component: 3250 - total flux cleaned = 0.00202419 Jy ! Component: 3300 - total flux cleaned = 0.00181382 Jy ! Component: 3350 - total flux cleaned = 0.00160076 Jy ! Component: 3400 - total flux cleaned = 0.00138442 Jy ! Component: 3450 - total flux cleaned = 0.00113368 Jy ! Component: 3500 - total flux cleaned = 0.000910756 Jy ! Component: 3550 - total flux cleaned = 0.00065248 Jy ! Component: 3600 - total flux cleaned = 0.000422544 Jy ! Component: 3650 - total flux cleaned = 0.000189582 Jy ! Component: 3700 - total flux cleaned = -1.26758e-05 Jy ! Component: 3750 - total flux cleaned = -0.00028634 Jy ! Component: 3800 - total flux cleaned = -0.000495264 Jy ! Component: 3850 - total flux cleaned = -0.000778081 Jy ! Component: 3900 - total flux cleaned = -0.000957764 Jy ! Component: 3950 - total flux cleaned = -0.00121275 Jy ! Component: 4000 - total flux cleaned = -0.00143456 Jy ! Component: 4050 - total flux cleaned = -0.00169776 Jy ! Total flux subtracted in 4096 components = -0.00192709 Jy ! Clean residual min=-0.002302 max=0.002125 Jy/beam ! Clean residual mean=-0.000034 rms=0.000700 Jy/beam ! Combined flux in latest and established models = 0.698434 Jy keep ! Adding 221 model components to the UV plane model. ! The established model now contains 334 components and 0.698434 Jy ![Exited script file: muppet] wmap "J0515-4556_S_2017_02_19_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.679 x 8.792 at -2.573 degrees (North through East) ! Clean map min=-0.0037182 max=0.54189 Jy/beam ! Writing clean map to FITS file: J0515-4556_S_2017_02_19_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.541893 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000723335 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.400449 0.400449 0.800898 1.6018 3.20359 6.40718 12.8144 25.6287 51.2575 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0021 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.541 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.679 x 8.792 at -2.573 degrees (North through East) ! Clean map min=-0.0037182 max=0.54189 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0515-4556_S_2017_02_19_pus_uvs.log closed on Sat May 4 18:43:15 2019