! Started logfile: J0513-0032_S_2017_05_01_pus_uvs.log on Wed May 1 18:27:49 2019 obs J0513-0032_S_2017_05_01_pus_uva.fits ! Reading UV FITS file: J0513-0032_S_2017_05_01_pus_uva.fits ! AN table 1: 142 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.906886 visibilities/baseline/integration-bin. ! Found source: J0513-0032 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 788 lines of history. ! ! Reading 23180 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0513-0032_S_2017_05_01_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 69 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 69 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 69 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 674 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.915033Jy sigma=0.007033 ! Fit after self-cal, rms=0.902917Jy sigma=0.006943 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.818 mas, bmaj=6.946 mas, bpa=-1.348 degrees ! Estimated noise=1005.89 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0705449 Jy ! Component: 100 - total flux cleaned = 0.0998715 Jy ! Total flux subtracted in 100 components = 0.0998715 Jy ! Clean residual min=-0.008841 max=0.033576 Jy/beam ! Clean residual mean=0.000071 rms=0.002686 Jy/beam ! Combined flux in latest and established models = 0.0998715 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.0998715 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109427Jy sigma=0.000823 ! Fit after self-cal, rms=0.109076Jy sigma=0.000821 ! Inverting map ! Added new window around map position (-5.5, -3). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0295747 Jy ! Component: 100 - total flux cleaned = 0.0440522 Jy ! Total flux subtracted in 100 components = 0.0440522 Jy ! Clean residual min=-0.006173 max=0.017205 Jy/beam ! Clean residual mean=0.000035 rms=0.001649 Jy/beam ! Combined flux in latest and established models = 0.143924 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 32 components and 0.143924 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098831Jy sigma=0.000736 ! Fit after self-cal, rms=0.096590Jy sigma=0.000719 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0176846 Jy ! Component: 100 - total flux cleaned = 0.0261601 Jy ! Total flux subtracted in 100 components = 0.0261601 Jy ! Clean residual min=-0.004138 max=0.006499 Jy/beam ! Clean residual mean=0.000014 rms=0.001053 Jy/beam ! Combined flux in latest and established models = 0.170084 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 41 components and 0.170084 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092766Jy sigma=0.000688 ! Fit after self-cal, rms=0.092164Jy sigma=0.000683 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00804684 Jy ! Component: 100 - total flux cleaned = 0.011908 Jy ! Total flux subtracted in 100 components = 0.011908 Jy ! Clean residual min=-0.003781 max=0.003857 Jy/beam ! Clean residual mean=0.000004 rms=0.000850 Jy/beam ! Combined flux in latest and established models = 0.181992 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 58 components and 0.181992 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091306Jy sigma=0.000677 ! Fit after self-cal, rms=0.091194Jy sigma=0.000676 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.458 mas, bmaj=8.03 mas, bpa=0.3154 degrees ! Estimated noise=670.605 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00466061 Jy ! Component: 100 - total flux cleaned = 0.00511739 Jy ! Component: 150 - total flux cleaned = 0.00555255 Jy ! Component: 200 - total flux cleaned = 0.0058944 Jy ! Total flux subtracted in 200 components = 0.0058944 Jy ! Clean residual min=-0.002886 max=0.002748 Jy/beam ! Clean residual mean=-0.000000 rms=0.000707 Jy/beam ! Combined flux in latest and established models = 0.187886 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 85 components and 0.187886 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090879Jy sigma=0.000674 ! Fit after self-cal, rms=0.090826Jy sigma=0.000673 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.90 HN 1.03 KP 1.05 ! LA 1.02 MK 1.05 NL 0.96 OV 1.01 ! PT 1.03 SC 0.95 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.94 HN 1.07 KP 0.98 ! LA 0.96 MK 1.03 NL 1.01 OV 1.03 ! PT 1.00 SC 1.02 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.97 HN 1.04 KP 1.01 ! LA 1.01 MK 1.11 NL 1.04 OV 0.96 ! PT 1.01 SC 1.00 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.01 HN 0.88 KP 1.00* ! LA 0.97 MK 0.90 NL 1.00* OV 1.00* ! PT 1.04 SC 1.00* ! ! ! Fit before self-cal, rms=0.090826Jy sigma=0.000673 ! Fit after self-cal, rms=0.090784Jy sigma=0.000671 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.485 mas, bmaj=8.058 mas, bpa=0.9161 degrees ! Estimated noise=673.438 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000377657 Jy ! Component: 100 - total flux cleaned = 0.000316934 Jy ! Component: 150 - total flux cleaned = 0.000180407 Jy ! Component: 200 - total flux cleaned = 0.000108152 Jy ! Total flux subtracted in 200 components = 0.000108152 Jy ! Clean residual min=-0.002236 max=0.002630 Jy/beam ! Clean residual mean=-0.000006 rms=0.000602 Jy/beam ! Combined flux in latest and established models = 0.187994 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 106 components and 0.187994 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090706Jy sigma=0.000670 ! Fit after self-cal, rms=0.090689Jy sigma=0.000670 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090689Jy sigma=0.000670 ! Fit after self-cal, rms=0.090589Jy sigma=0.000668 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.489 mas, bmaj=8.065 mas, bpa=0.9873 degrees ! Estimated noise=672.313 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000291428 Jy ! Component: 100 - total flux cleaned = 0.000130217 Jy ! Component: 150 - total flux cleaned = -1.77816e-06 Jy ! Component: 200 - total flux cleaned = -2.93271e-05 Jy ! Total flux subtracted in 200 components = -2.93271e-05 Jy ! Clean residual min=-0.001735 max=0.001711 Jy/beam ! Clean residual mean=0.000003 rms=0.000460 Jy/beam ! Combined flux in latest and established models = 0.187965 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 115 components and 0.187965 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090555Jy sigma=0.000668 ! Fit after self-cal, rms=0.090557Jy sigma=0.000668 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000158321 Jy ! Component: 100 - total flux cleaned = 0.000103055 Jy ! Component: 150 - total flux cleaned = 0.000102381 Jy ! Component: 200 - total flux cleaned = 0.000102441 Jy ! Total flux subtracted in 200 components = 0.000102441 Jy ! Clean residual min=-0.001668 max=0.001706 Jy/beam ! Clean residual mean=0.000002 rms=0.000454 Jy/beam ! Combined flux in latest and established models = 0.188067 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 125 components and 0.188067 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090541Jy sigma=0.000668 ! Fit after self-cal, rms=0.090538Jy sigma=0.000668 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090538Jy sigma=0.000668 ! Fit after self-cal, rms=0.090452Jy sigma=0.000668 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.49 mas, bmaj=8.066 mas, bpa=1.002 degrees ! Estimated noise=670.712 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.06357e-05 Jy ! Component: 100 - total flux cleaned = -0.000148303 Jy ! Component: 150 - total flux cleaned = -0.000166967 Jy ! Component: 200 - total flux cleaned = -0.000148236 Jy ! Total flux subtracted in 200 components = -0.000148236 Jy ! Clean residual min=-0.001654 max=0.001647 Jy/beam ! Clean residual mean=0.000003 rms=0.000445 Jy/beam ! Combined flux in latest and established models = 0.187919 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 131 components and 0.187919 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090440Jy sigma=0.000668 ! Fit after self-cal, rms=0.090442Jy sigma=0.000668 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.82049e-05 Jy ! Component: 100 - total flux cleaned = 2.76019e-05 Jy ! Component: 150 - total flux cleaned = 2.78307e-05 Jy ! Component: 200 - total flux cleaned = 2.72854e-05 Jy ! Total flux subtracted in 200 components = 2.72854e-05 Jy ! Clean residual min=-0.001628 max=0.001638 Jy/beam ! Clean residual mean=0.000003 rms=0.000443 Jy/beam ! Combined flux in latest and established models = 0.187946 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 136 components and 0.187947 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090436Jy sigma=0.000667 ! Fit after self-cal, rms=0.090436Jy sigma=0.000667 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090436Jy sigma=0.000667 ! Fit after self-cal, rms=0.090325Jy sigma=0.000667 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.669 mas, bmaj=12.37 mas, bpa=1.81 degrees ! Estimated noise=814.301 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.32454e-06 Jy ! Component: 100 - total flux cleaned = -3.05017e-05 Jy ! Component: 150 - total flux cleaned = -5.95007e-05 Jy ! Component: 200 - total flux cleaned = -8.28862e-05 Jy ! Total flux subtracted in 200 components = -8.28862e-05 Jy ! Clean residual min=-0.001881 max=0.001737 Jy/beam ! Clean residual mean=0.000006 rms=0.000535 Jy/beam ! Combined flux in latest and established models = 0.187864 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 150 components and 0.187864 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090323Jy sigma=0.000667 ! Fit after self-cal, rms=0.090323Jy sigma=0.000667 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.66721e-06 Jy ! Component: 100 - total flux cleaned = -6.19797e-06 Jy ! Component: 150 - total flux cleaned = -2.54737e-05 Jy ! Component: 200 - total flux cleaned = -3.38062e-05 Jy ! Total flux subtracted in 200 components = -3.38062e-05 Jy ! Clean residual min=-0.001874 max=0.001742 Jy/beam ! Clean residual mean=0.000006 rms=0.000535 Jy/beam ! Combined flux in latest and established models = 0.18783 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 154 components and 0.18783 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090322Jy sigma=0.000667 ! Fit after self-cal, rms=0.090322Jy sigma=0.000667 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.488 mas, bmaj=8.065 mas, bpa=0.954 degrees ! Estimated noise=670.007 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.488 x 8.065 at 0.954 degrees (North through East) ! Clean map min=-0.0015768 max=0.08388 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.84 mas, bmaj=6.956 mas, bpa=-0.8831 degrees ! Estimated noise=1005.65 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0767901 Jy ! Component: 100 - total flux cleaned = 0.116792 Jy ! Component: 150 - total flux cleaned = 0.140582 Jy ! Component: 200 - total flux cleaned = 0.155734 Jy ! Total flux subtracted in 200 components = 0.155734 Jy ! Clean residual min=-0.003642 max=0.008025 Jy/beam ! Clean residual mean=0.000030 rms=0.001076 Jy/beam ! Combined flux in latest and established models = 0.155734 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 26 model components to the UV plane model. ! The established model now contains 26 components and 0.155734 Jy ! Inverting map and beam ! Estimated beam: bmin=3.488 mas, bmaj=8.065 mas, bpa=0.954 degrees ! Estimated noise=670.007 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0138986 Jy ! Component: 100 - total flux cleaned = 0.0215263 Jy ! Component: 150 - total flux cleaned = 0.0259431 Jy ! Component: 200 - total flux cleaned = 0.0286536 Jy ! Total flux subtracted in 200 components = 0.0286536 Jy ! Clean residual min=-0.001902 max=0.002097 Jy/beam ! Clean residual mean=0.000008 rms=0.000491 Jy/beam ! Combined flux in latest and established models = 0.184388 Jy ! Adding 50 model components to the UV plane model. ! The established model now contains 63 components and 0.184388 Jy ! Inverting map ! Added new window around map position (4, 3). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00200972 Jy ! Component: 100 - total flux cleaned = 0.00260334 Jy ! Component: 150 - total flux cleaned = 0.00269333 Jy ! Component: 200 - total flux cleaned = 0.00276905 Jy ! Total flux subtracted in 200 components = 0.00276905 Jy ! Clean residual min=-0.001684 max=0.001767 Jy/beam ! Clean residual mean=0.000005 rms=0.000450 Jy/beam ! Combined flux in latest and established models = 0.187157 Jy ! Adding 19 model components to the UV plane model. ! The established model now contains 77 components and 0.187157 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.669 mas, bmaj=12.37 mas, bpa=1.81 degrees ! Estimated noise=814.301 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000667977 Jy ! Component: 100 - total flux cleaned = 0.000785751 Jy ! Component: 150 - total flux cleaned = 0.000834701 Jy ! Component: 200 - total flux cleaned = 0.000863663 Jy ! Total flux subtracted in 200 components = 0.000863663 Jy ! Clean residual min=-0.001975 max=0.001837 Jy/beam ! Clean residual mean=0.000006 rms=0.000540 Jy/beam ! Combined flux in latest and established models = 0.18802 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.74586e-07 Jy ! Component: 100 - total flux cleaned = 9.31513e-07 Jy ! Component: 150 - total flux cleaned = 1.2476e-05 Jy ! Component: 200 - total flux cleaned = 1.21609e-05 Jy ! Total flux subtracted in 200 components = 1.21609e-05 Jy ! Clean residual min=-0.001979 max=0.001834 Jy/beam ! Clean residual mean=0.000006 rms=0.000539 Jy/beam ! Combined flux in latest and established models = 0.188033 Jy ! Adding 43 model components to the UV plane model. ! The established model now contains 106 components and 0.188033 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.488 mas, bmaj=8.065 mas, bpa=0.954 degrees ! Estimated noise=670.007 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000206638 Jy ! Component: 100 - total flux cleaned = -0.000304703 Jy ! Component: 150 - total flux cleaned = -0.000369138 Jy ! Component: 200 - total flux cleaned = -0.000370149 Jy ! Total flux subtracted in 200 components = -0.000370149 Jy ! Clean residual min=-0.001557 max=0.001663 Jy/beam ! Clean residual mean=0.000004 rms=0.000439 Jy/beam ! Combined flux in latest and established models = 0.187662 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 117 components and 0.187662 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090310Jy sigma=0.000667 ! Fit after self-cal, rms=0.090303Jy sigma=0.000667 wmodel J0513-0032_S_2017_05_01_pus_map.mod ! Writing 117 model components to file: J0513-0032_S_2017_05_01_pus_map.mod wobs J0513-0032_S_2017_05_01_pus_uvs.fits ! Writing UV FITS file: J0513-0032_S_2017_05_01_pus_uvs.fits wwins J0513-0032_S_2017_05_01_pus_map.win ! wwins: Wrote 3 windows to J0513-0032_S_2017_05_01_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000160083 Jy ! Component: 100 - total flux cleaned = 0.000245727 Jy ! Component: 150 - total flux cleaned = 0.000355409 Jy ! Component: 200 - total flux cleaned = 0.000434409 Jy ! Component: 250 - total flux cleaned = 0.000485668 Jy ! Component: 300 - total flux cleaned = 0.000586297 Jy ! Component: 350 - total flux cleaned = 0.000659775 Jy ! Component: 400 - total flux cleaned = 0.000731548 Jy ! Component: 450 - total flux cleaned = 0.000801559 Jy ! Component: 500 - total flux cleaned = 0.00082438 Jy ! Component: 550 - total flux cleaned = 0.000869016 Jy ! Component: 600 - total flux cleaned = 0.000890665 Jy ! Component: 650 - total flux cleaned = 0.000890749 Jy ! Component: 700 - total flux cleaned = 0.000891004 Jy ! Component: 750 - total flux cleaned = 0.000953848 Jy ! Component: 800 - total flux cleaned = 0.00107707 Jy ! Component: 850 - total flux cleaned = 0.00109697 Jy ! Component: 900 - total flux cleaned = 0.00115648 Jy ! Component: 950 - total flux cleaned = 0.00113687 Jy ! Component: 1000 - total flux cleaned = 0.00119543 Jy ! Component: 1050 - total flux cleaned = 0.00121457 Jy ! Component: 1100 - total flux cleaned = 0.00123366 Jy ! Component: 1150 - total flux cleaned = 0.00125204 Jy ! Component: 1200 - total flux cleaned = 0.0012521 Jy ! Component: 1250 - total flux cleaned = 0.00123397 Jy ! Component: 1300 - total flux cleaned = 0.00127014 Jy ! Component: 1350 - total flux cleaned = 0.00132297 Jy ! Component: 1400 - total flux cleaned = 0.0012876 Jy ! Component: 1450 - total flux cleaned = 0.00130503 Jy ! Component: 1500 - total flux cleaned = 0.00123668 Jy ! Component: 1550 - total flux cleaned = 0.00125358 Jy ! Component: 1600 - total flux cleaned = 0.00127039 Jy ! Component: 1650 - total flux cleaned = 0.00122077 Jy ! Component: 1700 - total flux cleaned = 0.00123735 Jy ! Component: 1750 - total flux cleaned = 0.00122137 Jy ! Component: 1800 - total flux cleaned = 0.00126981 Jy ! Component: 1850 - total flux cleaned = 0.00128549 Jy ! Component: 1900 - total flux cleaned = 0.00119119 Jy ! Component: 1950 - total flux cleaned = 0.00117564 Jy ! Component: 2000 - total flux cleaned = 0.00117558 Jy ! Component: 2050 - total flux cleaned = 0.00112982 Jy ! Component: 2100 - total flux cleaned = 0.00119049 Jy ! Component: 2150 - total flux cleaned = 0.00117541 Jy ! Component: 2200 - total flux cleaned = 0.00116045 Jy ! Component: 2250 - total flux cleaned = 0.00116043 Jy ! Component: 2300 - total flux cleaned = 0.00120426 Jy ! Component: 2350 - total flux cleaned = 0.00118965 Jy ! Component: 2400 - total flux cleaned = 0.0011465 Jy ! Component: 2450 - total flux cleaned = 0.00114657 Jy ! Component: 2500 - total flux cleaned = 0.00118896 Jy ! Component: 2550 - total flux cleaned = 0.00118876 Jy ! Component: 2600 - total flux cleaned = 0.00113291 Jy ! Component: 2650 - total flux cleaned = 0.00106378 Jy ! Component: 2700 - total flux cleaned = 0.00100885 Jy ! Component: 2750 - total flux cleaned = 0.00096811 Jy ! Component: 2800 - total flux cleaned = 0.000954437 Jy ! Component: 2850 - total flux cleaned = 0.000900904 Jy ! Component: 2900 - total flux cleaned = 0.000887678 Jy ! Component: 2950 - total flux cleaned = 0.000847985 Jy ! Component: 3000 - total flux cleaned = 0.000795573 Jy ! Component: 3050 - total flux cleaned = 0.000808741 Jy ! Component: 3100 - total flux cleaned = 0.000782923 Jy ! Component: 3150 - total flux cleaned = 0.000795794 Jy ! Component: 3200 - total flux cleaned = 0.000732109 Jy ! Component: 3250 - total flux cleaned = 0.000719373 Jy ! Component: 3300 - total flux cleaned = 0.000593923 Jy ! Component: 3350 - total flux cleaned = 0.000581393 Jy ! Component: 3400 - total flux cleaned = 0.000531741 Jy ! Component: 3450 - total flux cleaned = 0.000470428 Jy ! Component: 3500 - total flux cleaned = 0.000433856 Jy ! Component: 3550 - total flux cleaned = 0.000445976 Jy ! Component: 3600 - total flux cleaned = 0.000433962 Jy ! Component: 3650 - total flux cleaned = 0.000421884 Jy ! Component: 3700 - total flux cleaned = 0.000350547 Jy ! Component: 3750 - total flux cleaned = 0.000350428 Jy ! Component: 3800 - total flux cleaned = 0.000291662 Jy ! Component: 3850 - total flux cleaned = 0.00032649 Jy ! Component: 3900 - total flux cleaned = 0.000268558 Jy ! Component: 3950 - total flux cleaned = 0.000234066 Jy ! Component: 4000 - total flux cleaned = 0.000199884 Jy ! Component: 4050 - total flux cleaned = 0.000177093 Jy ! Total flux subtracted in 4096 components = 0.000131963 Jy ! Clean residual min=-0.000668 max=0.000671 Jy/beam ! Clean residual mean=0.000001 rms=0.000218 Jy/beam ! Combined flux in latest and established models = 0.187794 Jy keep ! Adding 292 model components to the UV plane model. ! The established model now contains 409 components and 0.187794 Jy ![Exited script file: muppet] wmap "J0513-0032_S_2017_05_01_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.488 x 8.065 at 0.954 degrees (North through East) ! Clean map min=-0.0012047 max=0.082639 Jy/beam ! Writing clean map to FITS file: J0513-0032_S_2017_05_01_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0826394 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000217089 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.788083 0.788083 1.57617 3.15233 6.30467 12.6093 25.2187 50.4373 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.082 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.488 x 8.065 at 0.954 degrees (North through East) ! Clean map min=-0.0012047 max=0.082639 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0513-0032_S_2017_05_01_pus_uvs.log closed on Wed May 1 18:27:55 2019