! Started logfile: J0513+0100_S_2017_08_05_pus_uvs.log on Thu May 9 19:21:24 2019 obs J0513+0100_S_2017_08_05_pus_uva.fits ! Reading UV FITS file: J0513+0100_S_2017_08_05_pus_uva.fits ! AN table 1: 143 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.957576 visibilities/baseline/integration-bin. ! Found source: J0513+0100 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 513 lines of history. ! ! Reading 24648 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0513+0100_S_2017_08_05_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 67 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 171 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 171 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 933 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.823882Jy sigma=0.007072 ! Fit after self-cal, rms=0.804228Jy sigma=0.006910 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.757 mas, bmaj=7.21 mas, bpa=-5.166 degrees ! Estimated noise=930.364 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.150058 Jy ! Component: 100 - total flux cleaned = 0.219321 Jy ! Total flux subtracted in 100 components = 0.219321 Jy ! Clean residual min=-0.017681 max=0.054606 Jy/beam ! Clean residual mean=-0.000008 rms=0.004689 Jy/beam ! Combined flux in latest and established models = 0.219321 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 0.219321 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.135418Jy sigma=0.001098 ! Fit after self-cal, rms=0.134851Jy sigma=0.001094 ! Inverting map ! Added new window around map position (-4, 2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0534893 Jy ! Component: 100 - total flux cleaned = 0.0849463 Jy ! Total flux subtracted in 100 components = 0.0849463 Jy ! Clean residual min=-0.009593 max=0.017042 Jy/beam ! Clean residual mean=-0.000006 rms=0.002390 Jy/beam ! Combined flux in latest and established models = 0.304268 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 40 components and 0.304268 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104029Jy sigma=0.000818 ! Fit after self-cal, rms=0.103127Jy sigma=0.000810 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0230751 Jy ! Component: 100 - total flux cleaned = 0.0377591 Jy ! Total flux subtracted in 100 components = 0.0377591 Jy ! Clean residual min=-0.007308 max=0.009438 Jy/beam ! Clean residual mean=-0.000004 rms=0.001656 Jy/beam ! Combined flux in latest and established models = 0.342027 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 59 components and 0.342027 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095185Jy sigma=0.000744 ! Fit after self-cal, rms=0.094972Jy sigma=0.000742 ! Inverting map ! Added new window around map position (-0.5, 8.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0124285 Jy ! Component: 100 - total flux cleaned = 0.0181546 Jy ! Total flux subtracted in 100 components = 0.0181546 Jy ! Clean residual min=-0.005732 max=0.005839 Jy/beam ! Clean residual mean=-0.000003 rms=0.001375 Jy/beam ! Combined flux in latest and established models = 0.360181 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 78 components and 0.360181 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092513Jy sigma=0.000724 ! Fit after self-cal, rms=0.092416Jy sigma=0.000723 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.119 mas, bmaj=8.154 mas, bpa=-5.408 degrees ! Estimated noise=648.546 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00961396 Jy ! Component: 100 - total flux cleaned = 0.0154704 Jy ! Component: 150 - total flux cleaned = 0.0195879 Jy ! Component: 200 - total flux cleaned = 0.0208725 Jy ! Total flux subtracted in 200 components = 0.0208725 Jy ! Clean residual min=-0.004463 max=0.004826 Jy/beam ! Clean residual mean=-0.000003 rms=0.001104 Jy/beam ! Combined flux in latest and established models = 0.381054 Jy ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 107 components and 0.381054 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090892Jy sigma=0.000716 ! Fit after self-cal, rms=0.090839Jy sigma=0.000715 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.97 HN 0.98 KP 1.02 ! LA 1.01 MK 1.01 NL 0.88 OV 1.02 ! PT 1.02 SC 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.02 HN 0.99 KP 1.02 ! LA 0.99 MK 1.00 NL 1.05 OV 1.07 ! PT 1.00 SC 1.01 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.04 HN 1.00 KP 0.89 ! LA 0.78 MK 1.02 NL 1.19 OV 0.98 ! PT 0.99 SC 0.97 ! ! ! Correcting IF 4. ! A total of 141 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.08 HN 0.94 KP 1.00* ! LA 1.00* MK 1.24 NL 1.00* OV 1.00* ! PT 1.03 SC 1.00* ! ! ! Fit before self-cal, rms=0.090839Jy sigma=0.000715 ! Fit after self-cal, rms=0.084057Jy sigma=0.000683 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.148 mas, bmaj=8.146 mas, bpa=-4.687 degrees ! Estimated noise=647.26 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000755997 Jy ! Component: 100 - total flux cleaned = -0.00108272 Jy ! Component: 150 - total flux cleaned = -0.00130587 Jy ! Component: 200 - total flux cleaned = -0.00157791 Jy ! Total flux subtracted in 200 components = -0.00157791 Jy ! Clean residual min=-0.002878 max=0.002575 Jy/beam ! Clean residual mean=0.000001 rms=0.000656 Jy/beam ! Combined flux in latest and established models = 0.379476 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 119 components and 0.379476 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083907Jy sigma=0.000682 ! Fit after self-cal, rms=0.083859Jy sigma=0.000682 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083859Jy sigma=0.000682 ! Fit after self-cal, rms=0.084180Jy sigma=0.000680 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.15 mas, bmaj=8.154 mas, bpa=-4.704 degrees ! Estimated noise=647.791 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.79937e-05 Jy ! Component: 100 - total flux cleaned = -0.000300217 Jy ! Component: 150 - total flux cleaned = -0.000531647 Jy ! Component: 200 - total flux cleaned = -0.000642571 Jy ! Total flux subtracted in 200 components = -0.000642571 Jy ! Clean residual min=-0.002917 max=0.002630 Jy/beam ! Clean residual mean=-0.000003 rms=0.000588 Jy/beam ! Combined flux in latest and established models = 0.378834 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 128 components and 0.378834 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084083Jy sigma=0.000679 ! Fit after self-cal, rms=0.084078Jy sigma=0.000679 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000138672 Jy ! Component: 100 - total flux cleaned = -2.22404e-05 Jy ! Component: 150 - total flux cleaned = -0.000171815 Jy ! Component: 200 - total flux cleaned = -0.000312622 Jy ! Total flux subtracted in 200 components = -0.000312622 Jy ! Clean residual min=-0.002792 max=0.002504 Jy/beam ! Clean residual mean=-0.000003 rms=0.000573 Jy/beam ! Combined flux in latest and established models = 0.378521 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 129 components and 0.378521 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084009Jy sigma=0.000679 ! Fit after self-cal, rms=0.084001Jy sigma=0.000679 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084001Jy sigma=0.000679 ! Fit after self-cal, rms=0.083864Jy sigma=0.000678 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.149 mas, bmaj=8.148 mas, bpa=-4.649 degrees ! Estimated noise=647.23 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.29541e-05 Jy ! Component: 100 - total flux cleaned = -0.000121883 Jy ! Component: 150 - total flux cleaned = -0.000301754 Jy ! Component: 200 - total flux cleaned = -0.000428885 Jy ! Total flux subtracted in 200 components = -0.000428885 Jy ! Clean residual min=-0.002788 max=0.002311 Jy/beam ! Clean residual mean=-0.000004 rms=0.000549 Jy/beam ! Combined flux in latest and established models = 0.378092 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 132 components and 0.378092 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083807Jy sigma=0.000678 ! Fit after self-cal, rms=0.083805Jy sigma=0.000678 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.04071e-05 Jy ! Component: 100 - total flux cleaned = -3.21265e-05 Jy ! Component: 150 - total flux cleaned = -0.00018857 Jy ! Component: 200 - total flux cleaned = -0.000334914 Jy ! Total flux subtracted in 200 components = -0.000334914 Jy ! Clean residual min=-0.002703 max=0.002207 Jy/beam ! Clean residual mean=-0.000004 rms=0.000538 Jy/beam ! Combined flux in latest and established models = 0.377757 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 133 components and 0.377757 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083762Jy sigma=0.000678 ! Fit after self-cal, rms=0.083756Jy sigma=0.000678 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083756Jy sigma=0.000678 ! Fit after self-cal, rms=0.083697Jy sigma=0.000678 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.27 mas, bmaj=13.37 mas, bpa=-6.724 degrees ! Estimated noise=833.328 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000475443 Jy ! Component: 100 - total flux cleaned = -0.000570383 Jy ! Component: 150 - total flux cleaned = -0.000701167 Jy ! Component: 200 - total flux cleaned = -0.00078563 Jy ! Total flux subtracted in 200 components = -0.00078563 Jy ! Clean residual min=-0.002495 max=0.001980 Jy/beam ! Clean residual mean=-0.000008 rms=0.000579 Jy/beam ! Combined flux in latest and established models = 0.376971 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 138 components and 0.376971 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083672Jy sigma=0.000678 ! Fit after self-cal, rms=0.083664Jy sigma=0.000677 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000114868 Jy ! Component: 100 - total flux cleaned = -8.83661e-05 Jy ! Component: 150 - total flux cleaned = -0.000108468 Jy ! Component: 200 - total flux cleaned = -0.000124775 Jy ! Total flux subtracted in 200 components = -0.000124775 Jy ! Clean residual min=-0.002444 max=0.001961 Jy/beam ! Clean residual mean=-0.000008 rms=0.000574 Jy/beam ! Combined flux in latest and established models = 0.376847 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 150 components and 0.376847 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083650Jy sigma=0.000677 ! Fit after self-cal, rms=0.083643Jy sigma=0.000677 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.151 mas, bmaj=8.147 mas, bpa=-4.613 degrees ! Estimated noise=647.559 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.151 x 8.147 at -4.613 degrees (North through East) ! Clean map min=-0.0039687 max=0.1824 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.783 mas, bmaj=7.192 mas, bpa=-4.173 degrees ! Estimated noise=939.682 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.155392 Jy ! Component: 100 - total flux cleaned = 0.230988 Jy ! Component: 150 - total flux cleaned = 0.276188 Jy ! Component: 200 - total flux cleaned = 0.305474 Jy ! Total flux subtracted in 200 components = 0.305474 Jy ! Clean residual min=-0.008096 max=0.015841 Jy/beam ! Clean residual mean=-0.000005 rms=0.002079 Jy/beam ! Combined flux in latest and established models = 0.305474 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 37 model components to the UV plane model. ! The established model now contains 37 components and 0.305474 Jy ! Inverting map and beam ! Estimated beam: bmin=3.151 mas, bmaj=8.147 mas, bpa=-4.613 degrees ! Estimated noise=647.559 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0268957 Jy ! Component: 100 - total flux cleaned = 0.0430913 Jy ! Component: 150 - total flux cleaned = 0.0534905 Jy ! Component: 200 - total flux cleaned = 0.0603042 Jy ! Total flux subtracted in 200 components = 0.0603042 Jy ! Clean residual min=-0.003852 max=0.004207 Jy/beam ! Clean residual mean=-0.000004 rms=0.000798 Jy/beam ! Combined flux in latest and established models = 0.365779 Jy ! Adding 60 model components to the UV plane model. ! The established model now contains 85 components and 0.365778 Jy ! Inverting map ! Added new window around map position (8.5, 7.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00365732 Jy ! Component: 100 - total flux cleaned = 0.00523276 Jy ! Component: 150 - total flux cleaned = 0.00656453 Jy ! Component: 200 - total flux cleaned = 0.00770203 Jy ! Total flux subtracted in 200 components = 0.00770203 Jy ! Clean residual min=-0.002290 max=0.002995 Jy/beam ! Clean residual mean=-0.000003 rms=0.000588 Jy/beam ! Combined flux in latest and established models = 0.37348 Jy ! Adding 25 model components to the UV plane model. ! The established model now contains 105 components and 0.37348 Jy ! Inverting map ! Added new window around map position (-10, -11). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00196511 Jy ! Component: 100 - total flux cleaned = 0.00252842 Jy ! Component: 150 - total flux cleaned = 0.00293857 Jy ! Component: 200 - total flux cleaned = 0.00323481 Jy ! Total flux subtracted in 200 components = 0.00323481 Jy ! Clean residual min=-0.001983 max=0.002132 Jy/beam ! Clean residual mean=-0.000003 rms=0.000515 Jy/beam ! Combined flux in latest and established models = 0.376715 Jy ! Adding 21 model components to the UV plane model. ! The established model now contains 120 components and 0.376715 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.27 mas, bmaj=13.37 mas, bpa=-6.724 degrees ! Estimated noise=833.328 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00143158 Jy ! Component: 100 - total flux cleaned = 0.00169128 Jy ! Component: 150 - total flux cleaned = 0.00176521 Jy ! Component: 200 - total flux cleaned = 0.00183242 Jy ! Total flux subtracted in 200 components = 0.00183242 Jy ! Clean residual min=-0.002152 max=0.001684 Jy/beam ! Clean residual mean=-0.000006 rms=0.000524 Jy/beam ! Combined flux in latest and established models = 0.378548 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.20902e-05 Jy ! Component: 100 - total flux cleaned = 6.16935e-05 Jy ! Component: 150 - total flux cleaned = 0.000120397 Jy ! Component: 200 - total flux cleaned = 0.000148752 Jy ! Total flux subtracted in 200 components = 0.000148752 Jy ! Clean residual min=-0.002098 max=0.001697 Jy/beam ! Clean residual mean=-0.000006 rms=0.000517 Jy/beam ! Combined flux in latest and established models = 0.378696 Jy ! Adding 32 model components to the UV plane model. ! The established model now contains 151 components and 0.378696 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.151 mas, bmaj=8.147 mas, bpa=-4.613 degrees ! Estimated noise=647.559 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000389865 Jy ! Component: 100 - total flux cleaned = -0.000273347 Jy ! Component: 150 - total flux cleaned = -0.000324135 Jy ! Component: 200 - total flux cleaned = -0.00027368 Jy ! Total flux subtracted in 200 components = -0.00027368 Jy ! Clean residual min=-0.002178 max=0.001817 Jy/beam ! Clean residual mean=-0.000003 rms=0.000468 Jy/beam ! Combined flux in latest and established models = 0.378423 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 173 components and 0.378423 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083503Jy sigma=0.000676 ! Fit after self-cal, rms=0.083474Jy sigma=0.000676 wmodel J0513+0100_S_2017_08_05_pus_map.mod ! Writing 173 model components to file: J0513+0100_S_2017_08_05_pus_map.mod wobs J0513+0100_S_2017_08_05_pus_uvs.fits ! Writing UV FITS file: J0513+0100_S_2017_08_05_pus_uvs.fits wwins J0513+0100_S_2017_08_05_pus_map.win ! wwins: Wrote 5 windows to J0513+0100_S_2017_08_05_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000224968 Jy ! Component: 100 - total flux cleaned = 1.00567e-05 Jy ! Component: 150 - total flux cleaned = 0.000102783 Jy ! Component: 200 - total flux cleaned = 0.000192067 Jy ! Component: 250 - total flux cleaned = 0.000163896 Jy ! Component: 300 - total flux cleaned = 0.000163813 Jy ! Component: 350 - total flux cleaned = 0.000163279 Jy ! Component: 400 - total flux cleaned = 0.000110245 Jy ! Component: 450 - total flux cleaned = 8.43592e-05 Jy ! Component: 500 - total flux cleaned = 5.91236e-05 Jy ! Component: 550 - total flux cleaned = 5.93811e-05 Jy ! Component: 600 - total flux cleaned = 3.56055e-05 Jy ! Component: 650 - total flux cleaned = 3.54299e-05 Jy ! Component: 700 - total flux cleaned = -5.90973e-05 Jy ! Component: 750 - total flux cleaned = -0.000106047 Jy ! Component: 800 - total flux cleaned = -0.000151469 Jy ! Component: 850 - total flux cleaned = -0.000218646 Jy ! Component: 900 - total flux cleaned = -0.00028481 Jy ! Component: 950 - total flux cleaned = -0.000284721 Jy ! Component: 1000 - total flux cleaned = -0.000392868 Jy ! Component: 1050 - total flux cleaned = -0.000456861 Jy ! Component: 1100 - total flux cleaned = -0.000478023 Jy ! Component: 1150 - total flux cleaned = -0.000561262 Jy ! Component: 1200 - total flux cleaned = -0.000622476 Jy ! Component: 1250 - total flux cleaned = -0.000683163 Jy ! Component: 1300 - total flux cleaned = -0.000703176 Jy ! Component: 1350 - total flux cleaned = -0.000742779 Jy ! Component: 1400 - total flux cleaned = -0.000742665 Jy ! Component: 1450 - total flux cleaned = -0.000820016 Jy ! Component: 1500 - total flux cleaned = -0.000953686 Jy ! Component: 1550 - total flux cleaned = -0.000972385 Jy ! Component: 1600 - total flux cleaned = -0.00100991 Jy ! Component: 1650 - total flux cleaned = -0.00110207 Jy ! Component: 1700 - total flux cleaned = -0.0011386 Jy ! Component: 1750 - total flux cleaned = -0.00115688 Jy ! Component: 1800 - total flux cleaned = -0.00126475 Jy ! Component: 1850 - total flux cleaned = -0.00137135 Jy ! Component: 1900 - total flux cleaned = -0.00138898 Jy ! Component: 1950 - total flux cleaned = -0.00142407 Jy ! Component: 2000 - total flux cleaned = -0.0015456 Jy ! Component: 2050 - total flux cleaned = -0.00156265 Jy ! Component: 2100 - total flux cleaned = -0.00163049 Jy ! Component: 2150 - total flux cleaned = -0.00169802 Jy ! Component: 2200 - total flux cleaned = -0.00188194 Jy ! Component: 2250 - total flux cleaned = -0.00188157 Jy ! Component: 2300 - total flux cleaned = -0.00188174 Jy ! Component: 2350 - total flux cleaned = -0.00199579 Jy ! Component: 2400 - total flux cleaned = -0.0020767 Jy ! Component: 2450 - total flux cleaned = -0.00212464 Jy ! Component: 2500 - total flux cleaned = -0.00207697 Jy ! Component: 2550 - total flux cleaned = -0.00212448 Jy ! Component: 2600 - total flux cleaned = -0.00224958 Jy ! Component: 2650 - total flux cleaned = -0.00223417 Jy ! Component: 2700 - total flux cleaned = -0.00229573 Jy ! Component: 2750 - total flux cleaned = -0.00240248 Jy ! Component: 2800 - total flux cleaned = -0.0024932 Jy ! Component: 2850 - total flux cleaned = -0.00246301 Jy ! Component: 2900 - total flux cleaned = -0.00258211 Jy ! Component: 2950 - total flux cleaned = -0.00258216 Jy ! Component: 3000 - total flux cleaned = -0.00265554 Jy ! Component: 3050 - total flux cleaned = -0.00268484 Jy ! Component: 3100 - total flux cleaned = -0.00278594 Jy ! Component: 3150 - total flux cleaned = -0.00282892 Jy ! Component: 3200 - total flux cleaned = -0.00288577 Jy ! Component: 3250 - total flux cleaned = -0.00287151 Jy ! Component: 3300 - total flux cleaned = -0.00291366 Jy ! Component: 3350 - total flux cleaned = -0.00295549 Jy ! Component: 3400 - total flux cleaned = -0.00301084 Jy ! Component: 3450 - total flux cleaned = -0.00306571 Jy ! Component: 3500 - total flux cleaned = -0.00309308 Jy ! Component: 3550 - total flux cleaned = -0.0031605 Jy ! Component: 3600 - total flux cleaned = -0.0031738 Jy ! Component: 3650 - total flux cleaned = -0.00321399 Jy ! Component: 3700 - total flux cleaned = -0.00330634 Jy ! Component: 3750 - total flux cleaned = -0.00337172 Jy ! Component: 3800 - total flux cleaned = -0.00341065 Jy ! Component: 3850 - total flux cleaned = -0.00343643 Jy ! Component: 3900 - total flux cleaned = -0.00344938 Jy ! Component: 3950 - total flux cleaned = -0.0035132 Jy ! Component: 4000 - total flux cleaned = -0.00355126 Jy ! Component: 4050 - total flux cleaned = -0.0035891 Jy ! Total flux subtracted in 4096 components = -0.00363915 Jy ! Clean residual min=-0.000764 max=0.000717 Jy/beam ! Clean residual mean=-0.000002 rms=0.000233 Jy/beam ! Combined flux in latest and established models = 0.374784 Jy keep ! Adding 294 model components to the UV plane model. ! The established model now contains 466 components and 0.374783 Jy ![Exited script file: muppet] wmap "J0513+0100_S_2017_08_05_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.151 x 8.147 at -4.613 degrees (North through East) ! Clean map min=-0.002912 max=0.18578 Jy/beam ! Writing clean map to FITS file: J0513+0100_S_2017_08_05_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.185783 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000230555 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.372298 0.372298 0.744595 1.48919 2.97838 5.95676 11.9135 23.8271 47.6541 95.3082 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.185 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.151 x 8.147 at -4.613 degrees (North through East) ! Clean map min=-0.002912 max=0.18578 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0513+0100_S_2017_08_05_pus_uvs.log closed on Thu May 9 19:21:31 2019