! Started logfile: J0510-3142_S_2017_08_05_pus_uvs.log on Thu May 9 19:21:19 2019 obs J0510-3142_S_2017_08_05_pus_uva.fits ! Reading UV FITS file: J0510-3142_S_2017_08_05_pus_uva.fits ! AN table 1: 76 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.718421 visibilities/baseline/integration-bin. ! Found source: J0510-3142 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 513 lines of history. ! ! Reading 9828 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0510-3142_S_2017_08_05_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 137 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 188 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 135 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 625 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.666339Jy sigma=0.004663 ! Fit after self-cal, rms=0.630072Jy sigma=0.004402 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.524 mas, bmaj=6.498 mas, bpa=-3.177 degrees ! Estimated noise=1988.89 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.280198 Jy ! Component: 100 - total flux cleaned = 0.343422 Jy ! Total flux subtracted in 100 components = 0.343422 Jy ! Clean residual min=-0.012717 max=0.022326 Jy/beam ! Clean residual mean=-0.000158 rms=0.004320 Jy/beam ! Combined flux in latest and established models = 0.343422 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 0.343422 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126217Jy sigma=0.000798 ! Fit after self-cal, rms=0.126209Jy sigma=0.000798 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.958 mas, bmaj=7.567 mas, bpa=-2.541 degrees ! Estimated noise=1273.48 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0356736 Jy ! Component: 100 - total flux cleaned = 0.0479242 Jy ! Component: 150 - total flux cleaned = 0.0528671 Jy ! Component: 200 - total flux cleaned = 0.0544235 Jy ! Total flux subtracted in 200 components = 0.0544235 Jy ! Clean residual min=-0.009500 max=0.010918 Jy/beam ! Clean residual mean=-0.000178 rms=0.002679 Jy/beam ! Combined flux in latest and established models = 0.397846 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 17 components and 0.397846 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116286Jy sigma=0.000740 ! Fit after self-cal, rms=0.116273Jy sigma=0.000740 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.26 FD 0.95 HN 1.00* KP 1.04 ! LA 1.00 MK 0.98 NL 0.98 OV 1.02 ! PT 1.01 SC 0.94 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00 HN 1.00* KP 1.00 ! LA 0.96 MK 0.98 NL 1.12 OV 1.05 ! PT 0.99 SC 1.02 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.04 HN 1.00* KP 0.87 ! LA 0.75 MK 1.00 NL 1.23 OV 0.96 ! PT 0.97 SC 1.01 ! ! ! Correcting IF 4. ! A total of 135 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.116273Jy sigma=0.000740 ! Fit after self-cal, rms=0.104848Jy sigma=0.000677 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.969 mas, bmaj=7.542 mas, bpa=-1.741 degrees ! Estimated noise=1286.24 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000760664 Jy ! Component: 100 - total flux cleaned = -0.000760771 Jy ! Component: 150 - total flux cleaned = -0.000722844 Jy ! Component: 200 - total flux cleaned = -0.00072093 Jy ! Total flux subtracted in 200 components = -0.00072093 Jy ! Clean residual min=-0.004722 max=0.006234 Jy/beam ! Clean residual mean=-0.000055 rms=0.001376 Jy/beam ! Combined flux in latest and established models = 0.397125 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 25 components and 0.397125 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104810Jy sigma=0.000677 ! Fit after self-cal, rms=0.104859Jy sigma=0.000676 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104859Jy sigma=0.000676 ! Fit after self-cal, rms=0.103106Jy sigma=0.000664 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.972 mas, bmaj=7.527 mas, bpa=-1.769 degrees ! Estimated noise=1285 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000540629 Jy ! Component: 100 - total flux cleaned = -0.000539571 Jy ! Component: 150 - total flux cleaned = -0.000539815 Jy ! Component: 200 - total flux cleaned = -0.000556509 Jy ! Total flux subtracted in 200 components = -0.000556509 Jy ! Clean residual min=-0.003426 max=0.003201 Jy/beam ! Clean residual mean=-0.000043 rms=0.000841 Jy/beam ! Combined flux in latest and established models = 0.396569 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 31 components and 0.396569 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103096Jy sigma=0.000664 ! Fit after self-cal, rms=0.103111Jy sigma=0.000664 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.36366e-05 Jy ! Component: 100 - total flux cleaned = -4.99667e-05 Jy ! Component: 150 - total flux cleaned = -4.94625e-05 Jy ! Component: 200 - total flux cleaned = -6.43726e-05 Jy ! Total flux subtracted in 200 components = -6.43726e-05 Jy ! Clean residual min=-0.003430 max=0.003188 Jy/beam ! Clean residual mean=-0.000044 rms=0.000840 Jy/beam ! Combined flux in latest and established models = 0.396504 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 35 components and 0.396504 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103105Jy sigma=0.000664 ! Fit after self-cal, rms=0.103105Jy sigma=0.000664 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103105Jy sigma=0.000664 ! Fit after self-cal, rms=0.103605Jy sigma=0.000663 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.972 mas, bmaj=7.523 mas, bpa=-1.794 degrees ! Estimated noise=1284.34 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000334313 Jy ! Component: 100 - total flux cleaned = -0.000282567 Jy ! Component: 150 - total flux cleaned = -0.000237925 Jy ! Component: 200 - total flux cleaned = -0.000237077 Jy ! Total flux subtracted in 200 components = -0.000237077 Jy ! Clean residual min=-0.003347 max=0.003234 Jy/beam ! Clean residual mean=-0.000039 rms=0.000786 Jy/beam ! Combined flux in latest and established models = 0.396267 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 39 components and 0.396267 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103597Jy sigma=0.000663 ! Fit after self-cal, rms=0.103610Jy sigma=0.000663 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.73834e-05 Jy ! Component: 100 - total flux cleaned = -6.31497e-05 Jy ! Component: 150 - total flux cleaned = -4.97222e-05 Jy ! Component: 200 - total flux cleaned = -4.93264e-05 Jy ! Total flux subtracted in 200 components = -4.93264e-05 Jy ! Clean residual min=-0.003347 max=0.003230 Jy/beam ! Clean residual mean=-0.000039 rms=0.000784 Jy/beam ! Combined flux in latest and established models = 0.396218 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 41 components and 0.396218 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103604Jy sigma=0.000663 ! Fit after self-cal, rms=0.103605Jy sigma=0.000663 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103605Jy sigma=0.000663 ! Fit after self-cal, rms=0.103570Jy sigma=0.000663 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.928 mas, bmaj=23.31 mas, bpa=0.2587 degrees ! Estimated noise=1680.65 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000195064 Jy ! Component: 100 - total flux cleaned = -0.000203906 Jy ! Component: 150 - total flux cleaned = -0.00021178 Jy ! Component: 200 - total flux cleaned = -0.00021915 Jy ! Total flux subtracted in 200 components = -0.00021915 Jy ! Clean residual min=-0.003436 max=0.004025 Jy/beam ! Clean residual mean=-0.000077 rms=0.001066 Jy/beam ! Combined flux in latest and established models = 0.395999 Jy selfcal ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 44 components and 0.395999 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103569Jy sigma=0.000663 ! Fit after self-cal, rms=0.103569Jy sigma=0.000663 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.87825e-08 Jy ! Component: 100 - total flux cleaned = 2.42093e-07 Jy ! Component: 150 - total flux cleaned = 4.37841e-07 Jy ! Component: 200 - total flux cleaned = 3.87142e-07 Jy ! Total flux subtracted in 200 components = 3.87142e-07 Jy ! Clean residual min=-0.003440 max=0.004025 Jy/beam ! Clean residual mean=-0.000077 rms=0.001066 Jy/beam ! Combined flux in latest and established models = 0.395999 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 45 components and 0.395999 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103570Jy sigma=0.000663 ! Fit after self-cal, rms=0.103569Jy sigma=0.000663 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.972 mas, bmaj=7.521 mas, bpa=-1.811 degrees ! Estimated noise=1283.83 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.972 x 7.521 at -1.811 degrees (North through East) ! Clean map min=-0.0032199 max=0.37181 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.509 mas, bmaj=6.44 mas, bpa=-2.494 degrees ! Estimated noise=2057.36 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.288586 Jy ! Component: 100 - total flux cleaned = 0.354876 Jy ! Component: 150 - total flux cleaned = 0.378733 Jy ! Component: 200 - total flux cleaned = 0.388378 Jy ! Total flux subtracted in 200 components = 0.388378 Jy ! Clean residual min=-0.005641 max=0.005542 Jy/beam ! Clean residual mean=-0.000035 rms=0.001473 Jy/beam ! Combined flux in latest and established models = 0.388377 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.388377 Jy ! Inverting map and beam ! Estimated beam: bmin=2.972 mas, bmaj=7.521 mas, bpa=-1.811 degrees ! Estimated noise=1283.83 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00507396 Jy ! Component: 100 - total flux cleaned = 0.00664276 Jy ! Component: 150 - total flux cleaned = 0.00695339 Jy ! Component: 200 - total flux cleaned = 0.0071462 Jy ! Total flux subtracted in 200 components = 0.0071462 Jy ! Clean residual min=-0.003400 max=0.003359 Jy/beam ! Clean residual mean=-0.000040 rms=0.000804 Jy/beam ! Combined flux in latest and established models = 0.395524 Jy ! Adding 14 model components to the UV plane model. ! The established model now contains 27 components and 0.395524 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.928 mas, bmaj=23.31 mas, bpa=0.2587 degrees ! Estimated noise=1680.65 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000314407 Jy ! Component: 100 - total flux cleaned = 0.000316403 Jy ! Component: 150 - total flux cleaned = 0.000319719 Jy ! Component: 200 - total flux cleaned = 0.000342131 Jy ! Total flux subtracted in 200 components = 0.000342131 Jy ! Clean residual min=-0.003454 max=0.004065 Jy/beam ! Clean residual mean=-0.000078 rms=0.001078 Jy/beam ! Combined flux in latest and established models = 0.395866 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.92483e-07 Jy ! Component: 100 - total flux cleaned = 1.77049e-05 Jy ! Component: 150 - total flux cleaned = 1.8319e-05 Jy ! Component: 200 - total flux cleaned = 1.84681e-05 Jy ! Total flux subtracted in 200 components = 1.84681e-05 Jy ! Clean residual min=-0.003445 max=0.004049 Jy/beam ! Clean residual mean=-0.000078 rms=0.001070 Jy/beam ! Combined flux in latest and established models = 0.395884 Jy ! Adding 13 model components to the UV plane model. ! The established model now contains 39 components and 0.395884 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.972 mas, bmaj=7.521 mas, bpa=-1.811 degrees ! Estimated noise=1283.83 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000153562 Jy ! Component: 100 - total flux cleaned = -0.000153814 Jy ! Component: 150 - total flux cleaned = -0.000127243 Jy ! Component: 200 - total flux cleaned = -0.000127321 Jy ! Total flux subtracted in 200 components = -0.000127321 Jy ! Clean residual min=-0.003362 max=0.003284 Jy/beam ! Clean residual mean=-0.000040 rms=0.000785 Jy/beam ! Combined flux in latest and established models = 0.395757 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 43 components and 0.395757 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103574Jy sigma=0.000663 ! Fit after self-cal, rms=0.103572Jy sigma=0.000663 wmodel J0510-3142_S_2017_08_05_pus_map.mod ! Writing 43 model components to file: J0510-3142_S_2017_08_05_pus_map.mod wobs J0510-3142_S_2017_08_05_pus_uvs.fits ! Writing UV FITS file: J0510-3142_S_2017_08_05_pus_uvs.fits wwins J0510-3142_S_2017_08_05_pus_map.win ! wwins: Wrote 1 windows to J0510-3142_S_2017_08_05_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.0005614 Jy ! Component: 100 - total flux cleaned = -0.000993708 Jy ! Component: 150 - total flux cleaned = -0.00109493 Jy ! Component: 200 - total flux cleaned = -0.00114062 Jy ! Component: 250 - total flux cleaned = -0.00131764 Jy ! Component: 300 - total flux cleaned = -0.00157186 Jy ! Component: 350 - total flux cleaned = -0.00181739 Jy ! Component: 400 - total flux cleaned = -0.00213212 Jy ! Component: 450 - total flux cleaned = -0.00247603 Jy ! Component: 500 - total flux cleaned = -0.00284652 Jy ! Component: 550 - total flux cleaned = -0.00306314 Jy ! Component: 600 - total flux cleaned = -0.00327451 Jy ! Component: 650 - total flux cleaned = -0.00355005 Jy ! Component: 700 - total flux cleaned = -0.00385288 Jy ! Component: 750 - total flux cleaned = -0.00401792 Jy ! Component: 800 - total flux cleaned = -0.00430833 Jy ! Component: 850 - total flux cleaned = -0.00446618 Jy ! Component: 900 - total flux cleaned = -0.00474684 Jy ! Component: 950 - total flux cleaned = -0.0048682 Jy ! Component: 1000 - total flux cleaned = -0.0050486 Jy ! Component: 1050 - total flux cleaned = -0.00519623 Jy ! Component: 1100 - total flux cleaned = -0.00542914 Jy ! Component: 1150 - total flux cleaned = -0.00551508 Jy ! Component: 1200 - total flux cleaned = -0.00565623 Jy ! Component: 1250 - total flux cleaned = -0.005823 Jy ! Component: 1300 - total flux cleaned = -0.00596006 Jy ! Component: 1350 - total flux cleaned = -0.00614915 Jy ! Component: 1400 - total flux cleaned = -0.00620222 Jy ! Component: 1450 - total flux cleaned = -0.00633374 Jy ! Component: 1500 - total flux cleaned = -0.0064635 Jy ! Component: 1550 - total flux cleaned = -0.00654052 Jy ! Component: 1600 - total flux cleaned = -0.00661629 Jy ! Component: 1650 - total flux cleaned = -0.00674053 Jy ! Component: 1700 - total flux cleaned = -0.00664204 Jy ! Component: 1750 - total flux cleaned = -0.00685993 Jy ! Component: 1800 - total flux cleaned = -0.00678805 Jy ! Component: 1850 - total flux cleaned = -0.0067887 Jy ! Component: 1900 - total flux cleaned = -0.00702188 Jy ! Component: 1950 - total flux cleaned = -0.00699856 Jy ! Component: 2000 - total flux cleaned = -0.00706693 Jy ! Component: 2050 - total flux cleaned = -0.00708992 Jy ! Component: 2100 - total flux cleaned = -0.0072674 Jy ! Component: 2150 - total flux cleaned = -0.00726729 Jy ! Component: 2200 - total flux cleaned = -0.00735431 Jy ! Component: 2250 - total flux cleaned = -0.00746176 Jy ! Component: 2300 - total flux cleaned = -0.0076533 Jy ! Component: 2350 - total flux cleaned = -0.00780033 Jy ! Component: 2400 - total flux cleaned = -0.0078417 Jy ! Component: 2450 - total flux cleaned = -0.00790339 Jy ! Component: 2500 - total flux cleaned = -0.00796468 Jy ! Component: 2550 - total flux cleaned = -0.00818697 Jy ! Component: 2600 - total flux cleaned = -0.00828671 Jy ! Component: 2650 - total flux cleaned = -0.00834643 Jy ! Component: 2700 - total flux cleaned = -0.00852304 Jy ! Component: 2750 - total flux cleaned = -0.00863934 Jy ! Component: 2800 - total flux cleaned = -0.00883197 Jy ! Component: 2850 - total flux cleaned = -0.00898452 Jy ! Component: 2900 - total flux cleaned = -0.00913569 Jy ! Component: 2950 - total flux cleaned = -0.0092108 Jy ! Component: 3000 - total flux cleaned = -0.00935924 Jy ! Component: 3050 - total flux cleaned = -0.00948829 Jy ! Component: 3100 - total flux cleaned = -0.00965263 Jy ! Component: 3150 - total flux cleaned = -0.00974287 Jy ! Component: 3200 - total flux cleaned = -0.00986827 Jy ! Component: 3250 - total flux cleaned = -0.0100107 Jy ! Component: 3300 - total flux cleaned = -0.0101165 Jy ! Component: 3350 - total flux cleaned = -0.0102391 Jy ! Component: 3400 - total flux cleaned = -0.010378 Jy ! Component: 3450 - total flux cleaned = -0.0104641 Jy ! Component: 3500 - total flux cleaned = -0.010635 Jy ! Component: 3550 - total flux cleaned = -0.0108382 Jy ! Component: 3600 - total flux cleaned = -0.0109388 Jy ! Component: 3650 - total flux cleaned = -0.0110887 Jy ! Component: 3700 - total flux cleaned = -0.0112212 Jy ! Component: 3750 - total flux cleaned = -0.0112867 Jy ! Component: 3800 - total flux cleaned = -0.0113684 Jy ! Component: 3850 - total flux cleaned = -0.0114656 Jy ! Component: 3900 - total flux cleaned = -0.0116103 Jy ! Component: 3950 - total flux cleaned = -0.0116901 Jy ! Component: 4000 - total flux cleaned = -0.0117377 Jy ! Component: 4050 - total flux cleaned = -0.0118008 Jy ! Total flux subtracted in 4096 components = -0.0119103 Jy ! Clean residual min=-0.000957 max=0.000874 Jy/beam ! Clean residual mean=-0.000007 rms=0.000278 Jy/beam ! Combined flux in latest and established models = 0.383847 Jy keep ! Adding 252 model components to the UV plane model. ! The established model now contains 295 components and 0.383847 Jy ![Exited script file: muppet] wmap "J0510-3142_S_2017_08_05_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.972 x 7.521 at -1.811 degrees (North through East) ! Clean map min=-0.0018907 max=0.37216 Jy/beam ! Writing clean map to FITS file: J0510-3142_S_2017_08_05_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.372162 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000270121 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.217744 0.217744 0.435488 0.870977 1.74195 3.48391 6.96782 13.9356 27.8713 55.7425 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.372 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.972 x 7.521 at -1.811 degrees (North through East) ! Clean map min=-0.0018907 max=0.37216 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0510-3142_S_2017_08_05_pus_uvs.log closed on Thu May 9 19:21:24 2019