! Started logfile: J0510+1800_S_2017_04_28_pus_uvs.log on Thu May 2 16:17:04 2019 obs J0510+1800_S_2017_04_28_pus_uva.fits ! Reading UV FITS file: J0510+1800_S_2017_04_28_pus_uva.fits ! AN table 1: 24 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.755556 visibilities/baseline/integration-bin. ! Found source: J0510+1800 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 671 lines of history. ! ! Reading 3264 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0510+1800_S_2017_04_28_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 34 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 34 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 34 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 113 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.562773Jy sigma=0.040528 ! Fit after self-cal, rms=0.566061Jy sigma=0.040511 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.326 mas, bmaj=6.554 mas, bpa=-7.95 degrees ! Estimated noise=992.537 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.173947 Jy ! Component: 100 - total flux cleaned = 0.259256 Jy ! Total flux subtracted in 100 components = 0.259256 Jy ! Clean residual min=-0.063594 max=0.076091 Jy/beam ! Clean residual mean=-0.000093 rms=0.019439 Jy/beam ! Combined flux in latest and established models = 0.259256 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.259256 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.369217Jy sigma=0.005974 ! Fit after self-cal, rms=0.368555Jy sigma=0.005972 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.805 mas, bmaj=6.883 mas, bpa=-7.359 degrees ! Estimated noise=985.823 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0969079 Jy ! Component: 100 - total flux cleaned = 0.161683 Jy ! Component: 150 - total flux cleaned = 0.210263 Jy ! Component: 200 - total flux cleaned = 0.247401 Jy ! Total flux subtracted in 200 components = 0.247401 Jy ! Clean residual min=-0.062091 max=0.066619 Jy/beam ! Clean residual mean=-0.000073 rms=0.017918 Jy/beam ! Combined flux in latest and established models = 0.506656 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 37 components and 0.506656 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.293738Jy sigma=0.006860 ! Fit after self-cal, rms=0.292715Jy sigma=0.006859 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.56 FD 0.81 HN 0.87 KP 0.87 ! LA 0.92 MK 0.95 NL 0.92 OV 0.91 ! PT 0.97 SC 0.74 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.58 FD 0.73 HN 0.91 KP 0.84 ! LA 0.86 MK 0.92 NL 1.14 OV 0.92 ! PT 0.94 SC 0.84 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.57 FD 0.77 HN 0.90 KP 0.87 ! LA 0.89 MK 0.92 NL 1.10 OV 0.84 ! PT 0.91 SC 0.85 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 36.04 FD 0.73 HN 0.92 KP 1.00* ! LA 0.80 MK 1.31 NL 1.00* OV 1.00* ! PT 0.97 SC 1.00* ! ! ! Fit before self-cal, rms=0.292715Jy sigma=0.006859 ! Fit after self-cal, rms=2.467808Jy sigma=0.001449 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.609 mas, bmaj=7.721 mas, bpa=-7.137 degrees ! Estimated noise=1224.23 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0206878 Jy ! Component: 100 - total flux cleaned = -0.0289531 Jy ! Component: 150 - total flux cleaned = -0.0320182 Jy ! Component: 200 - total flux cleaned = -0.0335548 Jy ! Total flux subtracted in 200 components = -0.0335548 Jy ! Clean residual min=-0.015390 max=0.016261 Jy/beam ! Clean residual mean=0.000010 rms=0.003811 Jy/beam ! Combined flux in latest and established models = 0.473101 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 47 components and 0.473101 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.457869Jy sigma=0.001148 ! Fit after self-cal, rms=2.457547Jy sigma=0.001113 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.457547Jy sigma=0.001113 ! Fit after self-cal, rms=2.824823Jy sigma=0.000997 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.503 mas, bmaj=7.835 mas, bpa=-9.395 degrees ! Estimated noise=1221.17 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00995374 Jy ! Component: 100 - total flux cleaned = -0.0112457 Jy ! Component: 150 - total flux cleaned = -0.0132015 Jy ! Component: 200 - total flux cleaned = -0.0148749 Jy ! Total flux subtracted in 200 components = -0.0148749 Jy ! Clean residual min=-0.010893 max=0.011661 Jy/beam ! Clean residual mean=-0.000014 rms=0.002756 Jy/beam ! Combined flux in latest and established models = 0.458227 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 54 components and 0.458227 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.820934Jy sigma=0.000914 ! Fit after self-cal, rms=2.820952Jy sigma=0.000912 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00150453 Jy ! Component: 100 - total flux cleaned = -0.00311837 Jy ! Component: 150 - total flux cleaned = -0.0045501 Jy ! Component: 200 - total flux cleaned = -0.00583882 Jy ! Total flux subtracted in 200 components = -0.00583882 Jy ! Clean residual min=-0.008809 max=0.011691 Jy/beam ! Clean residual mean=-0.000022 rms=0.002616 Jy/beam ! Combined flux in latest and established models = 0.452388 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 59 components and 0.452388 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.819815Jy sigma=0.000893 ! Fit after self-cal, rms=2.819809Jy sigma=0.000893 ! Inverting map ! Added new window around map position (31.5, -27.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00317884 Jy ! Component: 100 - total flux cleaned = 0.000702915 Jy ! Component: 150 - total flux cleaned = -0.000683714 Jy ! Component: 200 - total flux cleaned = -0.00151267 Jy ! Total flux subtracted in 200 components = -0.00151267 Jy ! Clean residual min=-0.008980 max=0.010874 Jy/beam ! Clean residual mean=-0.000027 rms=0.002455 Jy/beam ! Combined flux in latest and established models = 0.450875 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 72 components and 0.450875 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.818624Jy sigma=0.000874 ! Fit after self-cal, rms=2.818587Jy sigma=0.000873 ! Inverting map ! Added new window around map position (-21.5, -6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.011006 Jy ! Component: 100 - total flux cleaned = 0.0142204 Jy ! Component: 150 - total flux cleaned = 0.0155495 Jy ! Component: 200 - total flux cleaned = 0.0153629 Jy ! Total flux subtracted in 200 components = 0.0153629 Jy ! Clean residual min=-0.008051 max=0.009013 Jy/beam ! Clean residual mean=-0.000021 rms=0.002266 Jy/beam ! Combined flux in latest and established models = 0.466238 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 89 components and 0.466238 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.817420Jy sigma=0.000856 ! Fit after self-cal, rms=2.817354Jy sigma=0.000855 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.817354Jy sigma=0.000855 ! Fit after self-cal, rms=0.090303Jy sigma=0.000738 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.464 mas, bmaj=7.851 mas, bpa=-9.617 degrees ! Estimated noise=1214.79 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0035786 Jy ! Component: 100 - total flux cleaned = -0.0047221 Jy ! Component: 150 - total flux cleaned = -0.00455094 Jy ! Component: 200 - total flux cleaned = -0.00454071 Jy ! Total flux subtracted in 200 components = -0.00454071 Jy ! Clean residual min=-0.006171 max=0.009969 Jy/beam ! Clean residual mean=-0.000019 rms=0.001619 Jy/beam ! Combined flux in latest and established models = 0.461697 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 103 components and 0.461697 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089212Jy sigma=0.000722 ! Fit after self-cal, rms=0.089255Jy sigma=0.000722 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-9.5, -1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00913503 Jy ! Component: 100 - total flux cleaned = 0.00969175 Jy ! Component: 150 - total flux cleaned = 0.00841222 Jy ! Component: 200 - total flux cleaned = 0.00712421 Jy ! Total flux subtracted in 200 components = 0.00712421 Jy ! Clean residual min=-0.005675 max=0.005614 Jy/beam ! Clean residual mean=-0.000015 rms=0.001375 Jy/beam ! Combined flux in latest and established models = 0.468822 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 119 components and 0.468822 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087972Jy sigma=0.000702 ! Fit after self-cal, rms=0.087905Jy sigma=0.000700 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087905Jy sigma=0.000700 ! Fit after self-cal, rms=0.089733Jy sigma=0.000696 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.59 mas, bmaj=10.32 mas, bpa=-1.5 degrees ! Estimated noise=1509.34 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0002678 Jy ! Component: 100 - total flux cleaned = -0.000534867 Jy ! Component: 150 - total flux cleaned = -0.000686574 Jy ! Component: 200 - total flux cleaned = -0.000799608 Jy ! Total flux subtracted in 200 components = -0.000799608 Jy ! Clean residual min=-0.005939 max=0.004832 Jy/beam ! Clean residual mean=-0.000024 rms=0.001430 Jy/beam ! Combined flux in latest and established models = 0.468022 Jy selfcal ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 145 components and 0.468022 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089134Jy sigma=0.000688 ! Fit after self-cal, rms=0.089094Jy sigma=0.000687 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000524353 Jy ! Component: 100 - total flux cleaned = 0.000188906 Jy ! Component: 150 - total flux cleaned = 9.74866e-05 Jy ! Component: 200 - total flux cleaned = 1.45858e-05 Jy ! Total flux subtracted in 200 components = 1.45858e-05 Jy ! Clean residual min=-0.005561 max=0.004711 Jy/beam ! Clean residual mean=-0.000024 rms=0.001353 Jy/beam ! Combined flux in latest and established models = 0.468037 Jy ! Performing phase self-cal ! Adding 46 model components to the UV plane model. ! The established model now contains 180 components and 0.468037 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088827Jy sigma=0.000684 ! Fit after self-cal, rms=0.088825Jy sigma=0.000684 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.447 mas, bmaj=7.871 mas, bpa=-9.652 degrees ! Estimated noise=1210.36 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.447 x 7.871 at -9.652 degrees (North through East) ! Clean map min=-0.0048577 max=0.32855 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.85 mas, bmaj=7.356 mas, bpa=-11.55 degrees ! Estimated noise=1460.62 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.250201 Jy ! Component: 100 - total flux cleaned = 0.325639 Jy ! Component: 150 - total flux cleaned = 0.361435 Jy ! Component: 200 - total flux cleaned = 0.381369 Jy ! Total flux subtracted in 200 components = 0.381369 Jy ! Clean residual min=-0.007973 max=0.010757 Jy/beam ! Clean residual mean=-0.000040 rms=0.002039 Jy/beam ! Combined flux in latest and established models = 0.381369 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 25 model components to the UV plane model. ! The established model now contains 25 components and 0.381369 Jy ! Inverting map and beam ! Estimated beam: bmin=3.447 mas, bmaj=7.871 mas, bpa=-9.652 degrees ! Estimated noise=1210.36 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-4, -0.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0207604 Jy ! Component: 100 - total flux cleaned = 0.0353886 Jy ! Component: 150 - total flux cleaned = 0.046557 Jy ! Component: 200 - total flux cleaned = 0.0553968 Jy ! Total flux subtracted in 200 components = 0.0553968 Jy ! Clean residual min=-0.004962 max=0.006094 Jy/beam ! Clean residual mean=-0.000037 rms=0.001401 Jy/beam ! Combined flux in latest and established models = 0.436766 Jy ! Adding 57 model components to the UV plane model. ! The established model now contains 79 components and 0.436766 Jy ! Inverting map ! Added new window around map position (22, -35). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00727325 Jy ! Component: 100 - total flux cleaned = 0.0129225 Jy ! Component: 150 - total flux cleaned = 0.0166741 Jy ! Component: 200 - total flux cleaned = 0.0189059 Jy ! Total flux subtracted in 200 components = 0.0189059 Jy ! Clean residual min=-0.004611 max=0.004477 Jy/beam ! Clean residual mean=-0.000028 rms=0.001142 Jy/beam ! Combined flux in latest and established models = 0.455672 Jy ! Adding 47 model components to the UV plane model. ! The established model now contains 111 components and 0.455672 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.59 mas, bmaj=10.32 mas, bpa=-1.5 degrees ! Estimated noise=1509.34 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00504601 Jy ! Component: 100 - total flux cleaned = 0.00673487 Jy ! Component: 150 - total flux cleaned = 0.0078324 Jy ! Component: 200 - total flux cleaned = 0.00851761 Jy ! Total flux subtracted in 200 components = 0.00851761 Jy ! Clean residual min=-0.004994 max=0.004382 Jy/beam ! Clean residual mean=-0.000041 rms=0.001329 Jy/beam ! Combined flux in latest and established models = 0.464189 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0004081 Jy ! Component: 100 - total flux cleaned = 0.000954678 Jy ! Component: 150 - total flux cleaned = 0.00136198 Jy ! Component: 200 - total flux cleaned = 0.00173367 Jy ! Total flux subtracted in 200 components = 0.00173367 Jy ! Clean residual min=-0.004666 max=0.004059 Jy/beam ! Clean residual mean=-0.000036 rms=0.001270 Jy/beam ! Combined flux in latest and established models = 0.465923 Jy ! Adding 104 model components to the UV plane model. ! The established model now contains 206 components and 0.465923 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.447 mas, bmaj=7.871 mas, bpa=-9.652 degrees ! Estimated noise=1210.36 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.66342e-05 Jy ! Component: 100 - total flux cleaned = 0.000401159 Jy ! Component: 150 - total flux cleaned = 0.000651101 Jy ! Component: 200 - total flux cleaned = 0.000806323 Jy ! Total flux subtracted in 200 components = 0.000806323 Jy ! Clean residual min=-0.004229 max=0.004114 Jy/beam ! Clean residual mean=-0.000019 rms=0.000986 Jy/beam ! Combined flux in latest and established models = 0.466729 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 235 components and 0.466729 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087869Jy sigma=0.000673 ! Fit after self-cal, rms=0.087862Jy sigma=0.000672 wmodel J0510+1800_S_2017_04_28_pus_map.mod ! Writing 235 model components to file: J0510+1800_S_2017_04_28_pus_map.mod wobs J0510+1800_S_2017_04_28_pus_uvs.fits ! Writing UV FITS file: J0510+1800_S_2017_04_28_pus_uvs.fits wwins J0510+1800_S_2017_04_28_pus_map.win ! wwins: Wrote 6 windows to J0510+1800_S_2017_04_28_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00014314 Jy ! Component: 100 - total flux cleaned = 0.000483789 Jy ! Component: 150 - total flux cleaned = 0.00119807 Jy ! Component: 200 - total flux cleaned = 0.00188118 Jy ! Component: 250 - total flux cleaned = 0.00254072 Jy ! Component: 300 - total flux cleaned = 0.00300684 Jy ! Component: 350 - total flux cleaned = 0.00351543 Jy ! Component: 400 - total flux cleaned = 0.00384558 Jy ! Component: 450 - total flux cleaned = 0.00416742 Jy ! Component: 500 - total flux cleaned = 0.00437675 Jy ! Component: 550 - total flux cleaned = 0.00447924 Jy ! Component: 600 - total flux cleaned = 0.00472998 Jy ! Component: 650 - total flux cleaned = 0.00492551 Jy ! Component: 700 - total flux cleaned = 0.00506863 Jy ! Component: 750 - total flux cleaned = 0.00516385 Jy ! Component: 800 - total flux cleaned = 0.00530267 Jy ! Component: 850 - total flux cleaned = 0.00543863 Jy ! Component: 900 - total flux cleaned = 0.0056175 Jy ! Component: 950 - total flux cleaned = 0.00588117 Jy ! Component: 1000 - total flux cleaned = 0.00592442 Jy ! Component: 1050 - total flux cleaned = 0.00613884 Jy ! Component: 1100 - total flux cleaned = 0.00639126 Jy ! Component: 1150 - total flux cleaned = 0.00651624 Jy ! Component: 1200 - total flux cleaned = 0.00676226 Jy ! Component: 1250 - total flux cleaned = 0.00676226 Jy ! Component: 1300 - total flux cleaned = 0.00696175 Jy ! Component: 1350 - total flux cleaned = 0.00692367 Jy ! Component: 1400 - total flux cleaned = 0.00707898 Jy ! Component: 1450 - total flux cleaned = 0.00692552 Jy ! Component: 1500 - total flux cleaned = 0.00696414 Jy ! Component: 1550 - total flux cleaned = 0.00696451 Jy ! Component: 1600 - total flux cleaned = 0.00692772 Jy ! Component: 1650 - total flux cleaned = 0.0068909 Jy ! Component: 1700 - total flux cleaned = 0.00681914 Jy ! Component: 1750 - total flux cleaned = 0.0068192 Jy ! Component: 1800 - total flux cleaned = 0.006784 Jy ! Component: 1850 - total flux cleaned = 0.00667868 Jy ! Component: 1900 - total flux cleaned = 0.00664341 Jy ! Component: 1950 - total flux cleaned = 0.006507 Jy ! Component: 2000 - total flux cleaned = 0.00647318 Jy ! Component: 2050 - total flux cleaned = 0.00637276 Jy ! Component: 2100 - total flux cleaned = 0.00630635 Jy ! Component: 2150 - total flux cleaned = 0.00620777 Jy ! Component: 2200 - total flux cleaned = 0.00614284 Jy ! Component: 2250 - total flux cleaned = 0.00627109 Jy ! Component: 2300 - total flux cleaned = 0.0060481 Jy ! Component: 2350 - total flux cleaned = 0.00598516 Jy ! Component: 2400 - total flux cleaned = 0.00592251 Jy ! Component: 2450 - total flux cleaned = 0.00589092 Jy ! Component: 2500 - total flux cleaned = 0.00582993 Jy ! Component: 2550 - total flux cleaned = 0.00570881 Jy ! Component: 2600 - total flux cleaned = 0.00573858 Jy ! Component: 2650 - total flux cleaned = 0.00558947 Jy ! Component: 2700 - total flux cleaned = 0.00550142 Jy ! Component: 2750 - total flux cleaned = 0.00544329 Jy ! Component: 2800 - total flux cleaned = 0.00535635 Jy ! Component: 2850 - total flux cleaned = 0.00524193 Jy ! Component: 2900 - total flux cleaned = 0.0051284 Jy ! Component: 2950 - total flux cleaned = 0.00507215 Jy ! Component: 3000 - total flux cleaned = 0.00498821 Jy ! Component: 3050 - total flux cleaned = 0.00487727 Jy ! Component: 3100 - total flux cleaned = 0.00468496 Jy ! Component: 3150 - total flux cleaned = 0.00465748 Jy ! Component: 3200 - total flux cleaned = 0.00454932 Jy ! Component: 3250 - total flux cleaned = 0.00438798 Jy ! Component: 3300 - total flux cleaned = 0.00414897 Jy ! Component: 3350 - total flux cleaned = 0.00420167 Jy ! Component: 3400 - total flux cleaned = 0.00404483 Jy ! Component: 3450 - total flux cleaned = 0.00386265 Jy ! Component: 3500 - total flux cleaned = 0.00381115 Jy ! Component: 3550 - total flux cleaned = 0.00373425 Jy ! Component: 3600 - total flux cleaned = 0.00360729 Jy ! Component: 3650 - total flux cleaned = 0.00353172 Jy ! Component: 3700 - total flux cleaned = 0.0034568 Jy ! Component: 3750 - total flux cleaned = 0.00335743 Jy ! Component: 3800 - total flux cleaned = 0.00330809 Jy ! Component: 3850 - total flux cleaned = 0.00323449 Jy ! Component: 3900 - total flux cleaned = 0.00313732 Jy ! Component: 3950 - total flux cleaned = 0.00308893 Jy ! Component: 4000 - total flux cleaned = 0.0029927 Jy ! Component: 4050 - total flux cleaned = 0.00292086 Jy ! Total flux subtracted in 4096 components = 0.00277897 Jy ! Clean residual min=-0.001440 max=0.001409 Jy/beam ! Clean residual mean=-0.000006 rms=0.000448 Jy/beam ! Combined flux in latest and established models = 0.469508 Jy keep ! Adding 304 model components to the UV plane model. ! The established model now contains 539 components and 0.469508 Jy ![Exited script file: muppet] wmap "J0510+1800_S_2017_04_28_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.447 x 7.871 at -9.652 degrees (North through East) ! Clean map min=-0.0033014 max=0.33249 Jy/beam ! Writing clean map to FITS file: J0510+1800_S_2017_04_28_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.332489 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000444238 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.400829 0.400829 0.801658 1.60332 3.20663 6.41327 12.8265 25.6531 51.3061 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0013 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.332 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.447 x 7.871 at -9.652 degrees (North through East) ! Clean map min=-0.0033014 max=0.33249 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0510+1800_S_2017_04_28_pus_uvs.log closed on Thu May 2 16:17:09 2019