! Started logfile: J0508-3308_S_2017_10_21_pus_uvs.log on Sat May 11 20:51:20 2019 obs J0508-3308_S_2017_10_21_pus_uva.fits ! Reading UV FITS file: J0508-3308_S_2017_10_21_pus_uva.fits ! AN table 1: 146 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.628615 visibilities/baseline/integration-bin. ! Found source: J0508-3308 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 644 lines of history. ! ! Reading 13216 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0508-3308_S_2017_10_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 333 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 290 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 260 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 864 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.962326Jy sigma=0.007153 ! Fit after self-cal, rms=0.929491Jy sigma=0.006941 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.609 mas, bmaj=13.63 mas, bpa=-21.54 degrees ! Estimated noise=1954.57 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0567195 Jy ! Component: 100 - total flux cleaned = 0.0694488 Jy ! Total flux subtracted in 100 components = 0.0694488 Jy ! Clean residual min=-0.006646 max=0.007451 Jy/beam ! Clean residual mean=-0.000012 rms=0.001540 Jy/beam ! Combined flux in latest and established models = 0.0694488 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.0694488 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104520Jy sigma=0.000704 ! Fit after self-cal, rms=0.104254Jy sigma=0.000703 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.385 mas, bmaj=16.19 mas, bpa=-21.23 degrees ! Estimated noise=969.33 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00693294 Jy ! Component: 100 - total flux cleaned = 0.00963833 Jy ! Component: 150 - total flux cleaned = 0.011067 Jy ! Component: 200 - total flux cleaned = 0.0118086 Jy ! Total flux subtracted in 200 components = 0.0118086 Jy ! Clean residual min=-0.003799 max=0.002864 Jy/beam ! Clean residual mean=-0.000015 rms=0.000849 Jy/beam ! Combined flux in latest and established models = 0.0812574 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 43 components and 0.0812574 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103810Jy sigma=0.000700 ! Fit after self-cal, rms=0.103781Jy sigma=0.000699 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.95 HN 0.93 KP 1.12 ! LA 1.06 MK 1.05 NL 0.91 OV 1.08 ! PT 0.95 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.11 HN 0.99 KP 1.05 ! LA 1.01 MK 1.01 NL 1.04 OV 1.03 ! PT 0.87 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.13 HN 0.96 KP 1.06 ! LA 0.88 MK 1.00 NL 1.08 OV 0.92 ! PT 0.85 ! ! ! Correcting IF 4. ! A total of 126 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.04 HN 0.84 KP 1.00* ! LA 0.86 MK 1.21 NL 1.00* OV 1.00* ! PT 0.80 ! ! ! Fit before self-cal, rms=0.103781Jy sigma=0.000699 ! Fit after self-cal, rms=0.101510Jy sigma=0.000697 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.432 mas, bmaj=16.35 mas, bpa=-21.42 degrees ! Estimated noise=978.545 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.18901e-05 Jy ! Component: 100 - total flux cleaned = 0.00011199 Jy ! Component: 150 - total flux cleaned = 0.000152557 Jy ! Component: 200 - total flux cleaned = 0.000189301 Jy ! Total flux subtracted in 200 components = 0.000189301 Jy ! Clean residual min=-0.002211 max=0.002730 Jy/beam ! Clean residual mean=0.000016 rms=0.000648 Jy/beam ! Combined flux in latest and established models = 0.0814467 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 60 components and 0.0814467 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101497Jy sigma=0.000697 ! Fit after self-cal, rms=0.101713Jy sigma=0.000697 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101713Jy sigma=0.000697 ! Fit after self-cal, rms=0.102621Jy sigma=0.000696 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.441 mas, bmaj=16.39 mas, bpa=-21.44 degrees ! Estimated noise=980.984 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000390843 Jy ! Component: 100 - total flux cleaned = 0.000408909 Jy ! Component: 150 - total flux cleaned = 0.000393566 Jy ! Component: 200 - total flux cleaned = 0.000393997 Jy ! Total flux subtracted in 200 components = 0.000393997 Jy ! Clean residual min=-0.002291 max=0.002947 Jy/beam ! Clean residual mean=0.000015 rms=0.000635 Jy/beam ! Combined flux in latest and established models = 0.0818407 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 66 components and 0.0818407 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102613Jy sigma=0.000696 ! Fit after self-cal, rms=0.102836Jy sigma=0.000696 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-48.5, -16). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00210489 Jy ! Component: 100 - total flux cleaned = 0.00232587 Jy ! Component: 150 - total flux cleaned = 0.0025569 Jy ! Component: 200 - total flux cleaned = 0.00265547 Jy ! Total flux subtracted in 200 components = 0.00265547 Jy ! Clean residual min=-0.002009 max=0.002411 Jy/beam ! Clean residual mean=0.000016 rms=0.000540 Jy/beam ! Combined flux in latest and established models = 0.0844962 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 86 components and 0.0844962 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102772Jy sigma=0.000695 ! Fit after self-cal, rms=0.102738Jy sigma=0.000695 ! Inverting map ! Added new window around map position (-90, -15.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00188987 Jy ! Component: 100 - total flux cleaned = 0.00247365 Jy ! Component: 150 - total flux cleaned = 0.00324357 Jy ! Component: 200 - total flux cleaned = 0.00396253 Jy ! Total flux subtracted in 200 components = 0.00396253 Jy ! Clean residual min=-0.001743 max=0.001833 Jy/beam ! Clean residual mean=0.000006 rms=0.000482 Jy/beam ! Combined flux in latest and established models = 0.0884587 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 110 components and 0.0884587 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102669Jy sigma=0.000695 ! Fit after self-cal, rms=0.102634Jy sigma=0.000695 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102634Jy sigma=0.000695 ! Fit after self-cal, rms=0.102680Jy sigma=0.000694 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.446 mas, bmaj=16.4 mas, bpa=-21.46 degrees ! Estimated noise=979.408 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0014137 Jy ! Component: 100 - total flux cleaned = 0.00202391 Jy ! Component: 150 - total flux cleaned = 0.0027006 Jy ! Component: 200 - total flux cleaned = 0.00332782 Jy ! Total flux subtracted in 200 components = 0.00332782 Jy ! Clean residual min=-0.001765 max=0.001798 Jy/beam ! Clean residual mean=0.000005 rms=0.000474 Jy/beam ! Combined flux in latest and established models = 0.0917865 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 123 components and 0.0917865 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102639Jy sigma=0.000694 ! Fit after self-cal, rms=0.102712Jy sigma=0.000694 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00092283 Jy ! Component: 100 - total flux cleaned = 0.00154853 Jy ! Component: 150 - total flux cleaned = 0.00203806 Jy ! Component: 200 - total flux cleaned = 0.00234302 Jy ! Total flux subtracted in 200 components = 0.00234302 Jy ! Clean residual min=-0.001795 max=0.001758 Jy/beam ! Clean residual mean=0.000003 rms=0.000464 Jy/beam ! Combined flux in latest and established models = 0.0941296 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 132 components and 0.0941296 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102687Jy sigma=0.000694 ! Fit after self-cal, rms=0.102678Jy sigma=0.000694 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102678Jy sigma=0.000694 ! Fit after self-cal, rms=0.102765Jy sigma=0.000694 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.261 mas, bmaj=32.65 mas, bpa=-9.588 degrees ! Estimated noise=1156.15 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000990784 Jy ! Component: 100 - total flux cleaned = 0.00172839 Jy ! Component: 150 - total flux cleaned = 0.00222117 Jy ! Component: 200 - total flux cleaned = 0.00260803 Jy ! Total flux subtracted in 200 components = 0.00260803 Jy ! Clean residual min=-0.001890 max=0.001469 Jy/beam ! Clean residual mean=0.000009 rms=0.000527 Jy/beam ! Combined flux in latest and established models = 0.0967376 Jy selfcal ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 160 components and 0.0967376 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102750Jy sigma=0.000694 ! Fit after self-cal, rms=0.102786Jy sigma=0.000694 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000653731 Jy ! Component: 100 - total flux cleaned = 0.00107908 Jy ! Component: 150 - total flux cleaned = 0.00139662 Jy ! Component: 200 - total flux cleaned = 0.00166294 Jy ! Total flux subtracted in 200 components = 0.00166294 Jy ! Clean residual min=-0.001889 max=0.001446 Jy/beam ! Clean residual mean=0.000006 rms=0.000515 Jy/beam ! Combined flux in latest and established models = 0.0984005 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 175 components and 0.0984005 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102777Jy sigma=0.000694 ! Fit after self-cal, rms=0.102766Jy sigma=0.000694 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.447 mas, bmaj=16.39 mas, bpa=-21.45 degrees ! Estimated noise=979.175 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.447 x 16.39 at -21.45 degrees (North through East) ! Clean map min=-0.0023669 max=0.071075 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.631 mas, bmaj=13.74 mas, bpa=-21.71 degrees ! Estimated noise=2017.79 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0563229 Jy ! Component: 100 - total flux cleaned = 0.0696312 Jy ! Component: 150 - total flux cleaned = 0.0768074 Jy ! Component: 200 - total flux cleaned = 0.0819233 Jy ! Total flux subtracted in 200 components = 0.0819233 Jy ! Clean residual min=-0.005475 max=0.004932 Jy/beam ! Clean residual mean=-0.000004 rms=0.001433 Jy/beam ! Combined flux in latest and established models = 0.0819233 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 24 model components to the UV plane model. ! The established model now contains 24 components and 0.0819233 Jy ! Inverting map and beam ! Estimated beam: bmin=3.447 mas, bmaj=16.39 mas, bpa=-21.45 degrees ! Estimated noise=979.175 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0050224 Jy ! Component: 100 - total flux cleaned = 0.00702267 Jy ! Component: 150 - total flux cleaned = 0.00832787 Jy ! Component: 200 - total flux cleaned = 0.00949463 Jy ! Total flux subtracted in 200 components = 0.00949463 Jy ! Clean residual min=-0.002128 max=0.002037 Jy/beam ! Clean residual mean=0.000002 rms=0.000573 Jy/beam ! Combined flux in latest and established models = 0.091418 Jy ! Adding 46 model components to the UV plane model. ! The established model now contains 68 components and 0.0914179 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.261 mas, bmaj=32.65 mas, bpa=-9.588 degrees ! Estimated noise=1156.15 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00199164 Jy ! Component: 100 - total flux cleaned = 0.00343154 Jy ! Component: 150 - total flux cleaned = 0.0042813 Jy ! Component: 200 - total flux cleaned = 0.00502022 Jy ! Total flux subtracted in 200 components = 0.00502022 Jy ! Clean residual min=-0.001869 max=0.001655 Jy/beam ! Clean residual mean=0.000006 rms=0.000555 Jy/beam ! Combined flux in latest and established models = 0.0964381 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000646036 Jy ! Component: 100 - total flux cleaned = 0.00121243 Jy ! Component: 150 - total flux cleaned = 0.00168523 Jy ! Component: 200 - total flux cleaned = 0.00208188 Jy ! Total flux subtracted in 200 components = 0.00208188 Jy ! Clean residual min=-0.001867 max=0.001517 Jy/beam ! Clean residual mean=0.000007 rms=0.000523 Jy/beam ! Combined flux in latest and established models = 0.09852 Jy ! Adding 68 model components to the UV plane model. ! The established model now contains 133 components and 0.09852 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.447 mas, bmaj=16.39 mas, bpa=-21.45 degrees ! Estimated noise=979.175 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000417254 Jy ! Component: 100 - total flux cleaned = 0.000416451 Jy ! Component: 150 - total flux cleaned = 0.000382705 Jy ! Component: 200 - total flux cleaned = 0.000350779 Jy ! Total flux subtracted in 200 components = 0.000350779 Jy ! Clean residual min=-0.002009 max=0.001849 Jy/beam ! Clean residual mean=0.000002 rms=0.000465 Jy/beam ! Combined flux in latest and established models = 0.0988708 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 162 components and 0.0988708 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102768Jy sigma=0.000694 ! Fit after self-cal, rms=0.102782Jy sigma=0.000694 wmodel J0508-3308_S_2017_10_21_pus_map.mod ! Writing 162 model components to file: J0508-3308_S_2017_10_21_pus_map.mod wobs J0508-3308_S_2017_10_21_pus_uvs.fits ! Writing UV FITS file: J0508-3308_S_2017_10_21_pus_uvs.fits wwins J0508-3308_S_2017_10_21_pus_map.win ! wwins: Wrote 3 windows to J0508-3308_S_2017_10_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -9.84794e-05 Jy ! Component: 100 - total flux cleaned = -0.000257726 Jy ! Component: 150 - total flux cleaned = -0.0004344 Jy ! Component: 200 - total flux cleaned = -0.000516983 Jy ! Component: 250 - total flux cleaned = -0.000543511 Jy ! Component: 300 - total flux cleaned = -0.000568103 Jy ! Component: 350 - total flux cleaned = -0.000616008 Jy ! Component: 400 - total flux cleaned = -0.000731184 Jy ! Component: 450 - total flux cleaned = -0.000842163 Jy ! Component: 500 - total flux cleaned = -0.0010155 Jy ! Component: 550 - total flux cleaned = -0.00120508 Jy ! Component: 600 - total flux cleaned = -0.0013488 Jy ! Component: 650 - total flux cleaned = -0.00150911 Jy ! Component: 700 - total flux cleaned = -0.00168493 Jy ! Component: 750 - total flux cleaned = -0.00181808 Jy ! Component: 800 - total flux cleaned = -0.00193005 Jy ! Component: 850 - total flux cleaned = -0.00209447 Jy ! Component: 900 - total flux cleaned = -0.00225524 Jy ! Component: 950 - total flux cleaned = -0.00237726 Jy ! Component: 1000 - total flux cleaned = -0.00244581 Jy ! Component: 1050 - total flux cleaned = -0.00251331 Jy ! Component: 1100 - total flux cleaned = -0.00262988 Jy ! Component: 1150 - total flux cleaned = -0.00272827 Jy ! Component: 1200 - total flux cleaned = -0.00279302 Jy ! Component: 1250 - total flux cleaned = -0.00287301 Jy ! Component: 1300 - total flux cleaned = -0.00290491 Jy ! Component: 1350 - total flux cleaned = -0.00301447 Jy ! Component: 1400 - total flux cleaned = -0.00307637 Jy ! Component: 1450 - total flux cleaned = -0.00315297 Jy ! Component: 1500 - total flux cleaned = -0.00324369 Jy ! Component: 1550 - total flux cleaned = -0.00328879 Jy ! Component: 1600 - total flux cleaned = -0.00336317 Jy ! Component: 1650 - total flux cleaned = -0.00345147 Jy ! Component: 1700 - total flux cleaned = -0.00352423 Jy ! Component: 1750 - total flux cleaned = -0.00362519 Jy ! Component: 1800 - total flux cleaned = -0.00369642 Jy ! Component: 1850 - total flux cleaned = -0.00373884 Jy ! Component: 1900 - total flux cleaned = -0.00382285 Jy ! Component: 1950 - total flux cleaned = -0.00386451 Jy ! Component: 2000 - total flux cleaned = -0.00394721 Jy ! Component: 2050 - total flux cleaned = -0.00400183 Jy ! Component: 2100 - total flux cleaned = -0.00402885 Jy ! Component: 2150 - total flux cleaned = -0.00413628 Jy ! Component: 2200 - total flux cleaned = -0.00421615 Jy ! Component: 2250 - total flux cleaned = -0.00426879 Jy ! Component: 2300 - total flux cleaned = -0.00433439 Jy ! Component: 2350 - total flux cleaned = -0.00437353 Jy ! Component: 2400 - total flux cleaned = -0.00450327 Jy ! Component: 2450 - total flux cleaned = -0.00454187 Jy ! Component: 2500 - total flux cleaned = -0.00461867 Jy ! Component: 2550 - total flux cleaned = -0.00472024 Jy ! Component: 2600 - total flux cleaned = -0.00477077 Jy ! Component: 2650 - total flux cleaned = -0.00483354 Jy ! Component: 2700 - total flux cleaned = -0.00490841 Jy ! Component: 2750 - total flux cleaned = -0.00495794 Jy ! Component: 2800 - total flux cleaned = -0.0050072 Jy ! Component: 2850 - total flux cleaned = -0.00501959 Jy ! Component: 2900 - total flux cleaned = -0.00508081 Jy ! Component: 2950 - total flux cleaned = -0.00509302 Jy ! Component: 3000 - total flux cleaned = -0.00516562 Jy ! Component: 3050 - total flux cleaned = -0.00516565 Jy ! Component: 3100 - total flux cleaned = -0.00524941 Jy ! Component: 3150 - total flux cleaned = -0.00530902 Jy ! Component: 3200 - total flux cleaned = -0.00534459 Jy ! Component: 3250 - total flux cleaned = -0.00535651 Jy ! Component: 3300 - total flux cleaned = -0.00540366 Jy ! Component: 3350 - total flux cleaned = -0.00548578 Jy ! Component: 3400 - total flux cleaned = -0.00553249 Jy ! Component: 3450 - total flux cleaned = -0.00559069 Jy ! Component: 3500 - total flux cleaned = -0.0056023 Jy ! Component: 3550 - total flux cleaned = -0.00568313 Jy ! Component: 3600 - total flux cleaned = -0.00574062 Jy ! Component: 3650 - total flux cleaned = -0.00580932 Jy ! Component: 3700 - total flux cleaned = -0.00585498 Jy ! Component: 3750 - total flux cleaned = -0.00591191 Jy ! Component: 3800 - total flux cleaned = -0.00595724 Jy ! Component: 3850 - total flux cleaned = -0.00600247 Jy ! Component: 3900 - total flux cleaned = -0.0060025 Jy ! Component: 3950 - total flux cleaned = -0.00605873 Jy ! Component: 4000 - total flux cleaned = -0.00608113 Jy ! Component: 4050 - total flux cleaned = -0.0061035 Jy ! Total flux subtracted in 4096 components = -0.0060924 Jy ! Clean residual min=-0.000679 max=0.000736 Jy/beam ! Clean residual mean=-0.000001 rms=0.000207 Jy/beam ! Combined flux in latest and established models = 0.0927784 Jy keep ! Adding 215 model components to the UV plane model. ! The established model now contains 377 components and 0.0927784 Jy ![Exited script file: muppet] wmap "J0508-3308_S_2017_10_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.447 x 16.39 at -21.45 degrees (North through East) ! Clean map min=-0.0016778 max=0.071617 Jy/beam ! Writing clean map to FITS file: J0508-3308_S_2017_10_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0716166 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000202435 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.847993 0.847993 1.69599 3.39197 6.78395 13.5679 27.1358 54.2716 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.071 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.447 x 16.39 at -21.45 degrees (North through East) ! Clean map min=-0.0016778 max=0.071617 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0508-3308_S_2017_10_21_pus_uvs.log closed on Sat May 11 20:51:25 2019