! Started logfile: J0508-3308_S_2017_10_09_pus_uvs.log on Sun May 12 13:04:41 2019 obs J0508-3308_S_2017_10_09_pus_uva.fits ! Reading UV FITS file: J0508-3308_S_2017_10_09_pus_uva.fits ! AN table 1: 73 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.474125 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0508-3308 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 496 lines of history. ! ! Reading 4984 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0508-3308_S_2017_10_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 269 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 312 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 252 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 444 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.978274Jy sigma=0.006694 ! Fit after self-cal, rms=0.927080Jy sigma=0.006380 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.564 mas, bmaj=22.58 mas, bpa=-10.74 degrees ! Estimated noise=3189.78 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0554738 Jy ! Component: 100 - total flux cleaned = 0.0679159 Jy ! Total flux subtracted in 100 components = 0.0679159 Jy ! Clean residual min=-0.007913 max=0.007960 Jy/beam ! Clean residual mean=-0.000039 rms=0.002288 Jy/beam ! Combined flux in latest and established models = 0.0679159 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.0679159 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101618Jy sigma=0.000620 ! Fit after self-cal, rms=0.100983Jy sigma=0.000615 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.004 mas, bmaj=31.79 mas, bpa=-11.26 degrees ! Estimated noise=2033.63 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00954612 Jy ! Component: 100 - total flux cleaned = 0.0141353 Jy ! Component: 150 - total flux cleaned = 0.016495 Jy ! Component: 200 - total flux cleaned = 0.0175356 Jy ! Total flux subtracted in 200 components = 0.0175356 Jy ! Clean residual min=-0.006243 max=0.006437 Jy/beam ! Clean residual mean=-0.000083 rms=0.001700 Jy/beam ! Combined flux in latest and established models = 0.0854515 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 39 components and 0.0854515 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099928Jy sigma=0.000611 ! Fit after self-cal, rms=0.099644Jy sigma=0.000610 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.03 HN 1.00* KP 1.09 ! LA 1.14 MK 1.06 NL 0.91 OV 1.00* ! PT 1.03 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.06 HN 1.00* KP 0.99 ! LA 0.90 MK 1.09 NL 0.95 OV 1.00* ! PT 1.05 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.99 HN 1.00* KP 0.94 ! LA 0.78 MK 1.08 NL 1.14 OV 1.00* ! PT 0.98 ! ! ! Correcting IF 4. ! A total of 213 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* ! ! ! Fit before self-cal, rms=0.099644Jy sigma=0.000610 ! Fit after self-cal, rms=0.097854Jy sigma=0.000604 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.201 mas, bmaj=30.9 mas, bpa=-11.33 degrees ! Estimated noise=2173.57 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000832115 Jy ! Component: 100 - total flux cleaned = 0.000873624 Jy ! Component: 150 - total flux cleaned = 0.000908574 Jy ! Component: 200 - total flux cleaned = 0.000875669 Jy ! Total flux subtracted in 200 components = 0.000875669 Jy ! Clean residual min=-0.004287 max=0.004436 Jy/beam ! Clean residual mean=-0.000031 rms=0.001131 Jy/beam ! Combined flux in latest and established models = 0.0863272 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 49 components and 0.0863272 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097823Jy sigma=0.000604 ! Fit after self-cal, rms=0.097613Jy sigma=0.000603 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097613Jy sigma=0.000603 ! Fit after self-cal, rms=0.097261Jy sigma=0.000603 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.215 mas, bmaj=30.55 mas, bpa=-11.31 degrees ! Estimated noise=2172.39 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000765939 Jy ! Component: 100 - total flux cleaned = 0.000800126 Jy ! Component: 150 - total flux cleaned = 0.000799325 Jy ! Component: 200 - total flux cleaned = 0.000798225 Jy ! Total flux subtracted in 200 components = 0.000798225 Jy ! Clean residual min=-0.004000 max=0.004447 Jy/beam ! Clean residual mean=-0.000028 rms=0.001093 Jy/beam ! Combined flux in latest and established models = 0.0871254 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 59 components and 0.0871254 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097239Jy sigma=0.000603 ! Fit after self-cal, rms=0.097220Jy sigma=0.000603 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000192587 Jy ! Component: 100 - total flux cleaned = 0.000192702 Jy ! Component: 150 - total flux cleaned = 0.000192062 Jy ! Component: 200 - total flux cleaned = 0.000191826 Jy ! Total flux subtracted in 200 components = 0.000191826 Jy ! Clean residual min=-0.004064 max=0.004295 Jy/beam ! Clean residual mean=-0.000030 rms=0.001107 Jy/beam ! Combined flux in latest and established models = 0.0873172 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 65 components and 0.0873172 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097207Jy sigma=0.000603 ! Fit after self-cal, rms=0.097207Jy sigma=0.000603 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097207Jy sigma=0.000603 ! Fit after self-cal, rms=0.096990Jy sigma=0.000603 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.208 mas, bmaj=30.4 mas, bpa=-11.29 degrees ! Estimated noise=2170.47 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000489749 Jy ! Component: 100 - total flux cleaned = 0.000514042 Jy ! Component: 150 - total flux cleaned = 0.000511532 Jy ! Component: 200 - total flux cleaned = 0.000509454 Jy ! Total flux subtracted in 200 components = 0.000509454 Jy ! Clean residual min=-0.003995 max=0.004147 Jy/beam ! Clean residual mean=-0.000026 rms=0.001082 Jy/beam ! Combined flux in latest and established models = 0.0878267 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 74 components and 0.0878267 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096976Jy sigma=0.000603 ! Fit after self-cal, rms=0.096972Jy sigma=0.000602 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.94889e-05 Jy ! Component: 100 - total flux cleaned = 6.00602e-05 Jy ! Component: 150 - total flux cleaned = 5.93126e-05 Jy ! Component: 200 - total flux cleaned = 5.96189e-05 Jy ! Total flux subtracted in 200 components = 5.96189e-05 Jy ! Clean residual min=-0.004015 max=0.004141 Jy/beam ! Clean residual mean=-0.000026 rms=0.001086 Jy/beam ! Combined flux in latest and established models = 0.0878863 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 76 components and 0.0878863 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096963Jy sigma=0.000602 ! Fit after self-cal, rms=0.096964Jy sigma=0.000602 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096964Jy sigma=0.000602 ! Fit after self-cal, rms=0.096665Jy sigma=0.000602 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=10.63 mas, bmaj=37.18 mas, bpa=0.8257 degrees ! Estimated noise=2775.3 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000215007 Jy ! Component: 100 - total flux cleaned = 0.000137285 Jy ! Component: 150 - total flux cleaned = 8.56636e-05 Jy ! Component: 200 - total flux cleaned = 3.74647e-05 Jy ! Total flux subtracted in 200 components = 3.74647e-05 Jy ! Clean residual min=-0.004390 max=0.004458 Jy/beam ! Clean residual mean=-0.000048 rms=0.001418 Jy/beam ! Combined flux in latest and established models = 0.0879238 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 80 components and 0.0879238 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096664Jy sigma=0.000602 ! Fit after self-cal, rms=0.096652Jy sigma=0.000602 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.81264e-05 Jy ! Component: 100 - total flux cleaned = 1.88563e-05 Jy ! Component: 150 - total flux cleaned = -4.05994e-05 Jy ! Component: 200 - total flux cleaned = -5.45087e-05 Jy ! Total flux subtracted in 200 components = -5.45087e-05 Jy ! Clean residual min=-0.004413 max=0.004453 Jy/beam ! Clean residual mean=-0.000050 rms=0.001422 Jy/beam ! Combined flux in latest and established models = 0.0878693 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 81 components and 0.0878693 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096652Jy sigma=0.000602 ! Fit after self-cal, rms=0.096648Jy sigma=0.000602 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.201 mas, bmaj=30.31 mas, bpa=-11.28 degrees ! Estimated noise=2166.84 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.201 x 30.31 at -11.28 degrees (North through East) ! Clean map min=-0.003917 max=0.078424 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.665 mas, bmaj=21.45 mas, bpa=-10.86 degrees ! Estimated noise=3373.76 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0562228 Jy ! Component: 100 - total flux cleaned = 0.070027 Jy ! Component: 150 - total flux cleaned = 0.0770361 Jy ! Component: 200 - total flux cleaned = 0.08147 Jy ! Total flux subtracted in 200 components = 0.08147 Jy ! Clean residual min=-0.006578 max=0.004953 Jy/beam ! Clean residual mean=-0.000011 rms=0.001468 Jy/beam ! Combined flux in latest and established models = 0.08147 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 24 model components to the UV plane model. ! The established model now contains 24 components and 0.08147 Jy ! Inverting map and beam ! Estimated beam: bmin=3.201 mas, bmaj=30.31 mas, bpa=-11.28 degrees ! Estimated noise=2166.84 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00402229 Jy ! Component: 100 - total flux cleaned = 0.00592303 Jy ! Component: 150 - total flux cleaned = 0.00653414 Jy ! Component: 200 - total flux cleaned = 0.00662965 Jy ! Total flux subtracted in 200 components = 0.00662965 Jy ! Clean residual min=-0.004011 max=0.004129 Jy/beam ! Clean residual mean=-0.000025 rms=0.001099 Jy/beam ! Combined flux in latest and established models = 0.0880996 Jy ! Adding 44 model components to the UV plane model. ! The established model now contains 62 components and 0.0880996 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=10.63 mas, bmaj=37.18 mas, bpa=0.8257 degrees ! Estimated noise=2775.3 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000225427 Jy ! Component: 100 - total flux cleaned = 0.00022506 Jy ! Component: 150 - total flux cleaned = 0.000190699 Jy ! Component: 200 - total flux cleaned = 0.000173709 Jy ! Total flux subtracted in 200 components = 0.000173709 Jy ! Clean residual min=-0.004434 max=0.004519 Jy/beam ! Clean residual mean=-0.000045 rms=0.001434 Jy/beam ! Combined flux in latest and established models = 0.0882733 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.1703e-05 Jy ! Component: 100 - total flux cleaned = -6.28385e-05 Jy ! Component: 150 - total flux cleaned = -9.29886e-05 Jy ! Component: 200 - total flux cleaned = -0.000108158 Jy ! Total flux subtracted in 200 components = -0.000108158 Jy ! Clean residual min=-0.004425 max=0.004485 Jy/beam ! Clean residual mean=-0.000046 rms=0.001430 Jy/beam ! Combined flux in latest and established models = 0.0881652 Jy ! Adding 11 model components to the UV plane model. ! The established model now contains 72 components and 0.0881652 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.201 mas, bmaj=30.31 mas, bpa=-11.28 degrees ! Estimated noise=2166.84 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.11678e-05 Jy ! Component: 100 - total flux cleaned = -5.63394e-05 Jy ! Component: 150 - total flux cleaned = -5.62744e-05 Jy ! Component: 200 - total flux cleaned = -5.51167e-05 Jy ! Total flux subtracted in 200 components = -5.51167e-05 Jy ! Clean residual min=-0.003931 max=0.004047 Jy/beam ! Clean residual mean=-0.000026 rms=0.001089 Jy/beam ! Combined flux in latest and established models = 0.0881101 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 84 components and 0.0881101 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096645Jy sigma=0.000602 ! Fit after self-cal, rms=0.096661Jy sigma=0.000602 wmodel J0508-3308_S_2017_10_09_pus_map.mod ! Writing 84 model components to file: J0508-3308_S_2017_10_09_pus_map.mod wobs J0508-3308_S_2017_10_09_pus_uvs.fits ! Writing UV FITS file: J0508-3308_S_2017_10_09_pus_uvs.fits wwins J0508-3308_S_2017_10_09_pus_map.win ! wwins: Wrote 1 windows to J0508-3308_S_2017_10_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000203831 Jy ! Component: 100 - total flux cleaned = -0.000856171 Jy ! Component: 150 - total flux cleaned = -0.00132025 Jy ! Component: 200 - total flux cleaned = -0.00183044 Jy ! Component: 250 - total flux cleaned = -0.00225689 Jy ! Component: 300 - total flux cleaned = -0.00269007 Jy ! Component: 350 - total flux cleaned = -0.0029853 Jy ! Component: 400 - total flux cleaned = -0.00323029 Jy ! Component: 450 - total flux cleaned = -0.00339778 Jy ! Component: 500 - total flux cleaned = -0.00346138 Jy ! Component: 550 - total flux cleaned = -0.00355349 Jy ! Component: 600 - total flux cleaned = -0.00361279 Jy ! Component: 650 - total flux cleaned = -0.0036995 Jy ! Component: 700 - total flux cleaned = -0.00381382 Jy ! Component: 750 - total flux cleaned = -0.00395474 Jy ! Component: 800 - total flux cleaned = -0.0041508 Jy ! Component: 850 - total flux cleaned = -0.00428967 Jy ! Component: 900 - total flux cleaned = -0.00445552 Jy ! Component: 950 - total flux cleaned = -0.00459356 Jy ! Component: 1000 - total flux cleaned = -0.00470373 Jy ! Component: 1050 - total flux cleaned = -0.0048706 Jy ! Component: 1100 - total flux cleaned = -0.00498271 Jy ! Component: 1150 - total flux cleaned = -0.00509557 Jy ! Component: 1200 - total flux cleaned = -0.0052666 Jy ! Component: 1250 - total flux cleaned = -0.00541056 Jy ! Component: 1300 - total flux cleaned = -0.00558732 Jy ! Component: 1350 - total flux cleaned = -0.00555757 Jy ! Component: 1400 - total flux cleaned = -0.00555737 Jy ! Component: 1450 - total flux cleaned = -0.00555753 Jy ! Component: 1500 - total flux cleaned = -0.0055577 Jy ! Component: 1550 - total flux cleaned = -0.00555853 Jy ! Component: 1600 - total flux cleaned = -0.0055935 Jy ! Component: 1650 - total flux cleaned = -0.00559297 Jy ! Component: 1700 - total flux cleaned = -0.00559261 Jy ! Component: 1750 - total flux cleaned = -0.00563014 Jy ! Component: 1800 - total flux cleaned = -0.00566859 Jy ! Component: 1850 - total flux cleaned = -0.00566893 Jy ! Component: 1900 - total flux cleaned = -0.00570956 Jy ! Component: 1950 - total flux cleaned = -0.00575153 Jy ! Component: 2000 - total flux cleaned = -0.00583936 Jy ! Component: 2050 - total flux cleaned = -0.00588585 Jy ! Component: 2100 - total flux cleaned = -0.00593297 Jy ! Component: 2150 - total flux cleaned = -0.00598214 Jy ! Component: 2200 - total flux cleaned = -0.00608238 Jy ! Component: 2250 - total flux cleaned = -0.00613411 Jy ! Component: 2300 - total flux cleaned = -0.00624108 Jy ! Component: 2350 - total flux cleaned = -0.00640849 Jy ! Component: 2400 - total flux cleaned = -0.00646848 Jy ! Component: 2450 - total flux cleaned = -0.006587 Jy ! Component: 2500 - total flux cleaned = -0.00671113 Jy ! Component: 2550 - total flux cleaned = -0.00677593 Jy ! Component: 2600 - total flux cleaned = -0.00697627 Jy ! Component: 2650 - total flux cleaned = -0.0070465 Jy ! Component: 2700 - total flux cleaned = -0.00718908 Jy ! Component: 2750 - total flux cleaned = -0.00733809 Jy ! Component: 2800 - total flux cleaned = -0.00749104 Jy ! Component: 2850 - total flux cleaned = -0.00765137 Jy ! Component: 2900 - total flux cleaned = -0.00781734 Jy ! Component: 2950 - total flux cleaned = -0.00790237 Jy ! Component: 3000 - total flux cleaned = -0.00816771 Jy ! Component: 3050 - total flux cleaned = -0.00825998 Jy ! Component: 3100 - total flux cleaned = -0.00844833 Jy ! Component: 3150 - total flux cleaned = -0.00874368 Jy ! Component: 3200 - total flux cleaned = -0.00894907 Jy ! Component: 3250 - total flux cleaned = -0.00905493 Jy ! Component: 3300 - total flux cleaned = -0.00927222 Jy ! Component: 3350 - total flux cleaned = -0.00949795 Jy ! Component: 3400 - total flux cleaned = -0.00973197 Jy ! Component: 3450 - total flux cleaned = -0.00997367 Jy ! Component: 3500 - total flux cleaned = -0.0103518 Jy ! Component: 3550 - total flux cleaned = -0.0106161 Jy ! Component: 3600 - total flux cleaned = -0.0108881 Jy ! Component: 3650 - total flux cleaned = -0.0111703 Jy ! Component: 3700 - total flux cleaned = -0.0114618 Jy ! Component: 3750 - total flux cleaned = -0.0117611 Jy ! Component: 3800 - total flux cleaned = -0.0120727 Jy ! Component: 3850 - total flux cleaned = -0.0125586 Jy ! Component: 3900 - total flux cleaned = -0.0127298 Jy ! Component: 3950 - total flux cleaned = -0.013076 Jy ! Component: 4000 - total flux cleaned = -0.0134357 Jy ! Component: 4050 - total flux cleaned = -0.0138085 Jy ! Total flux subtracted in 4096 components = -0.0143883 Jy ! Clean residual min=-0.011399 max=0.010713 Jy/beam ! Clean residual mean=-0.000028 rms=0.002958 Jy/beam ! Combined flux in latest and established models = 0.0737218 Jy keep ! Adding 139 model components to the UV plane model. ! The established model now contains 223 components and 0.0737218 Jy ![Exited script file: muppet] wmap "J0508-3308_S_2017_10_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.201 x 30.31 at -11.28 degrees (North through East) ! Clean map min=-0.021842 max=0.075062 Jy/beam ! Writing clean map to FITS file: J0508-3308_S_2017_10_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0750622 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00329177 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -13.1562 13.1562 26.3123 52.6246 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0098 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.075 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.201 x 30.31 at -11.28 degrees (North through East) ! Clean map min=-0.021842 max=0.075062 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0508-3308_S_2017_10_09_pus_uvs.log closed on Sun May 12 13:04:46 2019