! Started logfile: J0508+8432_S_2017_10_09_pus_uvs.log on Sun May 12 13:04:46 2019 obs J0508+8432_S_2017_10_09_pus_uva.fits ! Reading UV FITS file: J0508+8432_S_2017_10_09_pus_uva.fits ! AN table 1: 26 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.684829 visibilities/baseline/integration-bin. ! Found source: J0508+8432 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 496 lines of history. ! ! Reading 2564 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0508+8432_S_2017_10_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 40 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 53 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 40 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 120 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.794840Jy sigma=0.006419 ! Fit after self-cal, rms=0.791173Jy sigma=0.006392 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.83 mas, bmaj=5.072 mas, bpa=-1.684 degrees ! Estimated noise=2263.43 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.160176 Jy ! Component: 100 - total flux cleaned = 0.195545 Jy ! Total flux subtracted in 100 components = 0.195545 Jy ! Clean residual min=-0.008443 max=0.011781 Jy/beam ! Clean residual mean=-0.000054 rms=0.002264 Jy/beam ! Combined flux in latest and established models = 0.195545 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.195545 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099232Jy sigma=0.000728 ! Fit after self-cal, rms=0.099228Jy sigma=0.000728 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.434 mas, bmaj=5.955 mas, bpa=-0.4315 degrees ! Estimated noise=1971.77 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0171479 Jy ! Component: 100 - total flux cleaned = 0.025025 Jy ! Component: 150 - total flux cleaned = 0.0291322 Jy ! Component: 200 - total flux cleaned = 0.031439 Jy ! Total flux subtracted in 200 components = 0.031439 Jy ! Clean residual min=-0.006816 max=0.007282 Jy/beam ! Clean residual mean=-0.000093 rms=0.001898 Jy/beam ! Combined flux in latest and established models = 0.226984 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 31 components and 0.226984 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095882Jy sigma=0.000709 ! Fit after self-cal, rms=0.095852Jy sigma=0.000709 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.04 HN 1.00 KP 1.09 ! LA 1.00 MK 1.00 NL 0.84 OV 1.00* ! PT 0.97 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.05 HN 1.05 KP 1.02 ! LA 1.00 MK 0.98 NL 2.07 OV 1.00* ! PT 0.97 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 1.05 HN 1.02 KP 0.89 ! LA 0.80 MK 0.98 NL 1.09 OV 1.00* ! PT 0.99 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.14 HN 1.02 KP 1.00* ! LA 0.78 MK 1.08 NL 1.00* OV 1.00* ! PT 0.95 ! ! ! Fit before self-cal, rms=0.095852Jy sigma=0.000709 ! Fit after self-cal, rms=0.089431Jy sigma=0.000661 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.456 mas, bmaj=5.982 mas, bpa=-0.9659 degrees ! Estimated noise=1973.6 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000624364 Jy ! Component: 100 - total flux cleaned = 0.00066351 Jy ! Component: 150 - total flux cleaned = 0.000594759 Jy ! Component: 200 - total flux cleaned = 0.00056556 Jy ! Total flux subtracted in 200 components = 0.00056556 Jy ! Clean residual min=-0.004434 max=0.004818 Jy/beam ! Clean residual mean=0.000005 rms=0.001150 Jy/beam ! Combined flux in latest and established models = 0.227549 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 46 components and 0.227549 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089398Jy sigma=0.000661 ! Fit after self-cal, rms=0.089493Jy sigma=0.000661 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089493Jy sigma=0.000661 ! Fit after self-cal, rms=0.089537Jy sigma=0.000659 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.453 mas, bmaj=5.985 mas, bpa=-0.678 degrees ! Estimated noise=1974.08 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.63458e-05 Jy ! Component: 100 - total flux cleaned = 4.9806e-05 Jy ! Component: 150 - total flux cleaned = 7.012e-05 Jy ! Component: 200 - total flux cleaned = 7.08728e-05 Jy ! Total flux subtracted in 200 components = 7.08728e-05 Jy ! Clean residual min=-0.004391 max=0.004479 Jy/beam ! Clean residual mean=-0.000009 rms=0.001106 Jy/beam ! Combined flux in latest and established models = 0.22762 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 52 components and 0.22762 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089527Jy sigma=0.000659 ! Fit after self-cal, rms=0.089539Jy sigma=0.000659 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.76034e-05 Jy ! Component: 100 - total flux cleaned = -6.71956e-06 Jy ! Component: 150 - total flux cleaned = 1.01711e-05 Jy ! Component: 200 - total flux cleaned = 9.75753e-06 Jy ! Total flux subtracted in 200 components = 9.75753e-06 Jy ! Clean residual min=-0.004374 max=0.004426 Jy/beam ! Clean residual mean=-0.000009 rms=0.001102 Jy/beam ! Combined flux in latest and established models = 0.22763 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 53 components and 0.22763 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089532Jy sigma=0.000659 ! Fit after self-cal, rms=0.089531Jy sigma=0.000659 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089531Jy sigma=0.000659 ! Fit after self-cal, rms=0.089612Jy sigma=0.000659 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.455 mas, bmaj=5.986 mas, bpa=-0.6066 degrees ! Estimated noise=1976.31 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.80832e-05 Jy ! Component: 100 - total flux cleaned = 0.000104478 Jy ! Component: 150 - total flux cleaned = 0.00012014 Jy ! Component: 200 - total flux cleaned = 0.000119878 Jy ! Total flux subtracted in 200 components = 0.000119878 Jy ! Clean residual min=-0.004333 max=0.004398 Jy/beam ! Clean residual mean=-0.000008 rms=0.001099 Jy/beam ! Combined flux in latest and established models = 0.22775 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 55 components and 0.22775 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089605Jy sigma=0.000659 ! Fit after self-cal, rms=0.089606Jy sigma=0.000659 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.07322e-05 Jy ! Component: 100 - total flux cleaned = -2.06224e-05 Jy ! Component: 150 - total flux cleaned = -2.09821e-05 Jy ! Component: 200 - total flux cleaned = -8.13867e-06 Jy ! Total flux subtracted in 200 components = -8.13867e-06 Jy ! Clean residual min=-0.004326 max=0.004404 Jy/beam ! Clean residual mean=-0.000008 rms=0.001097 Jy/beam ! Combined flux in latest and established models = 0.227742 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 56 components and 0.227742 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089601Jy sigma=0.000659 ! Fit after self-cal, rms=0.089602Jy sigma=0.000659 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089602Jy sigma=0.000659 ! Fit after self-cal, rms=0.089675Jy sigma=0.000659 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.403 mas, bmaj=11.32 mas, bpa=-7.056 degrees ! Estimated noise=2529.37 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000711325 Jy ! Component: 100 - total flux cleaned = 0.00068805 Jy ! Component: 150 - total flux cleaned = 0.000687092 Jy ! Component: 200 - total flux cleaned = 0.000706431 Jy ! Total flux subtracted in 200 components = 0.000706431 Jy ! Clean residual min=-0.004819 max=0.004889 Jy/beam ! Clean residual mean=-0.000013 rms=0.001427 Jy/beam ! Combined flux in latest and established models = 0.228448 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 60 components and 0.228448 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089677Jy sigma=0.000659 ! Fit after self-cal, rms=0.089669Jy sigma=0.000658 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000222046 Jy ! Component: 100 - total flux cleaned = 0.000182046 Jy ! Component: 150 - total flux cleaned = 0.000180674 Jy ! Component: 200 - total flux cleaned = 0.000194541 Jy ! Total flux subtracted in 200 components = 0.000194541 Jy ! Clean residual min=-0.004792 max=0.004868 Jy/beam ! Clean residual mean=-0.000013 rms=0.001420 Jy/beam ! Combined flux in latest and established models = 0.228643 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 65 components and 0.228643 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089676Jy sigma=0.000659 ! Fit after self-cal, rms=0.089672Jy sigma=0.000659 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.456 mas, bmaj=5.986 mas, bpa=-0.557 degrees ! Estimated noise=1978.1 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.456 x 5.986 at -0.557 degrees (North through East) ! Clean map min=-0.0040043 max=0.20876 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.845 mas, bmaj=5.1 mas, bpa=-1.684 degrees ! Estimated noise=2289.76 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.161574 Jy ! Component: 100 - total flux cleaned = 0.197181 Jy ! Component: 150 - total flux cleaned = 0.209649 Jy ! Component: 200 - total flux cleaned = 0.216806 Jy ! Total flux subtracted in 200 components = 0.216806 Jy ! Clean residual min=-0.005394 max=0.005193 Jy/beam ! Clean residual mean=-0.000010 rms=0.001394 Jy/beam ! Combined flux in latest and established models = 0.216806 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 28 model components to the UV plane model. ! The established model now contains 28 components and 0.216806 Jy ! Inverting map and beam ! Estimated beam: bmin=3.456 mas, bmaj=5.986 mas, bpa=-0.557 degrees ! Estimated noise=1978.1 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00587615 Jy ! Component: 100 - total flux cleaned = 0.00886804 Jy ! Component: 150 - total flux cleaned = 0.00999936 Jy ! Component: 200 - total flux cleaned = 0.0102885 Jy ! Total flux subtracted in 200 components = 0.0102885 Jy ! Clean residual min=-0.004256 max=0.004498 Jy/beam ! Clean residual mean=-0.000009 rms=0.001111 Jy/beam ! Combined flux in latest and established models = 0.227094 Jy ! Adding 32 model components to the UV plane model. ! The established model now contains 48 components and 0.227094 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.403 mas, bmaj=11.32 mas, bpa=-7.056 degrees ! Estimated noise=2529.37 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00131233 Jy ! Component: 100 - total flux cleaned = 0.00137202 Jy ! Component: 150 - total flux cleaned = 0.00139542 Jy ! Component: 200 - total flux cleaned = 0.00145075 Jy ! Total flux subtracted in 200 components = 0.00145075 Jy ! Clean residual min=-0.004786 max=0.004890 Jy/beam ! Clean residual mean=-0.000013 rms=0.001426 Jy/beam ! Combined flux in latest and established models = 0.228545 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.85236e-05 Jy ! Component: 100 - total flux cleaned = 9.20117e-05 Jy ! Component: 150 - total flux cleaned = 0.000131418 Jy ! Component: 200 - total flux cleaned = 0.000155537 Jy ! Total flux subtracted in 200 components = 0.000155537 Jy ! Clean residual min=-0.004768 max=0.004880 Jy/beam ! Clean residual mean=-0.000012 rms=0.001422 Jy/beam ! Combined flux in latest and established models = 0.2287 Jy ! Adding 8 model components to the UV plane model. ! The established model now contains 53 components and 0.2287 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.456 mas, bmaj=5.986 mas, bpa=-0.557 degrees ! Estimated noise=1978.1 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000717168 Jy ! Component: 100 - total flux cleaned = -0.000677421 Jy ! Component: 150 - total flux cleaned = -0.000704423 Jy ! Component: 200 - total flux cleaned = -0.000729458 Jy ! Total flux subtracted in 200 components = -0.000729458 Jy ! Clean residual min=-0.004118 max=0.004405 Jy/beam ! Clean residual mean=-0.000008 rms=0.001099 Jy/beam ! Combined flux in latest and established models = 0.227971 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 59 components and 0.227971 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089674Jy sigma=0.000659 ! Fit after self-cal, rms=0.089671Jy sigma=0.000659 wmodel J0508+8432_S_2017_10_09_pus_map.mod ! Writing 59 model components to file: J0508+8432_S_2017_10_09_pus_map.mod wobs J0508+8432_S_2017_10_09_pus_uvs.fits ! Writing UV FITS file: J0508+8432_S_2017_10_09_pus_uvs.fits wwins J0508+8432_S_2017_10_09_pus_map.win ! wwins: Wrote 1 windows to J0508+8432_S_2017_10_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00116626 Jy ! Component: 100 - total flux cleaned = 0.00139386 Jy ! Component: 150 - total flux cleaned = 0.00132365 Jy ! Component: 200 - total flux cleaned = 0.00132294 Jy ! Component: 250 - total flux cleaned = 0.00113901 Jy ! Component: 300 - total flux cleaned = 0.00108113 Jy ! Component: 350 - total flux cleaned = 0.00102228 Jy ! Component: 400 - total flux cleaned = 0.00118477 Jy ! Component: 450 - total flux cleaned = 0.00102371 Jy ! Component: 500 - total flux cleaned = 0.000819011 Jy ! Component: 550 - total flux cleaned = 0.000671419 Jy ! Component: 600 - total flux cleaned = 0.000525786 Jy ! Component: 650 - total flux cleaned = 0.00024315 Jy ! Component: 700 - total flux cleaned = 0.000197457 Jy ! Component: 750 - total flux cleaned = 0.000198805 Jy ! Component: 800 - total flux cleaned = 0.000286953 Jy ! Component: 850 - total flux cleaned = 0.000288055 Jy ! Component: 900 - total flux cleaned = 0.000538834 Jy ! Component: 950 - total flux cleaned = 0.000497964 Jy ! Component: 1000 - total flux cleaned = 0.000659572 Jy ! Component: 1050 - total flux cleaned = 0.000738517 Jy ! Component: 1100 - total flux cleaned = 0.000738948 Jy ! Component: 1150 - total flux cleaned = 0.000815234 Jy ! Component: 1200 - total flux cleaned = 0.000852438 Jy ! Component: 1250 - total flux cleaned = 0.000925266 Jy ! Component: 1300 - total flux cleaned = 0.000924721 Jy ! Component: 1350 - total flux cleaned = 0.000853615 Jy ! Component: 1400 - total flux cleaned = 0.000853506 Jy ! Component: 1450 - total flux cleaned = 0.000785059 Jy ! Component: 1500 - total flux cleaned = 0.000650478 Jy ! Component: 1550 - total flux cleaned = 0.000618036 Jy ! Component: 1600 - total flux cleaned = 0.000519612 Jy ! Component: 1650 - total flux cleaned = 0.00038991 Jy ! Component: 1700 - total flux cleaned = 0.00026234 Jy ! Component: 1750 - total flux cleaned = 7.34336e-05 Jy ! Component: 1800 - total flux cleaned = -5.07453e-05 Jy ! Component: 1850 - total flux cleaned = -0.000234403 Jy ! Component: 1900 - total flux cleaned = -0.000294403 Jy ! Component: 1950 - total flux cleaned = -0.000383745 Jy ! Component: 2000 - total flux cleaned = -0.000471812 Jy ! Component: 2050 - total flux cleaned = -0.000501013 Jy ! Component: 2100 - total flux cleaned = -0.000644659 Jy ! Component: 2150 - total flux cleaned = -0.000672789 Jy ! Component: 2200 - total flux cleaned = -0.000757329 Jy ! Component: 2250 - total flux cleaned = -0.000757191 Jy ! Component: 2300 - total flux cleaned = -0.000840122 Jy ! Component: 2350 - total flux cleaned = -0.000949064 Jy ! Component: 2400 - total flux cleaned = -0.00100268 Jy ! Component: 2450 - total flux cleaned = -0.00102906 Jy ! Component: 2500 - total flux cleaned = -0.00110846 Jy ! Component: 2550 - total flux cleaned = -0.0011871 Jy ! Component: 2600 - total flux cleaned = -0.00123901 Jy ! Component: 2650 - total flux cleaned = -0.0013163 Jy ! Component: 2700 - total flux cleaned = -0.00139318 Jy ! Component: 2750 - total flux cleaned = -0.00144398 Jy ! Component: 2800 - total flux cleaned = -0.00146924 Jy ! Component: 2850 - total flux cleaned = -0.00159383 Jy ! Component: 2900 - total flux cleaned = -0.0016681 Jy ! Component: 2950 - total flux cleaned = -0.00174151 Jy ! Component: 3000 - total flux cleaned = -0.00179018 Jy ! Component: 3050 - total flux cleaned = -0.00183852 Jy ! Component: 3100 - total flux cleaned = -0.00191072 Jy ! Component: 3150 - total flux cleaned = -0.00198239 Jy ! Component: 3200 - total flux cleaned = -0.00195852 Jy ! Component: 3250 - total flux cleaned = -0.00207656 Jy ! Component: 3300 - total flux cleaned = -0.0021702 Jy ! Component: 3350 - total flux cleaned = -0.00217016 Jy ! Component: 3400 - total flux cleaned = -0.0021934 Jy ! Component: 3450 - total flux cleaned = -0.00223954 Jy ! Component: 3500 - total flux cleaned = -0.00223964 Jy ! Component: 3550 - total flux cleaned = -0.00233103 Jy ! Component: 3600 - total flux cleaned = -0.00239917 Jy ! Component: 3650 - total flux cleaned = -0.00242175 Jy ! Component: 3700 - total flux cleaned = -0.00239934 Jy ! Component: 3750 - total flux cleaned = -0.0023994 Jy ! Component: 3800 - total flux cleaned = -0.00242165 Jy ! Component: 3850 - total flux cleaned = -0.00244381 Jy ! Component: 3900 - total flux cleaned = -0.00244377 Jy ! Component: 3950 - total flux cleaned = -0.00250978 Jy ! Component: 4000 - total flux cleaned = -0.00250966 Jy ! Component: 4050 - total flux cleaned = -0.00253155 Jy ! Total flux subtracted in 4096 components = -0.00253162 Jy ! Clean residual min=-0.001128 max=0.001400 Jy/beam ! Clean residual mean=-0.000003 rms=0.000365 Jy/beam ! Combined flux in latest and established models = 0.225439 Jy keep ! Adding 254 model components to the UV plane model. ! The established model now contains 313 components and 0.225439 Jy ![Exited script file: muppet] wmap "J0508+8432_S_2017_10_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.456 x 5.986 at -0.557 degrees (North through East) ! Clean map min=-0.0028552 max=0.20879 Jy/beam ! Writing clean map to FITS file: J0508+8432_S_2017_10_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.208786 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000364625 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.523921 0.523921 1.04784 2.09568 4.19137 8.38273 16.7655 33.5309 67.0619 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.001 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.208 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.456 x 5.986 at -0.557 degrees (North through East) ! Clean map min=-0.0028552 max=0.20879 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0508+8432_S_2017_10_09_pus_uvs.log closed on Sun May 12 13:04:51 2019