! Started logfile: J0508+8432_S_2017_07_16_pus_uvs.log on Thu May 9 11:02:02 2019 obs J0508+8432_S_2017_07_16_pus_uva.fits ! Reading UV FITS file: J0508+8432_S_2017_07_16_pus_uva.fits ! AN table 1: 12 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.722222 visibilities/baseline/integration-bin. ! Found source: J0508+8432 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 815 lines of history. ! ! Reading 1560 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0508+8432_S_2017_07_16_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 18 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 18 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 18 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 78 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.782951Jy sigma=0.006862 ! Fit after self-cal, rms=0.773411Jy sigma=0.006781 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.427 mas, bmaj=10.7 mas, bpa=5.872 degrees ! Estimated noise=3002.26 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.177653 Jy ! Component: 100 - total flux cleaned = 0.216416 Jy ! Total flux subtracted in 100 components = 0.216416 Jy ! Clean residual min=-0.011798 max=0.013960 Jy/beam ! Clean residual mean=-0.000015 rms=0.003256 Jy/beam ! Combined flux in latest and established models = 0.216416 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.216416 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086800Jy sigma=0.000718 ! Fit after self-cal, rms=0.086797Jy sigma=0.000718 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.855 mas, bmaj=11.34 mas, bpa=6.158 degrees ! Estimated noise=2330.16 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0124591 Jy ! Component: 100 - total flux cleaned = 0.0180625 Jy ! Component: 150 - total flux cleaned = 0.0198692 Jy ! Component: 200 - total flux cleaned = 0.0211185 Jy ! Total flux subtracted in 200 components = 0.0211185 Jy ! Clean residual min=-0.007942 max=0.006731 Jy/beam ! Clean residual mean=0.000006 rms=0.001856 Jy/beam ! Combined flux in latest and established models = 0.237534 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 38 components and 0.237534 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084702Jy sigma=0.000703 ! Fit after self-cal, rms=0.084683Jy sigma=0.000703 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.00* HN 1.01 KP 1.04 ! LA 1.02 MK 1.06 NL 0.91 OV 1.00 ! PT 1.04 SC 0.92 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.00* HN 1.06 KP 1.00 ! LA 1.03 MK 1.08 NL 1.07 OV 0.90 ! PT 1.02 SC 0.85 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 1.00* HN 1.02 KP 0.95 ! LA 1.05 MK 1.04 NL 1.02 OV 0.94 ! PT 0.97 SC 1.02 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.18 KP 1.00* ! LA 0.99 MK 1.04 NL 1.00* OV 1.00* ! PT 1.00 SC 1.00* ! ! ! Fit before self-cal, rms=0.084683Jy sigma=0.000703 ! Fit after self-cal, rms=0.080976Jy sigma=0.000686 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.872 mas, bmaj=11.46 mas, bpa=6.029 degrees ! Estimated noise=2325.87 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00052169 Jy ! Component: 100 - total flux cleaned = 0.00082094 Jy ! Component: 150 - total flux cleaned = 0.00101315 Jy ! Component: 200 - total flux cleaned = 0.0010936 Jy ! Total flux subtracted in 200 components = 0.0010936 Jy ! Clean residual min=-0.005682 max=0.005493 Jy/beam ! Clean residual mean=-0.000003 rms=0.001365 Jy/beam ! Combined flux in latest and established models = 0.238628 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 53 components and 0.238628 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080886Jy sigma=0.000685 ! Fit after self-cal, rms=0.080878Jy sigma=0.000685 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080878Jy sigma=0.000685 ! Fit after self-cal, rms=0.080876Jy sigma=0.000685 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.87 mas, bmaj=11.46 mas, bpa=6.03 degrees ! Estimated noise=2327.82 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00102049 Jy ! Component: 100 - total flux cleaned = 0.00134319 Jy ! Component: 150 - total flux cleaned = 0.00144098 Jy ! Component: 200 - total flux cleaned = 0.00149751 Jy ! Total flux subtracted in 200 components = 0.00149751 Jy ! Clean residual min=-0.005677 max=0.005422 Jy/beam ! Clean residual mean=-0.000003 rms=0.001349 Jy/beam ! Combined flux in latest and established models = 0.240125 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 57 components and 0.240125 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080838Jy sigma=0.000685 ! Fit after self-cal, rms=0.080831Jy sigma=0.000685 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000206245 Jy ! Component: 100 - total flux cleaned = 0.000203905 Jy ! Component: 150 - total flux cleaned = 0.000180761 Jy ! Component: 200 - total flux cleaned = 0.000160657 Jy ! Total flux subtracted in 200 components = 0.000160657 Jy ! Clean residual min=-0.005653 max=0.005388 Jy/beam ! Clean residual mean=-0.000002 rms=0.001344 Jy/beam ! Combined flux in latest and established models = 0.240286 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 62 components and 0.240286 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080817Jy sigma=0.000685 ! Fit after self-cal, rms=0.080813Jy sigma=0.000685 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080813Jy sigma=0.000685 ! Fit after self-cal, rms=0.080746Jy sigma=0.000685 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.867 mas, bmaj=11.46 mas, bpa=6.024 degrees ! Estimated noise=2327.38 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000856837 Jy ! Component: 100 - total flux cleaned = 0.00106416 Jy ! Component: 150 - total flux cleaned = 0.0011085 Jy ! Component: 200 - total flux cleaned = 0.0011077 Jy ! Total flux subtracted in 200 components = 0.0011077 Jy ! Clean residual min=-0.005638 max=0.005290 Jy/beam ! Clean residual mean=-0.000003 rms=0.001333 Jy/beam ! Combined flux in latest and established models = 0.241394 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 65 components and 0.241394 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080730Jy sigma=0.000685 ! Fit after self-cal, rms=0.080727Jy sigma=0.000685 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.3198e-05 Jy ! Component: 100 - total flux cleaned = 9.11149e-05 Jy ! Component: 150 - total flux cleaned = 5.85568e-05 Jy ! Component: 200 - total flux cleaned = 7.35434e-05 Jy ! Total flux subtracted in 200 components = 7.35434e-05 Jy ! Clean residual min=-0.005613 max=0.005264 Jy/beam ! Clean residual mean=-0.000003 rms=0.001330 Jy/beam ! Combined flux in latest and established models = 0.241467 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 67 components and 0.241467 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080719Jy sigma=0.000685 ! Fit after self-cal, rms=0.080718Jy sigma=0.000684 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080718Jy sigma=0.000684 ! Fit after self-cal, rms=0.080678Jy sigma=0.000684 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.672 mas, bmaj=12.87 mas, bpa=2.098 degrees ! Estimated noise=3026.43 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00134187 Jy ! Component: 100 - total flux cleaned = 0.00149507 Jy ! Component: 150 - total flux cleaned = 0.00149406 Jy ! Component: 200 - total flux cleaned = 0.00149436 Jy ! Total flux subtracted in 200 components = 0.00149436 Jy ! Clean residual min=-0.005783 max=0.005414 Jy/beam ! Clean residual mean=-0.000003 rms=0.001563 Jy/beam ! Combined flux in latest and established models = 0.242962 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 72 components and 0.242962 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080683Jy sigma=0.000684 ! Fit after self-cal, rms=0.080687Jy sigma=0.000684 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.12262e-05 Jy ! Component: 100 - total flux cleaned = 2.11444e-05 Jy ! Component: 150 - total flux cleaned = 5.27161e-05 Jy ! Component: 200 - total flux cleaned = 6.79919e-05 Jy ! Total flux subtracted in 200 components = 6.79919e-05 Jy ! Clean residual min=-0.005711 max=0.005350 Jy/beam ! Clean residual mean=-0.000002 rms=0.001539 Jy/beam ! Combined flux in latest and established models = 0.24303 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 76 components and 0.24303 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080700Jy sigma=0.000685 ! Fit after self-cal, rms=0.080702Jy sigma=0.000685 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.864 mas, bmaj=11.46 mas, bpa=6.021 degrees ! Estimated noise=2327 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.864 x 11.46 at 6.021 degrees (North through East) ! Clean map min=-0.005222 max=0.22855 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.439 mas, bmaj=10.85 mas, bpa=5.777 degrees ! Estimated noise=3004.29 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.177292 Jy ! Component: 100 - total flux cleaned = 0.216028 Jy ! Component: 150 - total flux cleaned = 0.225587 Jy ! Component: 200 - total flux cleaned = 0.230672 Jy ! Total flux subtracted in 200 components = 0.230672 Jy ! Clean residual min=-0.008164 max=0.007856 Jy/beam ! Clean residual mean=-0.000008 rms=0.002073 Jy/beam ! Combined flux in latest and established models = 0.230672 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 0.230672 Jy ! Inverting map and beam ! Estimated beam: bmin=2.864 mas, bmaj=11.46 mas, bpa=6.021 degrees ! Estimated noise=2327 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0049913 Jy ! Component: 100 - total flux cleaned = 0.00775933 Jy ! Component: 150 - total flux cleaned = 0.0095944 Jy ! Component: 200 - total flux cleaned = 0.010872 Jy ! Total flux subtracted in 200 components = 0.010872 Jy ! Clean residual min=-0.005538 max=0.005320 Jy/beam ! Clean residual mean=-0.000004 rms=0.001344 Jy/beam ! Combined flux in latest and established models = 0.241544 Jy ! Adding 18 model components to the UV plane model. ! The established model now contains 37 components and 0.241544 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.672 mas, bmaj=12.87 mas, bpa=2.098 degrees ! Estimated noise=3026.43 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00168312 Jy ! Component: 100 - total flux cleaned = 0.00176375 Jy ! Component: 150 - total flux cleaned = 0.00171832 Jy ! Component: 200 - total flux cleaned = 0.00173752 Jy ! Total flux subtracted in 200 components = 0.00173752 Jy ! Clean residual min=-0.005722 max=0.005339 Jy/beam ! Clean residual mean=-0.000002 rms=0.001532 Jy/beam ! Combined flux in latest and established models = 0.243282 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.59033e-05 Jy ! Component: 100 - total flux cleaned = 7.0189e-05 Jy ! Component: 150 - total flux cleaned = 0.000101587 Jy ! Component: 200 - total flux cleaned = 0.000116568 Jy ! Total flux subtracted in 200 components = 0.000116568 Jy ! Clean residual min=-0.005686 max=0.005353 Jy/beam ! Clean residual mean=-0.000002 rms=0.001526 Jy/beam ! Combined flux in latest and established models = 0.243398 Jy ! Adding 14 model components to the UV plane model. ! The established model now contains 49 components and 0.243398 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.864 mas, bmaj=11.46 mas, bpa=6.021 degrees ! Estimated noise=2327 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000171302 Jy ! Component: 100 - total flux cleaned = -1.44356e-05 Jy ! Component: 150 - total flux cleaned = -7.49852e-05 Jy ! Component: 200 - total flux cleaned = -0.000151858 Jy ! Total flux subtracted in 200 components = -0.000151858 Jy ! Clean residual min=-0.005380 max=0.005280 Jy/beam ! Clean residual mean=-0.000002 rms=0.001328 Jy/beam ! Combined flux in latest and established models = 0.243247 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 56 components and 0.243247 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080744Jy sigma=0.000685 ! Fit after self-cal, rms=0.080736Jy sigma=0.000685 wmodel J0508+8432_S_2017_07_16_pus_map.mod ! Writing 56 model components to file: J0508+8432_S_2017_07_16_pus_map.mod wobs J0508+8432_S_2017_07_16_pus_uvs.fits ! Writing UV FITS file: J0508+8432_S_2017_07_16_pus_uvs.fits wwins J0508+8432_S_2017_07_16_pus_map.win ! wwins: Wrote 1 windows to J0508+8432_S_2017_07_16_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000209362 Jy ! Component: 100 - total flux cleaned = 4.59594e-05 Jy ! Component: 150 - total flux cleaned = 0.00075683 Jy ! Component: 200 - total flux cleaned = 0.00134948 Jy ! Component: 250 - total flux cleaned = 0.00191158 Jy ! Component: 300 - total flux cleaned = 0.00238068 Jy ! Component: 350 - total flux cleaned = 0.00263959 Jy ! Component: 400 - total flux cleaned = 0.0031354 Jy ! Component: 450 - total flux cleaned = 0.00337487 Jy ! Component: 500 - total flux cleaned = 0.00343312 Jy ! Component: 550 - total flux cleaned = 0.00354588 Jy ! Component: 600 - total flux cleaned = 0.00354644 Jy ! Component: 650 - total flux cleaned = 0.00365336 Jy ! Component: 700 - total flux cleaned = 0.00375669 Jy ! Component: 750 - total flux cleaned = 0.00360727 Jy ! Component: 800 - total flux cleaned = 0.00370535 Jy ! Component: 850 - total flux cleaned = 0.00356304 Jy ! Component: 900 - total flux cleaned = 0.00351583 Jy ! Component: 950 - total flux cleaned = 0.0034248 Jy ! Component: 1000 - total flux cleaned = 0.00338008 Jy ! Component: 1050 - total flux cleaned = 0.00329152 Jy ! Component: 1100 - total flux cleaned = 0.00320514 Jy ! Component: 1150 - total flux cleaned = 0.00303815 Jy ! Component: 1200 - total flux cleaned = 0.00312124 Jy ! Component: 1250 - total flux cleaned = 0.00299966 Jy ! Component: 1300 - total flux cleaned = 0.00292036 Jy ! Component: 1350 - total flux cleaned = 0.00288215 Jy ! Component: 1400 - total flux cleaned = 0.00299629 Jy ! Component: 1450 - total flux cleaned = 0.00292073 Jy ! Component: 1500 - total flux cleaned = 0.00303152 Jy ! Component: 1550 - total flux cleaned = 0.00306781 Jy ! Component: 1600 - total flux cleaned = 0.00313933 Jy ! Component: 1650 - total flux cleaned = 0.00306872 Jy ! Component: 1700 - total flux cleaned = 0.00310352 Jy ! Component: 1750 - total flux cleaned = 0.00306985 Jy ! Component: 1800 - total flux cleaned = 0.00310348 Jy ! Component: 1850 - total flux cleaned = 0.00316878 Jy ! Component: 1900 - total flux cleaned = 0.00303757 Jy ! Component: 1950 - total flux cleaned = 0.00310194 Jy ! Component: 2000 - total flux cleaned = 0.00307013 Jy ! Component: 2050 - total flux cleaned = 0.00303917 Jy ! Component: 2100 - total flux cleaned = 0.0030393 Jy ! Component: 2150 - total flux cleaned = 0.00297881 Jy ! Component: 2200 - total flux cleaned = 0.00288829 Jy ! Component: 2250 - total flux cleaned = 0.00279908 Jy ! Component: 2300 - total flux cleaned = 0.00268124 Jy ! Component: 2350 - total flux cleaned = 0.00259411 Jy ! Component: 2400 - total flux cleaned = 0.0025367 Jy ! Component: 2450 - total flux cleaned = 0.00247936 Jy ! Component: 2500 - total flux cleaned = 0.00253574 Jy ! Component: 2550 - total flux cleaned = 0.002339 Jy ! Component: 2600 - total flux cleaned = 0.00233891 Jy ! Component: 2650 - total flux cleaned = 0.00222863 Jy ! Component: 2700 - total flux cleaned = 0.00228329 Jy ! Component: 2750 - total flux cleaned = 0.00222888 Jy ! Component: 2800 - total flux cleaned = 0.00217513 Jy ! Component: 2850 - total flux cleaned = 0.00212185 Jy ! Component: 2900 - total flux cleaned = 0.00206907 Jy ! Component: 2950 - total flux cleaned = 0.00209531 Jy ! Component: 3000 - total flux cleaned = 0.0021212 Jy ! Component: 3050 - total flux cleaned = 0.00199193 Jy ! Component: 3100 - total flux cleaned = 0.00191485 Jy ! Component: 3150 - total flux cleaned = 0.00183827 Jy ! Component: 3200 - total flux cleaned = 0.00178745 Jy ! Component: 3250 - total flux cleaned = 0.00173707 Jy ! Component: 3300 - total flux cleaned = 0.00163656 Jy ! Component: 3350 - total flux cleaned = 0.00153675 Jy ! Component: 3400 - total flux cleaned = 0.00143734 Jy ! Component: 3450 - total flux cleaned = 0.00131375 Jy ! Component: 3500 - total flux cleaned = 0.00114137 Jy ! Component: 3550 - total flux cleaned = 0.00106787 Jy ! Component: 3600 - total flux cleaned = 0.000945642 Jy ! Component: 3650 - total flux cleaned = 0.00079949 Jy ! Component: 3700 - total flux cleaned = 0.000702467 Jy ! Component: 3750 - total flux cleaned = 0.000557381 Jy ! Component: 3800 - total flux cleaned = 0.000533322 Jy ! Component: 3850 - total flux cleaned = 0.000437155 Jy ! Component: 3900 - total flux cleaned = 0.000317487 Jy ! Component: 3950 - total flux cleaned = 0.000293641 Jy ! Component: 4000 - total flux cleaned = 0.000198459 Jy ! Component: 4050 - total flux cleaned = 0.000103438 Jy ! Total flux subtracted in 4096 components = 5.60439e-05 Jy ! Clean residual min=-0.001366 max=0.001287 Jy/beam ! Clean residual mean=0.000000 rms=0.000407 Jy/beam ! Combined flux in latest and established models = 0.243303 Jy keep ! Adding 256 model components to the UV plane model. ! The established model now contains 312 components and 0.243303 Jy ![Exited script file: muppet] wmap "J0508+8432_S_2017_07_16_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.864 x 11.46 at 6.021 degrees (North through East) ! Clean map min=-0.0032672 max=0.22929 Jy/beam ! Writing clean map to FITS file: J0508+8432_S_2017_07_16_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.229292 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000399125 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.522206 0.522206 1.04441 2.08882 4.17765 8.3553 16.7106 33.4212 66.8424 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0011 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.229 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.864 x 11.46 at 6.021 degrees (North through East) ! Clean map min=-0.0032672 max=0.22929 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0508+8432_S_2017_07_16_pus_uvs.log closed on Thu May 9 11:02:07 2019